IKA
Filter
Showing 331–360 of 688 results
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MATRIX Orbital Delta F2.0 |
| Orbit Diameter | 3 mm |
| Max Load | 0.3 kg |
| Speed Range | 0–1500 rpm |
| Min Adjustable Speed | 300 rpm |
| Speed Accuracy | ±30 rpm |
| Speed Resolution | 10 rpm steps |
| Timer Range | 1 s – 6000 min |
| Heating Range | RT +4 °C to 100 °C |
| Heating Power | 100 W |
| Temp. Control Accuracy | ±0.5 °C |
| Temp. Uniformity | ±0.5 °C (20–45 °C), ±1.5 °C (>45 °C) |
| Heating Rate | 13 °C/min |
| Sample Capacity | 24 × 2.0 mL tubes |
| Dimensions (W×D×H) | 216 × 158 × 351 mm |
| Weight | 9.2 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Protection Class | IP21 |
| Interfaces | RS232, USB |
| Power Supply | 100–240 V, 50/60 Hz |
| Max Input Power | 240 W |
| Fuse | 2 × T4A 250V |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MATRIX Orbital Delta FP |
| Operating Principle | Orbital Shaking with Integrated Peltier Heating |
| Speed Range | 0–2000 rpm |
| Orbit Diameter | 3 mm |
| Max Load | 0.3 kg |
| Temperature Range | RT +4 °C to 100 °C |
| Temp Stability | ±0.5 °C (20–45 °C) |
| Temp Uniformity | ±0.5 °C (20–45 °C) |
| Heating Power | 100 W |
| Ramp Rate | 18 °C/min |
| Display | TFT Screen (Speed & Temp) |
| Timer Range | 1 s – 6000 min |
| Input Power | 240 W |
| Voltage | 100–240 V, 50/60 Hz |
| Enclosure Rating | IP21 |
| Interfaces | RS232, USB |
| Dimensions (W×D×H) | 216 × 147 × 351 mm |
| Weight | 9.2 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Temperature-Controlled Orbital Shaker |
| Model | Matrix Orbital Delta Plus |
| Timing Range | 1 s – 6000 min |
| Orbital Speed | 0–3000 rpm |
| Orbit Diameter | 3 mm |
| Temperature Range | RT−15 °C to 100 °C |
| Heating Rate | up to 6 °C/min |
| Cooling Rate | up to 0.8 °C/min |
| Programmable Ramp Control | Yes |
| Display | TFT touchscreen |
| Interfaces | RS232, USB |
| IP Rating | IP21 |
| Dimensions (W×D×H) | 216 × 127 × 351 mm |
| Weight | 10 kg |
| Power Input | 100–240 V, 50/60 Hz, max. 230 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MATRIX Orbital |
| Orbit Diameter | 3 mm |
| Max Load | 0.3 kg |
| Speed Range | 0–3000 rpm |
| Min Adjustable Speed | 300 rpm |
| Speed Accuracy | ±30 rpm |
| Speed Resolution | 10 rpm steps |
| Timer Range | 1 s – 6000 min |
| Display | TFT |
| Operation Modes | Timed & Continuous |
| Compatible Plates | Microtiter (96-well), PCR, Deep Well (DWP), 24×0.5 mL / 24×1.5 mL / 24×2.0 mL tubes |
| Dimensions (W×D×H) | 200 × 120 × 320 mm |
| Weight | 7.2 kg |
| Ambient Temp. Range | 5–40 °C |
| Relative Humidity | ≤80% RH |
| Ingress Protection | IP21 (per DIN EN 60529) |
| Interfaces | RS232, USB |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Rated Power | 80 W |
| Fuse | 2×T4A 250V |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Imported |
| Model | IKA Matrix Orbital |
| Instrument Type | Ambient-Temperature Orbital Shaker |
| Timer Range | 1 s – 6000 min |
| Oscillation Frequency | 0–3000 rpm |
| Orbit Diameter | 3 mm |
| Temperature Control | Ambient Only |
| Platform Quantity | 1 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Type | Magnetic Stirrer |
| Model | Maxi MR 1 |
| Maximum Stirring Volume | 150 L (H₂O) |
| Speed Range | 0–600 rpm |
| Display | LED/LCD Digital Speed Readout |
| Timer Function | 0–56 min or Continuous Operation |
| Motor Input Power | 80 W |
| Motor Output Power | 35 W |
| Max Stir Bar Length | 155 mm |
| Plate Material | Stainless Steel 1.4301 (AISI 304) |
| Plate Dimensions | 500 × 500 mm |
| Overall Dimensions | 505 × 110 × 585 mm |
| Weight | 16 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Ingress Protection | IP21 |
| Voltage | 230 V / 100–120 V |
| Frequency | 50/60 Hz |
| Compliance | DIN EN 60529 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Product Category | Imported |
| Model | Maxi MR 1 digital |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 150 L (H₂O) |
| Speed Range | 0–600 rpm |
| Motor Output Power | 35 W |
| Stir Bar Max Length | 155 mm |
| Working Plate Material | Stainless Steel 1.4301 |
| Plate Dimensions | 500 × 500 mm |
| Timer Range | 0–56 min (or continuous) |
| Interface | RS 232 and USB |
| Protection Rating | IP21 |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Input Voltage | 230 V / 100–120 V |
| Frequency | 50/60 Hz |
| Input Power | 80 W |
| Net Weight | 21.36 kg |
| Dimensions (W × H × D) | 505 × 110 × 585 mm |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Maxi MR 1 |
| Display | LED digital speed & timer |
| Speed Range | 0–600 rpm |
| Max. Stirring Volume (H₂O) | 150 L per position |
| Stirring Position | 1 |
| Max. Stir Bar Length | 155 mm |
| Motor Input Power | 80 W |
| Motor Output Power | 35 W |
| Plate Material | Stainless Steel 1.4301 |
| Plate Dimensions | 500 × 500 mm |
| Overall Dimensions | 505 × 110 × 585 mm |
| Weight | 16 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Class | IP21 (DIN EN 60529) |
| Voltage | 230 V / 100–120 V |
| Frequency | 50/60 Hz |
| Timer Range | 0–56 min or continuous operation |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF 10 basic Microfine Grinder Drive |
| Motor Input Power | 1000 W |
| Motor Output Power | 500 W |
| Speed Range | 3000 – 6500 rpm |
| Continuous Operation Time | 120 min (ON) / 30 min (OFF) |
| Cooling | Dry ice compatible in grinding chamber |
| Dimensions (W × D × H) | 320 × 380 × 300 mm |
| Weight | 9.7 kg |
| Ambient Temperature Range | 5 – 40 °C |
| Relative Humidity Limit | ≤80 % |
| Protection Class | IP 22 (DIN EN 60529) |
| Voltage | 230 V, 50/60 Hz |
| Optional Voltages | 115 V or 100–115 V |
| Grinding Principle | Shear and Impact |
| Material Contact Surfaces | Stainless Steel |
| Grind Head & Sieve | Sold Separately |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Benchtop Microfine Grinder |
| Model | MF 10 basic |
| Input Power | 1000 W |
| Output Power | 500 W |
| Speed Range | 3000–6500 rpm |
| Max. Feed Size | <15 mm |
| Final Particle Size | 0.01–0.5 mm (typical output ≤0.25 mm with appropriate sieve) |
| Continuous Operation Time | up to 120 min |
| Cooling | Optional dry ice cooling in grinding chamber |
| Dimensions (W×D×H) | 320 × 380 × 300 mm |
| Weight | 9.7 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class | IP22 (DIN EN 60529) |
| Voltage/Frequency | 230 V / 50 Hz or 115 V / 60 Hz |
| Grinding Principle | High-speed shear and impact |
| Material Contact Parts | Stainless steel (AISI 304) |
| Sieve & Grinding Head | Sold separately |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF 10.1 |
| Maximum Peripheral Speed | 24.5 m/s |
| Maximum Feed Particle Size | 15 mm |
| Grinding Chamber Material | Stainless Steel 1.4308 (AISI 304 equivalent) |
| Cooling Capability | Dry Ice Integration in Grinding Chamber |
| Dimensions (W × D × H) | 320 × 560 × 300 mm |
| Weight | 2.633 kg |
| Sieve Compatibility | Interchangeable stainless steel sieves (optional, not included) |
| Collection Vessel | Standard NS 29 threaded container |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF 10.2 Impact Grinding Head |
| Operating Principle | Impact Milling |
| Maximum Peripheral Speed | 34 m/s |
| Maximum Feed Hardness | 6 Mohs |
| Maximum Feed Particle Size | 10 mm |
| Grinding Chamber Material | Stainless Steel 1.4308 (AISI 304 equivalent) |
| Cooling Option | Dry Ice Insertion in Grinding Chamber |
| Dimensions (W × D × H) | 320 × 450 × 300 mm |
| Weight | 2.942 kg |
| Sieve Compatibility | Interchangeable stainless steel sieves (sold separately) |
| Collection Vessel | Standard NS 29 threaded container |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Type | Impact Grinding Head for Laboratory Milling Systems |
| Model | MF 10.2 |
| Application | Dry grinding of brittle, hard materials (e.g., minerals, construction aggregates) |
| Max. Feed Hardness | 6 Mohs |
| Max. Feed Size | <10 mm |
| Output Particle Size Range | 0.01–0.5 mm (screen-dependent) |
| Typical Final Output Size | <0.25 mm (with standard 0.25 mm sieve) |
| Grinding Chamber Material | Stainless Steel 1.4308 (AISI 304 equivalent) |
| Max. Peripheral Speed | 34 m/s |
| Cooling Option | Dry ice cooling compatible |
| Dimensions (W × D × H) | 320 × 450 × 300 mm |
| Weight | 2.942 kg |
| Compliance | CE-marked, designed per EN 61000-6-2/6-4 and EN 60204-1 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF10 |
| Instrument Type | Grinder |
| Sample Applicability | Hard and brittle materials |
| Output Particle Size | < 0.01 mm |
| Motor Input/Output Power | 1000 / 500 W |
| Speed Range | 3000–6500 rpm |
| Tip Linear Velocity (MF10.1 Shear Rotor) | 22.5 m/s |
| Tip Linear Velocity (MF10.2 Impact Rotor) | 31.4 m/s |
| Wetted Materials | AISI 316L stainless steel |
| Duty Cycle | 120 min ON / 30 min OFF |
| Overload Protection | Yes |
| Weight | 9.7 kg |
| Dimensions (W×D×H) | 320 × 300 × 380 mm |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Ingress Protection Rating | IP22 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | MF 10.1 Cutting-Grinding Head |
| Instrument Type | Laboratory Grinder |
| Sample Applicability | Rigid, fibrous, and low-density materials (e.g., paper, vegetables, plastics) |
| Feed Particle Size | <15 mm |
| Discharge Particle Size | 0.01–0.5 mm (adjustable via interchangeable sieves) |
| Final Output Particle Size | <0.25 mm |
| Grinding Chamber Material | Stainless Steel 1.4308 (AISI 304 equivalent) |
| Maximum Peripheral Speed | 24.5 m/s |
| Cooling Option | Dry ice cooling compatible in grinding chamber |
| Dimensions (W×H×D) | 320 × 560 × 300 mm |
| Weight | 2.633 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MICROSTAR 15 control |
| Max. Stirring Volume (H₂O) | 10 L |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Drive Principle | Brushless DC Motor |
| Speed Display | LCD |
| Speed Range | 0/30–1000 rpm |
| Max. Viscosity | 20,000 mPa·s |
| Max. Output Power at Shaft | 15.7 W |
| Continuous Duty Cycle | 100 % |
| Max. Torque at Shaft | 15 N·cm |
| Speed Control | Analog Knob |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Stirrer Shaft Fixation | Fixed Chuck |
| External Temperature Sensor Interface | PT1000 |
| Temperature Display | Yes |
| Chuck Clamping Range | Ø 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at Standstill) | Yes |
| Support Arm Diameter | 13 mm |
| Support Arm Length | 160 mm |
| Torque Display | Yes |
| Rated Torque | 0.15 N·m |
| Torque Measurement Deviation | ±3 N·cm |
| Timer | Yes |
| Timer Display | LCD |
| Timer Range | 0–6000 min |
| Temp. Range (Sensor) | −10 to +350 °C |
| Temp. Measurement Accuracy | 0.1 K |
| PT1000 Accuracy | ±0.5 K (DIN EN 60751 Class A) |
| Temp. Sensor Max. Deviation | ≤ ±(0.15 + 0.002× |
| Housing Material | Cast Aluminum Coating / Thermoplastic Polymer |
| Dimensions (W×H×D) | 60 × 173 × 136 mm |
| Weight | 1.26 kg |
| Ambient Operating Temp. | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 |
| USB Interface | Yes |
| Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| DC Supply | 24 V = |
| Current Draw | 1300 mA |
| Vibration Detection | Yes (Auto-Shutdown) |
| Bluetooth | Yes |
| Compatible Software | labworldsoft® |
| Key Lock Function | Yes |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Electronic Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 5 L |
| Speed Range | 30–1000 rpm |
| Temperature Control Range | –10 °C to 350 °C |
| Max. Viscosity | 20,000 mPa·s |
| Motor Output Power | 22 W |
| Max. Torque | 15 N·cm |
| Display | LCD with real-time speed, torque, and temperature |
| Interface | USB, Bluetooth, PT1000 temperature sensor input |
| Protection Rating | IP54 |
| Dimensions (W×H×D) | 60 × 173 × 136 mm |
| Weight | 1.26 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MICROSTAR 15 digital |
| Max. Stirring Volume (H₂O) | 10 L |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Drive Type | Brushless DC Motor |
| Speed Display | LED |
| Speed Range | 0/50–1000 rpm |
| Max. Viscosity | 8000 mPa·s |
| Max. Output Power (Stirring Shaft) | 15.7 W |
| Continuous Duty Cycle | 100 % |
| Max. Torque (Shaft) | 15 N·cm |
| Speed Control | Analog Knob |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Clamp Type | Fixed Chuck |
| Chuck Diameter Range | 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Rated Torque | 0.15 N·m |
| Timer Display | None |
| Housing Material | Die-cast aluminum with thermoplastic polymer coating |
| Dimensions (W × H × D) | 60 × 173 × 126 mm |
| Weight | 1.26 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 (per DIN EN 60529) |
| USB Interface | Yes |
| Input Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Standby Power Consumption | 0.3 W |
| DC Supply | 24 V = |
| Current Draw | 1300 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Digital Overhead Stirrer |
| Model | MICROSTAR 15 digital |
| Maximum Mixing Volume | 10 L (H₂O) |
| Speed Range | 0/50–1000 rpm |
| Motor Type | Brushless DC Motor |
| Max Torque | 15 N·cm |
| Power Input | 32 W |
| Continuous Duty Cycle | 100% |
| Display | LED |
| Speed Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Speed Control | Precision Knob |
| Shaft Clamping Range | 0.5–8 mm |
| Hollow Shaft ID | 8.5 mm |
| IP Rating | IP54 |
| Dimensions (W × H × D) | 60 × 173 × 126 mm |
| Weight | 1.26 kg |
| Operating Ambient | 5–40 °C, ≤80% RH |
| USB Interface | Yes |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Standby Power | 0.3 W |
| DC Output | 24 V =, 1300 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MICROSTAR 30 control |
| Max. Stirring Volume (H₂O) | 20 L |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Drive Principle | Brushless DC Motor |
| Speed Display | LCD |
| Speed Range | 0/30–500 rpm |
| Max. Viscosity | 20,000 mPa·s |
| Max. Output Power at Shaft | 15.7 W |
| Duty Cycle | 100 % |
| Max. Torque | 30 N·cm |
| Speed Control | Analog Knob |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm) / ±3 rpm (n < 300 rpm) |
| Clamp Type | Fixed Chuck |
| Chuck Capacity | Ø 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Torque Display | Yes |
| Rated Torque | 0.3 N·m |
| Torque Measurement Deviation | ±3 N·cm |
| Timer | Yes |
| Timer Display | LCD |
| Timer Range | 0–6000 min |
| Temp. Range (with PT1000) | −10 to +350 °C |
| Temp. Measurement Accuracy | 0.1 K |
| PT1000 Accuracy | ±0.5 K (DIN EN 60751 Class A) |
| Temp. Sensor Max. Deviation | ≤ ±(0.15 + 0.002× |
| Housing Material | Cast Aluminum Coating / Thermoplastic Polymer |
| Dimensions (W×H×D) | 60 × 173 × 136 mm |
| Weight | 1.26 kg |
| Ambient Temp. Range | 5–40 °C |
| Relative Humidity | ≤80 % |
| Protection Rating | IP54 |
| USB Interface | Yes |
| Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| DC Supply | 24 V = |
| Current Consumption | 1300 mA |
| Vibration Detection | Yes (Auto-shutdown on excessive vibration) |
| Bluetooth | Yes (via labworldsoft® app) |
| Remote Control Distance | Up to 150 m (site-dependent) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | MICROSTAR 30 control |
| Instrument Type | Electric Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 20 L |
| Speed Range | 30–500 rpm |
| Temperature Control Range | −10 °C to 350 °C |
| Max. Viscosity | 20,000 mPa·s |
| Motor Output Power | 22 W |
| Torque | 30 N·cm |
| IP Rating | IP54 |
| Dimensions | 60 × 173 × 136 mm |
| Weight | 1.26 kg |
| Power Supply | 100–240 V AC, 50/60 Hz |
| USB Interface | Yes |
| Bluetooth | Yes |
| PT1000 Temperature Sensor Support | Yes |
| Continuous Duty Cycle | 100% |
| Display | LCD with Real-Time Speed/Torque/Temperature |
| Enclosure Material | Anodized Aluminum Housing + Thermoplastic Polymer |
| Shaft Clamp Range | 0.5–8 mm |
| Hollow Shaft Diameter | 8.5 mm (allows probe insertion during standstill) |
| Timer Range | 0–6000 min |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MICROSTAR 30 digital |
| Max. Stirring Volume (H₂O) | 20 L |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Drive Type | Brushless DC Motor |
| Speed Display | LED |
| Speed Range | 0/50–500 rpm |
| Max. Viscosity | 20,000 mPa·s |
| Max. Output Power at Shaft | 15.7 W |
| Duty Cycle | Continuous (100 %) |
| Max. Torque at Shaft | 30 N·cm |
| Speed Control | Analog Knob |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Clamp Type | Fixed Chuck |
| Chuck Jaw Range | 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Functionality (Insertion at Standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Rated Torque | 0.3 N·m |
| Timer Display | None |
| Housing Material | Die-cast Aluminum with Thermoplastic Coating |
| Dimensions (W × H × D) | 60 × 173 × 126 mm |
| Weight | 1.26 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 (per DIN EN 60529) |
| USB Interface | Yes |
| Input Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Standby Power Consumption | 0.3 W |
| DC Supply | 24 V = |
| Current Draw | 1300 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Digital Overhead Stirrer |
| Model | MICROSTAR 30 digital |
| Max. Mixing Volume (H₂O) | 20 L |
| Speed Range | 0/50–500 rpm |
| Motor Type | Brushless DC Motor |
| Max. Torque | 30 N·cm |
| Max. Viscosity | 20,000 mPa·s |
| Display | LED |
| Speed Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Speed Control | Precision Knob |
| Protection Rating | IP54 |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Dimensions (W × H × D) | 60 × 173 × 126 mm |
| Weight | 1.26 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| USB Interface | Yes |
| Continuous Duty Cycle | 100 % |
| Shaft Clamp Range | 0.5–8 mm |
| Hollow Shaft ID | 8.5 mm |
| Extension Arm | 160 mm, Ø13 mm |
| Input Power | 32 W |
| Standby Power | 0.3 W |
| DC Output | 24 V = / 1300 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MICROSTAR 7.5 control |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Speed Range | 0/30 – 2000 rpm |
| Max. Torque | 7.5 N·cm |
| Max. Viscosity | 4000 mPa·s |
| Max. Volume (H₂O) | 5 L |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (>300 rpm), ±3 rpm (<300 rpm) |
| Temperature Range (with PT1000) | –10 to 350 °C |
| Temp. Measurement Accuracy | ±0.5 K (DIN EN 60751 Class A) |
| Torque Measurement Deviation | ±3 N·cm |
| Timer Range | 0–6000 min |
| IP Rating | IP54 |
| Dimensions (W×H×D) | 60 × 173 × 136 mm |
| Weight | 1.18 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Power Supply | 100–240 V AC, 50/60 Hz |
| USB Interface | Yes |
| Bluetooth | Yes |
| Display | LCD (speed, torque, temperature, timer) |
| Shaft Clamp Range | Ø 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Extension Arm | Ø13 mm × 160 mm |
| Continuous Duty Cycle | 100 % |
| Motor Type | Brushless DC |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Laboratory Equipment |
| Model | MICROSTAR 7.5 control |
| Instrument Type | Electronic Overhead Stirrer |
| Maximum Mixing Volume | 2 L (H₂O) |
| Speed Range | 30–2000 rpm |
| Temperature Control Range | –10 °C to 350 °C |
| Max. Viscosity | 750 mPa·s |
| Max. Torque | 7.5 N·cm |
| Motor Output Power | 22 W |
| Input Power | 32 W |
| Drive Principle | Brushless DC Motor |
| Speed Setting Accuracy | ±1 rpm (n > 300 rpm) |
| Speed Measurement Deviation | ±1% (n > 300 rpm) |
| Temperature Measurement Accuracy | ±0.5 K (DIN IEC 751 Class A, PT1000 sensor) |
| Display | LCD with real-time torque & temperature readout |
| Interface | USB (data logging, firmware update), Bluetooth (labworldsoft® integration) |
| Housing | Anodized aluminum + thermoplastic polymer |
| IP Rating | IP54 |
| Dimensions | 60 × 123 × 110 mm |
| Weight | 1.18 kg |
| Operating Ambient | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MICROSTAR 7.5 |
| Max. Volume (H₂O) | 5 L |
| Motor Input Power | 32 W |
| Motor Output Power | 22 W |
| Drive Principle | Brushless DC Motor |
| Speed Display | LED |
| Speed Range | 0/50–2000 rpm |
| Max. Viscosity | 4000 mPa·s |
| Max. Output Power at Shaft | 15.7 W |
| Duty Cycle | 100 % |
| Max. Torque | 7.5 N·cm |
| Speed Control | Analog Knob |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Clamp Type | Fixed Chuck |
| Chuck Capacity | Ø 0.5–8.2 mm |
| Hollow Shaft ID | 8.5 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Rated Torque | 0.075 N·m |
| Timer Display | None |
| Housing Material | Die-cast Aluminum Coated / Thermoplastic Polymer |
| Dimensions (W × H × D) | 60 × 173 × 126 mm |
| Weight | 1.18 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP54 (per DIN EN 60529) |
| USB Interface | Yes |
| Supply Voltage | 100–240 V AC |
| Frequency | 50/60 Hz |
| Standby Power Consumption | 0.3 W |
| DC Output | 24 V = |
| Current Draw | 1300 mA |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Digital Overhead Stirrer |
| Model | MICROSTAR 7.5 digital |
| Maximum Mixing Volume | 5 L (H₂O) |
| Speed Range | 0/50–2000 rpm |
| Motor Type | Brushless DC Motor |
| Max Torque | 7.5 N·cm |
| Max Viscosity | 4000 mPa·s |
| Power Input | 32 W |
| Dimensions (W × H × D) | 60 × 173 × 126 mm |
| Weight | 1.18 kg |
| IP Rating | IP54 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| USB Interface | Yes |
| Voltage | 100–240 V AC, 50/60 Hz |
| Standby Power Consumption | 0.3 W |
| Shaft Clamp Range | 0.5–8 mm |
| Hollow Shaft ID | 8.5 mm |
| Extension Arm Diameter | 13 mm |
| Extension Arm Length | 160 mm |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Midi MR 1 digital |
| Motor Output Power | 19 W |
| Max. Stirring Volume (H2O) | 50 L |
| Speed Range | 0–1000 rpm |
| Max. Stir Bar Length | 80 mm |
| Plate Material | Stainless Steel 1.4301 |
| Plate Dimensions | 350 × 350 mm |
| Device Dimensions | 360 × 110 × 430 mm |
| Weight | 10.7 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class | IP21 (per DIN EN 60529) |
| Interface | RS232 + USB |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Input Power | 80 W |
| Fuse | 2 × T4A, 250 V |
| Timer Range | 0–56 min (or continuous mode) |
| Heating Function | None |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Midi MR 1 digital |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume (H₂O) | 50 L |
| Speed Range | 0–1000 rpm |
| Motor Output Power | 19 W |
| Drive Interface | RS232 & USB |
| Timer Range | 0–56 min |
| Stir Bar Max Length | 80 mm |
| Working Plate Material | Stainless Steel 1.4301 |
| Plate Dimensions | 350 × 350 mm |
| Device Dimensions (W × H × D) | 360 × 110 × 430 mm |
| Weight | 10.7 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Protection Class | IP21 (DIN EN 60529) |
| Input Voltage | 100–120 V / 230 V, 50/60 Hz |
| Input Power | 70 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | mini G |
| Instrument Type | Benchtop Microcentrifuge |
| Speed | 6000 rpm |
| Max Capacity | 8 × 2.0 mL |
| Dimensions | 155 × 105 × 175 mm |
| Weight | 1.4 kg |
| Power Supply | 100–240 V, 50/60 Hz |
| Input Power | 12 W |
| Protection Class | IP30 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| Acceleration | 2000 × g |
| Rotor Type | Fixed-angle rotor |
| Timer Range | 1–99 min |
| Timer Display | LED |
| Auto-Rotor Recognition | No |
| Quick-Stop Function | Yes |
| Lid Safety Interlock | Yes |
| Tool-Free Rotor Exchange | Yes |
| Noise Level | <45 dB(A) |
| Continuous Operation Duty Cycle | 100 % |
| Compliance | DIN EN 60529, IEC 61010-1 |