Rtec
Filter
Showing 1–30 of 34 results
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | AJ-1000 |
| Maximum Test Force | Not applicable |
| Frequency Range | Not applicable |
| Host Weight | 320 kg |
| Operating Temperature Range | Up to 900 °C (PID-controlled, closed-loop) |
| Particle Velocity Range | 30–150 m/s |
| Abrasive Feed Rate | 1–10 g/min |
| Hopper Capacity | 1 L |
| Impact Angles | 15°, 30°, 45°, 60°, 90° |
| Compliance Standards | ASTM G76, ASTM G211-14 |
| Velocity Measurement Method | Dual-rotating-disk time-of-flight |
| Control Interface | Touchscreen HMI |
| Brand | Rtec |
|---|---|
| Origin | USA |
| Model | BOR-3000 |
| Load Capacity | Up to 3000 N |
| Rotational Speed Range | 0.1–5000 rpm (0.1 rpm resolution) |
| Temperature Range | Ambient to +200 °C |
| Optional Low-Temp Control | −40 °C to +200 °C |
| Optional High-Temp Control | Ambient to +500 °C |
| Test Standards Compliance | ASTM G77, ASTM D2509, ASTM D2714, ASTM D2782, ASTM D2981, ASTM D3704, SH/T 0203, GB/T 11144 |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | BOR-3000 |
| Application | Friction and Wear Testing |
| Compliance | ASTM D3704, D2509, D2782, D2981, G77, G176 |
| Max Load | 10,000 N |
| Max Speed | 5000 rpm |
| Temp Range | Up to 500 °C |
| Torque Measurement | In-line high-resolution |
| Test Modes | Continuous, Reciprocating, Stepped Load, Oscillatory |
| Sample Mounting | Modular block holder for shafts, bearings, seals, rings, thrust/conical rollers |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | Brake-5000 |
| Instrument Type | Multifunctional Tribological Tester |
| Compliance | SAE J2522, ISO 6310, ASTM G99, ASTM D3702 |
| Drive Configuration | Dual-axis rotational (upper/lower spindle), high-torque motorized actuation |
| Data Acquisition | Real-time synchronized logging of normal load, friction torque, coefficient of friction (μ), sliding velocity, interface temperature, acoustic emission, wear depth, and volumetric wear loss |
| Control Modes | Programmable acceleration/deceleration profiles, constant-speed braking, step-load cycling, environmental conditioning (optional humidity/temperature chamber integration) |
| Software | Rtec Tribos™ v8.2 with GLP-compliant audit trail, FDA 21 CFR Part 11 user role management, and automated report generation per ISO/IEC 17025 requirements |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | CP-6 |
| Dimensions (L×W×D) | 770 × 920 × 1860 mm |
| Platen Count | 1 |
| Platen Diameter | 400 mm |
| Platen Speed | 0–90 rpm |
| Integrated In-situ Sensors | Friction Torque, Acoustic Emission, Surface Temperature |
| Motion Control | Motorized X-Y Stage with Programmable Wafer Oscillation |
| In-line 3D Profilometry | Confocal + Interferometric + Bright/Dark Field Modes |
| Vertical Load Range | Programmable (Typical Range: 0–50 N, Configurable per Application) |
| Sample Compatibility | 50–300 mm wafers and substrates |
| Compliance | Designed for ASTM F2639, ISO/IEC 17025-aligned workflows, supports GLP/GMP data integrity requirements |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | FBT-1000 |
| Test Types | EP (Extreme Pressure) and Wear Testing |
| Temperature Range | –40 °C to 200 °C (optional up to 400 °C) |
| Maximum Load | 12,000 N |
| Rotational Speed | Up to 1800 rpm |
| Real-time Monitoring | Torque, Load, Temperature, Acoustic Emission, Friction Coefficient |
| Compliance | ISO 12583, ASTM D2266, D2596, D2783, D4172, DIN 51350, BS EN ISO 20623, CEC L-45-A-99 |
| Sample Compatibility | Lubricating oils, greases, additives, solid lubricants |
| Data Resolution | Sub-micron wear scar measurement via integrated 3D profilometry |
| Brand | Rtec |
|---|---|
| Origin | USA |
| Model | FBT-12000 |
| Load Capacity | Up to 12,000 N (closed-loop servo-controlled) |
| Torque Measurement Range | 0–20 N·m |
| Rotational Speed | 0–3000 rpm (0.1 rpm resolution) |
| Temperature Range | Ambient to +150 °C |
| Optional Low-Temperature Control | Ambient to –40 °C |
| Compliance | ASTM D2596, D2783, D2266, D4172, D5183 |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | FFT-1 |
| Instrument Type | Reciprocating Friction and Wear Tester |
| Maximum Normal Load (Fz) | Up to 5000 N |
| Maximum Test Temperature | 500 °C |
| Compliance | ISO 19291, ASTM E2789, ASTM D6425, ASTM D7421, ASTM D5707, ASTM D5706, ASTM D7594, DIN 51834-2/3/4 |
| Environmental Control | Integrated temperature chamber (−40 °C to 500 °C), optional humidity control |
| Sensor Integration | Displacement sensor, Acoustic Emission (AE) sensor, Contact Resistance sensor |
| Software | Real-time closed-loop control with customizable test scripting, statistical data reporting, GLP-compliant audit trail, FDA 21 CFR Part 11 ready configuration |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | FFT-M |
| Application | Lubricity & Wear Evaluation of Diesel/Gasoline Fuels |
| Standards Compliance | ASTM D6079, ISO 12156-1, SH/T 0765-2005 |
| Frequency Range | 0.1–300 Hz |
| Stroke | 10 µm–4.0 mm |
| Load Capacity | Up to 10 N or 300 N (configurable) |
| Temperature Range | −40 °C to +500 °C |
| Humidity Control | 5–95% RH (closed-loop) |
| Ball Diameter | Standard 6 mm (1.6–12.7 mm optional) |
| Disk Dimensions | 10 mm diameter × 3 mm thickness (custom sizes available) |
| Real-time Force Feedback | Piezoelectric load sensor |
| Friction & Wear Output | Dynamic coefficient of friction, total wear scar depth, acoustic emission, in-situ film formation monitoring |
| Environmental Control | Inert gas purge capability (N₂, Ar), programmable atmosphere management |
| Brand | Rtec |
|---|---|
| Origin | USA |
| Model | FFT-M1 |
| Application | Tribological Evaluation of Fuels and Lubricants |
| Compliance | ASTM D6079, ISO 12156-1, SH/T 0765, EN 590, JPI-5S-50-9, IP 450 |
| Load Range | 0–1.0 kg |
| Frequency Range | 1–300 Hz |
| Stroke Amplitude | 0.005–2 mm |
| Operating Temperature | Ambient to +200 °C |
| Test Mode | Boundary Lubrication Assessment under Oscillatory Sliding Conditions |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | FT-100 |
| Thickness Range | 1 nm – 1.8 mm |
| Wavelength Range | 200 nm – 1700 nm |
| Precision | <0.01 nm or 0.01% |
| Stability | <0.02 nm or 0.03% |
| Spot Size | 4 µm – 200 µm (optional 2 mm field) |
| Measurement Capabilities | Single/multilayer thickness, refractive index (n), extinction coefficient (k), reflectance, transmittance |
| Sample Compatibility | Transparent, semi-transparent, low-absorption films—including liquid films and air-gap layers |
| Platform Integration | Compatible with XY motorized stages for full-sample thickness mapping |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | HPT-1000 |
| Maximum Operating Temperature | 1200 °C |
| Maximum Closed-Loop Load | 2000 N |
| Environmental Control | Inert Gas Sealed Chamber (N₂/Ar) |
| Sample Stage | Motorized XY Positioning System |
| Compliance | ASTM E23, ISO 6507, ISO 14577, USP <1031>, FDA 21 CFR Part 11 (Software Module) |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MBT-5000 |
| Instrument Type | Multifunctional Tribological Tester |
| Load Capacity | Up to 10 kN (customizable) |
| Motion Modes | Continuous Rotation & Oscillatory Motion |
| Temperature Control | Integrated Heating & Real-time Monitoring |
| Electrical Contact Resistance (ECR) Testing | Supported (programmable current/voltage) |
| Force Sensor | High-resolution capacitive tribometer |
| Software | Fully Integrated Control, Data Acquisition, and Analysis Suite with Logic-Based Test Termination |
| Compliance | Designed for ASTM D3702, ISO 20808, ISO 7148-1, and GLP/GMP-aligned data audit trails (21 CFR Part 11-ready configuration available) |
| Brand | Rtec |
|---|---|
| Origin | USA |
| Model | MFT-3000 |
| Load Range | 0–3000 N |
| Reciprocating Stroke | 0–30 mm |
| Frequency Range | 0–80 Hz |
| Temperature Control | Ambient to +500 °C (up to +1000 °C optional) |
| Low-Temperature Option | Ambient to –60 °C |
| Thermal Cycling Option | –40 °C to +180 °C |
| Rotational Mode (optional) | 0.1–5000 rpm, 0.1 rpm resolution |
| Compliance | ASTM G133, G181, G119, G174, D5706, D5707, SH/T 0784, SH/T 0721, DIN 51834 |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MFT-4000 |
| Instrument Type | Multi-Function Tribological Tester |
| Application Focus | Biomaterials Evaluation |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MFT-5000 |
| Maximum Friction Force | 3000 N |
| Friction Force Resolution | 0.1 mN |
| Maximum Temperature | 1200 °C |
| Load Range | 1 mN – 12,000 N |
| XY Stage Travel | X = 150 mm, Y = 210 mm |
| Positional Resolution | 0.1 µm (XY), 0.25 µm / 10 nm (Z) |
| Rotational Speed | 0.001 – 10,000 rpm |
| Reciprocating Frequency | up to 70 Hz |
| Stroke Range | 0.1 – 40 mm |
| Environmental Chamber Range | −120 °C to 1200 °C, 5–95% RH, vacuum down to 10⁻⁷ Torr, corrosive/atmospheric/gas/liquid/humidity/high-pressure options |
| In-situ 3D Topography | Confocal + White-Light Interferometry + Dark/Bright Field |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MFT-5000-EC |
| Instrument Type | Multifunctional Tribological Tester |
| Max Normal Load | 5000 N |
| Friction Force Resolution | 5 mN |
| Max Operating Temperature | 500 °C |
| Temperature Control Range | −25 to 150 °C |
| Humidity Control Range | 10–95 % RH |
| Reciprocating Frequency | 0.1–60 Hz |
| Reciprocating Stroke | up to 25 mm |
| Rotational Speed (CW) | 0.1–3000 rpm |
| Rotational Speed (CCW) | 0.001–100 rpm |
| Minimum Sliding Velocity | 0.1 µm/s |
| Electrochemical Configuration | Three-electrode system (working, counter, reference) |
| Liquid Circulation | Dynamic and passive |
| Environmental Chamber | Electrically insulated, splash-resistant |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MFT-5000-H |
| Maximum Normal Load | 12,000 N |
| Friction Force Resolution | 20 µN |
| Maximum Operating Temperature | 1200 °C |
| Motion Modes | Rotational & Reciprocating |
| Atmosphere Options | Inert Gas (N₂, Ar) |
| Thermal Drift Compensation | Active Cooling & Sensor Isolation |
| Compliance | ASTM G99, ISO 20808, ASTM D3702, ISO 7148-1 |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MFT-5000-HD |
| Instrument Type | Integrated Nanoindentation and Scratch Tester |
| Maximum Test Temperature | 1200 °C |
| Environmental Control | Inert Gas (Ar/N₂) or Vacuum (down to 10⁻⁷ mbar) |
| Load Range | 0.25–2000 N |
| Load Resolution | < 0.1% of full scale |
| Temperature Uniformity | ±2 °C across sample zone |
| Sample Stage | Motorized XY with programmable multi-point mapping |
| Compliance | ASTM E18, ISO 6508, ISO 14577, ASTM G171 (scratch), ASTM C1327 (ceramics) |
| Operating System | Windows 10 Professional |
| Power Supply | 110/220 V AC, 50/60 Hz |
| Environmental Chamber | Sealed, water-cooled, dual-zone heated |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MFT-5000-SST |
| Maximum Normal Load (Fz) | 5000 N |
| Friction Force Resolution | 5 µN |
| Maximum Operating Temperature | 150 °C |
| Environmental Chamber Compatibility | Salt Fog (ASTM B117, ISO 9227 compliant) |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MFT-EF |
| Type | Multifunctional Tribological Tester |
| Category | Import Instrument |
| Distributor Type | Authorized General Distributor |
| Pricing | Available Upon Request |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MPT-3000 |
| Maximum Friction Force | 8000 N |
| Friction Force Resolution | 0.15 N |
| Maximum Test Temperature | 150 °C |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | MVT-2 |
| Instrument Type | Multi-Functional Tribological Tester |
| Maximum Friction Force | 200 N |
| Friction Force Resolution | 0.25 µN |
| Temperature Range | −150 °C to +400 °C (with vacuum) |
| Environmental Control | High-Vacuum Compatible (≤10⁻⁶ mbar), Integrated Cryogenic Cooling & Anti-Condensation System |
| Load Control | Closed-Loop Servo-Driven, Programmable Constant/Linear Ramp Force |
| Motion Control | Precision Servo Motor, Adjustable Rotational/Linear Speed Profile |
| Data Acquisition | Multi-Channel, High-Speed (≥10 kHz), Low-Noise Controller |
| Software | Real-Time Control & Post-Processing Suite with ASTM/ISO Compliant Reporting Templates |
| Compliance | Supports GLP/GMP Audit Trail (21 CFR Part 11 Ready), ISO 20808, ASTM G99, ASTM D3702, ISO 7148-1 |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | Slurry-Jet |
| Instrument Type | Multi-Functional Tribological Tester |
| Application Category | Erosion & Erosion-Corrosion Testing |
| Compliance Context | ASTM G73, ASTM G119, ISO 8501-1, ISO 12944-5 |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | SMT-2000 |
| Instrument Type | Nanoindentation and Scratch Tester |
| Compliance Standards | ASTM E2546, ASTM B933, ASTM D785, ASTM E140, ISO 14577, ISO 6508, ISO 6507, ISO 4516, DIN 50359, DIN 55676, JIS B7734 |
| Actuation | Piezoelectric ceramic drive |
| Sensing Technology | Capacitive displacement sensing |
| Load Range | Nanonewton to 10 N (full-scale) |
| Vertical Resolution | Sub-nanometer |
| Lateral Sample Dimensions | Up to 500 mm × 500 mm |
| Maximum Sample Weight | 10 kg |
| Tip Options | Berkovich, Vickers, spherical, cube-corner, Knoop |
| In-situ 3D topography mapping | Yes |
| Active vibration isolation | Integrated platform |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | SMT-5000 |
| Instrument Type | Nanoindentation and Scratch Tester |
| Maximum Indentation Depth | 500 µm |
| Effective Load Range | 0.1–200 N |
| Load Resolution | 0.1 N |
| Displacement Range | 100 mm |
| Displacement Resolution | 1 nm |
| Maximum Friction Force | 100 N |
| Indenter Type | Diamond |
| Brand | Rtec |
|---|---|
| Origin | USA |
| Type | Electromagnetic Oscillating Tribometer |
| Load Range | 1–3000 N |
| Frequency Range | 1–500 Hz |
| Oscillation Amplitude | 0.005–4 mm |
| Temperature Range | Ambient to +400 °C (optional up to +1000 °C) |
| Force Sensing | High-accuracy piezoelectric tribosensors |
| Displacement Monitoring | LVDT-based real-time closed-loop control |
| Compliance Standards | ASTM D5706, D5707, D6425, D7421, D7594, E2789 |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | Surf-2 |
| Force Range (Tensile/Shear/Peel) | 0.1 mN to 5 N |
| Force Resolution | 0.1 µN |
| Displacement Resolution | 1 µm |
| Test Speed | 0.01–5 mm/s |
| Integrated Inverted Microscope | Brightfield & Darkfield Imaging |
| Contact Area Measurement | Real-time, automated |
| Floor Noise (RMS) | 0.1 µN |
| Footprint | Compact desktop design |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | TM-2000 |
| Instrument Type | Multi-Function Tribological Tester |
| Speed Range | ±6 m/s |
| Contact Configuration | 19.05 mm steel ball vs. 46 mm steel disc |
| Control System | Closed-loop servo-driven |
| Temperature Control | Real-time, programmable |
| Data Output | Load, traction force, velocity, SRR, film thickness (optional module) |
| Compliance | ASTM D5001, ISO 12156-1, DIN 51834 (applicable modes) |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | TRT-1000 |
| Maximum Friction Force | 8000 N |
| Friction Force Resolution | 0.15 N |
| Maximum Test Temperature | 150 °C |
| Drive Type | Dual High-Torque Servo Motors |
| Force Actuation | Electromechanical Servo Loading |
| Environmental Control | Integrated Temperature Chamber (–20 °C to 150 °C) |
| Data Acquisition Rate | Up to 200 kHz |
| Compliance | ASTM D4170, ISO 6856, DIN 51819-1, EN 15380, GLP-Compatible Logging |