Novocontrol Technologies
Filter
Showing all 5 results
| Brand | Novocontrol Technologies |
|---|---|
| Origin | Germany |
| Model | Alpha-A |
| Frequency Range | 3 µHz – 40 MHz (up to 3 GHz with Keysight E4991B RF Impedance Analyzer) |
| Temperature Range | −160 °C to +1600 °C |
| Impedance Range | 10 mΩ to 100 TΩ |
| Measurement Voltage | 10⁻⁶ V to 3 V RMS |
| DC Bias Voltage | ±40 V |
| Sample Compatibility | Solids, thin films, liquids, powders, ceramics, polymers, electrolytes |
| Software | Novocontrol WinDETA v5.x with real-time multi-parameter acquisition (≥30 parameters), audit trail, GLP-compliant reporting |
| Brand | Novocontrol Technologies |
|---|---|
| Origin | Germany |
| Model | Alpha-A |
| Frequency Range | 3 µHz – 40 MHz (up to 3 GHz with Keysight E4991B RF Impedance Analyzer) |
| Temperature Range | −160 °C to +1600 °C |
| Impedance Range | 10 mΩ to 100 TΩ |
| AC Voltage Range | 10⁻⁶ V to 3 V RMS |
| DC Bias Voltage | ±40 V |
| Compliance | ASTM D150, ISO 257-1/2, IEC 60250, USP <1058>, FDA 21 CFR Part 11 (software-enabled audit trail) |
| Brand | Novocontrol Technologies |
|---|---|
| Origin | Germany |
| Manufacturer | novocontrol GmbH |
| Frequency Range | 3 µHz – 40 MHz (up to 3 GHz with Keysight E4991B Impedance Analyzer) |
| Temperature Range | −160 °C to +1600 °C |
| Impedance Range | 10 mΩ to 100 TΩ |
| Measurement Voltage | 10⁻⁶ V to 3 V RMS |
| DC Bias Voltage | ±40 V |
| Software | Novocontrol WinDETA v5.x with real-time multi-parameter acquisition (≥30 parameters) |
| Compliance | Fully compatible with ASTM D150, ISO 257-1/2, IEC 60250, and supports GLP/GMP audit trails per FDA 21 CFR Part 11 |
| Brand | Novocontrol Technologies |
|---|---|
| Origin | Germany |
| Model | MKW4200 |
| Frequency Range | 3 µHz – 40 MHz (up to 3 GHz with Keysight E4991B) |
| Temperature Range | −160 °C to +1600 °C |
| Impedance Range | 10 mΩ to 100 TΩ |
| AC Voltage Range | 10⁻⁶ V to 3 V |
| DC Bias Voltage | ±40 V |
| Sample Compatibility | Solids, thin films, liquids, powders, pastes |
| Compliance | ASTM D150, ISO 257-3, IEC 60250, USP <1058>, FDA 21 CFR Part 11 (software audit trail enabled) |
| Brand | Novocontrol Technologies |
|---|---|
| Origin | Germany |
| Model | NEISYS |
| Frequency Range | 3 µHz – 100 MHz |
| Sampling Rate | 10⁷ points/sec |
| Impedance Range | 10⁻⁴ Ω – 1 TΩ |
| Loss Factor Accuracy | ±1×10⁻⁴ |
| Architecture | Four-Electrode, Separated Current/Voltage Signal Paths |
| Thermal Expansion Option | Yes |
| Operating Modes | Frequency-Domain (EIS, Dielectric, Conductivity, Loss Tangent) & Time-Domain (CV, LSV, SWV, CA, CP, Galvanostatic/Potentiostatic Cycling, Battery Charge/Discharge, Capacitor Charging/Discharging) |
| Compliance Support | ASTM D257, ISO 60270, IEC 60601-2-60 (for dielectric safety), GLP/GMP-ready data audit trail |