Common Laboratory Equipment
Filter
Showing 2221–2250 of 5364 results
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Category | Domestic |
| Model | XZ-91-II |
| Instrument Type | Vacuum Drying Oven |
| Temperature Range | RT+10 to 250°C |
| Temperature Fluctuation | ±0.5°C |
| Internal Chamber Dimensions | 450 × 450 × 450 mm |
| Temperature Resolution | 0.1°C |
| Operating Ambient Temperature | 5–45°C |
| Inner Chamber Material | 304 Stainless Steel |
| Heating Method | External (Four-Side) Radiant Heating |
| Temperature Uniformity | ±1°C |
| Ultimate Vacuum Level | ≤133 Pa |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | XZD-2500 |
| Operating Mode | Continuous |
| Speed Range | 500–2500 rpm |
| Motion Type | Horizontal Orbital Shaking |
| Amplitude | 4 mm |
| Speed Display | LED Linear Bar Graph |
| Ambient Temperature Range | 4–45 °C |
| Rated Load Capacity | 5000 g |
| Power Supply | 220 V, 50 Hz |
| Input Power | 100 W |
| Timer Range | 1 min – 99 h 59 min |
| Dimensions (W×D×H) | 240 × 420 × 430 mm |
| Standard Accessories | Two foam tube racks (A250 & A515), replaceable tray垫 (B7) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | XZS-50-II |
| Instrument Type | Vacuum Oven |
| Temperature Range | RT+10 to 250 °C |
| Temperature Uniformity | ±0.5 °C |
| Chamber Dimensions (per chamber) | 415 × 370 × 345 mm (W×D×H) |
| Temperature Resolution | 0.1 °C |
| Operating Ambient Temperature | 5–45 °C |
| Inner Chamber Material | 304 Stainless Steel |
| Heating Method | Forced-Air Circulation (External Heating) |
| Ultimate Vacuum Level | ≤133 Pa |
| Cabinet Configuration | Stacked Dual-Chamber Vertical Design |
| Brand | DreTop |
|---|---|
| Origin | Shanghai, China |
| Model | YU-3GW |
| Instrument Type | Magnetic Stirring Water Bath |
| Speed Range | 0–1200 rpm |
| Temperature Range | +5 to 100 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Stability (at 37 °C) | ±0.5 °C |
| Bath Capacity | 3 L |
| Power Supply | 220 V ±10%, 50 Hz |
| Total Power | 300 W |
| Stirring Motor | DC 8 W |
| Construction | 304 Stainless Steel Bath & Lid, PP/High-Temp Resistant Control Housing, Powder-Coated Steel Enclosure |
| Heating Method | U-shaped Immersion Heater |
| Temperature Sensor | CU50 RTD |
| Display | LED Digital |
| Control | PID with Auto-Tuning |
| Safety Options | Optional Over-Temperature and Low-Water Alarms |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZDM-125V |
| Vacuum Level | ≤133 Pa |
| Chamber Dimensions | 500 × 500 × 500 mm |
| Internal Volume | 125 L |
| Temperature Range | RT+10°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ±0.1°C |
| Control System | PLC-based HMI with Color Touchscreen |
| Sample Capacity | Up to 4 wafer cassettes (standard 4-inch or 6-inch compatibility) |
| Chamber Material | Stainless Steel (304/316L grade) |
| Viewing Window | Tempered Glass with O-ring Sealed Access Door |
| Sealing | Integrated Silicone Rubber Gasket |
| Structural Design | Cuboidal Rigid Frame with Right-Angle Reinforcement |
| Compliance | RoHS, REACH, ISO 14644-1 Class 8 Cleanroom-Compatible Construction |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZDM-215V |
| Price Range | USD 5,600 – 16,800 |
| Power Supply | AC 220 V, 50 Hz |
| Control System | PLC-based intelligent touchscreen interface |
| Temperature Range | RT +10 °C to 200 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±0.1 °C |
| Ultimate Vacuum | ≤133 Pa |
| Chamber Dimensions (W×D×H) | 550 × 550 × 650 mm |
| Internal Volume | 210 L |
| Sample Capacity | Up to 4 standard wafer cassettes (e.g., 4 × 25-wafer FOUPs or equivalent) |
| Chamber Material | 304 stainless steel interior |
| Viewing Window | Tempered glass with O-ring sealed viewport |
| Sealing | Integrated silicone rubber gasket |
| Process Compatibility | Thermal evaporation, magnetron sputtering, pulsed laser deposition (PLD), molecular beam epitaxy (MBE), and plasma-enhanced chemical vapor deposition (PECVD) modules (modular integration supported) |
| Exhaust Treatment | Integrated HMDS/organic solvent recovery system compliant with RoHS & REACH |
| Brand | New Biolink |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DTRO |
| Application | Industrial Wastewater Treatment & High-Salinity Liquid Purification |
| Membrane Configuration | Disc Tube Reverse Osmosis (DT-RO) |
| Feed Water SDI Tolerance | Up to 6.5 |
| Typical Recovery Rate | 75–90% |
| Effluent Conductivity | As low as 100 µS/cm |
| Design Service Life | 5–10 years |
| COD<sub>Cr</sub> Tolerance | 1,000–20,000 mg/L |
| Total Dissolved Solids (TDS) Tolerance | 1,000–20,000 mg/L |
| Operating Cost | < USD 0.30 per cubic meter (based on typical energy & consumables) |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DL-100S |
| Ultrasonic Power | 100 W |
| Ultrasonic Frequency | 30 kHz |
| Temperature Range | 1–10 °C (with optional cooling module) |
| Sample Volume Capacity | 0.1–10 mL |
| Standard Probe Tip Diameter | Φ2 mm |
| Optional Probe Tips | Φ1.5 mm, Φ3 mm |
| Input Power Options | AC 100–240 V, 50/60 Hz |
| Safety Features | Real-time temperature monitoring, over-temperature alarm, automatic amplitude compensation, frequency auto-tracking, thermal protection circuitry |
| Probe Material | Titanium alloy (Grade 5, Ti-6Al-4V) |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DL-100Y |
| Ultrasonic Power | 100 W |
| Frequency Range | 19–26 kHz |
| Heating Power | 100 W (optional integrated heating) |
| Temperature Control Range | 1–10 °C (external chiller required for sub-ambient operation) |
| Sample Volume Capacity | 0.1–10 mL |
| Standard Probe Diameter | Φ1.5 mm |
| Optional Probe Diameters | Φ2 mm, Φ3 mm |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | DL-1032 |
| Instrument Type | Benchtop Centrifuge |
| Speed Range | 0–6000 rpm |
| Max RCF | 5037 × g |
| Max Capacity | 5 × 96 mL (horizontal rotor) |
| Dimensions (L×W×H) | 515 × 425 × 420 mm |
| Drive System | Maintenance-Free AC Variable-Frequency Motor |
| Control Interface | Microprocessor-Based Touch Panel with Dual LED Display (RPM & RCF) |
| Safety Features | Dual Interlocked Lid Lock, Automatic Imbalance Detection & Audio Alert, Instant Short-Spin Mode, At-Set-RPM Timing Function |
| Construction | Dual-Layer Steel Housing with Corrosion-Resistant Coating on Centrifuge Chamber |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | DL-1042R |
| Instrument Type | Benchtop Centrifuge |
| Speed Range | 0–5500 rpm |
| Max RCF | 5400 × g |
| Max Capacity | 4 × 250 mL (horizontal rotor) |
| Temperature Range | –20 °C to +40 °C |
| Dimensions (L×W×H) | 620 × 648 × 525 mm |
| Drive System | Brushless AC Frequency-Controlled Motor |
| Safety | Dual Interlocked Lid Lock, Automatic Imbalance Detection & Shutdown, Overspeed Protection, Acoustic Alert |
| Control | Microprocessor-Based Touchpad Interface with Simultaneous LED Display of Speed, RCF, Time, and Temperature |
| Programmability | 20 User-Defined Protocols, 15 Acceleration/Deceleration Profiles, Short Spin & “At Set RCF” Modes |
| Compliance | Designed to meet ISO 13485-aligned manufacturing practices |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | DL-1044 |
| Instrument Type | Benchtop Centrifuge |
| Speed Range | 0–6,000 rpm |
| Max RCF | 5,037 × g |
| Max Capacity | 5 × 96 mL (horizontal rotor) |
| Dimensions (L×W×H) | 580 × 485 × 420 mm |
| Construction | Dual-layer steel housing with stainless-steel centrifuge chamber |
| Drive System | Maintenance-free AC brushless frequency-controlled motor |
| Control Interface | Microprocessor-based touch keypad with LED display |
| Safety Features | Dual interlocked door latch, automatic imbalance detection, overspeed protection, audible alarm |
| Programmability | User-defined protocols with independent setpoints for RCF, speed, and time |
| Operational Mode | Real-time parameter adjustment during non-programmed runs |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DL-1044R |
| Instrument Type | Benchtop Centrifuge |
| Speed Range | 0–5500 rpm |
| Max RCF | 5400 × g |
| Max Capacity | 4 × 750 mL (horizontal rotor) |
| Temperature Range | –20 °C to +40 °C |
| Dimensions (L×W×H) | 702 × 590 × 890 mm |
| Drive System | Brushless AC Frequency-Controlled Motor |
| Rotor Compatibility | Horizontal, microplate, and fixed-angle rotors |
| Safety Features | Dual interlocked door lock, automatic imbalance detection, overspeed protection, acoustic alarm |
| Control Interface | LED-displayed parameters (speed, RCF, time, temperature), touch keypad, 20 programmable protocols |
| Acceleration/Deceleration | 15-step selectable ramp rates |
| Special Functions | “At Set RCF” timing mode, short-spin (pulse) mode, real-time parameter adjustment during non-programmed runs |
| Compliance | Designed per IEC 61010-2-020 (Safety Requirements for Centrifuges), supports GLP-compliant operation with audit-ready parameter logging |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Model | DL-2018H |
| Instrument Type | Benchtop Centrifuge |
| Speed Range | 10,000–30,000 rpm (Max. 18,800 rpm) |
| Max. RCF | 26,870 × g |
| Max. Capacity | 10 mL × 12 |
| Rotor Recognition | Magnetic auto-identification |
| Acceleration/Deceleration | 15 steps each |
| Timer Range | 1 s – 99 h 59 min 59 s |
| Speed Accuracy | ±10 rpm |
| Temperature Rise | <10 °C after 20 min operation |
| Noise Level | ≤58 dB(A) |
| Power Supply | AC 220 V, 50 Hz, 10 A |
| Power Consumption | 400 W |
| Dimensions (L×W×H) | 426 × 322 × 340 mm |
| Net Weight | 28 kg |
| Rotor Compatibility | H0.136, H0.232, H0.512, H0.524, H0212, H0224, H0512, H1012 |
| Sterilization | Autoclavable at 121 °C for ≥2 h |
| Safety | Dual interlock door, imbalance detection & auto-stop, soft-brake (SOFT mode), overspeed protection |
| Software Features | Programmable protocols (20 presets), differential centrifugation (DCT) mode (5 dedicated slots), real-time parameter display (speed, RCF, time, acceleration/deceleration profile), on-the-fly parameter adjustment |
| Brand | Duling |
|---|---|
| Origin | Italy |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | DL-300S |
| Ultrasonic Power | 300 W |
| Ultrasonic Frequency | 30 kHz |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Model | DL-3021H |
| Type | Benchtop Centrifuge |
| Category | High-Speed Centrifuge (10,000–30,000 rpm) |
| Maximum Speed | 21,000 rpm |
| Maximum RCF | 30,409 × g |
| Maximum Capacity | 6 × 100 mL |
| Dimensions (L×W×H) | 450 × 370 × 410 mm |
| Rotor Autoidentification | Magnetic |
| Sterilization | 121 °C, ≥2 h autoclave-compatible |
| Acceleration/Deceleration Profiles | 15-step selectable |
| Soft-Brake Function | Yes |
| Door Locking | Dual interlocked safety system |
| Control Interface | Full-color TFT touchscreen with real-time parameter display |
| Communication Option | RS-485 interface (optional) |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | DL-3021HR |
| Instrument Type | Benchtop Centrifuge |
| Speed Range | High-Speed (10,000–30,000 rpm) |
| Function | Refrigerated Centrifuge |
| Configuration | Horizontal Rotor |
| Separation Level | Cellular & Bacterial |
| Maximum Capacity | 6 × 100 mL |
| Maximum Speed | 23,000 rpm |
| Maximum RCF | 36,795 × g |
| Dimensions (L×W×H) | 570 × 590 × 490 mm |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | DL-3024HR |
| Instrument Type | Floor-Standing Centrifuge |
| Speed Range | 10,000–30,000 rpm |
| Function | Refrigerated Centrifuge |
| Configuration | Horizontal Rotor |
| Separation Class | Cellular & Bacterial |
| Maximum Capacity | 4 × 750 mL |
| Maximum Speed | 24,000 rpm |
| Maximum RCF | 40,217 × g |
| Dimensions (L×W×H) | 720 × 590 × 890 mm |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | DL-P2 |
| Price Range | USD 4,200 – 7,000 (FOB) |
| Purified Water Grade | ASTM Type I / ISO 3696 Class 1 / CLSI EP28-A3c Grade A |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | < 0.1 ppb |
| Total Organic Carbon (TOC) | < 3 ppb |
| Microbial Count | < 0.1 CFU/mL |
| Endotoxin Level | < 0.002 EU/mL |
| Particles (>0.1 µm) | < 1 particle/mL |
| Feed Water Requirement | Municipal tap water or pre-treated RO water (conductivity ≤ 300 µS/cm, chlorine < 0.5 mg/L, SDI < 5) |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | DL-P3 |
| Price Range | USD 4,200–7,000 (FOB) |
| Purified Water Grade | ASTM Type I / ISO 3696 Grade 1 |
| Resistivity | 18.2 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | < 0.1 ppb |
| Total Organic Carbon (TOC) | < 3 ppb |
| Microbial Count | < 0.001 EU/mL |
| Particulates (> 0.1 µm) | < 1 particle/mL |
| Flow Rate | 10 mL/min |
| Feed Water Requirements | RO or deionized water inlet |
| Operating Temperature | 5–35 °C |
| Ambient Pressure | 0.1–0.4 MPa (1–4 bar) |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | DL-R2 |
| Price Range | USD 4,200 – 7,000 (FOB) |
| Purified Water Grade | ASTM Type II Reagent Water |
| Resistivity | 1–105 MΩ·cm @ 25 °C |
| Heavy Metals & Soluble Silica | < 0.1 ppb |
| Total Organic Carbon (TOC) | < 3 ppb |
| Microbial Count & Endotoxins | < 0.002 EU/mL |
| Particles (> 0.1 µm) | < 1 particle/mL |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | MDC-5 |
| Pricing | Available Upon Request |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Model | MPC-5V416EX |
| Type | Upright |
| Capacity | 416 L |
| Net Weight | 150 kg |
| Climate Class | SN/N |
| Cooling Method | Forced Air (Fan-Cooled) |
| Operating Temperature Range | 2–8 °C |
| Energy Consumption | 2.94 kWh/24h |
| Brand | Milestone |
|---|---|
| Origin | Italy |
| Model | duoPUR Ultra-High-Purity Acid Purification System |
| Principle | Sub-boiling Infrared Radiative Distillation |
| Throughput | 3000 mL in 8 h |
| Construction | High-Purity Fused Quartz Distillation Chamber |
| Automation | Motorized Acid Feed & Drain, Touchscreen HMI with Programmable Protocols |
| Safety | Dual Thermal Protection (Overheat & Dry-Run Prevention) |
| Compliance | Designed for ISO/IEC 17025-compliant trace-metal laboratories |
| Brand | Dürr Technik |
|---|---|
| Origin | Germany |
| Compressor Type | Piston |
| Flow Rate | 0–78 L/min |
| Operating Pressure | 0–10 bar |
| Dew Point | Optional Desiccant Drying |
| Filtration Grade | 0.01 µm or 0.1 µm (selectable) |
| Air Receiver Volume | 55 L |
| Configuration | Modular Multi-Head Mounting Platform |
| Brand | Durr Technik |
|---|---|
| Origin | Germany |
| Type | Imported |
| Model | PAG-132 |
| Compression Principle | Piston-Type |
| Flow Rate | 0–132 L/min |
| Operating Pressure | 0–10 bar |
| Filtration Grade | 0.01 µm or 0.1 µm particulate removal |
| Brand | DW-Micro |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | DW-JURAY |
| Price Range | USD 7,000 – 14,000 |
| Weighing Accuracy | ±0.01 g |
| Liquid Dispensing Accuracy | ±0.1 g |
| Dilution Accuracy | >99% |
| Dilution Factor Range | 1/2 to 1/99 (2-fold to 99-fold) |
| Maximum Dilution Volume | 250 mL |
| Dilution Time (DW-JURAY) | <60 s |
| Dilution Time (DW-JURAY-2) | <20 s |
| Display | Backlit LCD with Real-Time Weight & Ratio Readout |
| Data Storage | Onboard Microprocessor with Audit-Trail-Capable Logging |
| Compliance | GB 4789, ISO 6887-1, ISO 7218 |
| Power Supply | 220 V AC, 50 Hz (with Universal Adapter Option) |
| Brand | Dynamica |
|---|---|
| Origin | Germany |
| Model | V30R |
| Instrument Type | Benchtop High-Speed Refrigerated Centrifuge |
| Speed Range | 200–30,000 rpm (10 rpm increments) |
| Max RCF | 66,410 × g |
| Max Capacity | 6 × 250 mL |
| Temperature Range | −20 °C to +40 °C (1 °C increment) |
| Temperature Accuracy | ±1 °C |
| Acceleration/Deceleration Steps | 10/10 |
| Noise Level | <60 dB(A) |
| Dimensions (L×D×H) | 715 × 510 × 420 mm |
| Net Weight | 91 kg |
| Power Supply | 230 V, 50/60 Hz |
| Drive System | Brushless Induction Motor |
| Control System | Microprocessor-Based |
| Rotor Auto-Recognition | Yes (with overspeed protection) |
| Imbalance Detection | Yes |
| Timer Range | 30 s – 99 h 59 min + HOLD |
| Speed/RCF Conversion | Yes |
| Programmable Methods | 99 |
| Display | LCD |
| Brand | Dynamica |
|---|---|
| Model | VELOCITY 14/14R Pro |
| Type | Refrigerated Benchtop Centrifuge |
| Max Speed | 14,000 rpm |
| Max RCF | 21,780 × g |
| Max Capacity | 6 × 50 mL |
| Temperature Range | –20 °C to +40 °C |
| Acceleration/Deceleration | 9-step programmable |
| Unbalance Detection | Non-contact electronic |
| Rotor Recognition | Automatic |
| Drive | Brushless Induction Motor |
| Noise Level | <58 dB(A) (14R), <53 dB(A) (V14) |
| Dimensions (W×D×H) | 560 × 500 × 380 mm (14R), 340 × 490 × 380 mm (V14) |
| Net Weight | 60 kg (14R), 40 kg (V14) |
| Power Supply | AC 220 V, 50/60 Hz, 10 A (14R), 8 A (V14) |
| Brand | Dynamica |
|---|---|
| Origin | Shanghai, China |
| Model | Velocity 17/17R Pro |
| Type | Benchtop Refrigerated Centrifuge |
| Speed Range | Up to 17,000 rpm |
| Max RCF | 25,507 × g |
| Max Capacity | 6 × 50 mL |
| Temperature Range | –20 °C to +40 °C |
| Dimensions (W × D × H) | 560 × 500 × 380 mm |
| Rotor Compatibility | 16 interchangeable rotors (angle, fixed-angle, swing-out) |
| Safety Certifications | IEC 61010-1, EN 61326-1 |
| Compliance | GLP-ready, supports audit trails and user access control |