Common Laboratory Equipment
Filter
Showing 61–90 of 17424 results
| Brand | ABSOLUTE OZONE |
|---|---|
| Origin | Canada |
| Model | Atlas100 |
| Ozone Output | 100 g/h (5.3 ppm·day) |
| Max Ozone Output | 113 g/h (6 ppm·day) |
| Ozone Concentration | 5–12% w/w |
| Feed Gas Flow Rate | 0.1–25 SLPM |
| Operating Pressure | 25–100 psig (standard setpoint: 25 psig) |
| Power Supply | 120 V ±10%, 50/60 Hz, single-phase, 15.0 A |
| Max Power Consumption | 950 W |
| Inlet/Outlet Fitting | 0.25-inch stainless steel compression fittings |
| Construction | Brushed stainless steel and aluminum housing |
| O₃/O₂ Conduit Materials | PTFE-lined 304 stainless steel and brass |
| Pressure Test Rating | 150 psig leak-tested |
| Brand | ABSOLUTE OZONE |
|---|---|
| Origin | Canada |
| Model | Magnum160 |
| Ozone Output | 160 g/h (8.5 ppm·dm³/min) |
| Max Ozone Output | 180 g/h (9.5 ppm·dm³/min) |
| Operating Pressure | 40 psig (adjustable 30–100 psig) |
| O₃ Concentration | 5–12% w/w |
| Gas Flow Rate | 0.1–50 SLPM |
| Power Supply | 208–230 V AC ±10%, 50/60 Hz, 3-phase, 8.0 A |
| Max Power Consumption | 1600 W |
| Inlet/Outlet Fittings | 3/8" stainless steel |
| Construction | Brushed stainless steel & aluminum housing |
| Pressure Test | 150 psig leak-tested |
| Dimensions (H×W×D) | 14 × 26.5 × 7 in |
| Net Weight | 53 lbs |
| Shipping Weight | 58 lbs |
| Shipping Dimensions | 30 × 18 × 11 in |
| Brand | Absolute Ozone |
|---|---|
| Origin | Canada |
| Model | Atlas80 |
| Ozone Output | 80 g/h (4.5 ppd) |
| Max Ozone Output | 95 g/h (5 ppd) |
| Ozone Concentration | 5–12% w/w |
| Operating Pressure | 25 psig (adjustable 20–100 psig) |
| Gas Flow Rate | 0.1–20 SLPM |
| Input Power | 120 V ~ ±10%, 50/60 Hz, 9.0 A (single-phase) or 220 V ~ ±10%, 50/60 Hz, 7.0 A (single-phase) |
| Max Power Consumption | 650 W |
| Inlet/Outlet Fitting | 0.25-inch stainless steel compression fittings |
| Construction Materials | Brushed stainless steel and aluminum housing |
| Brand | Absolute Ozone |
|---|---|
| Origin | Canada |
| Model | Magnum200 |
| Ozone Output | 200 g/h (10.6 ppd) |
| Max Ozone Output | 230 g/h (12.2 ppd) |
| Ozone Concentration | 5–12% w/w |
| Operating Pressure | 40 psig (adjustable 30–100 psig) |
| Gas Flow Rate | 0.1–50 slpm |
| Power Supply | 208–230 V AC, ±10%, 50/60 Hz, 3-phase, 10.0 A |
| Max Power Consumption | 1700 W |
| Inlet/Outlet Fitting | 3/8" stainless steel |
| Construction | Brushed stainless steel and aluminum housing |
| Pressure Test | 150 psig leak-tested |
| O₃/O₂ Tubing | PTFE-lined 304 stainless steel and brass |
| Dimensions (H×W×D) | 24 × 16 × 7 in |
| Unit Weight | 51 lbs |
| Shipping Weight | 56 lbs |
| Shipping Dimensions | 26 × 20 × 10 in |
| Brand | Absolute Ozone |
|---|---|
| Origin | Canada |
| Model | NANO |
| Ozone Output | 15 g/h (up to 20 g/h) |
| O₃ Concentration | 5–10% by weight |
| Oxygen Flow Rate | 0.1–4 SLPM |
| Operating Pressure | 20 psig |
| Power Input | 120 V ±10% / 220 V ±10%, 50/60 Hz, single-phase |
| Power Consumption | 150–200 W |
| O₂ Inlet & O₃ Outlet | 1/4″ fittings |
| Construction | Brushed stainless steel/aluminum housing |
| Pressure Test | 120 psig leak-tested |
| Dimensions | 5″ × 5″ × 14″ (W × D × H) |
| Weight | 5.8 kg |
| Compliance | CSA-certified (optional) |
| Brand | ACCRETECH |
|---|---|
| Origin | Japan |
| Model | DM43801 |
| Type | Imported CMM Probe Styli |
| Distributor Status | Authorized General Distributor |
| Pricing | Available Upon Request |
| Brand | ACCRETECH (Tokyo Seimitsu) |
|---|---|
| Origin | Japan |
| Model | DM43801 |
| Type | Standard CMM Probe Styli |
| Compliance | ISO 10360-5, VDI/VDE 2617 Part 5 |
| Mounting Interface | M3 thread (standard for most tactile CMM probe heads) |
| Ball Material | Ruby (Al₂O₃) |
| Stem Material | Stainless Steel or Carbon Fiber (configurable) |
| Total Length Definition | From rear mounting face to center of stylus ball |
| Effective Working Length (EWL) | Distance from stylus ball center to first interference point along surface normal direction |
| Brand | Accroma |
|---|---|
| Origin | Switzerland |
| Model | Accroma |
| Extraction Type | Liquid-Liquid Extraction |
| Temperature Range | −20 °C to 40 °C |
| Dimensions | 144 × 113 × 200 cm |
| Sample Capacity | 124 positions |
| Compliance | Designed for GLP/GMP-aligned workflows, supports 21 CFR Part 11–compliant audit trails |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Color Options | Deep Blue / Magenta / Green / Royal Blue |
| Price Range | USD 195–580 |
| Instrument Type | Single-Channel Electronic Pipette Aid |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ATS1026 |
| Pricing | Available Upon Request |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ATS1032 |
| Price | Upon Request |
| Height | 23 in (57.5 cm) |
| Diameter | 19.5 in (49 cm) |
| Width | 18 in (45 cm) |
| Weight | 20 lb (9 kg) |
| Inlet OD | 5 in (12.5 cm) |
| Outlet OD | 6 in (15 cm) |
| Operating Temperature | up to 250°F (121°C) |
| Collection Efficiency | 90–95% for 120-mesh Al₂O₃ |
| Recommended Airflow | 250–350 CFM |
| Drum Dimensions | Ø19 in × 18 in (Ø47.5 cm × 45 cm) |
| Finish | Powder-Coated Steel |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | ATS1041 |
| Pricing | Available Upon Request |
| Dimensions | 21.5" W × 20" L × 18" H (54.6 cm × 50.8 cm × 45.7 cm) |
| Weight | 30 lbs (13.6 kg) |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ATS2017 |
| Price | Upon Request |
| Cyclone Height | 14 in (35 cm) |
| Cyclone Diameter | 8 in (20 cm) |
| Cyclone Weight | 4 lb (1.8 kg) |
| Inlet/Outlet OD | 2 in (5 cm) |
| Filtration Efficiency | 95–99% (at 250–350 CFM) |
| Collection Vessel Diameter | 15 in (37.5 cm) |
| Collection Vessel Height | 18 in (45 cm) |
| Collection Vessel Weight | 8 lb (3.6 kg) |
| Max Operating Temperature | 250 °F (121 °C) |
| Particle Capture Threshold | ≥325 mesh (≤44 µm) |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DCU1 |
| Instrument Type | Filter-Based Air Purifier |
| Dimensions (W×D×H) | 14 in × 13 in × 18 in |
| Fan Performance | 210 CFM @ 19 in H₂O static pressure |
| Noise Level | ≤59 dB(A) at medium speed |
| Power Supply | 120/240 VAC, 50/60 Hz, 12 A (120 V) or 8 A (240 V) |
| Filter Configuration | Polyester pre-filter + 99% efficient @ 1.0 µm main filter |
| Enclosure | Powder-coated steel with acoustic damping structure |
| Weight | 44 lbs |
| Standard Accessories | 2" OD inlet duct, 5-ft dual-wall smooth-bore rubber hose with clamps, swivel casters, 7.5-ft power cord, remote 24 VDC start interface, operation manual |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Model | ECU1 |
| Instrument Type | Filter-Based Air Purification System |
| Dimensions (W×D×H) | 23 in × 23 in × 35.5 in |
| Fan Performance | 210 CFM @ 19" w.c. |
| Noise Level | 59 dBA (at full speed) |
| Power Input | 120/240 V AC, 50/60 Hz, 15 A (120 V) or 8 A (240 V) |
| Pre-Filter Efficiency | 99% @ 1 µm |
| HEPA Filter Efficiency | 99.97% @ 0.3 µm |
| Activated Carbon Capacity | Two 30-lb modules |
| VOC Sensor | Calibrated electronic sensor with real-time display feedback |
| Remote Control Interface | 24 V DC start/stop |
| Weight (incl. filters) | 210 lbs |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | ECU2 |
| Instrument Type | Filter-Based Air Purification System |
| Dimensions (W×D×H) | 24 in × 35 in × 52 in |
| Fan Capacity | 750 CFM |
| Noise Level | 60 dBA |
| Power Supply | 220 V AC, 3-Phase, 50/60 Hz, 1100 W per Phase |
| Remote Control Interface | 24 V DC Start/Stop |
| Filter Configuration | Pre-filter (99% @ 1 µm), HEPA Filter (99.97% @ 0.3 µm), Dual Activated Carbon Modules (40 lbs each) |
| VOC Sensor Calibration | Ethanol at 600 ppm |
| Weight (Net) | 490 lbs |
| Weight (Shipping) | 590 lbs |
| Mobility | Industrial Swivel Casters (2 with Lock) |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Model | FTBLL12 |
| Power Supply | 220–240 VAC, 50/60 Hz, 20 A |
| Max Heating Capacity | 6800 W |
| Operating Temperature Range | Ambient to 600 °C (1112 °F) |
| Fluidization Air Requirement | Clean, dry air at 50 PSI, up to 8.0 CFM |
| Safety Cut-off | Independent overtemperature protection at 615 °C (1140 °F) |
| Control System | Quad-zone PID temperature controller with RS485 interface |
| Chamber Dimensions | Ø312 mm × 660 mm (12.3″ × 26″) |
| Compliance | CE-certified |
| Included | Al₂O₃ fluidization medium, operator manual |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | FTBLL12W |
| Pricing | Available Upon Request |
| [Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Model | FTBLL26 |
| Power Supply | 220–240 VAC, 50/60 Hz, 30 A |
| Max Heating Capacity | 6800 W |
| Operating Temperature Range | Ambient to 1140 °F (615 °C) |
| Fluidization Air Requirement | Clean, dry air at 50 PSI, up to 8.0 CFM |
| Safety | Dual-fuse protection, independent overtemperature cutoff at 1140 °F, CE certified |
| Control System | Four-zone PID temperature controller with RS485 PC interface |
| Air Flow Control | Fully automated 4-stage fluidization air regulation |
| Internal Chamber Dimensions | Up to 12.3 in (312 mm) diameter × 26 in (660 mm) depth |
| Included | Alumina fluidization medium, operator manual] |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Model | FTBLL27 |
| Power Rating | 18 kW |
| Operating Temperature Range | Up to 610 °C |
| Fluidization Air Pressure | 70 PSI (4.8 bar) |
| Air Flow Rate | 15 CFM (425 L/min) |
| Electrical Supply | 480 V / 380 V AC, 50/60 Hz, 3-phase, Star Connection |
| Basket Diameter | 15.8 in (401 mm) |
| Basket Depth | 47 in (1194 mm) |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | FTBLL47 |
| Pricing | Upon Request |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Model | FTBSL15 |
| Heating Power | 4000 W |
| Chamber Dimensions | 7.3 in (185 mm) dia × 15 in (381 mm) depth |
| Operating Temperature Range | Ambient to 650 °C |
| Temperature Uniformity | ±0.5 °C across working zone |
| Stability | ±0.2 °C at setpoint |
| Air Supply Requirement | Clean, dry air at 50 PSI, max 3.5 CFM |
| Electrical Input | 240 VAC, 50/60 Hz, 20 A |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Model | FTBSL25 |
| Heating Power | 6000 W |
| Working Chamber Dimensions | 7.3 in (185 mm) diameter × 15 in (381 mm) height × 25 in (635 mm) depth |
| Temperature Range | Ambient to 700 °C (typical operational limit for aluminum oxide media) |
| Stability | ±0.5 °C over full chamber volume at steady state |
| Uniformity | ±1.5 °C across working zone |
| Air Supply Requirement | Clean, dry air at 50 PSI, max. 3.5 CFM |
| Electrical Input | 240 VAC, 50/60 Hz, 30 A |
| Brand | Accurate Thermal Systems |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | FTBSL6 |
| Pricing | Available Upon Request |
| Brand | Accurion |
|---|---|
| Origin | Germany |
| Model | AE600 |
| Instrument Type | Atomic Force Microscope (AFM) Soundproof Enclosure |
| Internal Dimensions | 600 × 600 × 800 mm |
| Mass | 70 kg |
| Fire Retardancy | < 100 mm/min (EN 13501-1, Class B-s1,d0) |
| Brand | Accurion |
|---|---|
| Origin | Germany |
| Model | i4 |
| Dimensions | 400 × 500 × 90 mm |
| Payload Capacity | 0–120 kg |
| Active Isolation Bandwidth | 0.6/1 Hz to 200 Hz |
| Degrees of Freedom | 6-DOF |
| Settling Time | ≤ 0.3 s |
| Power Supply | Standard AC Mains (No Compressed Air Required) |
| Inherent Stiffness at 1 Hz | 20–30× Higher Than Typical Passive Isolation Tables |
| Brand | Accurion |
|---|---|
| Origin | Germany |
| Model | i4 Large |
| Dimensions | 550 × 700 × 92 mm |
| Payload Capacity | 0–105 kg or 40–150 kg (dual-range configuration) |
| Active Isolation Bandwidth | 0.6/1 Hz – 200 Hz |
| Degrees of Freedom | 6-DOF (all axes actively controlled) |
| Settling Time | ≤ 0.3 s |
| Power Supply | Standard AC mains (no compressed air required) |
| Inherent Stiffness at 1 Hz | 20–30× higher than typical passive pneumatic tables |
| Brand | Accurion |
|---|---|
| Origin | Germany |
| Model | i4 Medium |
| Dimensions | 600 × 600 × 90 mm |
| Load Capacity | 0–105 kg or 40–150 kg (dual-range configuration) |
| Active Isolation Bandwidth | up to 200 Hz |
| Settling Time | ≤ 0.3 s |
| Degrees of Freedom | 6-DOF (all axes actively controlled) |
| Power Supply | Standard AC mains (no compressed air required) |
| Inherent Stiffness at 1 Hz | 20–30× higher than typical pneumatic passive tables |
| Brand | Accurion |
|---|---|
| Origin | Germany |
| Model | Nano20 |
| Dimensions | 204 × 204 × 69 mm |
| Payload Capacity | 0–8 kg |
| Active Isolation Bandwidth | 0.6/1 Hz to 200 Hz |
| Degrees of Freedom | 6-DOF |
| Settling Time | ≤ 0.3 s |
| Power Supply | Standard AC Mains |
| Compressed Air Required | No |
| Brand | Accurion |
|---|---|
| Origin | Germany |
| Model | Nano30 |
| Dimensions | 300 × 400 × 75 mm |
| Payload Capacity | 5–25 kg (standard) or 10–30 kg (high-load variant) |
| Active Isolation Bandwidth | 0.6/1 Hz – 200 Hz |
| Degrees of Freedom | 6-DOF (all axes actively controlled) |
| Settling Time | ≤ 0.3 s |
| Power Supply | Standard AC mains (no compressed air required) |
| Inherent Stiffness at 1 Hz | 20–30× higher than typical passive pneumatic tables |