Other Brands
Filter
Showing 301–330 of 646 results
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 12,500 (FOB) |
| Internal Dimensions (D×W×H) | 60×90×50 cm |
| External Dimensions (D×W×H) | 106×155×121 cm |
| Temperature Range | RT+10°C to 55°C |
| Humidity | ≥93% RH |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Fog Deposition Rate | 1–2 mL/80 cm²/h |
| Spray Mode | Continuous or Cyclic (Selectable) |
| Sample Rack | Dual-layer, Adjustable Tilt (15°–30°) |
| Compressor Requirement | V-0.013/12.5 (User-supplied) |
| Discharge Pressure | 1.25 MPa |
| Air Flow | 0.13 m³/min |
| Heating System | Water-jacketed with Titanium-sheathed NiCr Far-infrared Heater |
| Chamber Material | PVC Plastic Board (UV-stabilized, acid/salt-resistant) |
| Lid Material | Transparent Impact-resistant Polycarbonate |
| Sealing | Water-sealed Lid-to-Body Interface |
| Compliance | GB/T 2423.17, GB/T 10587, GJB 150.11A, DIN 50021, ISO 9227 (Neutral Salt Spray NSS), ASTM B117 |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Chamber Internal Dimensions (W×D×H) | 900 × 600 × 500 mm |
| External Dimensions (W×D×H) | 1420 × 780 × 1280 mm |
| Salt Spray Modes | NSS (ASTM B117), ACSS, CASS (ISO 9227) |
| Test Chamber Temp. Range | 35 ±1 °C (NSS/ACSS), 50 ±1 °C (CASS) |
| Saturated Air Tank Temp. | 47 ±1 °C (NSS/ACSS), 63 ±1 °C (CASS) |
| Air Supply Pressure | 1 kgf/cm² (two-stage regulation) |
| Safety Systems | Low-water cutoff, overtemperature shutdown, low-salt solution alarm, visual/audible warning indicators |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | +10°C to 60°C ±1°C |
| Temperature Uniformity | ±1.0°C |
| Salt Solution Concentration | 5.0 ±0.5% (w/w) NaCl |
| Salt Fog Deposition Rate | 1–2 mL / 80 cm²·h |
| Humidity Range | 30–98% RH (adjustable) |
| Internal Chamber Dimensions (W×D×H) | 900 × 600 × 500 mm |
| External Dimensions (W×D×H) | 1500 × 1300 × 1000 mm |
| Salt Reservoir Capacity | 40 L (PVC-lined) |
| Programmable Steps | 1200 segments across 120 program groups |
| Segment Duration | 0–99 h 59 min |
| PID Control | 9 independent sets with auto-tuning |
| Compliance | GB/T 2423.17–1993, GB/T 5170.8–1996, GB/T 10587–2006 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Chamber Internal Dimensions (W×D×H) | 900 × 600 × 500 mm |
| External Dimensions (W×D×H) | 1420 × 780 × 1280 mm |
| NSS Test Temperature | 35 ± 1 °C |
| SATURATED AIR BUCKET TEMP (NSS) | 47 ± 1 °C |
| CASS Test Temperature | 50 ± 1 °C |
| SATURATED AIR BUCKET TEMP (CASS) | 63 ± 1 °C |
| Air Supply Pressure | 1 kg/cm² (two-stage adjustable) |
| Safety Features | Low-water-level cutoff, Overtemperature cutoff, Visual/audible alarm system, Low-salt-solution warning indicator |
| Note | Compressed air source and deionized water supply must be provided by user |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 100–132 °C |
| Humidity Range | 75–100 % RH (Saturated Steam) |
| Pressure Range | 0–4 kg/cm² above Atmospheric Pressure |
| Internal Chamber Dimensions | Φ25×40 cm (OK-HAST-25) |
| Max Continuous Operation Time | 400 h |
| Safety Features | Dual-stage pressure relief, dual overheat protection, auto water replenishment, cold air purge (pre- and mid-cycle), steam generator isolation chamber, pressure-rated tank (2.65 MPa @ 140 °C), mechanical + electronic pressure safety cutoff |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Model | OK-HAST-25 |
| Price | USD 14,000 (approx.) |
| Internal Dimensions (Ø × D) | 250 mm × 300 mm |
| External Dimensions (W × H × D) | 500 mm × 500 mm × 700 mm |
| Operating Temperature Range | 105 °C to 135 °C (143 °C optional) |
| Relative Humidity Range | 70–100 % RH |
| Pressure Range | 0.0–2.0 kg/cm² above ambient (3.0 kg/cm² optional) |
| Steam Generation | Saturated/unsaturated steam via electrically heated water reservoir |
| Circulation Method | Forced convection steam-air mixture |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Safety Systems | Dual overheat protection, mechanical safety interlock, pressure relief valve, low-water cutoff, auto-drain for non-saturated vapor purge |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Internal Dimensions (W×H×D) | 40×35×30 cm to 70×60×60 cm |
| External Dimensions (W×H×D) | 145×180×140 cm to 190×170×270 cm |
| High-Temperature Zone Range | RT to +200 °C |
| Low-Temperature Zone Range | RT to −70 °C |
| Test Zone Temperature Range | +60 °C to +150 °C (hot shock) |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C |
| Recovery Time | <5 min |
| Preheating Time (RT→150 °C) | ~30 min |
| Precooling Time (RT→−70 °C) | ~85 min |
| Refrigeration System | Dual-stage cascade refrigeration with semi-hermetic compressors (Germany-sourced), R404A/R23 refrigerants |
| Insulation | High-density fire-retardant PU foam |
| Interior Material | Mirror-finish SUS304 stainless steel |
| Exterior Material | SUS304 stainless steel or powder-coated steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 2,600 (Reference Only) |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour |
| Adjustable Air Exchange Interval | 1 min – 99 h |
| Power Rating | 4.0–9.0 kW |
| Internal Dimensions (L×W×H, mm) | 450×450×500 to 800×1000×1000 |
| External Dimensions (L×W×H, mm) | 1100×830×1600 to 1450×1400×2100 |
| Turntable Diameter | Φ250–Φ700 mm |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93 (2005), UL 1581, GB, VDE, JIS, IEC |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,600 (Reference Only) |
| Temperature Range | RT +10°C to 200°C / 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour |
| Adjustable Air Exchange Interval | 1 min – 99 h |
| Internal Chamber Dimensions (L×W×H, mm) | 450×450×500 to 800×1000×1000 |
| Power Rating | 4.0–9.0 kW |
| Rotating Turntable Diameter | Φ250–Φ700 mm |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93 (2005), UL 1581, GB/T 2951, IEC 60811, VDE 0472, JIS C 3005 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,600 (Reference Only) |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour |
| Adjustable Air Exchange Interval | 1 min – 99 h |
| Power Consumption | 4.0–9.0 kW |
| Internal Dimensions (L×W×H, mm) | 450×450×500 to 800×1000×1000 |
| External Dimensions (L×W×H, mm) | 1100×830×1600 to 1450×1400×2100 |
| Rotating Turntable Diameter | Φ250–Φ700 mm |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-05, UL 1581, GB/T 2423.2, IEC 60068-2-2, JIS C 0040, VDE 0470 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,700 (Reference Only) |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour (measurable per JIS K 7212 at 80°C) |
| Air Exchange Timer | 1 min – 99 h adjustable |
| Power | 4.0–9.0 kW (model-dependent) |
| Internal Chamber Dimensions (W×D×H, mm) | 450×450×500 to 800×1000×1000 |
| Rotating Turntable Diameter | Φ250–Φ700 mm |
| Control System | LED Digital PID + SSR Microcomputer Controller |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93(2005), UL 1581, IEC 60811, GB/T 2951, JIS C 3005, VDE 0472 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,600 (Reference Only) |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour |
| Adjustable Air Exchange Interval | 1 min – 99 h |
| Internal Chamber Dimensions (L×W×H, mm) | 450×450×500 to 800×1000×1000 |
| Power Consumption | 4.0–9.0 kW |
| Controller | LED Digital PID Microprocessor with Timer (1–9999 min) |
| Turntable Diameter | Φ250–Φ700 mm |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93(2005), UL 1581, GB/T 2423.2, IEC 60068-2-2, JIS C 0040, VDE 0470 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | OK-HQ-90 |
| Temperature Range | RT+10°C to 200°C |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour |
| Adjustable Air Exchange Time | 1 min–99 h |
| Internal Chamber Dimensions (W×D×H) | 450×450×500 mm |
| External Dimensions (W×D×H) | 1100×830×1600 mm |
| Power Rating | 4.0 kW |
| Controller | LED Digital PID Microprocessor Controller (Set/Display Resolution: 0.1°C) |
| Timer Range | 1–9999 min |
| Rotating Turntable Diameter | Φ250 mm |
| Test Port | One Ø50 mm port on left side |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93 (2005), UL 1581, GB/T 2423.2, IEC 60068-2-2, JIS C 0068, VDE 0470 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | OK-HQ-90 |
| Power Rating | 4.0 kW |
| Temperature Range | RT+10°C to 200°C (optional 300°C) |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour |
| Adjustable Air Exchange Interval | 1 min – 99 h |
| Internal Chamber Dimensions (W×D×H) | 450 × 450 × 500 mm |
| External Dimensions (W×D×H) | 1100 × 830 × 1600 mm |
| Observation Window | Tempered Glass with LED Illumination |
| Test Port | Ø50 mm on Left Side |
| Turntable Diameter | Ø250 mm |
| Insulation | Ultra-Fine Glass Fiber Mat |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93 (2005), UL 1581, GB/T 2423.2, IEC 60068-2-2, JIS C 0068, VDE 0470 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 13,500 (FOB) |
| Models | OK-HSAT-25 (Φ25×40 cm), OK-HSAT-30 (Φ30×50 cm), OK-HSAT-40 (Φ40×60 cm), OK-HSAT-50 (Φ50×70 cm) |
| Temperature Range | 100–132 °C |
| Humidity | 100 % RH (saturated steam) |
| Pressure Range | 0–4 kg/cm² (gauge) |
| Max Operating Duration | 400 h continuous |
| Chamber Pressure Rating | 2.65 kg/cm² at 140 °C |
| Hydrostatic Test Pressure | 6 kg/cm² |
| Safety Protection | Dual-stage pressure control (electronic + mechanical), emergency manual vent button, water-level sensor interlock, cold-air purge (pre- and mid-cycle) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Model | OK-LY-500C |
| Price | ¥26,000 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Model | OK-LY-500C |
| Price | USD 3,650 (approx.) |
| Chamber Interior Dimensions | 800 × 800 × 800 mm |
| Spray Ring Radius | 375 mm |
| Nozzle Diameter | 0.4 mm |
| Nozzle Spacing | 50 mm |
| Oscillation Angles | ±45°, ±60°, ±90°, ±180° |
| Turntable Speed | 1 rpm (adjustable via inverter) |
| Water Pressure Control | Digital Flow Meter + High-Pressure German Pump |
| Filtration System | Dual-stage Stainless Steel Mesh + Sediment Filter |
| Viewing Window | Tempered Safety Glass |
| Compliance | MIL-STD-810G Method 506.6, IEC 60529 IPX3/IPX4, ISO 20653, GB/T 4208, GB/T 2423.38, GJB 150.8 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Model | OK-LY-500C |
| Price | USD 3,650 (approx.) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 16,500 (FOB) |
| Max Load Capacity | 2–300 kg |
| Table Size | 116×100 mm to 1050×1200 mm |
| Peak Acceleration Range | 150–30,000 m/s² (Half-Sine, Trapezoidal, Post-Peak Sawtooth Waveforms) |
| Pulse Duration | 0.2–30 ms |
| Control OS | Windows XP Embedded |
| Data Acquisition | Real-time FIR Digital Filtering, Auto-Gain Adjustment, Parameter Auto-Extraction (Peak Accel, Δv, Pulse Width) |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General distributor |
| Price | USD 14,000 (approx.) |
| Models | OK-S-50, OK-S-100, OK-S-200, OK-S-300, OK-S-500, OK-S-1000 |
| Table Dimensions (cm) | 50×50 to 120×120 |
| Maximum Load Capacity (kg) | 50 to 1000 |
| Acceleration Range (half-sine pulse) | 150–6000 m/s² |
| Pulse Duration (half-sine) | 0.8–30 ms |
| High-Acceleration Mode (for specimens <200×200 mm) | 5000–50000 m/s², 0.2–1 ms |
| Waveform Options | Half-sine, rear-peak sawtooth, trapezoidal |
| Data Acquisition | Single-channel acceleration measurement with storage, reporting, recall, and database management |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Platform Dimensions | 18 × 18 cm |
| Platform Mass | 25 kg |
| Platform Material | Aluminum Alloy |
| Maximum Acceleration | 1500 g |
| Maximum Stroke | 90 cm |
| Maximum Velocity Change Rate | 7.4 m/s (Half-Sine) |
| Minimum Shock Duration | 0.5 ms |
| Maximum Payload | 20 kg |
| Machine Weight | 1000 kg |
| Overall Dimensions | 110 × 50 × 270 cm |
| Power Supply | AC 380 V / 3-Phase / 15 A |
| Air Pressure Requirement | 6–8 kg/cm² |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Max Load Capacity | 50 kg |
| Impact Waveforms | Half-sine, Trapezoidal, Post-peak Sawtooth |
| Peak Acceleration Range | Half-sine: 150–6000 m/s² |
| Trapezoidal | 100–1500 m/s² |
| Post-peak Sawtooth | 100–1500 m/s² |
| Pulse Duration | Half-sine: 2–20 ms |
| Trapezoidal | 6–25 ms |
| Post-peak Sawtooth | 4–18 ms |
| Max Drop Height | 1500 mm |
| Secondary Impact Prevention | Pneumatic/Hydraulic/Friction Braking System |
| Table Surface Dimensions | 500 × 500 mm |
| Unit Weight | ~1800 kg |
| Overall Dimensions (L×W×H) | 1200 × 750 × 2750 mm |
| Power Consumption | 2.2 kVA |
| Supply Voltage | Three-phase AC 380 V ±10%, 50 Hz |
| Compliance | GB/T 2423.5, GB/T 2423.6, IEC 60068-2-27, IEC 60068-2-29, GJB 150, JJG 497 |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 12,500 (FOB) |
| Chamber Internal Dimensions (W×D×H) | 900 × 600 × 500 mm |
| External Dimensions (W×D×H) | 1420 × 780 × 1280 mm |
| NSS Test Temp | 35 ± 1 °C |
| SATURATION AIR TANK TEMP (NSS) | 47 ± 1 °C |
| CASS Test Temp | 50 ± 1 °C |
| SATURATION AIR TANK TEMP (CASS) | 63 ± 1 °C |
| Air Supply Pressure | 1 kg/cm² (two-stage regulation) |
| Safety | Low-water cutoff, overtemperature cutoff, low-brine-level alert, visual alarm indicators |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 11,200 (FOB) |
| Capacity Options | 4–40 m³ |
| Temperature Range | −65°C to +80°C (Model-Dependent) |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | <2°C |
| Temp. Fluctuation | ±0.5°C |
| Humidity Fluctuation | ±3% RH |
| Control Method | BTHC (Balanced Temperature & Humidity Control) |
| Construction | Modular Prefab Panels (Stainless Steel Interior + Heat-Resistant Sandwich Panels Exterior) |
| Insulation | Rigid Polyurethane Foam (≥150 mm Thickness) |
| Heating | Ni-Cr Alloy Wire Heaters |
| Humidification | Electric Steam Generator |
| Sensors | PT100 Platinum Resistance Thermometers + Dual Dry/Wet Bulb Hygrometry |
| Air Circulation | Centrifugal Blower System |
| Safety Systems | Over-Temp Cut-off, Pressure Equalization Door, Compressor Overheat/Overcurrent/High-Pressure Protection, Dry-Run Prevention, Low-Water Alarm |
| Cooling | Air-Cooled or Water-Cooled Scroll Compressor System |
| Power Supply | 3-Phase 380 VAC ±10%, 50/60 Hz |
| Standard Interfaces | Ø50 mm Cable Port, Observation Window, Interior LED Lighting |
| Optional | GLP-Compliant Data Logger (USB/RS485), Ethernet Communication Module, Sample Trolley Rack, Deep-Dry Dehumidification System (for <10% RH), RO Pure Water Generator |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D, cm) | 40×50×40 to 100×100×100 |
| External Dimensions (W×H×D, cm) | 100×165×100 to 180×200×180 |
| Temperature Range | -70 °C to +150 °C (configurable in four grades: A/B/C/D) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±2.5 %RH |
| Temperature Fluctuation | ±2 °C |
| Humidity Fluctuation | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | Heating ~4.0 °C/min |
| Refrigeration System | Hermetic low-noise dual-stage compressor with R404A/R23 eco-friendly refrigerant |
| Controller | Color TFT touchscreen with bilingual (English/Chinese) interface |
| Construction Material | SUS#304 stainless steel (inner & outer chamber) |
| Viewing Window | Multi-layer laminated tempered glass with conductive ITO film |
| Port | One 50 mm diameter test port on left side |
| Accessories | Two-tier SUS#304 shelves, four casters + four leveling feet |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Brand | Other Brands |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | OK-TH-100.3 |
| Price | USD 2,650 (FOB Guangdong) |
| Instrument Type | Benchtop |
| Condensation Method | Air-Cooled |
| Temperature Range | −50 °C to +150 °C |
| Humidity Range | 20–98 % RH |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±1 °C (high-temp), ±2 °C (low-temp) |
| Humidity Uniformity | ≤ ±3 % RH |
| Humidity Fluctuation | ±3 % RH |
| Heating Rate | 1.0–3.0 °C/min |
| Internal Chamber Dimensions (W×D×H) | 800 × 600 × 500 mm |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | OK-TH-225 |
| Service Quotation | USD 2,800 (excl. VAT & on-site travel fees) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Model | OK-TH-225 |
| Price | USD 3,100 (approx.) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Model | OK-TH-80 |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D) | 40×50×40 cm |
| Temperature Range Options | 0 to 150°C / −20 to 150°C / −40 to 150°C / −70 to 150°C |
| Humidity Range | 20–98% RH (optional 5–98% RH) |
| Temperature Uniformity | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Temperature Fluctuation | ±2°C |
| Humidity Fluctuation | +2–3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Refrigerant | R404A/R23 |
| Construction Material | SUS#304 Stainless Steel |
| Viewing Window | Multi-layer laminated tempered glass with conductive ITO film |
| Port | One 50 mm diameter test port (left side) |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |