Impact Testing Machine
Filter
Showing 1–30 of 188 results
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 29/53 |
| Pricing | Upon Request |
| Brand | Beiguang Jingyi / All Precision Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Pendulum Impact Tester |
| Impact Energy Options | 7.5 J, 15 J, 25 J, 50 J (custom higher energy available) |
| Impact Velocity | 3.8 m/s |
| Pendulum Center Distance (Support Span) | 395 mm |
| Pendulum Pre-lift Angle | 150° |
| Blade Radius | 0.8 ± 0.2 mm |
| Blade Angle | 75° |
| Blade Front Angle | 5° |
| Blade Back Angle | 10° |
| Test Specimen Support Span Options | 60 mm, 70 mm, 62 mm, 95 mm (configurable per standard) |
| Display | LCD Digital Readout with Photoelectric Encoder (2500-line resolution, ±0.018° angular accuracy) |
| Energy Calculation Method | Potential Energy Loss (E = Pd·(cosβ − cosα)) with Air Friction & Bearing Loss Correction |
| Power Supply | 220 V AC ±10%, 50 Hz, 0.2 A |
| Operating Temperature | 15–35 °C |
| Dimensions (W×D×H) | 930 × 520 × 950 mm |
| Net Weight | 80 kg |
| Compliance | GB/T 1043-1993, ISO 179-1:2010, GB/T 2611-2007, JB/T 8762-1998 |
| Origin | Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | LT-16 |
| Price | USD 3,100 (FOB Jilin) |
| Rebound Accuracy | ±1.5% rel. |
| Drop Height | 460 mm ±0.5% |
| Guide Tube ID | 40 mm ±4 mm |
| Steel Ball Diameter | 16.0 mm −0.15 mm |
| Steel Ball Mass | 16.7 g ±0.5 g |
| Rebound Range | 10–100% |
| Display | 4-digit LED digital readout |
| Specimen Dimensions | 100 × 100 × 50 mm (L×W×H) |
| Compliance | GB/T 6670–1986 (equivalent to ISO 8307:2021 for elastomeric materials) |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | CJE-30 |
| Maximum Output Voltage | 30 kV |
| Lightning Impulse Waveform | 1.2/50 µs |
| Switching Impulse Waveform | 250/2500 µs or damped oscillatory wave with front time 2000–3000 µs |
| Front Time (T₁) | 0.5–10 µs (T₁ = 1.67T) |
| Apparent Origin | 0.15–3 µs (0.3T₁) |
| Time to Half-Peak (T₂) | 10–100 µs |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DJF-300 |
| Price | Upon Request |
| Impact Energy | 150 J |
| Impact Velocity | 5.0–5.5 m/s |
| Load Cell Sampling Rate | 1.2 µs |
| Load Resolution | 1/4000 |
| Load Capacity | 20,000 N |
| Load Accuracy | ≤1% |
| Angular Displacement Resolution | 360°/10,000 |
| Notch Geometry Compliance | ISO 148-1:2016 (Charpy V-notch), ISO 83:1976 (Charpy U-notch), GB/T 229–2020 |
| Support Span | 40.0 ± 0.5 mm |
| Hammer Anvil Radius | R2–R2.5 mm, Included Angle: 30° ±1° |
| Support Radius | R1–R1.5 mm |
| Specimen Dimensions | 55.0 ± 0.6 mm (L) × 10.0 ± 0.1 mm (W) × 10.0 ± 0.05 mm (thickness, unnotched) or 8.0 ± 0.05 mm (notched residual thickness) |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | JJ-20B |
| Impact Energy | 4 J (Charpy), 5.5 J (Izod) |
| Impact Velocity | 2.9 m/s (Charpy), 3.5 m/s (Izod) |
| Pendulum Torque (Impact Constant) | 2.1436 N·m, 1.0718 N·m, 0.5359 N·m (for simply supported beam configurations) |
| Load Cell Range | 4 J / 5.5 J |
| Maximum Pendulum Lift Angle | 150° |
| Sampling Rate | 1.2 µs |
| A/D Resolution | 1/65536 |
| Span Options (Charpy) | 40 mm, 60 mm, 62 mm, 70 mm, 95 mm |
| Specimen Dimensions (Charpy) | 4×6×50 mm, 4×10×80 mm, 10×15×120 mm, 13×13×120 mm |
| Specimen Dimensions (Izod) | 4×10×80 mm, (3.2–12.7)×12.7×63.5 mm |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | JJ-300 |
| Impact Energy Capacity | 300 J / 150 J |
| Standard Compliance | GB/T 229–2007, GB 3808 |
| Load Measurement Range | 20,000 N |
| Load Sampling Rate | 1.2 µs |
| Load Resolution | 1/4000 |
| Load Accuracy | ≤1% |
| Angular Displacement Resolution | 360°/10,000 |
| Impact Velocity | 5.0–5.5 m/s |
| Striking Edge Radius | R2–R2.5 mm, Included Angle: 30° ±1° |
| Anvil Span | 40 ±0.5 mm |
| Specimen Dimensions | 55 ±0.6 mm (L) × 10 ±0.1 mm (W) × 10 ±0.05 mm (thickness, unnotched) or 8 ±0.05 mm (remaining thickness, V-notch) |
| Low-Temperature Chamber Range | Ambient to –20 °C |
| Cooling Rate | 0.7–1.0 °C/min |
| Temperature Uniformity | ±2 °C |
| Data Acquisition | High-speed load + angular displacement dual-channel synchronized sampling |
| Software Platform | Proprietary impact analysis suite with curve visualization, energy integration, and comparative reporting |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | JJ-4 |
| Instrument Type | Pendulum Impact Tester |
| Impact Energies | 2 J, 4 J, 7.5 J, 11 J, 15 J, 22 J, 25 J, 50 J, 2.75 J, 5.5 J |
| Impact Velocities | 2.9 m/s, 3.5 m/s, 3.8 m/s |
| Pendulum Torques (Impact Constants) | 0.5359 N·m, 1.0718 N·m, 1.4737 N·m, 2.1436 N·m, 2.9474 N·m |
| Load Cell Range | 50 J |
| Maximum Pendulum Lift Angle | 150° |
| Sampling Rate | 10 µs |
| Resolution | 1/4096 (load), 1/65536 (angular position) |
| Load Accuracy | ≤1% |
| Hammer Nose Angle | 30° (Charpy), 75° (Izod) |
| Nose Radius | 2 mm (Charpy), 0.8 mm (Izod) |
| Support Radius | 1 mm |
| Support Front/Back Angles | 5° / 10° |
| Span Lengths | 40 mm, 60 mm, 62 mm, 70 mm, 95 mm |
| Specimen Dimensions (Charpy) | 80 × 10 × 4 mm, 50 × 6 × 4 mm, 120 × 15 × 10 mm |
| Specimen Dimensions (Izod) | 63.5 × 12.7 × 3.2 mm, 63.5 × 12.7 × 6.4 mm, 63.5 × 12.7 × 12.7 mm, 80 × 10 × 4 mm (standard) |
| Power Supply | AC 220 V, 50 Hz |
| Brand | Changchun Intelligent |
|---|---|
| Origin | Jilin, China |
| Model | JM-3 |
| Max Impact Energy | 3 J |
| Specimen Dimensions | 100 mm × 100 mm |
| Clamp Aperture Diameters | Φ89 mm, Φ60 mm |
| Punch Diameters | Φ25.4 mm, Φ12.7 mm |
| Pendulum Arm Radius | 300 mm |
| Pendulum Lift Angle | 90° |
| Origin | Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | JJ-20 |
| Pricing | Available Upon Request |
| Max Impact Energy | 4 J (Simply Supported Beam), 5.5 J (Cantilever Beam) |
| Sampling Rate | 1.2 µs |
| A/D Resolution | 1/65536 |
| Load Range Selection | ×1, ×2, ×4, ×8 |
| Load Measurement Accuracy | ≤1% FS |
| Simply Supported Beam Span Options | 40, 60, 62, 70, 95 mm |
| Standard Specimen Dimensions (Simply Supported) | 4×6×50 mm, 4×10×80 mm, 10×15×120 mm, 13×13×120 mm |
| Cantilever Beam Specimen Dimensions | 4×10×80 mm, (3.2–12.7)×12.7×63.5 mm |
| Pendulum Impact Velocity | 2.9 m/s (0.5–4 J range), 3.50 m/s (Cantilever mode) |
| Compliance | GB/T 1043–1993, GB/T 1843–1996 |
| Brand | Jiubin Instruments |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-PSA14 |
| Quotation | Available Upon Request |
| Chamber Internal Dimensions | 710 × 540 × 600 mm (W×D×H) |
| Specimen Size | 120 × 200 mm (custom sizes available) |
| Air Pressure Range | 0–0.8 MPa (adjustable) |
| Nozzle Bore Diameter | 10.0 ± 0.1 mm |
| Air Orifice Diameter | 4 mm |
| Nozzle Assembly Length (incl. diffuser tube) | 111 mm |
| Distance from Nozzle Tip to Top Cover | 115 mm |
| Specimen Mounting Angle | 30° (flat-panel configuration) |
| Dust Extraction Fan | 370 W, 220 V, 50 Hz |
| Dust Collection Bin | 1 unit |
| Spray Gun | 1 unit |
| Observation Window | 1 unit |
| Brand | Qingji |
|---|---|
| Origin | Shanghai, China |
| Model | QJBC- |
| Maximum Load Capacity | 500 kN |
| Test Range | 20–500 kN (Accuracy: ±1%) |
| Drop Height Adjustment | 0–10,000 mm (Resolution: 0.1 mm) |
| Standard Weights | 2, 3, 4, 5, 10, 20, 50, 100 kg (AISI 1045 steel |
| Mass Tolerance | ±1%) |
| Compliance | ISO 148-1, ASTM E23, GB/T 229 |
| Control & Data System | QJLC17.7.Ttest — Integrated High-Speed Acquisition, Real-Time Force/Displacement/Energy Synchronization, Curve-Based Material Characterization |
| Brand | OK Instruments |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–42,000 (FOB) |
| Load Capacity | 10–100 kg |
| Table Dimensions | 20×20 to 80×65 cm |
| Acceleration Range | 150–15,000 m/s² |
| Pulse Duration | 0.5–30 ms |
| Waveform Options | Half-sine, Trapezoidal, Post-peak Sawtooth |
| Power Supply | AC 380 V ±5%, 3-phase 5-wire, 50/60 Hz ±0.5 Hz |
| Compliance | IEC 60068-2-27, MIL-STD-810H, GJB 150.18A, JIS C 0041, ASTM D999 |
| Brand | OK Instrumentation |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–42,000 (FOB) |
| Load Capacity | 10–100 kg |
| Table Dimensions | 20×20 to 80×65 cm |
| Acceleration Range | 150–15,000 m/s² |
| Pulse Duration | 0.5–30 ms |
| Waveform Options | Half-sine, Trapezoidal, Post-peak Sawtooth |
| Power Supply | AC 380 V ±5%, 50/60 Hz, 3-phase 5-wire |
| Brand | OK Instruments |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–42,000 (varies by model) |
| Load Capacity | 10–100 kg |
| Table Dimensions | 20×20 to 80×65 cm |
| Acceleration Range | 150–15,000 m/s² |
| Pulse Duration | 0.5–30 ms |
| Waveform Options | Half-sine, Trapezoidal, Post-peak Sawtooth |
| Power Supply | AC 380 V ±5%, 50/60 Hz, 3-phase 5-wire |
| Brand | OK Instrumentation |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–42,000 (FOB) |
| Load Capacity | 10–100 kg |
| Table Dimensions | 20×20 to 80×65 cm |
| Acceleration Range | 150–15,000 m/s² |
| Pulse Duration | 0.5–30 ms |
| Waveform Options | Half-sine, Trapezoidal, Post-peak Sawtooth |
| Power Supply | AC 380 V ±5%, 50/60 Hz, 3-phase 5-wire |
| Brand | OK Instruments |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–42,000 (based on model) |
| Load Capacity | 10–100 kg |
| Table Dimensions | 20×20 to 80×65 cm |
| Acceleration Range | 150–15,000 m/s² |
| Pulse Duration | 0.5–30 ms |
| Waveform Options | Half-sine, Trapezoidal, Post-peak Sawtooth |
| Power Supply | AC 380 V ±5%, 50/60 Hz, 3-phase 5-wire |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Max. Test Mass | 75–500 kg |
| Shock Waveforms | Square Pulse & Half-Sine Pulse |
| Max. Acceleration | 1500 m/s² (150 g) for Square, 6000 m/s² (600 g) for Half-Sine |
| Max. Velocity Change | 7.6 m/s (Square), 7.3 m/s (Half-Sine) |
| Pulse Duration Range | 2–60 ms |
| Table Sizes | 500×500 mm to 1500×1500 mm |
| Compliance | JIS C 0041:1995, JIS Z 0119:1994, JIS Z 0202:1994, IEC 60068-2-27, MIL-STD-810E Method 516.3 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Max Test Load | 50–1000 kg |
| Worktable Dimensions | 50×50 cm to 120×120 cm |
| Pulse Peak Acceleration Range | 150–6000 m/s² (semi-sine), 150–2000 m/s² (haversine), 150–1000 m/s² (terminal-peak sawtooth & trapezoidal) |
| Pulse Duration | 18–1 ms (adjustable per waveform) |
| Waveform Options | Semi-sine, Terminal-Peak Sawtooth, Trapezoidal |
| Base Material | High-Strength Carbon Steel |
| Height Control | Digital Position Feedback System |
| Braking Mechanism | Integrated Hydraulic Brake |
| Isolation System | Imported Air Spring + Hydraulic Damping |
| Compliance | Designed per ISO 2247, ASTM D999, MIL-STD-810G Method 516.6 (Shock) |
| Changchun Intelligent JJ-20 Cryogenic Impact Testing Machine (Dual-Mode | Charpy & Izod) |
|---|---|
| Origin | Jilin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JJ-20 |
| Pricing | Available Upon Request |
| Max Impact Energy | 4 J (Charpy), 5.5 J (Izod) |
| Sampling Rate | 1.2 µs |
| A/D Resolution | 1/65536 |
| Load Range Selection | ×1, ×2, ×4, ×8 |
| Load Measurement Accuracy | ≤1% FS |
| Charpy Span Options | 40 mm, 60 mm, 62 mm |
| Charpy Specimen Dimensions | 4×6×50 mm, 4×10×80 mm |
| Izod Specimen Dimensions | 4×10×80 mm |
| Charpy Pendulum Velocity | 2.9 m/s |
| Izod Pendulum Velocity | 3.50 m/s |
| Temperature Range | –40 °C to ambient |
| Temperature Stability | ±0.5 °C |
| Temperature Uniformity | ±2 °C |
| Sample Handling | Semi-automatic feed, manual positioning |
| Origin | Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China-made) |
| Model | JJ-20W |
| Quotation | Available Upon Request |
| Impact Energy Range | 0.5 J, 1 J, 2 J, 4 J, 7.5 J |
| Sampling Rate | 1.2 µs |
| A/D Resolution | 1/65536 |
| Load Measurement Accuracy | ≤2% |
| Span Options | 60 mm, 62 mm |
| Specimen Thickness | 4 mm, 10 mm, 13 mm |
| Specimen Width | 6 mm, 10 mm, 13 mm, 15 mm |
| Pendulum Impact Velocity (0.5–4 J) | 2.9 m/s |
| Low-Temperature Range | –60 °C (cascade refrigeration), –120 °C (liquid nitrogen injection) |
| High-Temperature Range | up to +200 °C (electric heating) |
| Temperature Control Accuracy | ±1 °C |
| Compliance | GB/T 1043.1–1993 (Charpy & Izod impact testing of rigid plastics) |
| Brand | Guance Instruments |
|---|---|
| Origin | Beijing, China |
| Model | GCCLC-AII |
| Impact Energy Range | 50–300 J |
| Impact Velocity | 2–5.5 m/s |
| Pendulum Torque (Impact Constant) | 15 N·m |
| Load Cell Capacity | 16 kN |
| Maximum Lifting Height | 1500 mm |
| Temperature Chamber Range | −40 °C to +100 °C |
| System Sampling Rate | 2 MHz |
| A/D Resolution | 16-bit |
| Frequency Response | 500 kHz |
| Dynamic Test Error | <2% |
| Overall Dimensions (w/o chamber) | 850 × 1700 × 3300 mm |
| Net Weight | 1200 kg |
| Brand | Galdabini |
|---|---|
| Origin | Italy |
| Model | Impact25 |
| Maximum Impact Energy | 25 J |
| Test Configurations | Charpy (simply supported beam), Izod (cantilever beam), and Tensile Impact |
| Compliant Standards | ASTM D256, ASTM D6110, ISO 180, ISO 179, DIN 53438, EN ISO 8256, JIS K7111 |
| Control System | Microprocessor-based with automatic friction compensation |
| Data Interface | RS-232 serial port |
| Software Support | GraphWork data analysis suite |
| Certification | Manufactured in accordance with ISO 9001 quality management system |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer | GBPI Packaging Equipment Co., Ltd. |
| Model | GBD-I1 |
| Instrument Type | Dart Impact Tester |
| Impact Mass Range | 50–2000 g (5 g increments, mass tolerance ≤ ±0.5%) |
| Dart Tip Diameter | A-method: 38 ± 1 mm |
| B-method | 50 ± 1 mm |
| Clamp Dimensions | Outer Ø 150 mm, Inner Ø 125 mm |
| Maximum Drop Height | 1500 mm (standard), 660 mm (low-height configuration) |
| Force Sensor Capacity | 50 kg |
| Test Accuracy | ±1 g |
| Compliance Standards | ISO 7765-1, ASTM D1709, GB/T 9639, GB/T 15267, JIS K7124 |
| Power Supply | AC 220 V, 50 Hz |
| Dimensions (L×W×H) | 650 × 650 × (2200–2600) mm |
| Net Weight | 50 kg |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | GBG-L2 |
| Instrument Type | Pendulum Impact Tester |
| Nominal Impact Energy | 5 J (8 J optional) |
| Energy Resolution | 0.001 J |
| Pendulum Lift Angle | 90° |
| Pendulum Radius | 285 mm |
| Impact Tip Diameter | Φ19 mm and Φ25.4 mm |
| Clamp Aperture | Φ60 mm and Φ89 mm |
| Specimen Size | 100 mm × 100 mm |
| Dimensions (L×W×H) | 773 mm × 378 mm × 606 mm |
| Power Consumption | 75 W |
| Supply Voltage | AC 220 V, 50 Hz |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Pendulum Impact Tester |
| Nominal Impact Energy | 5 J (8 J optional) |
| Resolution | 0.001 J |
| Pendulum Lift Angle | 90° |
| Pendulum Radius | 285 mm |
| Impact Tip Diameter | Φ19 mm / Φ25.4 mm |
| Clamp Aperture | Φ60 mm / Φ89 mm |
| Specimen Size | 100 mm × 100 mm |
| Dimensions (L×W×H) | 773 mm × 378 mm × 606 mm |
| Power Consumption | 75 W |
| Supply Voltage | AC 220 V, 50 Hz |
| Brand | GuanCe Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CLC-AI |
| Quotation | USD 4,200 (FOB Beijing) |
| Instrument Type | Drop-Weight Impact Tester |
| Impact Energy | 300 J |
| Impact Velocity | 25 m/s |
| Hammer Moment (Impact Constant) | 24 N·m |
| Load Cell Range | 300 kN |
| Maximum Lift Height | 1500 mm |
| Hammer Mass Options | 5 kg / 15 kg / 20 kg (customizable) |
| Effective Impact Height | 1500 mm |
| Dimensions (L×W×H) | 1200 × 700 × 2100 mm |
| Weight | 300 kg |
| Brand | GuanCe |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | CLC-AI3 |
| Quotation | USD 2,200 (FOB Beijing) |
| Instrument Type | Drop-Weight Impact Tester |
| Maximum Impact Energy | 0–150 J |
| Maximum Impact Velocity | 5.5 m/s |
| Hammer Mass Options | 2–10 kg (standard configurations: 5 kg, 15 kg, 20 kg) |
| Displacement Resolution | 0.01 mm |
| Crosshead Speed Range (for auxiliary positioning) | 0.01–1000 mm/min (infinitely adjustable) |
| Maximum Lift Height | 1500 mm |
| Dimensions (L×W×H) | 1200 × 700 × 2100 mm |
| Net Weight | 300 kg |
| Compliance | ISO 3127, ISO 6603, ISO 7765, ISO 8256, ISO 11343, PREN 6038, DIN 53373, ASTM D2444, ASTM D3763, ASTM D5628, ASTM D7136, ASTM D7192 |
| Brand | GuanCe |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CLC-AI8 |
| Instrument Type | Drop-Weight Impact Tester |
| Impact Energy | 100 kN·mm (equivalent to 98 J at 2 m drop height) |
| Impact Velocity | 9.8 m/s (theoretical free-fall velocity from 4.9 m |
| Hammer Mass Options | 5 kg / 15 kg / 20 kg |
| Maximum Lift Height | 2000 mm |
| Load Cell Range | 100 kN |
| Effective Impact Height Range | 1500 mm |
| Frame Dimensions (L×W×H) | 1200 × 700 × 2100 mm |
| Unit Weight | 300 kg |
| Compliance | ISO 3127, ISO 6603, ISO 7765, ISO 8256, ISO 11343, ASTM D2444, ASTM D3763, ASTM D5628, ASTM D7136, ASTM D7192, DIN 53373, prEN 6038 |