Common Laboratory Equipment
Filter
Showing 4531–4560 of 4601 results
| Brand | YUHUA (Gongyi Yuyi Instrument) |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YRE-2012 |
| Capacity | 1 L |
| Ultimate Vacuum | ≤ −0.098 MPa (≤ 3 mmHg / 399.9 Pa) |
| Rotation Speed | 5–300 rpm |
| Temperature Control Range | Ambient to 99 °C |
| Heating Accuracy | ±1 °C (not ml/min — corrected per technical standard) |
| Cooling Surface Area | 0.14 m² |
| Evaporation Rate (Water, 1 L Flask) | Up to 20 mL/min |
| Lift Stroke | 100 mm (motorized) + 115 mm (manual assist) |
| Condenser Type | Vertical triple-coil serpentine |
| Sealing | Dual-layer PTFE + fluororubber vacuum seal |
| Power Supply | AC 220 V, 50 Hz, 200 VA |
| Dimensions (W×D×H) | 620 × 430 × 680/780 mm |
| Weight | ~26 kg |
| Operating Ambient | 5–35 °C |
| Brand | A&D |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | HU2-2S-10012-A2 |
| Price | USD 7,950 (FOB Yokohama) |
| Brand | Yuntang |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | YT-ST03 |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Dimensions (W×D×H) | 200 × 200 × 260 mm |
| Weight | 4.3 kg |
| Minimum Dispense Volume | 10 µL |
| Drive Resolution | 1/60,000 steps |
| Accuracy | ±0.15% at 10 mL, ±0.2% at 20 mL |
| Resolution | 1/10,000 |
| Tubing Material | PTFE |
| Piston Material | Imported corrosion-resistant high-performance polymer |
| Fill/Empty Time | ≤30 s at 100% flow rate |
| Flow Rate | Continuously adjustable |
| Compliance Documentation | Manufacturer Authorization, User Manual, and Service Commitment Letter Provided |
| Brand | YUYANBIO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | TVHP100 |
| Price Range | USD 4,200 – 5,600 (FOB Shanghai) |
| Weight | 14.4 kg |
| Power Supply | 200–220 V AC, 50 Hz |
| Rated Power | 550 W |
| Chamber Material | ASTM A240 S30403 (304L stainless steel) |
| Touchscreen | 4.3-inch capacitive LCD with embedded microcontroller and PLC-based control logic |
| Data Integrity | Immutable on-device logging |
| Delayed Start | Programmable 1-minute safety delay |
| Remote Operation | IR remote control support with optional Wi-Fi module (firmware v2.1+) |
| Fog Generation Principle | Non-thermal ultrasonic dry fog aerosolization (particle size distribution Dv50 ≈ 7–10 µm) |
| Compatible Biocides | 7.5% w/w hydrogen peroxide aqueous solution, peracetic acid blends, and sporicidal formulations compliant with EN 14885 and EPA List K |
| Maximum Treated Volume | 10 m³ (cuboid equivalent: 2.5 m × 2.0 m × 2.0 m) |
| Optional Accessories | Portable LiFePO₄ power bank (1.2 kWh), stainless-steel mobile trolley (ISO 7 cleanroom-compatible casters), real-time H₂O₂ vapor concentration sensor (0–2000 ppm, ±5% FS), catalytic H₂O₂ decomposition unit (MnO₂/Pt-coated ceramic honeycomb) |
| Brand | Yuyi Instrument |
|---|---|
| Origin | Henan, China |
| Model | ZNCL-G |
| Stirrer Type | Magnetic Hotplate Stirrer |
| Max. Stirring Volume | 50–5000 mL |
| Speed Range | 50–2000 rpm |
| Temperature Control Range | Ambient to 250 °C |
| Temp. Accuracy | ±1 °C |
| Heating Power | 350–2000 W (model-dependent) |
| Control Method | Digital PID with Auto-Tuning, Silicon Controlled Rectifier (SCR) Output |
| Heating Surface | Anodized Aluminum with PTFE Coating |
| Motor | 40 W DC Brushless (PAPST Series) |
| Input Voltage | 220 V AC, 50 Hz (160–240 V wide-range compatible) |
| Compliance | Dual Thermocouple Input (Internal/External), Open-Couple Protection, Continuous Duty Rating |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Model | YXP |
| Pricing | Upon Request |
| Brand | YXP |
|---|---|
| Model | FL200P |
| Type | Benchtop Fully Automatic Glassware Washer |
| Construction | 304 Stainless Steel Exterior, 316L Stainless Steel Interior Chamber & Door |
| Chamber Volume | 200 L (nominal) |
| Heating Power | 3.5 kW |
| Max Cleaning Temperature | 93 °C |
| Circulation Pump Flow Rate | ≥ 450 L/min |
| Wash Solution Compatibility | Alkaline, Neutral, and Acidic Detergents (pH 2–12) |
| External Dimensions (L×W×D) | 1200 × 850 × 1850 mm |
| Dry Cycle | Integrated Hot-Air Drying with Dual 316L Steam Condensers |
| Safety | ESL Electronic Safety Lock (Auto-Pause on Door Opening), CE-compliant Electrical Architecture |
| Compliance | Designed to meet ISO 15883-1 (Washer-Disinfectors for Heat-Labile Instruments), GLP/GMP-aligned workflow documentation support |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Model | YXP |
| Pricing | Upon Request |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Manufacture | China |
| Model | HF-850Z Display Case Climate Control System |
| Price | USD 3,000 (FOB) |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HF20Q-I |
| Cooling Type | Air-Cooled |
| Refrigerant | R22 (also configurable with R407c/R134a) |
| Temperature Control Range | 18–27°C ±0.5°C |
| Humidity Control Range | 45–75% RH ±5% RH |
| Cooling Capacity | 20.1 kW |
| Heating Capacity | 9.0 kW |
| Airflow Rate | 4500 m³/h |
| External Static Pressure | ≥300 Pa |
| Compressor | Imported High-Efficiency Scroll Compressor |
| Humidification | Electrode Steam Humidifier |
| Dehumidification | Continuous Condensation-Based System |
| Fan Type | Low-Noise Centrifugal Fan |
| Power Supply | 3N～50 Hz / 380 V |
| Noise Level | 64 dB(A) |
| Dimensions (L×W×H) | 1300 × 740 × 1730 mm |
| Unit Weight | 233 kg |
| Control System | CAREL PCC32 Intelligent Programmable Microcontroller |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | XD-10 / XD-20 |
| 雾化粒径 | 1–5 µm |
| Aerosol Capacity | High-output vaporized H₂O₂ generation |
| Humidity Monitoring | Real-time ambient RH sensing |
| Coverage | Multi-room, complex-layout environments |
| Power Supply | Standard AC input (no water line required) |
| Operation Mode | Mobile, timer-programmable,定点定量 disinfection |
| Particulate Removal Efficiency | ≥99.5% for particles ≥0.1 µm |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZD-558LB Laboratory Dehumidifier |
| Instrument Type | Compressor-Based Dehumidifier |
| Application Scope | Laboratory & Precision Equipment Environment Control |
| Dimensions (L×W×H) | 370 × 250 × 580 mm |
| Operating Temperature Range | 5–38 °C |
| Recommended Coverage Area | 50–120 m² |
| Air Circulation Rate | 850 m³/h |
| Dehumidification Capacity | 58 L/day |
| Power Input | 670 W |
| Power Supply | 220 V~50 Hz |
| Water Tank Capacity | 6 L |
| Drainage Options | Removable Tank or Continuous Drainage via Hose |
| Net Weight | 20 kg |
| Compressor Type | High-Efficiency Rotary Compressor |
| Filtration System | Activated Carbon Filter |
| Control System | Microcomputer-Based Humidity Setpoint Control with LCD Display |
| Safety Protections | Three-Minute Compressor Delay, High/Low Pressure Protection, Overload & Undervoltage Protection |
| Sensor | High-Accuracy Japanese Shinko Hygrothermic Sensor |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-made) |
| Model | ZD-8240C |
| Type | Compressor-based Industrial Dehumidifier |
| Dehumidification Capacity | 240 L/day |
| Power Input | 4900 W |
| Voltage/Frequency | 380 V~50 Hz |
| Operating Temperature Range | 5–38 °C |
| Noise Level | 52 dB(A) |
| Dimensions (W×D×H) | 770 × 470 × 1650 mm |
| Net Weight | 160 kg |
| Drainage Method | Continuous via PVC hose |
| Control System | Microprocessor-based with high-precision Japanese SHINYO humidity sensor |
| Safety Protections | High/low pressure cut-off, overload, undervoltage, reverse-phase protection |
| Filtration | Standard activated carbon filter |
| Airflow Design | Dual-centrifugal impeller, external rotor industrial fan |
| Heat Exchanger | Enhanced finned-tube copper coil with hydrophilic aluminum fins |
| Compressor | International-brand scroll compressor |
| Refrigerant | Eco-friendly R-410A |
| Application Area | 180–240 m² (at 2.6–2.8 m ceiling height, sealed environment) |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZD-8240C |
| Type | Compressor-Based Industrial Dehumidifier |
| Dehumidification Capacity | 240 L/day |
| Power Supply | 380 V AC, 50 Hz |
| Input Power | 4900 W |
| Operating Temperature Range | 5–38 °C |
| Noise Level | 52 dB(A) |
| Dimensions (W×D×H) | 770 × 470 × 1650 mm |
| Net Weight | 160 kg |
| Applicable Area | 180–240 m² |
| Control Method | Intelligent Humidity Setpoint Control |
| Drainage | Continuous via PVC Hose |
| Safety Protections | High/Low Pressure, Overload, Undervoltage, Reverse Phase, 3-Minute Compressor Delay Start |
| Sensor | Japanese Shinko High-Accuracy Hygrothermograph |
| Filtration | Standard Activated Carbon Filter |
| Fan System | Dual-Centrifugal External Rotor Blower |
| Heat Exchanger | Enhanced Finned-Tube with Internal Grooved Copper Tubes |
| Refrigerant | Eco-Friendly R410A |
| Compliance | CE-marked design principles |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZD-8240G |
| Instrument Type | Compressor-Based Dehumidifier |
| Application Type | Industrial Dehumidifier |
| Dimensions (L×W×H) | 770×470×1650 mm |
| Operating Ambient Temperature Range | 5–55°C |
| Maximum Inlet Air Temperature | ~55°C |
| Suitable Area | 180–240 m² |
| Airflow Rate | 3000 m³/h |
| Dehumidification Capacity | 240 L/day |
| Power Input | 4900 W |
| Noise Level | 52 dB(A) |
| Humidity Setpoint Range | 10–90% RH |
| Control Method | Microprocessor-Based Humidity Intelligent Control |
| Drainage | Continuous via PVC Hose |
| Filter | Standard Activated Carbon Filter |
| Compressor Type | High-Temperature Scroll Compressor (Copeland/ZP series equivalent) |
| Protection Features | 3-Minute Compressor Delay Start, High/Low Pressure Protection, Phase Sequence Protection, Overload Protection, Real-Time Fault Detection |
| Weight | 160 kg |
| Customization Options | Ducted & Ceiling-Mounted Configurations Available |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZD-8480C |
| Dehumidification Capacity | 480 L/day (20 kg/h) |
| Control Method | Intelligent Humidity Setpoint Control |
| Suitable Area | 360–480 m² |
| Operating Temperature Range | 5–38 °C |
| Power Supply | 380 V AC, 50 Hz |
| Input Power | 9.9 kW |
| Air Circulation Rate | 6000 m³/h |
| Noise Level | 55 dB(A) |
| Drainage | Continuous via PVC hose |
| Unit Weight | 300 kg |
| Dimensions (W×D×H) | 1240 × 460 × 1750 mm |
| Compressor Configuration | Dual Hermetic Scroll Compressors |
| Filtration | Standard Activated Carbon Filter |
| Safety Protections | High/Low Pressure, Overload, Undervoltage, Reverse Phase, 3-Minute Compressor Delay Start |
| Control System | Microcomputer Controller with Japanese SHINYO High-Accuracy Hygrothermometer Sensor |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZS-40Z High-Humidity-Resistant Ultrasonic Humidifier |
| Instrument Type | Ultrasonic Humidifier |
| Humidification Capacity | 12 kg/h |
| Suitable Area | 300–500 m² |
| Construction | Full Stainless Steel Enclosure |
| 雾化单元 | Integrated Ultrasonic Atomizer with Alkaline/Acid-Resistant Ceramic Transducer |
| Power Supply | IP68-Rated Waterproof Power Module |
| Fan System | Bearing-Type Waterproof Fan |
| Humidity Sensor | High-Precision Capacitive RH Sensor |
| Control Modes | On/Off, Timer-Based, and Closed-Loop Humidity Feedback (±3% RH accuracy) |
| Power Consumption | 1200 W |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZS-40Z |
| Humidification Capacity | 12 kg/h |
| Power Consumption | 1200 W |
| Control Mode | Precision Humidity Feedback Control (with Japanese Shinyo High-Accuracy RH Sensor) |
| 雾化方� | �: Ultrasonic Atomization (Ceramic Transducer) |
| Enclosure Material | Full Stainless Steel (AISI 304) |
| IP Rating | IP68 Waterproof Power Supply & Fan |
| Operating Voltage | 36 V DC (Fan), 220 V AC (Unit) |
| Certifications | CE-marked for industrial indoor use |
| Compliance | Designed to support ISO 12647-2 (Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 2: Offset lithographic processes) environmental stability requirements |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic (China-made) |
| Model | ZS-40Z |
| Power Consumption | 1200 W |
| Humidification Capacity | 12 kg/h |
| Control Mode | Humidity-sensing Automatic Control (with Japanese Shinyo High-Accuracy RH Sensor) |
| 雾化方� | �: Ultrasonic Oscillation (2.4 MHz) |
| Enclosure Material | Full Stainless Steel (304) with Powder Coating |
| IP Rating | IP68 (Waterproof Power Supply & Fan) |
| 雾化片 | Alumina Ceramic Transducer (Alkaline/Acid-Resistant, 3000–5000 h Lifetime) |
| Mobility | Equipped with Locking Casters |
| Compliance | Designed for ISO 14644 Cleanroom-adjacent environments and GLP-aligned humidity stability requirements |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZS-40Z Industrial Humidifier for Printing Facilities |
| Instrument Type | Ultrasonic Humidifier |
| Humidification Capacity | 12 kg/h |
| Coverage Area | 100–200 m² |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZS-40Z |
| Instrument Type | Ultrasonic Humidifier |
| Humidification Capacity | 12 kg/h |
| Coverage Area | 300–500 m² |
| Enclosure Material | Full Stainless Steel |
| 雾化片 | Alkaline/Acid-Resistant Ceramic Transducer |
| Power Supply | IP68-Rated Variable-Frequency Driver |
| Fan | Sealed Bearing Waterproof Fan |
| Humidity Sensor | High-Accuracy Capacitive RH Sensor |
| Control Mode | Integrated Humidity Feedback Loop |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | ZS-40Z |
| Humidification Capacity | 12 kg/h |
| Power Consumption | 1200 W |
| Control Mode | Automatic Humidity Control (RH Feedback) |
| 雾化方� | �: Ultrasonic Atomization |
| Enclosure Material | Full Stainless Steel (304) |
| IP Rating | IP68 (Power Supply & Fan) |
| 雾化片 | Acid- and Alkali-Resistant Ceramic Transducer (3000–5000 hr lifespan) |
| Sensor | High-Accuracy Japanese Shinyo Humidity Sensor (±3% RH) |
| Certifications | CE-marked, RoHS-compliant, GLP-supporting firmware architecture |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZS-60Z Industrial Humidifier |
| Instrument Type | Ultrasonic Humidifier |
| Humidification Capacity | 18 kg/h |
| Suitable Area | 300–400 m² |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZS-80Z |
| Instrument Type | Ultrasonic Humidifier |
| Humidification Capacity | 24 kg/h |
| Coverage Area | 250–300 m² |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZS-80Z |
| Application | Textile Workshop Humidity Control |
| Technology | High-Frequency Ultrasonic Atomization |
| Construction | Full Stainless Steel Enclosure (304 SS) |
| Power Supply | IP68-Rated Sealed Variable-Frequency Power Module |
| Atomizer Core | Integrated Ceramic Ultrasonic Transducer (Alkali/Acid Resistant, 3000–5000 hr service life) |
| Fan System | IP68-Rated 36V Ball-Bearing Waterproof Blower |
| Control System | Microprocessor-Based Controller with Soken (Japan) High-Accuracy Hygrometer (±2% RH, 10–95% RH range) |
| Mobility | Four Swivel Casters with Locks |
| Safety Features | Auto Water-Level Detection, Overflow Protection, Dry-Run Prevention |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | ZY-1800 |
| Application | Public Restroom Air Quality Management |
| Construction | Stainless Steel Enclosure with Powder-Coated Finish |
| 雾化粒径 | <10 µm |
| Water Tank Capacity | 5.5 L |
| Control Interval | 1 sec – 99 min 59 sec (programmable) |
| 雾化方� | �: Ultrasonic Nebulization |
| Fluid Compatibility | Neutral Odor-Neutralizing Concentrate, EPA-Registered Disinfectant Solutions, Potable Water |
| Tubing Interface | Ø75 mm PVC |
| Max Distribution Distance | 8 m |
| Safety Feature | Auto Dry-Run Protection |
| Brand | ZEEDO |
|---|---|
| Model | HS-CC01 |
| Construction | 0.8 mm cold-rolled steel (Baosteel) |
| Finish | Electrostatic powder coating with anti-rust pretreatment |
| Drawer System | 4 modular units × 5 full-extension drawers = 20 drawers total |
| Capacity | ~16,000 paraffin blocks (standard 30 × 25 × 5 mm) |
| Drawer Guidance | Heavy-duty槽-type roller track system with dual-position high-strength nylon rollers |
| Safety Features | Auto-return drawer mechanism, integrated high-elasticity shock-absorbing pads at drawer front edge |
| Dimensions (W × D × H) | 480 × 515 × 1510 mm per unit |
| Origin | Beijing, China |
| Compliance | Designed for GLP-compliant histopathology laboratories |
| Brand | Zehntner |
|---|---|
| Origin | Switzerland |
| Model | ZUA 2000 |
| Wet Film Thickness Range | 0–3000 µm |
| Adjustable Increment | 5 µm |
| Available Wet Film Widths | 60 mm, 80 mm, 100 mm, 150 mm |
| Body Material | Anodized Aluminum Alloy (Acid- and Alkali-Resistant) |
| Disassembly | Fully Serviceable for Solvent Cleaning |
| Compliance | Designed to Support ASTM D823, ISO 2808, and ISO 15184 Test Protocols |
| Brand | Zelab |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | Center-EDI |
| Purified Water Grade | ASTM Type I |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | <0.01 ppb |
| Total Organic Carbon (TOC) | <3 ppb |
| Microbial Count | <0.001 CFU/mL |
| Endotoxins | <0.001 EU/mL |
| Particles (>0.1 µm) | <1 particle/mL |
| Brand | Zelab |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Center60 |
| Pure Water Grade | Type I (ASTM D1193-20) |
| Resistivity | >10 MΩ·cm at 25°C |
| Heavy Metals & Soluble Silica | <0.01 ppb |
| Total Organic Carbon (TOC) | <3 ppb |
| Microbial Count / Endotoxins | <0.001 EU/mL |
| Particles (>0.1 µm) | <1 particle/mL |
| Production Capacity | 60 L/h (DI water) |
| RO Recovery Rate | ≥95% |
| Input Water Requirement | TDS <200 ppm, 5–45°C, 1.0–4.0 kgf/cm² |
| Power Supply | AC 220 V ±10%, 50 Hz, 240 W |
| Dimensions (L×W×H) | 57×60×150 cm |
| Weight | ~70 kg |