Fatigue Testing Machines
Filter
Showing 1–30 of 123 results
| Brand | AcroEdge |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Syclus |
| Instrument Category | Compact Vibration-Based Fatigue Tester |
| Frequency Range | 1–20 Hz |
| Maximum Displacement Amplitude | ±600 µm |
| Load Capacity | ±25 N (±0.5% nonlinearity) |
| Sample Dimensions | Length 25–35 mm |
| Geometry | Films, Fibers, Thin Specimens |
| Control Interface | USB-connected PC with Dedicated Software |
| Sampling Rate | Up to 2000 pts/sec |
| Data Storage Modes | Linear (N cycles per T minutes) or Logarithmic (10, 100, 1000, …, 10ⁿ cycles) |
| Failure Detection | Programmable load threshold trigger with pre-failure cycle preservation (3 cycles prior to failure) |
| System Dimensions (Tester) | L100 × W100 × H500 mm (vertical orientation) |
| Controller Dimensions | L250 × W250 × H150 mm |
| Tester Mass | ~3 kg |
| Controller Mass | ~5 kg |
| Power Supply | 100 V, 10 A |
| Origin | Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | PQH-3 |
| Pricing | Upon Request |
| Max Pressure | 0–3 MPa |
| Burst Limit | 4 MPa |
| Pressurization Rate | ≤1.0 MPa/min |
| Max Assembly Height | 500 mm |
| Max Compressed Outer Diameter | 600 mm |
| Control System | Windows-based Industrial PC with Real-Time Data Acquisition & Safety Interlock Software |
| Safety Enclosure | Reinforced Sealed Chamber with Integrated Pressure Containment and Emergency Shutdown |
| Origin | Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | QT-5 |
| Pricing | Available Upon Request |
| Brand | BDC |
|---|---|
| Origin | Germany |
| Model | RDTL-0200 |
| Maximum Test Force | 5000 kN |
| Frequency Range | 80 Hz |
| Host Weight | 150 kg |
| Compliance | ASTM F2477, ISO 25539, CE/EMC Certified |
| Sample Diameter Range | 2.5–50 mm |
| Max Simulated Vessel Length | 400 mm |
| Configurable Fixture Capacity | up to 12 specimens (dependent on geometry) |
| Operating Fluid Temperature | up to 50 °C |
| Power Supply | 240 V |
| Brand | BDC |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Medical Device Testing Equipment |
| Model | VDT3600i |
| Instrument Type | Cardiovascular Implant Fatigue Tester |
| Maximum Test Pressure | 500 mmHg |
| Frequency Range | 3–50 Hz |
| Unit Weight | 160 kg |
| Key | Max Test Load: 80 kN |
|---|---|
| Frequency Range | 0–5 Hz |
| Amplitude Range | 0–160 mm |
| Static Load Accuracy | ±0.5% |
| Frequency Accuracy | ±1% |
| Stroke Resolution | 0.1% ± 0.1 mm |
| Speed Range | 0.2–200 mm/min |
| Max Spring OD | 600 mm |
| Max Spring Height | 500 mm |
| Power Supply | AC 380 V, 100 kW |
| Waveform Options | Sine, Ramp, Square |
| Compliance | GB/T 13061 |
| Brand | CIMACH |
|---|---|
| Origin | Jilin, China |
| Model | ZSDS-GZJ |
| Application | Static Strength & Fatigue Testing of High-Speed EMU Bogies |
| Compliance | TB/T 2368–2005, UIC 515-4, UIC 615-4, JIS E 4207, JIS E 4208 |
| Loading Channels | Multi-channel synchronized hydraulic actuation |
| Control Mode | Closed-loop servo-hydraulic coordination |
| Structural Test Scope | Complete bogie assembly, frame-only configuration, and modular subcomponents (axle box, pivot arm, bolster, suspension springs) |
| Origin | Jilin, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | DJW-50KN |
| Quotation | Available Upon Request |
| Static Tensile Load Range | 0–50 kN |
| Static Compressive Load Range | 0–50 kN |
| Load Accuracy | ≤ ±1% FS |
| Displacement Measurement Range (Tension) | 0.05–1000 mm |
| Displacement Measurement Range (Compression) | 0.05–500 mm |
| Deformation Measurement Range (Compression) | 0–100 mm |
| Crosshead Speed Range | 0.2–500 mm/min |
| Specimen Diameter Compatibility | 20–400 mm |
| Optional Extensometer | High-Accuracy Large-Deformation Extensometer |
| Brand | Duratt |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | D10000 High-Load Electromagnetic Dynamic Testing Machine |
| Instrument Type | High-Frequency Fatigue Testing Machine |
| Max Test Force | ±10,000 N |
| Frequency Range | 0.01–100 Hz |
| Host Weight | 950 kg |
| Max Continuous Load | ±7,000 N |
| Max Sampling Rate | 10,000 Hz |
| Max Peak Torque | 70 N·m |
| Displacement Range | ±32.5 mm |
| Max Torsional Speed | 120 rpm |
| Max Linear Velocity | 2 m/s |
| Operating Temperature | 5–30 °C |
| Vertical Test Space (No Torsion) | 805 mm |
| Vertical Test Space (With Torsion) | 735 mm |
| Horizontal Test Space | 460 mm |
| Dimensions (L×W×H) | 950×700×1800 mm |
| Displacement Sensor Resolution | 0.5 µm |
| Load Cell Resolution | ±0.2% FS |
| Power Supply | 380 V / 50 Hz / 40 A |
| Cooling | External Oil-Circulation System with Auto-Start/Stop Logic |
| Brand | Duratt |
|---|---|
| Model | D50 |
| Maximum Dynamic Force | 50 N |
| Frequency Range | 0.01–100 Hz |
| Dynamic Displacement | ±5 mm |
| Host Weight | 200 kg |
| Compliance | CE-certified electrical architecture |
| Form Factor | Benchtop, compact footprint |
| Test Modes | Tension, compression, 3-/4-point bending, torsion, frequency sweep, temperature sweep (optional) |
| Environmental Options | Saltwater bath, thermal chamber (−40 °C to +150 °C), humidity control (optional) |
| Brand | Duratt |
|---|---|
| Origin | Shanghai, China |
| Model | D200 / D500 / D1500 / D3000 |
| Max Test Force | 3000 N |
| Frequency Range | 200 Hz |
| Dynamic Displacement | ±30 mm |
| Host Weight | 200 kg |
| Compliance | CE |
| Brand | Duratt |
|---|---|
| Origin | Shanghai, China |
| Model | D8000 / D10000 / D12000 |
| Max Dynamic Force | 12000 N |
| Frequency Range | 0.01–100 Hz |
| Dynamic Displacement | ±30 mm |
| Host Weight | 200 kg |
| Compliance | CE-certified electrical design |
| Actuation | Custom high-performance linear motor with integrated ball-screw vertical positioning |
| Brand | ATSFAAR |
|---|---|
| Origin | Italy |
| Model | DE MATTIA FLEXING APPARATUS |
| Test Frequency | 300 ± 10 cycles/min |
| Maximum Deflection | 100 mm |
| Operating Temperature Range (Standard) | Ambient |
| Optional Low-Temp Version | –40 °C |
| Optional High-Temp Version | +120 °C |
| Compliance | ASTM D813 |
| Sample Preparation | Integrated notching tool included |
| Brand | TA Instruments |
|---|---|
| Origin | USA |
| Model | ElectroForce® 3200 Series |
| Frequency Range | 0.0001 – 300 Hz |
| Force Capacity Options | ±225 N or ±450 N (standard) |
| Optional Torsion Motor | 14 N·m or 25 N·m |
| Optional Linear Extension | +150 mm stroke |
| Encoder Resolution | High-resolution optical encoder (torsion mode, up to 62 revolutions) |
| Environmental Compatibility | Integrated with temperature chambers, saline baths, and bioreactors |
| Sensor Range | ±0.002 N to ±450 N (interchangeable load cells) |
| Drive Type | Direct-drive linear electromagnetic motor |
| Brand | TA Instruments |
|---|---|
| Origin | USA |
| Model | ElectroForce® 5500 |
| Frequency Range | 0.0001 – 20 Hz |
| Force Control Range | ±0.002 N to ±200 N |
| Architecture | Single-Beam Open-Frame Design |
| Environmental Compatibility | Compatible with Incubators & Gloveboxes |
| Optional Fixture | 24-Well Compression Fixture for Multi-Specimen Testing |
| Origin | Guangdong, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | FY-LLWF |
| Pricing | Available Upon Request |
| Reciprocating Stroke | 75 mm |
| Lateral Clamp Width | 25 mm |
| Longitudinal Clamp Mass | 0.28–0.34 kg |
| Center-to-Center Distance Between Clamps | 6.35 mm |
| Sample Opening Angle | 60° |
| Sample Meshing Angle | 30° |
| Counter | LCD, 0–999,999 cycles |
| Power Supply | 1-phase AC 220 V, 3 A |
| Test Speed | 30 cycles/min (constant velocity) |
| Compliance Standard | CNS 1083 |
| Brand | GuanCe Instruments |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | GCDPL-25 |
| Max Test Force | 10 kN |
| Frequency Range | a) 10 mm stroke @ 7 Hz (150 N impact force), b) 4 mm stroke @ 10 Hz (150 N impact force) |
| Host Weight | 500 kg |
| Input Voltage | AC 220 V, 50 Hz |
| Rated Power | 2 kW |
| Horizontal Travel | 1100 mm |
| Vertical Travel | 300 mm |
| Rotary Servo Motor Power | 1.5 kW |
| Load Cell Capacity | 1 kN |
| Overall Dimensions (L×W×H) | 1500 × 1000 × 1940 mm |
| Brand | GuanCe Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PMPL2000A2 |
| Price Range | USD 1,400 – 7,000 |
| Instrument Category | Specialized Fatigue Testing Machine |
| Maximum Test Force | 0–2000 N |
| Frequency Range | 0–100 cycles/min (Standard Compliance: 70 ± 5 cycles/min) |
| Unit Weight | 100 kg |
| Key | Brand: GuanCe Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PMPL-2000A |
| Max Test Force | 0–1000 N |
| Frequency Range | 10–100 cycles/min (Standard Compliance: 70 ± 5 cycles/min) |
| Host Weight | 100 kg |
| Platen Diameter | Ø250 ± 1 mm, Edge Radius: R25 ± 1 mm |
| Specimen Support Table | 500 × 500 × 10 mm, Perforated (Ø6.35 mm holes, 20 mm pitch) |
| Specimen Dimensions | 500 × 500 × (50 ± 2) mm |
| Drive System | Servo Motor |
| Control Interface | 7-inch Color Touchscreen HMI |
| Control Logic | Siemens PLC |
| Test Modes | Constant-Load Mode / Thickness-Reduction Percentage Mode |
| Max Cycles | >100,000 |
| Real-time Peak Force Display | Yes |
| End-of-Test Action | Audible Alarm + Automatic Tray Return to Zero Position |
| Power Supply | 220 VAC / 50 Hz |
| Footprint | 800 × 500 × 1200 mm (L×W×H) |
| Key | Brand: GuanCe Instruments |
|---|---|
| Origin | Beijing, China |
| Model | PMPL-2000A |
| Max Test Force | 0–1000 N |
| Frequency Range | 10–100 cycles/min (Standard Compliance: 70 ± 5 cycles/min) |
| Stroke Control Accuracy | Closed-loop servo-regulated load maintenance |
| Platen Diameter | φ250 mm ± 1 mm (Edge Radius: R25 mm ± 1 mm) |
| Specimen Support Table | 500 mm × 500 mm × 10 mm (Perforated, 6.35 mm holes on 20 mm centers) |
| Specimen Dimensions | 500 mm × 500 mm × (50 ± 2) mm |
| Display | 7-inch color TFT touchscreen with real-time peak force logging |
| Drive System | Industrial servo motor with precision motion control |
| Test Modes | Constant-load mode or constant-thickness-compression-percentage mode |
| End-of-Test Action | Audible alarm + automatic platen return to home position |
| Power Supply | 220 V AC / 50 Hz |
| Dimensions (L×W×H) | 800 × 500 × 1200 mm |
| Weight | 100 kg |
| Brand | GuanCe |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PMPL-2000A4 |
| Max Test Force | 0–1000 N |
| Frequency Range | 10–100 cycles/min (Standard Compliance: 70 ± 5 cycles/min) |
| Machine Weight | 100 kg |
| Platen Diameter | Ø250 ± 1 mm (Edge Radius: R25 ± 1 mm) |
| Specimen Support Table | 500 × 500 × 10 mm (Perforated, 6.35 mm holes on 20 mm centers) |
| Specimen Dimensions | 500 × 500 × (50 ± 2) mm |
| Drive System | Servo Motor |
| Control Interface | 7-inch Color Touchscreen HMI |
| Control Unit | Siemens PLC |
| Test Modes | Constant-Load Mode / Thickness-Reduction Percentage Mode |
| Max Cycles | >100,000 |
| End-of-Test Alert | Audible Alarm + Auto-Return to Home Position |
| Power Supply | 220 VAC / 50 Hz |
| Footprint | 800 × 500 × 1200 mm (L × W × H) |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HAIDA HD-F731-1 Chair Rotational Durability Tester |
| Frequency Range | 1–999,999 cycles (user-definable) |
| Host Weight | ~620 kg |
| Motor | 750 W servo motor ×1 + 400 W vertical reduction motor ×1 |
| Control System | PLC-based with touchscreen HMI |
| Cycle Count Range | 1–999,999 |
| Test Speed | 5–15 cycles/min |
| Rotation Angle | 0–360° (adjustable) |
| Effective Test Height | 250–700 mm |
| Max Base Diameter | ≤750 mm |
| Dimensions (L×W×H) | 1850 × 1200 × 2400 mm |
| Power Supply | 1-phase AC 220 V |
| Total Power Consumption | ~1250 W |
| Data Output | USB interface |
| Compliance Standard | BIFMA 5.1–2017 |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | HAIDA HD-F733 Office Chair Base Vertical Static Load Tester |
| Maximum Test Force | 1–30 kN |
| Crosshead Speed Range | 0.1–120 mm/min (adjustable) |
| Host Weight | ~300 kg |
| Force Resolution | 1/200,000 |
| Force Accuracy | ≤ ±0.5% FS |
| Effective Test Height | 650 mm (excluding fixtures) |
| Max Sample Diameter | 750 mm |
| Dimensions (L×W×H) | 1100 × 1100 × 1650 mm |
| Power Supply | 1-phase AC 220 V |
| Rated Power | ~850 W |
| Compliance Standards | BIFMA 5.1 Appendix C, QB/T 2280–2016 |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HAIDA HD-F733-1 Office Chair Base Vertical Load Tester |
| Max Test Force | 1–30 kN |
| Speed Range | 0.1–120 mm/min (adjustable) |
| Host Weight | ~300 kg |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HD-F735 |
| Max Test Force | 200 kg × 3 (simultaneous) |
| Frequency Range | 10–30 cycles/min |
| Stroke Control | Motorized Vertical Adjustment |
| Force Actuation | Servo-Proportional Pneumatic Valve |
| Load Sensing | Three 200 kg Load Cells |
| Test Count Range | 1–999,999 cycles (user-defined) |
| Sample Height Range | 500–750 mm |
| Test Table Width | 800 mm |
| Power Supply | AC 220 V, 5 A, 50 Hz |
| Air Supply Requirement | ≥0.6 MPa (6 bar) |
| Rated Power | 200 W |
| Dimensions (L×W×H) | 2400 × 1000 × 1950 mm |
| Compliance Standards | GB 10357.3, QB/T 2280-2007, EN 1335:2009, EN 12520:2010 / EN 1728:2012, BIFMA 5.1-2017 |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | HD-F750-1A |
| Max Test Force | 1–1300 N |
| Fatigue Frequency | 70 ± 5 cycles/min (per GB/T 18941-2003 & ISO 3385:2014) |
| Host Weight | ~80 kg |
| Max Specimen Dimensions | 380 × 380 × 150 mm (L×W×H) |
| Standard Specimen Size (GB/ISO) | 380 × 380 × 50 mm |
| ASTM Standard Specimen Size | 380 × 380 × 100 mm |
| Cycle Count Range | 1–999,999 (user-definable) |
| Indentation Speed | 100 ± 20 mm/min (per GB/T 12825-2003, ISO 2439:2008, GB/T 10807-2006) |
| Fatigue Stroke Speed | 250 ± 25 mm/min (per ASTM D3574, Test Point I3) |
| Hardness Test Stroke | 180 mm |
| Effective Force Range | 1–1300 N |
| Overall Dimensions | 600 × 500 × 1080 mm (L×W×H) |
| Power Supply | 1∮ AC 220 V |
| Rated Power | ~850 W |
| Control Interface | Touchscreen |
| Load Cell Control | Integrated PCB-based closed-loop control |
| Fixture Mounting | Magnetic coupling for rapid tool change |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-made) |
| Model | HAIDA HD-F750-6 Sponge Rolling Fatigue Tester |
| Max Test Load | 1 kN |
| Frequency Range | 1–999,999 cycles (user-definable) |
| Host Weight | ~500 kg |
| Sample Dimensions | 380 mm × 380 mm × 50 mm (L×W×H) |
| Roller Diameter | 76 ± 1.3 mm × 457 mm (L) |
| Roller Weight | ≤110 N |
| Stroke Length | 300 mm |
| Test Speed | 15 ± 1.5 cycles/min |
| Vertical Travel Speed | 15 mm/min |
| Position Resolution | 1/250,000 |
| Load Accuracy | ≤±0.5% FS |
| Drive Motor | 400 W AC Servo Motor |
| Servo Driver | 400 W Digital AC Servo Drive |
| Actuation | Electric Linear Actuator |
| Control System | PLC + 7-inch Touchscreen HMI |
| Data Output | USB Interface |
| Power Supply | 1Ø AC 220 V, 5 A, 50 Hz |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | HAIDA HD-F750A Dual-Mode Foam Indentation & Tensile Testing Machine |
| Instrument Type | Electro-Hydraulic Servo Fatigue Testing Machine |
| Maximum Test Load | 500 kg Load Cell (Spoke-Type) |
| Speed Range | 0.1–500 mm/min (Computer-Controlled Adjustable) |
| Host Weight | Approx. 150 kg |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HAIDA HD-F753 Sofa Spring & Seat Cushion Fatigue Testing Machine |
| Instrument Type | Electro-Hydraulic Servo Fatigue Testing Machine |
| Maximum Test Load | 2 kN (single load cell) |
| Cycle Count Range | 1–999,999 cycles (user-definable) |
| Host Weight | ~100 kg |
| Motor | 400 W servo motor |
| Control System | PLC-based |
| Display | Touchscreen HMI |
| Test Speed | 1–80 mm/min |
| Actuator Stroke | 250 mm |
| Stroke Accuracy | ±0.25 mm |
| Power Supply | 1-phase AC 220 V |
| Total Power Consumption | ~450 W |
| Data Output | USB interface |
| Sample Dimensions (Foam) | Max. 400 × 400 × 120 mm (L×W×H) |
| Sample Dimensions (Serpentine Spring) | Width ≤70 mm |
| Overall Dimensions | 950 × 780 × 1550 mm (L×W×H) |
| Brand | Hengyi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HY-0580(PL) |
| Max Test Force | 5 kN (static & dynamic ±5 kN) |
| Force Accuracy | ±0.5% of reading (full range, unsegmented) |
| Force Resolution | 1/30,000 (constant across full range) |
| Effective Force Range | 0.05–5 kN |
| Max Displacement | ±50 mm |
| Displacement Accuracy | ±0.5% of reading |
| Displacement Resolution | 1/30,000 |
| Function Generator Frequency Range | 0.001–100 Hz |
| Waveform Options | Sine, Triangle, Rectangle, Ramp, and User-Defined |
| System Frequency Response | 0.01–20 Hz |
| Continuous Operating Frequency | 20 Hz |
| Cycle Counter Capacity | 999,999,999 (presettable) |
| Control Modes | Force and Displacement, with seamless in-test switching |
| Effective Test Space | 800 mm |
| Column Spacing | 600 mm |
| Frame Height | 1900 mm |
| Frame Stiffness | 1.7 × 10⁸ N/mm |
| Hydraulic Power Unit | Flow 80 L/min, Pressure 25 MPa |
| Motor Speed | 1450 rpm |
| Actuator | Dual-Rod F150 mm |
| Load Cell | 5 kN (Transducer Technologies or equivalent imported brand) |
| LVDT Displacement Sensor | 100 mm range |
| Clamping System | Tensile fixture set |
| Control System | Full-digital DSP-based servo controller |
| Software | Hengyi Proprietary Fatigue Test Suite (Windows-based, GLP-compliant data logging) |
| Host Weight | 1500 kg |