Common Laboratory Equipment
Filter
Showing 751–780 of 17598 results
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-80LG |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) |
| Output Flow Rate | 80 L/min |
| Output Pressure Range | 0–0.4 MPa |
| Nitrogen Purity | 99.9% |
| Dew Point | −40 °C |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | AYAN-AUTOM-12G |
| Heating Method | Dry-Block Heating |
| Temperature Range | Ambient to 100 °C |
| Temperature Uniformity | ±1 °C |
| Sample Capacity | 12 positions |
| Gas Flow Control Range | 0–999 mL/min |
| Heating Power | 300 W (typical for dry-block configuration) |
| Tube Compatibility | Accepts 10–29 mm OD round-bottom tubes (standard 12 × 16 mm or 12 × 18 mm formats) |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | AYAN-AUTOM-12S |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 100 °C |
| Temperature Uniformity | ±0.5 °C |
| Sample Vessel Capacity | 50 / 100 / 150 / 200 mL |
| Gas Flow Control | 0–999 mL/min (digital regulation) |
| Sample Positions | 12 |
| Heating Power | 1.2 kW (typical for dual-zone water bath) |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-AUTOM-12S |
| Heating Method | Water Bath |
| Temperature Range | 0–100 °C |
| Temperature Uniformity | ±1 °C |
| Sample Capacity | 12 positions |
| Vial Size Compatibility | 50–200 mL |
| Gas Flow Control Range | 0–999 mL/min (adjustable per channel) |
| Precise Endpoint Detection | Optical sensor-based volumetric termination (0.5 / 1 / 2 mL or near-dry) |
| Origin | Zhejiang, China |
|---|---|
| Manufacturer Type | Distributor |
| Product Origin | Domestic (China) |
| Model | AYAN-AUTOM-12S |
| Price | USD 3,950 (FOB) |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 100 °C |
| Temperature Stability | ±0.5 °C |
| Sample Capacity | 12 positions |
| Vial Compatibility | 50–200 mL (adjustable), standard 16–20 mm OD |
| Gas Flow Control | 0–0.8 MPa, 12-channel independent electromagnetic valve regulation |
| Optical Endpoint Detection | Adjustable setpoints at near-dry, 0.5 mL, 1 mL, or 2 mL |
| Timing Range | 0–999 min |
| Auto-refill Function | Yes |
| Dual-seal Hydraulic Door System | Yes |
| Integrated Exhaust Fan with Activated Carbon Filter | Yes |
| Pre-heated Nitrogen Delivery (≈45 °C) | Yes |
| Power Supply | 220 V, 50 Hz |
| Brand | Anyan (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-B100 |
| Evaporator Internal Diameter | 100 mm |
| Evaporation Area | 0.15 m² |
| Condensation Area | 0.25 m² |
| Feed Volume | 2 L |
| Processing Flow Rate | 0.5–5.0 L/h |
| Motor Power | 120 W |
| Max Rotational Speed | ≤450 rpm |
| Light Fraction Collection Bottle | 2 L |
| Heavy Fraction Collection Bottle | 2 L |
| Cold Trap | Integrated |
| External Condenser | Equipped |
| Cooling System | Built-in |
| Ultimate Vacuum | <100 Pa |
| Heating Temperature Range | Ambient to 200 °C |
| 刮板材质 | PTFE (standard), optional carbon fiber for >150 °C operation |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-B100 |
| Feed Rate | 0.5–5.0 L/h |
| Effective Evaporation Area | 0.1 m² |
| Evaporator Internal Diameter | 100 mm |
| Condensation Area | 0.25 m² |
| Collection Vessels | 2 (light & heavy fractions) |
| Ultimate Vacuum | <0.1 Pa |
| Heating Temperature Range | Ambient to 200 °C |
| Motor Power | 120 W |
| Max Rotational Speed | ≤450 rpm |
| Film Thickness | <0.5 mm |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Model | AYAN-B100 |
| Feed Capacity | 2 L |
| Effective Evaporation Area | 0.16 m² |
| Evaporator Internal Diameter | 100 mm |
| Condensation Area | 0.25 m² |
| Collection Vessels | 2 units |
| Operating Vacuum | ≤5 mmHg (≤667 Pa) |
| Film Thickness | <0.5 mm |
| Heating Temperature Range | Ambient to 300 °C |
| Cooling Temperature | −20 °C |
| Motor Power | 240 W |
| Rotational Speed | 300 rpm |
| 刮板材质 | PTFE + SS316L |
| Sealing | Silicone gaskets (optional PTFE) |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-B150 |
| Price | USD 21,000 (FOB Zhejiang) |
| Brand | Anyan (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-B200 |
| Price | USD 28,000 (FOB Shanghai) |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-B200 |
| Feed Flow Rate | 1.5–10 L/h |
| Effective Evaporation Area | 0.35 m² |
| Evaporator Internal Diameter | 200 mm |
| Condensation Area | 0.55 m² |
| Vacuum Level | < 0.1 Pa |
| Heating Temperature Range | Ambient to 200 °C |
| Wiper Material | PTFE + SS316L |
| Sealing | Fluoroelastomer (FKM) Gaskets (optional PTFE) |
| Motor Power | 120 W |
| Max Rotational Speed | ≤450 rpm |
| Brand | Anyan (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Shanghai, China |
| Model | AYAN-B220 |
| Heating Surface Diameter | 220 mm |
| Evaporation Area | 0.5 m² |
| Condensation Area | 0.65 m² |
| Feed Volume Capacity | 5 L |
| Processing Flow Rate | 2.0–15.0 L/h |
| Motor Power | 200 W |
| Max Rotational Speed | ≤450 rpm |
| 刮板间� | �: 0.5–1.5 mm |
| Vacuum Capability | ≤1 Pa (absolute) |
| Heating Temperature Range | Ambient to 200 °C |
| Light Fraction Collection Bottle | 5 L |
| Heavy Fraction Collection Bottle | 5 L |
| Integrated Cold Trap | Yes |
| External Condenser | Yes |
| Cooling System | Yes |
| [Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-B80 |
| Effective Evaporation Area | 0.1 m² |
| Evaporator Internal Diameter | 80 mm |
| Condenser Area | 0.15 m² |
| Feed Rate | 0.5–4.0 L/h |
| Vacuum Capability | < 0.1 Pa |
| Heating Temperature Range | Ambient to 200 °C |
| Wiper Material | PTFE + SS316L |
| Sealing | Fluoroelastomer (FKM) gaskets, optional PTFE |
| Motor Power | 120 W |
| Max. Wiper Speed | ≤ 450 rpm |
| Light Fraction Collection Bottle | 1 L |
| Heavy Fraction Collection Bottle | 1 L |
| Integrated Cold Trap | Yes |
| External Condensation Unit | Yes |
| Cooling System | Integrated] |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-B80 |
| Feed Capacity | 2 L |
| Effective Evaporation Area | 0.1 m² |
| Evaporator Internal Diameter | 80 mm |
| Condensation Area | 0.15 m² |
| Dual Collection Flasks | Yes |
| Operating Vacuum | < 5 mmHg (< 667 Pa) |
| Film Thickness | < 0.5 mm |
| Max Heating Temperature | 200 °C |
| Motor Power | 120 W |
| Max Rotational Speed | 450 rpm |
| 刮板材质 | PTFE + SS316L |
| Sealing | Silicone Gaskets (PTFE optional) |
| Cooling | Integrated Water-Cooled Condenser + External Cold Trap |
| Brand | Anyan Instruments |
|---|---|
| Origin | Shanghai, China |
| Model | AYAN-B80 |
| Internal Diameter | 80 mm |
| Evaporation Area | 0.1 m² |
| Condensation Area | 0.15 m² |
| Feed Volume | 2 L |
| Processing Flow Rate | 0.5–4.0 L/h |
| Motor Power | 120 W |
| Max Rotational Speed | ≤450 rpm |
| Light Fraction Collection Bottle | 1 L |
| Heavy Fraction Collection Bottle | 1 L |
| Cold Trap | Integrated |
| External Condenser | Equipped |
| Cooling System | Built-in |
| Ultimate Vacuum | <100 Pa |
| Heating Temperature Range | Ambient to 200 °C |
| Brand | ANYAN |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-B80 |
| Feed Capacity | 2 L |
| Effective Evaporation Area | 0.1 m² |
| Evaporator Internal Diameter | 80 mm |
| Condensation Area | 0.2 m² |
| Collecting Flask Capacity | 2 L |
| Operating Vacuum | ≤1 Pa |
| Heating Temperature Range | Ambient to 300 °C |
| Condensing Temperature | −20 °C |
| Rotational Speed | 300 rpm |
| Motor Power | 200 W |
| 刮板角度 | 45° |
| Cooling System | Integrated dual-stage condenser with refrigerated coolant circulation |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-B80 |
| Feed Rate | 0.5–4.0 L/h |
| Effective Evaporation Area | 0.1 m² |
| Evaporator Internal Diameter | 80 mm |
| Condenser Area | 0.15 m² |
| Ultimate Vacuum | <0.1 Pa |
| Heating Temperature Range | Ambient to 200 °C |
| Motor Power | 120 W |
| Max Rotational Speed | ≤450 rpm |
| Light Fraction Collection Bottle Capacity | 1 L |
| Heavy Fraction Collection Bottle Capacity | 1 L |
| Integrated Cold Trap | Yes |
| External Condensation Unit | Yes |
| Cooling System | Yes |
| Gasket Material | Fluoroelastomer (FKM), optional PTFE upgrade |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-B80 |
| Feed Rate | 0.5–4.0 L/h |
| Effective Evaporation Area | 0.1 m² |
| Evaporator Internal Diameter | 80 mm |
| Condensation Area | 0.15 m² |
| Light Fraction Collection Flask | 1 L |
| Vacuum Level (Empty) | <10 Pa |
| Heating Temperature Range | Ambient to 200 °C |
| Max Rotational Speed | ≤450 rpm |
| Motor Power | 120 W |
| Construction Materials | SS316L + PTFE Wiper Blades |
| Sealing | Fluoroelastomer (FKM) Gaskets (optional PTFE upgrade) |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Model | AYAN-DA5L |
| Output Flow Rate | 0–5 L/min |
| Output Pressure | 0–0.5 MPa |
| Hydrocarbon Content | < 0.1 ppm (after catalytic oxidation) |
| Dew Point | −45 °C |
| Carbon Filter Replacement Interval | Every 1000 operating hours |
| Desiccant | Indicating silica gel (blue-to-pink transition) |
| Compressor Type | Oil-free diaphragm compressor |
| Gas Storage Tank | Electropolished stainless steel with auto-drain |
| Filtration Stages | Dual-stage particulate + activated carbon + catalytic oxidation + molecular sieve (0.5 µm retention efficiency ≥99.99%) |
| Safety Features | Overpressure protection, thermal overload cutoff, low-pressure startup circuit |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-DC12G |
| Heating Method | Dry-Block Heating |
| Temperature Range | Ambient +5°C to 150°C |
| Temperature Uniformity | ±1°C |
| Sample Capacity | 12 positions |
| Tube Diameter Compatibility | Up to 16 mm (interchangeable modules) |
| Gas Flow Control Range | 0–999 mL/min (digital mass flow control) |
| Programmable Stages | 50-step temperature ramping |
| Display | 7-inch capacitive touchscreen interface |
| Gas Preheating | Yes (≈45°C) |
| Sealing System | Dual-gasket sealed door with internal recirculating fan |
| Data Logging | Built-in multi-session storage with timestamped operational records |
| Power Supply | Standard 220 VAC, 50 Hz |
| Safety Features | Overtemperature protection, gas leak detection alarm, automatic shutdown on door opening |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-DC12S |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 100 °C |
| Temperature Uniformity | ±1 °C |
| Sample Capacity | 12 positions |
| Tube Compatibility | 50 mL or 150 mL vials |
| Gas Flow Control | 0–15 L/min (adjustable per channel) |
| Heating Power | 1000 W |
| Display | 7-inch capacitive touchscreen |
| Control Modes | 5 preset + 50 programmable temperature ramps |
| Preheated Nitrogen Delivery | ~45 °C |
| Sealing System | Dual-sealed observation door with circulating fan |
| Data Logging | Internal storage for operational parameters and run history |
| Brand | ANYAN |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-DC16G |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient to 100 °C |
| Temperature Stability | ±1 °C |
| Sample Capacity | 16 positions |
| Tube Diameter Compatibility | 16 mm (interchangeable modules available) |
| Nitrogen Flow Rate | 0–15 L/min (adjustable per channel) |
| Heating Power | 300 W |
| Display | 7-inch LCD touchscreen |
| Programmable Temperature Profiles | Up to 50 segments |
| Timing Range | 0–999 min |
| Pressure Regulation Range | 0–0.8 MPa |
| Independent Gas Control | 16-channel precision regulation |
| Sealing System | Dual-seal insulated door with 4-sided transparent viewing window |
| Integrated Exhaust Fan | Yes |
| Motorized Vertical Adjustment | Yes |
| Sample Access | Drawer-type sliding tray |
| Over-Temperature Protection | Yes |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-DC16G |
| Sample Capacity | 16 positions |
| Heating Method | Dry block heating |
| Temperature Range | Ambient to 100 °C |
| Temperature Accuracy | ±1 °C |
| Display | 7-inch LCD touch screen |
| Control Modes | 5 preset modes |
| Programmable Temperature Segments | 50 |
| Timer Range | 0–999 min |
| Visual Design | 4-sided transparent viewing windows |
| Sample Access | Drawer-style sliding tray |
| Needle Adjustment | Dual-mode (fine-tuning + rapid lift) |
| Gas Pressure Regulation | 0–0.8 MPa |
| Independent Gas Flow Control | 16-channel electromagnetic valve array |
| Preheated Nitrogen Inlet | ~45 °C |
| Integrated Circulating Fan System | Yes |
| Dual-seal Door Protection | Yes |
| Built-in Data Logging | Yes |
| Heating Power | 220 W |
| Heating Block Material | Aerospace-grade aluminum alloy |
| Module Diameter Compatibility | 16 mm (interchangeable) |
| Brand | ANYAN (Hangzhou Anyan Instrument Co., Ltd.) |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-DC16G |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient to 100 °C |
| Temperature Accuracy | ±1 °C |
| Sample Capacity | 16 positions |
| Heating Power | 220 W |
| Display | 7-inch capacitive touch LCD |
| Programmable Stages | 50 segments |
| Control Modes | 5 preset operational modes |
| Gas Pressure Range | 0–0.8 MPa |
| Independent Gas Flow Control | 16 channels |
| Sample Tube Diameter | 16 mm (interchangeable modules) |
| Timer Range | 0–999 min |
| Vertical Needle Adjustment | Dual-mode (fine-tuning + rapid lift) |
| Integrated Preheated N₂ Supply | ~45 °C |
| Sealing System | Dual-layer door gasket with recirculating fan |
| Housing Design | Front & side observation windows |
| Sample Tray | Drawer-type sliding rack |
| Data Logging | Built-in storage for runtime parameters |
| Safety Features | Over-temperature alarm, automatic gas shutoff logic, sealed chamber architecture |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-DC16G |
| Heating Method | Dry-block (aluminum block) |
| Temperature Range | Ambient to 99 °C |
| Temperature Stability | ±0.5 °C |
| Sample Capacity | 16 positions |
| Gas Flow Rate | 0–15 L/min |
| Tube Diameter Compatibility | Customizable (standard: 16 mm) |
| Heating Power | 150 W |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AYAN-DC20S |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 100 °C |
| Temperature Stability | ±0.5 °C |
| Sample Tube Diameter Compatibility | 10–30 mm |
| Gas Flow Control Range | 0–999 mL/min (adjustable per channel) |
| Sample Capacity | 20 positions |
| Heating Power | 800 W (typical for 20-position water bath configuration) |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | AYAN-DC25G |
| Price Range | USD 5,600 – 8,400 (FOB) |
| Heating Method | Dry-block (aluminum alloy heating module) |
| Temperature Range | Ambient to 150 °C |
| Temperature Stability | ±0.5 °C |
| Sample Capacity | 25 positions |
| Tube Diameter Compatibility | Up to 16 mm (interchangeable modules available) |
| Gas Flow Control Range | 0–999 mL/min (digital mass flow regulation per channel) |
| Control Interface | 7-inch capacitive touchscreen |
| Programmability | 50-step temperature ramping profiles across 5 operating modes |
| Gas Preheating | Yes (to ~45 °C) |
| Sealing System | Dual-glass door with silicone gasket and internal recirculating blower |
| Data Logging | Internal storage for ≥100 run logs with timestamped temperature/flow/position data |
| Power Rating | 1.2 kW |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | General Distributor |
| Product Category | Domestic |
| Model | AYAN-DC25G |
| Price | ¥30,000 |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient to 100 °C |
| Temperature Uniformity | ±1 °C |
| Sample Tube Capacity | 50 mL or 150 mL |
| Gas Flow Rate | 0–15 L/min |
| Sample Positions | 25 |
| Heating Power | 1000 W |
| Brand | Anyan Instruments |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-DC36S |
| Heating Method | Water-bath |
| Temperature Range | Ambient to 100 °C |
| Temperature Uniformity | ±1 °C |
| Sample Capacity | 36 positions |
| Tube Diameter | 16 mm (customizable) |
| Gas Flow Control | 0–999 mL/min (digital mass flow regulation) |
| Display | 7-inch capacitive touchscreen |
| Programmable Temperature Profiles | 50 segments across 5 operating modes |
| Timer Range | 0–999 min |
| Pressure Regulation | 0–0.8 MPa with independent solenoid valve per channel |
| Preheated Nitrogen Delivery | ~45 °C |
| Power Supply | 220 V, 50 Hz |
| Net Weight | 25 kg |
| Brand | Anyan |
|---|---|
| Origin | Zhejiang, China |
| Model | AYAN-DC36S |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 100 °C (±1 °C) |
| Temperature Uniformity | ±1 °C |
| Sample Capacity | 36 positions (also available in 48- and 60-position configurations) |
| Tube Diameter Compatibility | 16 mm (customizable) |
| Gas Flow Control | Independent electromagnetic valve per channel |
| Power Supply | 220 V, 50 Hz |
| Display | 7-inch capacitive touchscreen interface |
| Programmable Temperature Profiles | 50-segment ramp/soak |
| Timing Range | 0–999 min |
| Pressure Regulation Range | 0–0.8 MPa |
| Sealing System | Dual-glass door with internal recirculating fan |
| Ventilation Interface | Rear exhaust port (compatible with fume hood integration) |