Micro Emission
Filter
Showing all 4 results
| Brand | Micro Emission |
|---|---|
| Origin | Japan |
| Model | MH-5000 |
| Instrument Type | Portable |
| Detection Principle | Liquid Electrode Capillary Plasma Optical Emission Spectrometry (LECP-OES) |
| Target Analytes | Multi-element (≥40 metals, including As, Cd, Cr, Cu, Fe, Pb, Mn, Ni, Zn, etc.) |
| Analysis Time | ≤5 s per sample |
| Sample Volume | 40 µL |
| Power Supply | 6 × AA batteries or AC adapter |
| Weight | 1.4 kg (including battery) |
| Dimensions | 20 × 10 × 11 cm |
| Gas Requirement | None |
| Cooling | Air-cooled, no water circulation |
| Exhaust | No dedicated fume hood required |
| Compliance | Designed for field-deployable environmental testing in accordance with EPA Method 200.7–derived protocols and ISO 17294-2:2016 principles |
| Brand | Micro Emission |
|---|---|
| Origin | Japan |
| Model | MH-5000 |
| Instrument Type | Full-Spectrum Direct-Reading OES |
| Wavelength Range | 200–860 nm |
| Weight | 1.4 kg (including battery) |
| Power Supply | 6 AA batteries or AC adapter |
| Sample Volume | 40 µL |
| Element Coverage | >40 elements (including Na, Mg, Al, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Sr, Cd, Ba, Pb, and rare earths) |
| Brand | Micro Emission |
|---|---|
| Origin | Japan |
| Model | MH-6000A |
| Instrument Type | Full-Spectrum Direct-Reading OES |
| Wavelength Range | 200–860 nm |
| Weight | 4.4 kg |
| Dimensions (L×W×H) | 31 × 16 × 20 cm |
| Power Consumption | 100 W |
| Gas Requirement | None |
| Cooling | Air-Cooled, No Water Circulation |
| Sample Introduction | Peristaltic Pump |
| Detector Configuration | Dual-Detector Array |
| Sample Form | Aqueous Liquids (with Optional Sapphire Flow Cell) |
| Brand | Micro Emission |
|---|---|
| Origin | Japan |
| Model | MH-6000A |
| Instrument Type | Portable |
| Detection Principle | Optical Emission Spectrometry (OES) with Liquid Electrode Capillary Plasma (LECP) Excitation |
| Target Analytes | Multi-element (≥40 metals, including As, Cd, Cr, Cu, Fe, Pb, Zn, Ni, Mn, Al, Si, etc.) |
| Analysis Time | ≤5 s per sample |
| Detection Limit | Sub-ppm to ppm range |
| Power Requirement | 100 W AC/DC |
| Weight | 4.4 kg |
| Dimensions | 31 × 16 × 20 cm |
| Gas-Free Operation | Yes |
| Cooling System | None required |
| Exhaust Ventilation | Not required |
| Sample Introduction | Peristaltic pump |
| Detector Configuration | Dual-detector array (UV–Vis–NIR extended range) |
| Optional Accessory | Sapphire flow cell (for alkaline and high-silica matrices) |