- All
- Favorite
- Popular
- Most rated
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-GD-2 |
| Pricing | Upon Request |
| Illuminance Range | ≥4500 ± 500 lx (per Chinese Pharmacopoeia 2015) |
| Total Illuminance Dose | ≥1.2 × 10⁶ lx·h |
| Near-Ultraviolet Energy | ≥200 W·h/m² (per ICH Q1B) |
| Chamber Dimensions (D×W×H) | As specified per configuration (with optional light-sensitive shelf ×1) |
| Operating Power | Measured at stable 25°C setpoint |
| Ambient Operating Conditions | 5–35°C, ≤85% RH |
| Data Logging | Dual-mode — thermal printer (adjustable print interval) + real-time PC recording via RS485 |
| Remote Monitoring | TCP/IP-enabled, supports up to 30 units per host PC |
| Safety Protections | Independent chamber overtemperature cutoff, refrigeration compressor overload protection |
| Warranty | 12 months from commissioning |
| Qualification Support | IQ/OQ documentation and on-site execution available |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-1000SD-2TA |
| Pricing | Upon Request |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | SHH-2000SD-2TA |
| Pricing | Upon Request |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-3000SD-2T |
| Price Range | USD 7,000 – 11,200 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-200HWD-2 |
| Price Range | USD 1,400 – 2,800 |
| Compliance | ICH Q1A(R2), ICH Q5C, USP <1150>, FDA Guidance for Industry on Stability Testing, Chinese Pharmacopoeia (ChP) Vol. IV General Chapter 9001 |
| Temperature Range | Ambient +10°C to 70°C (operational stability at 60°C verified) |
| Uniformity | ±0.5°C (at setpoint, steady-state, per ICH Q1A) |
| Control Accuracy | ±0.3°C |
| Data Logging | Dual-channel — RS485 serial interface (Modbus RTU) + built-in thermal printer (adjustable print interval) |
| Remote Monitoring Capacity | Up to 30 units per host PC via TCP/IP or VPN |
| Safety Protections | Independent overtemperature cutoff (dual-sensor redundancy), compressor overload protection, door-open alarm |
| Power Consumption | ≤1.8 kW (measured at 60°C constant operation) |
| Ambient Requirements | 5–35°C ambient temperature, ≤85% RH |
| Dimensions (W×D×H) | 600 × 700 × 1,600 mm |
| Net Weight | 185 kg |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-GD-2F |
| Pricing | Available Upon Request |
| Compliance | ICH Q1B, USP <1191>, Chinese Pharmacopoeia 2015 Edition (Chemical Drug Stability Guidance), FDA Guidance for Industry on Photosensitivity Testing |
| Illumination Requirements | Total illuminance ≥ 1.2 × 10⁶ lux·h |
| Visible Light Intensity | 4500 ± 500 lux |
| Control Architecture | Centralized digital control with remote monitoring capability |
| Data Logging | Dual-channel — thermal printer (adjustable print interval) + real-time PC-based recording via RS485 interface |
| Safety Protections | Independent chamber overtemperature cutoff, refrigeration compressor overload protection |
| Environmental Operating Range | Ambient temperature 5–35 °C |
| Dimensions (D×W×H) | As specified per configuration (standard unit includes one photosensitive shelf) |
| Power Consumption | Measured at steady-state 25 °C operation |
| Validation Support | IQ/OQ documentation and execution services available |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-400GD-2F |
| Pricing | Available Upon Request |
| Dimensions (D×W×H) | 650 × 750 × 1850 mm |
| Illumination Uniformity | ±10% across test chamber floor |
| Light Source | UV-A + Visible LED Array (320–400 nm & 400–800 nm) |
| Total Illuminance Requirement | ≥1.2 × 10⁶ lux·hr (per ICH Q1B) |
| Near-UV Energy Dose | ≥200 W·hr/m² (320–400 nm) |
| Photometric Control Accuracy | ±500 lux (target 4500 lux per ChP 2015) |
| Operating Temperature Range | 25 ± 2 °C (ambient-controlled mode) |
| Ambient Conditions | 5–35 °C, ≤85% RH |
| Power Consumption | 2.8 kW (at 25 °C steady state) |
| Safety Protections | Independent overtemperature cutoff, compressor overload protection, door interlock |
| Data Logging | Dual-channel — real-time RS485 digital export + thermal printer (adjustable interval) |
| Remote Capability | TCP/IP-enabled |
| Compliance | ICH Q1B, USP <1191>, FDA Guidance on Photosensitivity Testing, ChP 2015 Vol. IV “Stability Testing of Chemical Drugs”, ISO/IEC 17025-aligned validation support |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-SDF |
| Price Range | USD 11,200 – 14,000 (FOB) |
| Chamber Configuration | Multi-chamber (independently controlled) |
| Temperature Range | 0°C to 60°C (±0.5°C uniformity) |
| Humidity Range | 10% to 95% RH (±3% RH uniformity, down to 20% RH at 40°C) |
| Compliance | Meets USP <1150>, ICH Q1A–Q1E, FDA 21 CFR Part 11 (with optional audit trail), and Chinese Pharmacopoeia (2020 Ed.) stability testing requirements |
| Data Recording | Built-in thermal printer (adjustable print interval), real-time temperature/humidity curve logging with ≥180-day onboard memory |
| Safety Protections | Independent chamber over-temperature cutoff, humidifier dry-run protection, compressor overload protection, SMS-based alarm system (power failure, deviation >±2°C/±5% RH) |
| Power Consumption | ≤2.8 kW per chamber (measured at 40°C / 75% RH with single refrigeration unit active) |
| Ambient Operating Conditions | 5–35°C ambient, ≤85% RH non-condensing |
| Structural Design | Stainless steel interior, double-glazed insulated doors, forced-air circulation with PID-controlled dual-loop HVAC |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-HWD-2 Series |
| Price Range | USD 1,400 – 2,800 (FOB) |
| Compliance | ICH Q1A(R2), ICH Q5C, USP <1150>, FDA Guidance for Industry on Stability Testing, Chinese Pharmacopoeia (ChP) 2020 Edition, Part IV, General Chapter 9001 |
| Temperature Range | Ambient +10°C to 70°C (standard operation up to 60°C per regulatory protocols) |
| Uniformity | ±0.5°C at setpoint (at working volume center, measured per ISO 16770:2021) |
| Stability | ±0.3°C over 24 h (load: 80% chamber volume, no door opening) |
| Control System | PID-based microprocessor controller with dual-sensor redundancy |
| Data Logging | Dual-channel — internal thermal printer (adjustable interval: 1–60 min) + PC-based real-time recording via RS-485 (Modbus RTU protocol) |
| Remote Monitoring | Web-enabled Ethernet interface (HTTP/HTTPS), supports up to 30 units per IP subnet, remote calibration verification and parameter adjustment |
| Safety Protections | Independent overtemperature cutoff (mechanical backup), compressor overload protection, door open alarm, condensate overflow sensor |
| Power Consumption | ≤1.2 kW (measured at 60°C steady state, ambient 25°C) |
| Noise Level | ≤52 dB(A) at 1 m |
| Operating Environment | 5–35°C ambient temperature, ≤85% RH non-condensing |
| Chamber Dimensions (W×D×H) | 600×600×750 mm (custom sizes available upon request) |
| Internal Volume | 270 L |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-SDT |
| Price Range | USD 11,200 – 14,000 (FOB China) |
| Chamber Independence | Fully Independent Control per Chamber |
| Temperature Range | 0°C to 60°C (±0.5°C uniformity) |
| Humidity Range | 10% to 95% RH (±3% RH accuracy) |
| Low-Humidity Capability | 20% RH @ 40°C |
| Data Recording | Integrated thermal printer with adjustable print interval |
| Compliance | Meets USP <1150>, ICH Q1A(R2), Q1B, Q5C, FDA 21 CFR Part 11 (audit trail enabled), and Chinese Pharmacopoeia 2020 Edition Vol. IV General Chapter 9001 |
| Safety Protections | Independent chamber overtemperature cutoff, humidifier dry-run protection, compressor overload protection, SMS-based alarm system for power failure and out-of-spec temperature/humidity events |
| Power Consumption | ≤2.8 kW (per chamber, measured at 40°C / 75% RH with one refrigeration unit active) |
| Ambient Operating Conditions | 5–35°C ambient temperature, ≤85% RH non-condensing |
| Structural Configuration | Modular multi-chamber architecture (standard configuration: 3–6 independently conditioned chambers |
| Data Output | Time-stamped温湿度 history curves + tabular CSV export via USB port |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-SSD Series |
| Price Range | USD 11,200 – 14,000 (FOB) |
| Chamber Independence | Fully Independent Control per Chamber |
| Temperature Range | 0°C to 60°C (±0.5°C uniformity) |
| Humidity Range | 10% to 95% RH (±3% RH accuracy) |
| Low-Humidity Capability | 20% RH @ 40°C |
| Compliance | ICH Q1A(R3), Q1B, Q5C |
| Data Recording | Integrated thermal printer with adjustable print interval (1 min–24 h) |
| Safety Systems | Independent chamber overtemperature cutoff |
| Power Consumption | ≤2.8 kW (per chamber, typical at 40°C/75% RH) |
| Ambient Operating Conditions | 5–35°C ambient, ≤85% RH non-condensing |
| Structural Design | Modular stacked chassis with removable single-layer photo-sensitive shelving (standard configuration) |
| Acoustic Performance | ≤52 dB(A) at 1 m distance |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-300GD-2 |
| Pricing | Upon Request |
| Dimensions (D×W×H) | Not Specified in Input |
| Illuminance Compliance | ≥1.2×10⁶ lux·h (total visible), ≥200 W·h/m² (near-UV) |
| Temperature Control Stability | 25°C nominal operating point |
| Environmental Operating Range | 5–35°C ambient temperature, ≤85% RH |
| Safety Protections | Independent chamber overtemperature cutoff, refrigeration compressor overload protection |
| Data Recording | Dual-mode — thermal printer (adjustable print interval) + real-time PC logging via RS485 |
| Remote Capability | Multi-unit centralized control & remote commissioning via LAN/internet (up to 30 units per host) |
| Validation Support | IQ/OQ documentation and execution services provided |
| Warranty | 12 months from acceptance, lifetime repair support |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-1000SD-2T |
| Price Range | USD 7,000 – 11,200 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SHH-400GSD |
| Temperature Range | 0–60 °C |
| Humidity Range | 10–85 %RH |
| Illumination Control | 0–10,000 lux (with UV-filtered white light source) |
| Chamber Volume | 400 L |
| Power Consumption | ≤1.8 kW (at 40 °C / 75 %RH, single compressor active) |
| Ambient Operating Conditions | 5–35 °C, ≤85 %RH |
| Compliance | Meets ICH Q1A(R2), Q5C, USP <1150>, and Chinese Pharmacopoeia 2020 Edition requirements for long-term, accelerated, and intermediate stability testing |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-2000SD-2TD |
| Price Range | USD 7,000 – 11,200 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SHH-150GSD |
| Temperature Range | 0–60 °C |
| Humidity Range | 10–95 %RH (at 25 °C) |
| Illumination Control | 0–10,000 lx (LED cold-light source, UV-filtered) |
| Chamber Volume | 150 L |
| Power Consumption | ≤1.2 kW (typical at 40 °C / 75 %RH) |
| Noise Level | ≤55 dB(A) |
| Compliance | Meets ICH Q1A(R3), Q1B, Q5C |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-200GD-2 |
| Pricing | Upon Request |
| Dimensions (D×W×H) | 600 × 750 × 1800 mm |
| Illumination Uniformity | ±10% across chamber volume |
| Light Source | UV-A + visible spectrum fluorescent lamps (320–400 nm & 400–800 nm) |
| Total Illuminance Requirement | ≥1.2 × 10⁶ lux·h (per ICH Q1B) |
| Near-UV Energy Dose | ≥200 W·h/m² (320–400 nm) |
| Photometric Control | Digital irradiance sensor with real-time feedback loop |
| Temperature Setpoint Range | 15–30°C (typical photostability test condition: 25°C ± 2°C) |
| Humidity Control | Non-controlled (open-air design per ICH Q1B) |
| Cooling System | Air-cooled hermetic compressor with over-load protection |
| Safety Protections | Independent chamber over-temperature cutoff, compressor thermal overload relay, door interlock switch |
| Data Logging | Dual-channel — RS485-modbus RTU to PC (continuous .csv export), built-in thermal printer (adjustable print interval: 1–60 min) |
| Remote Monitoring | TCP/IP Ethernet interface |
| Compliance | ICH Q1B, USP <115>, Chinese Pharmacopoeia 2015 Ed. General Chapter 9001, FDA Guidance for Industry: Photosensitivity Testing (2022), ISO/IEC 17025-aligned validation support (IQ/OQ documentation provided) |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-800SD-2TD |
| Price Range | USD 7,000 – 11,200 |
| Compliance Standards | GB/T 10586–2025, JJF 1101–2019, ICH Q1A–Q1E, USP <1150>, FDA 21 CFR Part 11 (software validation support), GMP Annex 15 (IQ/OQ documentation included) |
| Chamber Dimensions (D×W×H) | 800×900×1300 mm |
| Temperature Range | 0°C to 60°C |
| Humidity Range | 10% to 95% RH |
| Temperature Uniformity | ±0.5°C (at 25°C, 60% RH) |
| Humidity Uniformity | ±3% RH (at 25°C, 60% RH) |
| Data Logging Interval | Adjustable from 1 min to 24 h |
| Internal Memory | 64 MB cyclic storage (controller) + SD card (≥32 GB supplied) |
| Data Retention | ≥3 years at 15-min interval |
| Communication Interfaces | RS485 (Modbus RTU), USB 2.0, SD card slot, Ethernet (via optional gateway) |
| Remote Monitoring | Supported via SIMS cloud platform with TLS-secured HTTPS access |
| Power Consumption | ≤2.8 kW (typical, 40°C/75% RH operation) |
| Acoustic Noise Level | ≤58 dB(A) |
| Safety Protections | Independent overtemperature cutoff, dry-run protection for humidifier, compressor overload relay, door-access interlock, SMS alert system (GSM module optional) |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-220GSD-2TA |
| Price Range | USD 2,800 – 7,000 |
| Chamber Dimensions (D×W×H) | Not specified in input |
| Illuminated Shelf | 1 layer |
| Rated Power Consumption | Measured at 40°C / 75% RH with one compressor active |
| Ambient Operating Conditions | 5–35°C ambient temperature, ≤85% RH |
| Compliance | ICH Q1A(R3), Q1B, Q5C |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-200GD-2F |
| Pricing | Available Upon Request |
| Compliance | ICH Q1B, USP <115>, FDA Guidance for Industry (Photostability Testing), Chinese Pharmacopoeia 2015 Edition (General Chapter 9001) |
| Illuminance Control Range | 4500 ± 500 lx (for visible light exposure) |
| Chamber Dimensions (D×W×H) | 600 × 600 × 1300 mm |
| Internal Volume | 200 L (2-layer illuminated shelf configuration, with one photosensitive shelf per layer) |
| Operating Temperature | 25 °C ± 2 °C (ambient-controlled environment required: 5–35 °C, ≤85% RH) |
| Cooling System | Hermetic Compressor with Overload Protection |
| Data Logging | Dual-channel — RS485 digital output to PC + built-in thermal printer (adjustable print interval) |
| Remote Monitoring | TCP/IP-enabled Ethernet interface |
| Safety Features | Independent chamber overtemperature cutoff, compressor thermal overload protection |
| Validation Support | IQ/OQ documentation package and on-site execution services available |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Manufacturer |
| Origin Category | Domestic |
| Model | SHH-2000SD-2T |
| Price Range | USD 7,000 – 11,200 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-SSD-2STA |
| Price Range | USD 14,000 – 21,000 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-100GD-2F |
| Pricing | Upon Request |
| Dimensions (D×W×H) | Not specified in input |
| Illuminance Compliance | ≥1.2×10⁶ lux·hr (total visible), ≥200 W·hr/m² (near-UV) |
| Control Architecture | Centralized PC-based control supporting up to 30 units |
| Data Logging | Dual-mode — thermal printer (adjustable interval) + real-time digital recording via RS485 |
| Safety Protections | Independent chamber overtemperature cutoff, refrigeration compressor overload protection |
| Environmental Operating Range | 5–35°C ambient temperature, ≤85% RH |
| Warranty | 12 months from commissioning, lifetime technical support |
| Qualification Support | IQ/OQ documentation and execution services available |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-250SD |
| Pricing | Upon Request |
| Chamber Dimensions (D×W×H) | Not Specified |
| Operating Power | Measured at 40 °C / 75 % RH with Single Compressor Active |
| Ambient Operating Conditions | 5–35 °C, ≤85 % RH |
| Temperature Range | Not Explicitly Stated (ICH-Compliant Long-Term/Accelerated/Intermediate Conditions) |
| Humidity Range | 20–85 % RH (Including Low-Humidity Capability at 40 °C / 20 % RH) |
| Data Recording | Integrated Thermal Printer with Adjustable Print Interval |
| Safety Protections | Independent Over-Temperature Cut-off, Humidifier Dry-Run Protection, Compressor Overload Protection, SMS Alert System for Power Failure & Deviation Events |
| Noise Level | Ultra-Low Operational Noise |
| Energy Efficiency | Optimized Low-Power Design |
Show next