Common Laboratory Equipment
Filter
Showing 121–150 of 4601 results
| Brand | Advion Interchim Scientific |
|---|---|
| Origin | France |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | puriFlash® 5.020 |
| Maximum Flow Rate | 300 mL/min |
| Maximum System Pressure | 20 bar |
| Pricing | Available Upon Request |
| Brand | Advion Interchim Scientific |
|---|---|
| Origin | France |
| Model | puriFlash® 5.050 |
| Flow Rate Range | up to 250 mL/min |
| Maximum Pressure | 50 bar |
| Dual-Mode Operation | Compatible with both flash chromatography and preparative HPLC (Prep-HPLC) methods |
| Brand | ADVR |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor (HCP/Longcai Technology) |
| Product Category | Imported Nonlinear Optical Waveguide Device |
| Model | MgO:LN Ridge |
| Pricing | Available Upon Request |
| Brand | AECC (Aviation Industry Corporation of China) |
|---|---|
| Origin | Beijing, China |
| Model | DR100 |
| Instrument Type | Single-Channel Electric Pipette |
| Automation Level | Motorized |
| Capacity Range | 0.5 g to 500 g (dependent on connected analytical balance) |
| Accuracy | ±0.03 g |
| Dimensions (L×W×H) | 140 mm × 180 mm × 360 mm |
| Weight | 4.4 kg |
| Power Input | 100–240 V AC, 50–60 Hz, 2.5 A |
| Output Voltage | 24 V DC, 5 A |
| Operating Temperature | 10–30 °C |
| Relative Humidity | 0–80 % RH |
| Compatible Liquids | Water and neutral aqueous solutions |
| Calibration | Supplied with certificate of conformity and traceable calibration report |
| Brand | AECC (Aviation Engine Corporation of China) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-2010 |
| Instrument Type | Single-Channel Electric Pipettor |
| Automation Level | Motorized Piston-Driven |
| Volume Range | Customizable (Standard Configurations: 5 mL, 10 mL, 25 mL) |
| Minimum Dispense Volume | 0.5 mL (at 5 mL total capacity), 1.0 mL (at 10 mL or 25 mL capacity) |
| Accuracy | ±0.01% (relative error, per JJG 646 verification data) |
| Dispense Modes | Full-range aspiration or volume-specific aspiration |
| Cleaning Modes | Multi-cycle standard wash / Low-volume multi-step wash (reagent-saving mode) |
| Syringe Material | Borosilicate glass |
| Fluidic Path Materials | PTFE tubing and fittings |
| Compliance | Fully compliant with JJG 646–2018 “Verification Regulation for Pipettes” (China National Metrology Technical Specification) |
| Brand | AECC (Aviation Engine Corporation of China) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JB-3010 |
| Instrument Type | Single-Channel Electric Pipette |
| Automation Level | Motorized Precision Spiking System |
| Channel Count | 1 |
| Volume Range | Customizable (250–1000 µL) |
| Minimum Dispense Volume | 25 µL (at 250 µL range) |
| Dispensing Accuracy (Relative Error) | ≤ ±0.22% (typical, per JJG 646) |
| Dispensing Precision (CV) | ≤ 0.04% (typical, per JJG 646) |
| Syringe Material | Borosilicate Glass |
| Fluidic Path Material | PTFE |
| Priming Modes | Full-Range Aspiration / Volume-Specific Aspiration |
| Cleaning Modes | Multi-cycle Standard Wash / Low-Volume Sequential Wash |
| Compliance | Fully compliant with JJG 646–2018 “Verification Regulation for Pipettes” (China National Metrology Verification Regulation) |
| Brand | AECC (Aviation Industry Corporation of China) |
|---|---|
| Origin | Beijing, China |
| Model | JB1010 |
| Instrument Type | Single-Channel Electric Pipette |
| Automation Level | Motorized |
| Volume Range | 1–99 mL per dispense (programmable in 0.01 mL increments) |
| Maximum Capacity | 10 mL |
| Accuracy | ±0.01 mL |
| Repeatability (RSD) | <0.15% |
| Dimensions (L×W×H) | 200 × 210 × 260 mm |
| Weight | 2.3 kg |
| Power Input | 100–240 V AC, 50–60 Hz, 2.5 A |
| Output Voltage | 24 V DC, 5 A |
| Power Consumption | 120 W |
| Operating Temperature | 0–40 °C |
| Operating Humidity | 0–80% RH |
| Chemical Compatibility | Neutral and acidic aqueous solutions |
| Regulatory Compliance | Supplied with calibration certificate and metrological verification report |
| Brand | AEMIC |
|---|---|
| Model | AE-1136D |
| Origin | Japan |
| Measurement Principle | Ratio-based comparative resistance measurement against external reference thermistor |
| Temperature Compensation | Automatic thermoelectric EMF cancellation |
| Measurement Speed | Ultra-high-speed (7-class sorting capability) |
| Output | Percentage deviation from reference standard (%) |
| Compliance | Designed for industrial QC environments |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Brand | AEMIC |
|---|---|
| Origin | Japan |
| Model | AE-1152D |
| Measurement Principle | 4-Terminal Kelvin (DC) |
| Basic Accuracy | ±(0.01% rdg + 1 μΩ) on 1 mΩ range |
| Minimum Resolution | 10 nΩ |
| Measurement Ranges | 0.0000 mΩ to 1.5000 kΩ |
| Test Currents | 3 A (1 mΩ), 1 A (10 mΩ), 100 mA (100 mΩ–10 Ω), 10 mA (100 Ω–1 kΩ), 1 mA (1 kΩ) |
| Open-Circuit Voltage | ≤5 V |
| Sampling Rate | 2–10 Hz (free-run) |
| Interfaces | Standard GPIB/RS-232C/Centronics (one optional interface built-in) |
| Comparator Outputs | Open-collector (max 40 V, 100 mA) for LO/GO/HI, CONT-E, EOC |
| Operating Environment | 5–40°C, ≤85% RH |
| Power Supply | AC 85–265 V, 50–60 Hz, ~60 VA |
| Dimensions | 333 W × 99 H × 300 D mm (excl. protrusions) |
| Weight | ~3 kg |
| Compliance | CE-marked |
| Key | Brand: AEROTECH |
|---|---|
| Origin | Sweden |
| Pump Type | Oil-Free Diaphragm Vacuum Pump |
| Ultimate Vacuum | 1 mbar |
| Pumping Speed | 1 L/min |
| Dimensions (W×D×H) | 300 × 300 × 400 mm |
| Weight | 2.5 kg |
| Motor | Brushless DC Stepper Motor |
| Drive | Ball-Bearing Coupled Stepper Drive |
| Flow Path Materials | PTFE, FFKM, 316 Stainless Steel |
| Compliance | Designed for ISO 8573-1 Class 0 compressed air–compatible environments (non-lubricated path) |
| Certifications | CE, RoHS |
| Power Supply | Low-voltage DC (specification model-dependent) |
| Brand | AGDIA |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Equipment |
| Instrument Type | Tissue Homogenizer |
| Sample Type | Soft Biological Tissues (e.g., leaf, stem, root) |
| Output Particle Size | 0.01–0.5 mm |
| Final Homogenate Particle Size | <40 µm |
| Batch Capacity | 10 mL per cycle |
| Power Options | Manual and Electric Drive Configurations |
| Compatible Consumables | AGDIA Certified Sample Grinding Bags (Single-Use, Sterile, RNase/DNase-Free) |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AZOFF |
| Price Range | USD 14,000–35,000 |
| Automation Level | Fully Automated |
| Number of Channels | Up to 24 parallel positions (expandable via modular configuration) |
| Extraction Format | Column-based SPE |
| Flow Rate Control | 1–60 mL/min (precisely regulated via syringe pump) |
| Eluent Solvent Capacity | Single solvent reservoir (compatible with ethyl ether, dichloromethane, and other low-boiling-point organic solvents) |
| Sample Capacity | 8–24 samples per run |
| Sample Loading Volume | Up to 20 mL per column |
| Wetted Materials | PTFE only (including tubing, valves, and fluidic pathways) |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | CH-200P |
| Pricing | Available Upon Request |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | SPE-M96 |
| Automation Level | Semi-Automatic |
| Channel Configuration | 96-Channel Parallel |
| SPE Format | Column-Based (96-Well Plate Compatible) |
| Pressure Delivery | Positive Pressure (Up to 60 psi) |
| Flow Control | Manual Regulator |
| Solvent Selection | Manual Solvent Switching |
| Sample Capacity | Up to 96 Samples per Run |
| Sample Loading | Manual |
| Wetted Materials | PTFE (Polytetrafluoroethylene) |
| Gas Source Required | Compressed Air or Nitrogen |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | Cleanert V96 |
| Heating Method | Dry-block heating |
| Temperature Range | Ambient +5°C to 80°C |
| Temperature Uniformity | ±1°C |
| Sample Format | 96-well microplate |
| Gas Flow Rate | 0–80 L/min |
| Heating Power | 450 W |
| Sample Capacity | 96 positions |
| Gas Heating Uniformity | Optimized for consistent thermal delivery across all wells |
| Adjustable Gas Manifold Height | Yes |
| Removable Gas Manifold | Yes |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | Cleanert V96 |
| Heating Method | Dry-block heating |
| Temperature Control Range | 10°C to 30°C ambient operating environment |
| Temperature Setting Range | Room temperature +5°C to 80°C |
| Temperature Stability | ±0.5°C (typical at setpoint) |
| Gas Flow Rate | 10–100 L/min (adjustable per channel) |
| Sample Capacity | Configurable for 24-, 48-, or 96-well formats via modular gas manifolds |
| Dimensions (W×D×H) | 360 mm × 287 mm × 367 mm |
| Compliance | Designed for ISO/IEC 17025-compliant laboratories |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | FL-MH100 |
| Pricing | Available Upon Request |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | NV-15G |
| Heating Method | Dry-block heating |
| Temperature Range | ≥5 °C above ambient to 150 °C |
| Temperature Uniformity | ±0.3 °C |
| Sample Capacity | 15 positions |
| Well Diameter | 19 mm |
| Well Depth | 70 mm |
| Gas Flow Rate | 0–15 L/min (0–100 psi) |
| Power Supply | 220 V / 50 Hz |
| Max. Power | 240 W |
| Net Weight | 4.7 kg |
| Operating Environment | 0–50 °C, ≤85% RH |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | NV15-G |
| Heating Method | Water Bath |
| Temperature Range | >5 °C above ambient to 80 °C |
| Temperature Stability | ±1 °C |
| Sample Tube Diameter | 20 mm |
| Gas Flow Rate | 0–10 L/min |
| Sample Capacity | 8–24 positions |
| Heating Power | 240 W |
| Tube Depth | 70 mm |
| Temp Accuracy | ±0.3 °C (at setpoint) |
| Operating Ambient | 0–50 °C, ≤85% RH |
| Power Supply | 220 V/50 Hz |
| Net Weight | 3.5 kg |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | NV24A-II |
| Sample Capacity | 24 positions |
| Heating Method | Dry-block heating (PTC) |
| Temperature Control | Programmable range with ±0.5 °C stability |
| Endpoint Detection | Optical fiber sensor for precise volume termination at 0.5 mL or 1.0 mL |
| Gas Flow Control | Independent per-channel on/off switching and real-time digital display of flow/pressure |
| Integrated Exhaust | Built-in active exhaust system for volatile organic compound (VOC) removal |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model Series | Pump Series |
| Pricing | Available Upon Request |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | QUEX-06E |
| Automation Level | Semi-Automatic |
| Channel Count | 6-Channel |
| Extraction Format | Column-Based SPE |
| Sample Capacity | 6 Samples |
| Compatible Devices | IC Columns & Syringe-Filter Assemblies |
| Material in Contact with Solvents | Chemically Resistant PTFE & Stainless Steel Components |
| Compliance | Designed for GLP-aligned sample preparation workflows |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | SPE-10 |
| Price Range | USD 14,000 – 35,000 |
| Automation Level | Fully Automated |
| Number of Channels | Multiple Independent Channels per Module |
| Extraction Format | Cartridge-Based SPE |
| Flow Rate Control | 0.1–30 mL/min |
| Solvent Selection | Up to 5 Different Elution/Wash Solvents |
| Sample Capacity per Module | 6 Samples |
| Scalability | Modular Expansion Supported |
| Sample Loading Volume | 0–5 L per Sample |
| Wetted Materials | PTFE (Polytetrafluoroethylene) |
| Pump Type | Valveless Precision Metering Pump |
| Fraction Collection | Multi-Fraction, Dual-Waste (Aqueous/Organic Separation) |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | SPE-60 |
| Automation Level | Fully Automatic |
| Number of Channels | 6 parallel extraction channels |
| Extraction Format | Cartridge-based (column) SPE |
| Flow Rate Control Range | 0.1–50.0 mL/min |
| Solvent Selection Capacity | 9 independent solvent reservoirs |
| Sample Throughput | 6 samples simultaneously |
| Sample Loading Volume | 0.1–20.0 mL (expandable to 2000 mL via optional large-volume module) |
| Wetted Materials | Stainless steel (316L), PTFE |
| Column Compatibility | Interchangeable modules for 1 mL, 3 mL, 6 mL, and 12 mL SPE cartridges |
| Integrated Online Concentration | Yes |
| Robotic Positioning | XYZ-axis precision robotic arm with auto-washable sampling needle |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | SPE-CLEANER-M12 |
| Automation Level | Semi-Automatic |
| Channel Count | 12-Channel |
| Extraction Type | Column-Based SPE |
| Sample Capacity | 1–12 samples |
| Sample Loading Volume | 50 mL |
| Wetted Materials | Polytetrafluoroethylene (PTFE) and Borosilicate Glass |
| Pressure Control | Dual-Stage Adjustable Positive Pressure |
| Column Compatibility | Standard Glass SPE Columns (with Optional Adapters) |
| Application Focus | Dioxin/Furan, DL-PCBs, and PBDEs Cleanup |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | SPE-D6 |
| Price | USD 1,550 (approx.) |
| Automation Level | Semi-Automatic |
| Number of Channels | 6 Independent Channels |
| Extraction Format | Cartridge-Based Solid-Phase Extraction |
| Flow Control Method | Manual Valve Regulation |
| Eluent Handling | Manual Solvent Addition |
| Sample Capacity | 2 Samples Simultaneously |
| Maximum Sample Volume per Run | 4 L |
| Wetted Materials | PTFE and 316L Stainless Steel |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Automation Level | Fully Automatic |
| Channel Count | 8 Independent Channels |
| Extraction Format | Cartridge-Based SPE |
| Flow Control | Per-channel adjustable and individually shutoff pneumatic flow regulation |
| Sample Capacity | Up to 8 samples simultaneously |
| Sample Loading Volume | Standard max. 50 mL |
| Dual-Pneumatic Circuit Design | One circuit for precise liquid flow control, one dedicated to cartridge drying/dehydration |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | SPE-M08 |
| Automation Level | Semi-Automatic |
| Channel Count | 8-Channel |
| Extraction Format | Cartridge-Based SPE |
| Flow Control | Manual (Individual Valve Adjustment) |
| Solvent Delivery | Manual Loading |
| Sample Capacity | 1–8 Samples in Parallel |
| Sample Load Volume | 0–5 L |
| Wetted Materials | PTFE (Polytetrafluoroethylene) |
| Dual-Air-Path Design | One for Precise Flow Regulation, One for Post-Elution Drying |
| Compatibility | Standard SPE Cartridges & 47 mm SPE Disks |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | SPE-M08 |
| Automation Level | Fully Automatic |
| Number of Channels | 8 |
| Extraction Format | Cartridge-Based SPE |
| Flow Control | Independent, adjustable flow per channel with individual on/off valve control |
| Sample Capacity | Up to 8 samples simultaneously |
| Sample Loading Volume | Up to 50 mL standard |
| Dual Gas Path Design | One path for precise liquid flow regulation, one dedicated to cartridge drying/dehydration |
| Brand | Agela |
|---|---|
| Origin | Tianjin, China |
| Model | SPE-M12 |
| Automation Level | Semi-Automatic |
| Channel Count | 12 Independent Channels |
| Extraction Format | Cartridge-Based SPE |
| Flow Control Method | Pneumatic Pressure Regulation |
| Solvent Types Supported | ≥5 Distinct Eluents |
| Sample Capacity | 1–12 Samples per Run |
| Sample Loading Volume | Up to 25 mL per Cartridge |
| Wetted Materials | PTFE (Polytetrafluoroethylene) |
| Valve Configuration | 12 Individually Adjustable Pneumatic Valves |
| Dual-Gas Path Architecture | One for Precise Flow Modulation, One for Post-Elution Drying/Desolvation |