Hot Disk
Filter
Showing all 4 results
| Brand | Hot Disk |
|---|---|
| Origin | Sweden |
| Model | 2500S |
| Measurement Principle | Transient Plane Source (TPS) Method |
| Thermal Conductivity Range | 0.005–2000 W/m·K |
| Temperature Range | 30 K to 1000 °C |
| Accuracy | ±3% |
| Repeatability | <1% |
| Sample Forms | Solids, Liquids, Powders, Pastes, Thin Films, Coatings, Anisotropic & Composite Materials |
| Test Atmosphere | Air, Vacuum, or Inert Gas |
| Dimensions (L×W×H) | 500 × 450 × 320 mm |
| Probe Diameter Options | 2–29.4 mm |
| Additional Outputs | Thermal Diffusivity (±5%), Volumetric Heat Capacity (±7%) |
| Brand | Hot Disk |
|---|---|
| Origin | Sweden |
| Model | TPS 1500 |
| Measurement Principle | Transient Plane Source (TPS) Method |
| Thermal Conductivity Range | 0.005–20 W/m·K |
| Temperature Range | −50 to 750 °C |
| Accuracy | < ±3% |
| Repeatability | < ±1% |
| Sample Forms | Solids, Powders, Pastes, Anisotropic & Composite Materials |
| Test Atmosphere | Air, Vacuum, or Inert Gas |
| Dimensions (L×W×H) | 50 × 40 × 30 cm |
| Probe Sizes | 2–29.4 mm |
| Compliance | ISO 22007-2 |
| Brand | Hot Disk |
|---|---|
| Origin | Sweden |
| Model | TPS 2500S |
| Measurement Principle | Transient Plane Source (TPS) Method |
| Thermal Conductivity Range | 0.005–2000 W/m·K |
| Temperature Range | 30 K to 1000 °C |
| Accuracy | < 3% |
| Repeatability | < 1% |
| Sample Forms | Solids, Liquids, Powders, Pastes, Thin Films, Coatings, Anisotropic & Composite Materials |
| Test Atmosphere | Air, Vacuum, or Inert Gas |
| Dimensions (L×W×H) | 500 × 450 × 320 mm |
| Compatible Modules | Basic, Thin-Film, Plate, Anisotropy, Single-Sided, Specific Heat |
| Brand | Hot Disk |
|---|---|
| Origin | Sweden |
| Model | TPS3500 |
| Measurement Principle | Transient Plane Source (TPS) Method |
| Thermal Conductivity Range | 0.005–2000 W/(m·K) |
| Thermal Diffusivity Range | 0.01–1200 mm²/s |
| Volumetric Heat Capacity Range | up to 5 MJ/(m³·K) |
| Temperature Range | 30 K to 1000 °C |
| Minimum Test Duration | 0.1 s |
| Accuracy | < 3% |
| Repeatability | < 1% |
| Sample Forms | Solids, Liquids, Powders, Pastes, Thin Films, Coatings, Anisotropic & Composite Materials |
| Test Atmosphere | Air, Vacuum, or Inert Gas |
| Sample Dimensions (Min) | 2 mm diameter × 0.5 mm thickness (bulk), 8 mm diameter × 0.1 mm thickness (thin films) |
| Dimensions (L×W×H) | 600 × 460 × 330 mm |
| Compliance | ISO 22007-2:2008 |