Ray-Ran
Filter
Showing all 12 results
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | CNC2 |
| Weight | 150 kg |
| Dimensions (W×D×H) | 1230 × 830 × 830 mm |
| Power Supply | 220–240 VAC, 50 Hz, Single-Phase |
| Spindle Power | 1.5 kW |
| Spindle Speed Range | 2,400 – 24,000 rpm |
| XYZ Travel Range (approx.) | 600 × 300 × 175 mm |
| Worktable Size | 910 × 480 mm |
| Guidance System | High-Precision Linear Rails & Ball Screws |
| Safety Enclosure | Fully Interlocked, Light-Protected Cabinet with Internal LED Lighting and Emergency Stop |
| Control Software | FlashCut CNC (PC-Based, Not Included) |
| Brand | Ray-Ran |
|---|---|
| Origin | Netherlands |
| Model | DGA |
| Net Weight (3-column) | 70 kg |
| Net Weight (6-column) | 80 kg |
| Dimensions (3-column) | 850 × 400 × 1110 mm (W×D×H) |
| Dimensions (6-column) | 1200 × 400 × 1110 mm (W×D×H) |
| Power Supply | 110–240 VAC, 50–60 Hz |
| Display | 160 × 128 pixel alphanumeric graphical LCD with backlight |
| Temperature Control Accuracy | ±0.1 °C |
| Optical Magnification | 7× |
| Cooling | Integrated mini-USB compatible cooling coil |
| Pumping System | Variable-speed peristaltic pump |
| Calibration | Automated density calibration with traceable certificate |
| Compliance | CE-marked, conforms to EN 61000-6-3 and EN 61000-6-2 |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | FDT |
| Net Weight | 50 kg |
| Dimensions (W×D×H) | 530 × 720 × 1100 mm (standard) |
| Power Supply | 110–240 VAC, 50–60 Hz |
| Display | 160 × 128 pixel alphanumeric graphic LCD with keypad |
| Compliance | ISO 7765, ASTM D1709 Method A |
| Fixture | Pneumatic clamping system |
| Drop Height | Fixed at 0.66 m |
| Standard Weights | 2 × 5 g, 8 × 15 g, 8 × 30 g, 8 × 60 g |
| Test Modes | Pass/Fail counter for impact failure assessment |
| Safety | Dual-hand release mechanism |
| Mounting | Benchtop configuration |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | FWT |
| Voltage | 110 V or 240 V AC |
| Display | Integrated touchscreen interface |
| Load Cell Options | 5 kN, 13 kN, 22 kN, 45 kN |
| Operating Pressure Range | 80–150 PSI (5.5–10.3 bar) |
| Drop Heights | 1 m, 2 m, 3.35 m |
| Maximum Impact Energy | 1100 J |
| Maximum Impact Velocity | 8.1 m/s |
| Drop Mass Range | 1–35 kg |
| Safety System | Full electrical interlock with cabinet door sensing |
| Release Mechanism | Solenoid-actuated bracket release |
| Return System | Pneumatic carrier return |
| Guidance | Dual vertical precision rails with low-friction bearings |
| Rebound Arrest | Standard anti-rebound mechanism |
| Height Measurement | Digital height readout |
| Sample Chamber Clearance | Up to Ø400 mm (customizable for larger diameters) |
| Fixture Options | Adjustable vertical support fixture |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | IMT |
| Net Weight | 110 kg |
| Dimensions (W×D×H) | 630 × 500 × 760 mm |
| Power Supply | 110–240 VAC, 50–60 Hz |
| Display | 160 × 128 dot matrix graphic LCD with alphanumeric keypad |
| Pendulum Velocity Range | up to 3.8 m/s |
| Maximum Hammer Energy | 50 J |
| Impact Energy Units | kJ/m and kJ/m² |
| Compliance | CE-marked |
| Calibration | Traceable certificate provided |
| Interface Options | RS232, Ethernet (LAN) |
| Position Sensing | High-resolution optical encoder |
| Self-calibration | Automatic compensation for air resistance and bearing friction |
| Test Configurations | Charpy (notched/unnotched), Izod (notched/unnotched), tensile impact, component & pipe testing |
| Safety | Electromagnetic hammer release, integrated safety guard, audible pre-impact warning |
| Software | Techni-Test PC software for data acquisition, statistical analysis (mean, SD, CV), trend charts and export (CSV, PDF) |
| Leveling | Motorized electronic auto-leveling system |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | MFR200 |
| Load Cell Resolution | 0.1 g |
| Temperature Range | Ambient to 450 °C (±0.2 °C stability) |
| Standard Orifice | 2.095 mm diameter × 8.00 mm length |
| Piston Travel | 30 mm |
| Cut-Off Timing Accuracy | ±0.1 s |
| Weight Loading Options | Manual or Pneumatic (up to 11 bar, equivalent to ~21.6 kg force) |
| Compliance | ASTM D1238, ISO 1133-1 & ISO 1133-2, GB/T 3682 |
| Brand | Ray-Ran |
|---|---|
| Origin | Netherlands |
| Model | MFR300 |
| Temperature Range | 0–450 °C (500 °C optional) |
| Temperature Accuracy | ±0.10 °C |
| Temperature Resolution | 0.10 °C |
| Piston Displacement Resolution | ±0.02 mm |
| Heating Zones | Dual-zone |
| Power Supply | 110 V/60 Hz or 220 V/50 Hz, 10 A fuse |
| Connectivity | Wi-Fi, USB, Ethernet |
| Compliance | ISO 1133, ASTM D1238, GB/T 3682 |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | PCP |
| Weight | 72 kg |
| Dimensions (W×D×H) | 300 × 300 × 630 mm |
| Operating Air Pressure | 10 bar (145 psi) |
| Maximum Punch Force | 50 kN |
| Compatible Die Shank Diameter | 25 mm (standard), custom shanks available |
| Cutting Plate Material | Polypropylene |
| Safety Guard | Polycarbonate interlocked shield |
| Base Footprint | 500 × 300 mm |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | X100 |
| Load Capacity | 1 kN |
| Load Accuracy | ±0.5% of reading down to 0.1% of sensor full scale |
| Effective Travel | 420 mm / 670 mm |
| Vertical Clearance | 600 mm / 850 mm |
| Position Resolution | 0.0001 mm |
| Speed Range | 0.001–2000 mm/min |
| Speed Accuracy | ±0.1% at steady state |
| Maximum Speed at Full Load | 2000 mm/min |
| Data Acquisition Rate (PC-based) | 500 Hz |
| Interface | USB |
| Frame Type | Single-column, benchtop |
| Frame Stiffness | 5 kN/mm |
| Weight | 24 kg / 26 kg |
| Operating Temperature | −10 °C to +40 °C |
| Power Consumption | 0.2 kW |
| Overload Protection | 800% of sensor capacity |
| Motor & Drive | Brushless servo motor with digital AC servo drive, 20,000 pulses/rev position feedback |
| Guidance System | Cross-roller bearing rails |
| Lead Screw | Preloaded, self-cleaning ball screw, lifetime sealed lubrication |
| Enclosure | Retractable dust shield over lead screw |
| Compliance | ASTM E4, ISO 7500-1, ISO 5893, USP <1041>, FDA 21 CFR Part 11 (software-enabled), GLP/GMP audit trail capable |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | X250-1 / X250-2.5 / X250-3 |
| Load Capacity | 1 kN / 2.5 kN / 3 kN |
| Load Accuracy | ±0.5% of reading, down to 0.1% of sensor full scale |
| Effective Test Stroke | 630 mm / 990 mm / 990 mm |
| Vertical Clearance | 800 mm / 1160 mm / 1160 mm |
| Position Resolution | 1 µm |
| Throat Depth | 108 mm |
| Speed Range | 0.00001–2500 mm/min |
| Speed Accuracy | ±0.1% at steady state |
| Maximum Force at Full Speed | 1 kN / 2.5 kN / 3 kN |
| Data Acquisition Rate | 500 Hz (optional 1000 Hz) |
| Connectivity | Ethernet (USB via adapter optional) |
| Frame Stiffness | 8 kN/mm |
| Weight | 58 kg / 65 kg / 65 kg |
| Operating Temperature | −10 °C to +40 °C |
| Humidity | 10–90% RH (non-condensing) |
| Power Supply | 230 V, 1-phase, 50/60 Hz (115 V option available) |
| Power Consumption | 0.3 kW |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | X350 |
| Load Capacity | 5 kN / 10 kN / 20 kN |
| Load Accuracy | ±0.5% of reading down to 0.1% of sensor full scale |
| Effective Test Stroke | 1100 mm |
| Vertical Clearance | 1275 mm |
| Position Resolution | 1 µm |
| Minimum Speed | 0.00001 mm/min |
| Maximum Speed | 2000 mm/min |
| Speed Accuracy | ±0.1% at full speed under steady-state conditions |
| Crosshead Stiffness | 50 kN/mm |
| Data Acquisition Rate | 500 Hz (optional 1000 Hz) |
| PC Interface | Ethernet (USB via adapter optional) |
| Frame Type | Dual-column, bench-mounted (floor cabinet optional) |
| Weight | 120 kg |
| Operating Temperature | −10 °C to +40 °C |
| Power Consumption | 0.45 kW |
| Overload Protection | Up to 800% of sensor capacity |
| Motor Type | Brushless AC servo motor with 4,000,000 steps/revolution positioning resolution |
| I/O Channels | 6 digital I/O for extensometers, micrometers, calipers, balances, etc. |
| Additional Features | Self-cleaning preloaded ball screws |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | X500 |
| Load Capacity | 25 kN / 30 kN / 50 kN / 100 kN |
| Load Accuracy | ±0.5% of reading, down to 0.1% of sensor capacity |
| Effective Test Stroke | 1025 mm / 1025 mm / 950 mm / 1100 mm |
| Vertical Clearance | 1225 mm / 1225 mm / 1150 mm / 1300 mm |
| Position Resolution | 1 µm |
| Minimum Speed | 0.00001 mm/min |
| Maximum Speed | 1000 mm/min / 1000 mm/min / 1000 mm/min / 500 mm/min |
| Speed Accuracy | ±0.1% at full speed under steady-state conditions |
| Crosshead Stiffness | 120 kN/mm / 120 kN/mm / 220 kN/mm / 400 kN/mm |
| Data Acquisition Rate | 500 Hz (optional 1000 Hz) |
| Connectivity | Ethernet (USB via adapter optional) |
| Frame Type | Dual-column, benchtop-mountable (floor cabinet optional) |
| Weight | 155 kg / 155 kg / 195 kg / 235 kg |
| Operating Temperature | 10–90 °C |
| Power Requirement | 1 kW |