KPM Sensortech
Filter
Showing all 4 results
| Brand | KPM Sensortech |
|---|---|
| Origin | USA |
| Model | IMPS-4400 |
| Sensor Resolution | 2 in (50 mm) per element |
| Array Width Capacity | up to 256 in (6.5 m) |
| Data Sampling Rate | 33 Hz (30 ms interval) |
| Output Interfaces | 4–20 mA, 0–10 VDC, 0–5 VDC |
| Compliance | Designed for industrial process integration per ISA-88/ISA-95 architecture |
| Software | Proprietary real-time moisture visualization and statistical analytics suite |
| Brand | KPM Sensortech |
|---|---|
| Origin | USA |
| Model | NIR-6000 |
| Instrument Type | Online Near-Infrared Spectrometer |
| Principle | Filter-Based NIR Reflectance |
| Wavelength Range | 550–2500 nm |
| Measurement Interval | User-Configurable (as low as 4 ms) |
| Sampling Mode | Diffuse Reflectance |
| Scan Speed | Real-Time |
| Chemometrics Software | Embedded KPM NIR Analysis Suite |
| Operating Temperature | −20°C to +85°C (with optional thermal management) |
| Ingress Protection | IP65 |
| Calibration | Pre-Loaded Application-Specific Models |
| Brand | KPM Sensortech |
|---|---|
| Origin | USA |
| Model | PMT-330 |
| Type | Capacitance-Based RF Moisture Analyzer |
| Application | Non-Destructive In-Line and Spot Measurement in Lumber, Plywood, Particleboard, Corrugated Paperboard, and Gypsum Wallboard |
| Compliance | Meets ASTM D4442 (Wood), ISO 8781-3 (Paper & Board), and ASTM C117 (Gypsum) moisture test method principles |
| Brand | KPM Sensortech |
|---|---|
| Origin | USA |
| Model | ST-3300 |
| Operating Temperature Range | 0–60°C (32–140°F) standard |
| Measurement Principle | Patented digital closed-loop radiofrequency dielectric sensing |
| Output Interface | 4–20 mA, RS-485, Ethernet (Modbus TCP), optional Profibus/FOUNDATION Fieldbus |
| Compliance | Designed for industrial environments per IEC 61000-6-2/6-4, NEMA 4X/IP66 enclosure rating, ATEX/IECEx Zone 2 optional |