Other Electrochemical Instruments
Filter
Showing 1–30 of 103 results
| Brand | ALS |
|---|---|
| Origin | Japan |
| Model | GC3mm / 013490 |
| Disk Diameter | 3 mm |
| Insulator Diameter | 12 mm |
| Total Length | 25 mm |
| Electrode Material | Interchangeable (e.g., Pt, Au, GC, Ni, Cu, Ag, Glassy Carbon) |
| Brand | ALS (Japan) |
|---|---|
| Model | RRDE-3A |
| Rotation Speed Range | 100–8,000 rpm |
| Gas Purge Control | Programmable ON/OFF timer (up to 9999 s) |
| Display | LCD showing speed, purge duration, model ID, serial number, cumulative motor runtime, maintenance alerts |
| Electrode Compatibility | Standard 7 mm OD coaxial ring-disk electrodes |
| Motor Type | DC servo motor with PI closed-loop speed control |
| Coupling | Insulated elastomeric coupling + PTFE-insulated dual-shaft assembly |
| Cell Interface | Open-cell design with universal potentiostat pin connections |
| Remote Control | TTL/RS-232 interface compatible with ALS Model 2325 bipotentiostat and third-party electrochemical workstations |
| Operating Modes | Manual or computer-controlled (rotation ON/OFF, speed setpoint, purge gas ON/OFF) |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | 300W PEM Fuel Cell Stack |
| Rated Power | 300 W (DC) |
| Output Voltage Range | 15–30 V DC |
| Nominal Current | 18 A |
| Operating Temperature | 5–55 °C |
| Electrical Efficiency | 45% @ 300 W |
| Fuel | 99.9% H₂ and ambient air |
| H₂ Consumption | 4.5 L/min (STP) |
| H₂ Inlet Pressure | 250–350 mbar(g) |
| Number of Cells | 30 |
| Cooling | Liquid-cooled |
| Interface | 1/4" internal thread (ISO 7/1) |
| Dimensions | 175 × 85 × 95 mm |
| Weight | 1.7 kg |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | Electrum 1000W |
| Output Power | 1000 W |
| Output Voltage Options | 24 V DC (20.5–27.5 V), 48 V DC (40.5–55 V), or 110–230 V AC |
| Rated Current | 40 A (24 V), 20 A (48 V), 4.5 A (230 V AC) |
| Operating Temperature | 5–45 °C |
| Hydrogen Consumption | 11 SL/min |
| Hydrogen Inlet Pressure | 2–20 bar |
| Dimensions (W×H×D) | 482 × 244 × 500 mm |
| Net Weight | 15 kg (24 V), 17 kg (48 V), 20 kg (AC inverter variant) |
| Response Time | Instantaneous |
| Enclosure | IP-rated, rack-mountable 19″ chassis |
| Compliance | CE, UL/cUL listed (per IEC 62282-2), EN 60950-1, ISO 14687-2 (hydrogen quality interface) |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | qCF RFB |
| Weight (Fixture) | 10 kg |
| Dimensions (Fixture) | 300 mm × 300 mm × 230 mm |
| Active Area | 40 cm² (52 mm × 77 mm) |
| Electrode Travel Range | ±6 mm per side |
| Compression Adjustment | Manual, center-supported lever mechanism |
| Force Transmission | Direct clamping via quick-link principle |
| Temperature Control | External recirculating chiller/heater required |
| Operating Temperature Range | −6 °C to +60 °C |
| Fluid Contact Materials | Graphite and chemically resistant plastics only |
| Current Collection | Stainless steel / gold-plated terminals |
| Electrical Interface | 6 mm multi-point binding posts |
| Distance Measurement | Digital caliper with 0.01 mm resolution |
| Tubing Material | PVC |
| Compliance | Designed for ASTM E2981, IEC 62933-2-1, and ISO 14687-compliant RFB component validation |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | QCF-125 |
| Active Area per Cell | 25 cm² |
| Max. Number of Cells | 5 |
| Temperature Range | up to 140 °C |
| Contact Pressure | up to 6.28 kN (2.5 N/mm², equivalent to 8 bar) |
| Gas Inlet/Outlet Port Diameter | Ø 8 mm |
| Pneumatic Control Port Diameter | Ø 4 mm |
| Electrical Interface | 1 mm sensor wire socket, 8 mm load current terminal |
| Stack Thickness Adjustment Range | up to 0.9 mm per MEA |
| Dimensions (L×W×H) | 465 × 175 × 242 mm |
| Net Weight | 13.5 kg |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | QCF12 |
| Active Area | 12 cm² |
| Piston Diameter | Ø100 mm |
| Mass | 6 kg |
| Max Contact Pressure | 2.5 N/mm² |
| Operating Temperature Range | −20 to 150 °C |
| Coolant–Cathode Outlet ΔT | ≤1 K at 5 A/cm² |
| Cooling/Heating Medium | External Liquid Circulator (not included) |
| Gas Inlet Fittings | Ø4 mm (fuel/air supply via Ø6 mm ports) |
| Electrical & Thermal Interface | Stainless Steel with Gold-Plated Contacts and FKM Seals |
| Actuation | Motorized 5/2 Solenoid Valve |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | QCF50 |
| Active Area | 50 cm² |
| Pressure Control | Pneumatically Actuated, Continuously Adjustable |
| Temperature Compatibility | –50 °C to +250 °C (with optional TCU) |
| Compliance | Designed for ISO/IEC 17025-compliant lab environments |
| Customization | Available for PEMFC, AEMFC, electrolysis, and metal–air cells |
| Accessories | CMD compression monitor, CSL current distribution scanner, DHRE_Pt reference electrode, HSE humidity sensors, flow-field customization, liquid-cooled/heated manifolds |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | SuSy300 |
| Output Power | 300 W (nominal) |
| DC Voltage Range | 16–21 V |
| Rated Current | 18 A |
| System Efficiency | 45% @ 300 W |
| Fuel | 99.9% H₂ + ambient air |
| H₂ Inlet Pressure | 2–20 bar |
| Startup Time | <3 s |
| Safety Monitoring | Integrated H₂ pressure & temperature sensors |
| Gas Port | 1/8" internal thread |
| Control Interface | SUB-D9 connector, RS-232 protocol |
| Dimensions | 244 × 155 × 180 mm |
| Weight | 3.9 kg |
| Brand | Baltic FuelCells |
|---|---|
| Origin | Germany |
| Model | SuSy500 |
| Rated Power | 500 W (DC) |
| Output Voltage Range | 24–32 V DC |
| Nominal Current | 18 A |
| System Efficiency | 45% at 500 W |
| Fuel | 99.9% H₂ + Ambient Air |
| H₂ Inlet Pressure | 2–20 bar |
| Startup Time | <3 s |
| Safety Sensors | Integrated H₂ pressure & temperature monitoring |
| Gas Interface | 1/8″ NPT internal thread |
| Control Interface | SUB-D9 connector, RS-232 protocol |
| Dimensions | 244 × 155 × 180 mm |
| Weight | 3.9 kg |
| Brand | NARISHIGE |
|---|---|
| Origin | Japan |
| Model | BE-8 |
| Travel Range (Coarse X-axis) | 40 mm |
| Mounting Interface | 10 mm diameter rod |
| Dimensions (W×D×H) | 140 × 25 × 95 mm |
| Weight | 210 g |
| Type | Single-Axis Coarse Micromanipulator |
| Application | Stereotactic Auxiliary Positioning |
| Brand | BQC |
|---|---|
| Origin | Spain |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | BRS |
| Pricing | Available Upon Request |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | CAS3070 |
| pH Range | 2.0–12.0 |
| pH Resolution | 0.01 |
| pH Accuracy | ±0.1 |
| Dissolved Oxygen Range | 0–30.0 ppm |
| DO Resolution | 0.1 ppm |
| DO Accuracy | ±1 ppm |
| Conductivity Range | 0–69.9 mS/cm |
| Conductivity Resolution | 0.1 µS/cm |
| Conductivity Accuracy | ±2% FS |
| Salinity Range | 0–42.0 ppt |
| Salinity Resolution | 0.1 ppt |
| Salinity Accuracy | ±1% FS |
| Temperature Range | 0–60.0 °C |
| Temp Resolution | 0.1 °C |
| Temp Accuracy | ±0.5 °C |
| Operating Temperature | 0–50 °C |
| Protection Rating | IP67 |
| Power Supply | 6 × AAA batteries |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | HandyLab 600 |
| pH Range | -0.000–14.000, ±0.004 pH |
| mV Range | -1200.0–+1200.0 mV, ±0.2 mV |
| Temperature Range | -5.0–+105.0 °C, ±0.2 °C |
| Data Storage | 500 manual + 5,000 automatic datasets |
| Calibration | 1–5 points, with 22 built-in standard buffer sets |
| Display | Backlit monochrome LCD |
| Interface | USB-B (Mini) |
| Ingress Protection | IP67 |
| Power | Rechargeable battery operation |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | HandyLab 680 |
| IP Rating | IP67 |
| Electrode Interface | IDS Digital Signal |
| Channels | Dual-channel (simultaneous measurement) |
| pH Range & Accuracy | –0.000 to 14.000, ±0.004 pH |
| mV Range & Accuracy | –1200.0 to +1200.0 mV, ±0.2 mV |
| Conductivity Range & Accuracy | 0.00 to 2000 mS/cm, ±0.5% of mean value |
| Resistivity Range & Accuracy | 0.00 Ω·cm to 100 MΩ·cm, ±0.5% of mean value |
| Salinity Range & Accuracy | 0.0 to 70.0 ppt (IOT), ±0.5% of mean value |
| TDS Range & Accuracy | 0 to 1999 mg/L or 0 to 199.9 g/L, ±0.5% of mean value |
| Temperature Range & Accuracy | –5.0 to +105.0 °C, ±0.2 °C |
| Dissolved Oxygen (DO) Range & Accuracy | 0.00 to 20.00 mg/L, ±0.5% of reading |
| Oxygen Saturation Range & Accuracy | 0.0 to 200.0%, ±0.5% of reading |
| Oxygen Partial Pressure Range & Accuracy | 0 to 400 hPa, ±0.5% of reading |
| Calibration | 1–5 point, 22 preconfigured buffer sets |
| CMC (Continuous Measurement Control) | Yes |
| QSC (Quality Sensor Check) | Yes |
| Data Storage | 500 manual + 10,000 automatic datasets |
| User Management | Role-based access control |
| Connectivity | USB-B (Mini-B) and USB-A ports |
| Power | Rechargeable battery (operational without external power) |
| Display | Backlit high-contrast LCD |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | Lab 875 / Lab 875P |
| Measurement Parameters | pH, mV, Dissolved Oxygen (DO) Saturation & Concentration & Partial Pressure, Conductivity, Resistivity, Salinity, TDS, Temperature |
| Electrode Compatibility | IDS (Intelligent Digital Sensor) electrodes |
| pH Calibration Points | 1–5 |
| DO Calibration | 1-point (air saturation or zero) |
| Conductivity Calibration | 1-point |
| Calibration Records Stored | ≤10 sets |
| Calibration Timer | 1–999 days |
| Data Storage | 500 manual + 4,500 automatic entries |
| Temperature Compensation | Automatic for all parameters except ORP |
| GLP/AQS Compliance | Yes |
| Printer Support | External printer (Lab 875P includes integrated thermal printer) |
| Communication Interface | Mini USB-B |
| Power Supply | 4 × 1.5 V AA batteries or AC adapter |
| Additional Features | CMC (Continuous Measurement Control), QSC (Quick Sensor Check) |
| Software Export Format | CSV |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | ProLab 2500 |
| Measurement Channels | 3 |
| Display | Color Graphic LCD |
| Electrode Interface | IDS (Intelligent Digital Sensor) compatible |
| pH Calibration Points | 1–5 |
| ISE Calibration Points | 2–7 (with adapter) |
| DO & Conductivity Calibration | 1-point each |
| Temperature Compensation | Automatic for all parameters except ORP |
| Data Storage | 500 manual + 10,000 automatic entries |
| Connectivity | USB-A, Mini USB-B |
| Compliance | GLP/AQS compliant |
| Power Supply | Mains-powered (no battery) |
| Keyboard | Antimicrobial membrane keypad |
| Firmware | Field-upgradable |
| Printer Support | Yes (external) |
| Additional Features | CMC (Continuous Measurement Control), QSC (Quality Sensor Check), Zinc die-cast housing |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | SO₂ Titration Analyzer |
| Measurement Range | 1–300 mg/L |
| Repeatability | ±6 mg/L (Total SO₂), ±2 mg/L (Free SO₂) |
| Analysis Time (excl. distillation) | 4–5 min (Total SO₂), 2–3 min (Free SO₂) |
| Standard Configuration | Main unit, glass reaction vessel, drying valve, three 300 mL Erlenmeyer flasks, two magnetic stir bars, ten titration tips, reagent kit, and operator manual |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | VAM 320 / VAM 320-EX |
| Measurement Range | 0 to 2000 mbar |
| Max. Overpressure | 3200 mbar |
| Resolution | 1 mbar (0.1 kPa, 0.01 psi, 1 torr) |
| Accuracy | ±0.4 % of full scale or ±1 digit, whichever is greater |
| Sampling Interval | Adjustable from 0.25 s to 15 s |
| Sensor Interface | LEMO 0, 4-pole |
| Power Supply | Integrated rechargeable lithium battery |
| Operating Temperature | 0 °C to +50 °C (max. 85 % RH) |
| Storage Temperature | −5 °C to +50 °C |
| Dimensions (main unit) | 170 × 45 × 24 mm (polyamide 6.6) |
| Sensor Dimensions | 30 × 40 mm (PEEK) |
| Protection Rating | IP50 (unit only, without sensor) |
| Weight | approx. 150 g |
| Calibration | Factory two-point calibration with certificate |
| ATEX Certification | BVS 03 ATEX E 068 (VAM 320-EX models only) |
| Brand | DC-Energies |
|---|---|
| Model | DC 880 |
| Origin | Wuhan, China |
| Category | Electrochemical CO₂ Reduction (CO₂RR) Flow Cell Test System |
| Gas Flow Control | Anode-side CO₂/N₂/H₂ and cathode-side liquid/gas flow management |
| Backpressure Regulation | Manual dual-chamber (anode/cathode) pressure control up to 10 bar |
| Temperature Control | Heated/insulated tubing & CO₂RR flow cell fixture (ambient to 80 °C, ±0.5 °C stability) |
| Pressure Monitoring | Integrated digital pressure transducers (0–10 bar, 0.01 bar resolution) |
| Compatibility | Requires external potentiostat/galvanostat for Faradaic efficiency, long-term stability, and product quantification assays |
| Compliance | Designed for ASTM D7467-22 (electrochemical gas-phase reaction systems), ISO 17025-compliant test environment support |
| Brand | DC-Energies |
|---|---|
| Model | DC ID-4000 |
| Dispersion Capacity | ≤4000 µL |
| Ultrasonic Frequency | 30 kHz |
| Ultrasonic Duration | 0–1000 s |
| Ultrasonic Interval | 10–100 s |
| Shear Speed | 0–8000 rpm |
| Shear Duration | 0–1000 s |
| Shear Interval | 10–100 s |
| Cycles | 1–100 |
| Vacuum Level | −0.1 MPa |
| Power Consumption | <500 W |
| Control Interface | 7-inch capacitive touchscreen |
| Brand | dc-energies |
|---|---|
| Model | DC IS-200 |
| Maximum Coating Area | 190 × 190 mm² |
| XY Travel Range | 190 × 190 mm |
| Z-Axis Manual Adjustment Range | 50 mm |
| Pneumatic Atomization Nozzle | High-Precision Imported |
| Heating Capability | >100 °C with Vacuum-Assisted Substrate Holding |
| Control Interface | Touchscreen Programmable Controller |
| Applicable Processes | GDE, CCM, Thermal Transfer Coating |
| Liquid Utilization Efficiency | >95% |
| Compliance | Designed for R&D and Pilot-Scale Electrode Fabrication under GLP-Informed Lab Practices |
| Brand | dc-energies |
|---|---|
| Model | DC TP-100 |
| Max. Hydraulic Force | 10 t (≈39.2 MPa on 5×5 cm² area) |
| Temperature Range | 50–350 °C (dual-zone heating) |
| Pressure Control | Digital Display, Four-Column Uniform Load Architecture |
| Compliance | Designed for PEM Fuel Cell MEA Fabrication per ASTM D7263, ISO 14687, and DOE Hydrogen Program Best Practices |
| Brand | DC-Energies |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Model | DSR-M |
| Rotation Speed Range | 0–10,000 rpm |
| Motor Power | 20 W |
| Disk Electrode Material | Glassy Carbon |
| Ring Electrode Material | Platinum |
| Disk Diameter | 5.61 mm |
| Ring Inner Diameter | 6.25 mm |
| Ring Outer Diameter | 7.92 mm |
| Ring-Disk Gap | ≤320 µm |
| Collection Efficiency | 37% |
| Disk-Ring Dimensional Tolerance | ±0.01 mm |
| Electrode Housing Material | PTFE |
| Rotating Shaft Length | 170 mm |
| Shaft Outer Diameter | 15 mm |
| Base Material | Polypropylene |
| Signal Interface | Analog voltage input/output (0–10 V), TTL-compatible speed control |
| Compliance | Designed for inert-atmosphere operation (glovebox-compatible), explosion-resistant enclosure |
| Brand | dc-energies |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Model | DSR-M (RRDE) |
| Rotation Speed Range | 0–10,000 rpm |
| Motor Power | 20 W |
| Disk Electrode Material | Glassy Carbon |
| Ring Electrode Material | Platinum |
| Disk Diameter | 5.61 mm |
| Ring Inner Diameter | 6.25 mm |
| Ring Outer Diameter | 7.92 mm |
| Disk-Ring Gap | ≤320 µm |
| Collection Efficiency | 37% |
| Disk-Ring Dimensional Tolerance | ±0.01 mm |
| Electrode Body Material | PTFE-coated |
| Rotating Shaft Length | 170 mm |
| Shaft Outer Diameter | 15 mm |
| Control Interface | Analog voltage input/output (0–10 V), TTL-compatible |
| Operating Temperature | Ambient |
| Compliance | Designed for inert-atmosphere glovebox integration |
| Brand | Lacerta |
|---|---|
| Origin | United Kingdom |
| Model | DS6000 |
| Type | Dielectric Relaxation Spectrometer |
| Cooling Range | Down to cryogenic temperatures (e.g., −160 °C with optional liquid nitrogen cryostat) |
| Electrode Configuration | Liquid-compatible cup electrodes |
| Humidity Control | Integrated humidity chamber option for hygroscopic sample studies |
| Software Interface | Windows-based, wizard-driven acquisition and analysis suite |
| Compliance | Designed to support ASTM D150, ISO 257-1/2, IEC 60250, and GLP-compliant data traceability (21 CFR Part 11 ready) |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Product Origin | Domestic (China) |
| Model | DDO10 |
| Pricing | Upon Request |
| Display | 3.5-inch TFT color LCD |
| UI | Modern graphical interface with intuitive navigation |
| Operating System | Embedded intelligent firmware with timer measurement, parameter configuration, and data hold functions |
| Data Storage | Up to 3,000 measurement records |
| Calibration | Electrode calibration and standard solution calibration supported |
| Power Supply | Rechargeable lithium-ion battery (pre-installed DH10-LI01) |
| Charging Interface | USB Type-C (compliant with latest EU regulatory requirements) |
| Ingress Protection | IP57 (dust-protected |
| DO Measurement Range | 0.00–20.00 mg/L |
| DO Accuracy | ±0.30 mg/L |
| DO Saturation Range | 0.0–200.0 % |
| Atmospheric Pressure Compensation | Automatic, 0–200.0 kPa |
| Temperature Compensation | Automatic, 0.0–50.0 °C (32.0–122.0 °F) |
| Salinity Compensation | Manual, 0–45 ppt |
| Temperature Measurement Range | −10.0–135.0 °C (14.0–275.0 °F) |
| Temperature Accuracy | ±0.2 °C |
| Standard Accessories | DDO01-2M-H polarographic DO electrode (2 m cable, integrated temperature sensor), DDOS-01 electrolyte solution (30 mL), DDOSC membrane caps (3 pcs), carrying case (33 × 27.2 × 8.2 cm) |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Product Origin | Domestic (China) |
| Model | DDOPRO10 |
| Price | Upon Request |
| Display | 3.5-inch TFT color LCD |
| Measurement Principle | Fluorescence quenching (optical, non-consumptive) |
| DO Range | 0.00–20.00 mg/L |
| DO Accuracy | ±0.20 mg/L |
| DO Saturation Range | 0.0–200.0 % |
| Atmospheric Pressure Compensation | Automatic, 0–200.0 kPa |
| Temperature Compensation | Automatic, 0.0–50.0 °C (32.0–122.0 °F) |
| Salinity Compensation | Manual, 0–45 ppt |
| Temperature Range | −10.0–135.0 °C (14.0–275.0 °F) |
| Temp Accuracy | ±0.2 °C |
| Response Time | <15 s |
| Electrode Housing | POM (polyoxymethylene) |
| Protection Rating | IP57 |
| Power Supply | Built-in rechargeable Li-ion battery (DH10-LI01) |
| Charging Interface | USB Type-C |
| Standard Kit Includes | DDOPRO10 meter, DODO01-3M optical DO probe (3 m cable), carrying case (33 × 27.2 × 8.2 cm), charging cable, user manual |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Manufacturer | DLAB Scientific Instruments Co., Ltd. |
| Model | DPH1 & DPH1+ |
| Compliance | IP67-rated enclosure |
| Calibration Standards | CH, USA, and NIST traceable buffer solutions |
| Power | Replaceable AAA batteries with low-voltage indicator |
| Auto-off & backlight timeout | User-configurable |
| Connectivity | Bluetooth 5.0 to companion mobile app (iOS/Android) |
| Package Includes | pH 4.01/7.00/10.01 calibration kits, carrying lanyard, protective cap, user manual |
| Brand | DLAB |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | Portable Multi-Parameter Analyzer |
| Pricing | Upon Request |
| Display | 3.5-inch TFT color LCD |
| Data Storage Capacity | Up to 3,000 measurement records |
| Power Supply | Rechargeable Li-ion battery with low-power management and power-loss protection |
| Charging Interface | USB Type-C (compliant with latest EU standards) |
| Ingress Protection Rating | IP57 |
| Conductivity Module | Supports electrode calibration and standard solution calibration |
| Software Features | Sample ID tagging, user role-based access control, instrument usage logging, audit-trail-enabled operation recording, data export & printing |