Common Laboratory Equipment
Filter
Showing 2371–2400 of 5364 results
| Brand | Esco |
|---|---|
| Model | VBD |
| Origin | Singapore |
| Type | ULPA-Filtered Clean Bench for Animal Facility Use |
| Power Supply | 220–240 VAC, 50 Hz |
| Inflow Air Velocity | 0.35 m/s (70 fpm) |
| External Dimensions (H min/max) | 1247 × 760 × 1966 mm / 1247 × 760 × 2271 mm |
| Internal Work Area | 1040 × 680 × 594 mm |
| Filter System | ULPA + Nanocarb Activated Carbon + Pre-filter |
| Surface Finish | Stainless Steel (ISOCEDE® Antimicrobial Coating) |
| Integrated Waste Container | 40-gallon NSF-certified |
| Height Adjustment | Hydraulic Mechanism |
| Control System | Sentinel Microprocessor-based Controller |
| Compliance | NSF/ANSI 49 Class I Equivalent Design Principles, ISO 14644-1 Class 5 (at work surface), GLP-ready configuration |
| Brand | Esco |
|---|---|
| Origin | Singapore |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | VDA-4A8 / VDA-5A8 |
| Pricing | Available Upon Request |
| External Dimensions (L×W×H) | VDA-4A8 – 1340 × 762 × 1961 mm (low height) / 1340 × 762 × 2245 mm (high height) |
| Work Area Dimensions (L×W×H) | VDA-4A8 – 1100 × 465 × 564 mm |
| Downflow Velocity | 0.24 m/s (47 fpm) |
| Power Supply | 220–240 VAC, 50/60 Hz, 1-phase |
| Brand | Esco |
|---|---|
| Origin | Singapore |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | VDA-A |
| Pricing | Available Upon Request |
| External Dimensions (L×W×H) | 1340 × 762 × 1961 mm (Low-Height Configuration) / 1340 × 762 × 2245 mm (High-Height Configuration) |
| Internal Work Area (L×W×H) | 1100 × 465 × 564 mm |
| Downflow Air Velocity | 0.24 m/s (47 fpm) |
| Power Supply | 220–240 VAC, 50/60 Hz, Single-Phase |
| Brand | Esco |
|---|---|
| Origin | Singapore |
| Model | VA2-A1-E |
| External Dimensions (L×W×H) | 1423 × 815 × 1510 mm |
| Internal Work Area (L×W×H) | 1270 × 623 × 680 mm |
| Inflow Velocity | 0.45 m/s |
| Downflow Velocity | 0.35 m/s |
| Power Supply | 220–240 VAC, 50/60 Hz |
| Filtration | Dual ULPA (≥99.999% @ 0.12 µm MPPS) |
| Pre-filter | Polyester pleated, 85% arrestance |
| Compliance | ISO 14644-1 Class 3 (equivalent to Fed Std 209E Class 1), NSF/ANSI 49 compliant design principles, GLP-aligned operational safeguards |
| Brand | ESEN |
|---|---|
| Origin | Zhejiang, China |
| Model | ADR-60 |
| Material | ETFE/FEP/PFA/PP |
| Sterilization | Autoclavable (121°C, 20 min) & UV-compatible |
| Certifications | ISO 9001:2015, ISO 13485:2016, CE, ISO/IEC 17025 compliant |
| Valve Type | Spring-free recirculating valve |
| Dispensing Range | Adjustable via dual-scale graduated cylinder (precise volume setting) |
| Rotational Design | 360° swivel nozzle |
| Filling Tube | Telescopic (170–300 mm), chemically resistant |
| Sealing System | Wiper-sealed piston with integrated cleaning interface |
| Safety Feature | Lockable recirculation switch to prevent sample loss and reagent waste |
| Brand | ESI |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | LabStation |
| Pricing | Upon Request |
| Brand | ESI |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | TRAXStation |
| Pricing | Available Upon Request |
| Brand | LabTech |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ET Series |
| Instrument Type | Automatic Quantitative Concentrator |
| Temperature Range | Contact Manufacturer |
| Temperature Control Accuracy | Contact Manufacturer |
| Sample Capacity | Contact Manufacturer |
| Brand | MILESTONE |
|---|---|
| Origin | Italy |
| Model | ETHOS X |
| Extraction Principle | Microwave-Assisted Solvent-Free Microwave Extraction (SFME) |
| Capacity Options | 2 L, 5 L, 12 L (lab & pilot) |
| Typical Extraction Time | 5–8 min (first drop), ~40 min (complete yield) |
| Output Compatibility | Direct GC-MS injection without solvent removal |
| Compliance | Designed for GLP-compliant workflows |
| Software Interface | Touchscreen GUI with method storage, real-time power/temperature monitoring, and exportable extraction logs (CSV, PDF) |
| Brand | Milestone |
|---|---|
| Origin | Italy |
| Model | ETHOS X |
| Application | Rapid total fat determination in food and feed samples |
| Sample throughput | 15 positions |
| Sample mass range | 3–15 g |
| Total process time | ≤ 3 hours |
| Temperature control | Full-vessel infrared temperature monitoring |
| Automation | Integrated balance interface for automatic mass data import and calculation |
| Extraction methodology | Microwave-assisted acid hydrolysis coupled with solvent extraction |
| Stirring | Built-in magnetic stirring system |
| Compliance context | Designed to support AOAC 991.36, ISO 1443, and USP <467> workflows |
| Brand | EXPEC |
|---|---|
| Model | ETV 720 |
| Origin | Zhejiang, China |
| Type | Solid Direct Introduction Electrothermal Vaporization System |
| Max Temp | 3000 °C (infrared non-contact detection + PID control) |
| Sample Capacity | 40 boats |
| Motion Control | Micrometer-level precision positioning |
| Gas Flow Control | Milliliter-level accuracy |
| Automation | Fully automated sample loading, insertion, and thermal program execution |
| Compliance | Designed for ISO/IEC 17025-aligned workflows, compatible with GLP/GMP data integrity requirements |
| Brand | Euro Tech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | ET3200B |
| Price Range | USD 1,400–7,000 |
| Instrument Type | Liquid-Liquid Extraction |
| Extraction Vessel Volume | 500 mL × 3 |
| Extraction Cycle Time | 1–5 min per station |
| Dimensions (W×D×H) | 460 × 250 × 650 mm |
| Sample Positions | 3 |
| Power Supply | 220 V / 50 Hz |
| Rated Power | 30 W |
| Net Weight | 15.7 kg |
| Operating Principle | Mechanical Stirring-Assisted Phase Separation |
| Brand | Euro Tech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | ET3200C |
| Instrument Type | Liquid-Liquid Extraction |
| Extraction Vessel Volume | 1000 mL × 3 |
| Extraction Time Range | 1–5 min per station |
| Dimensions (W×D×H) | 460 × 250 × 650 mm |
| Sample Throughput | 3 independent stations |
| Power Supply | 220 V / 50 Hz |
| Rated Power | 20 W |
| Net Weight | 15.7 kg |
| Brand | EURO TECH |
|---|---|
| Origin | Shanghai, China |
| Model | ET3301A |
| Instrument Type | Purge-and-Trap Nitrogen Evaporator |
| Temperature Range | Ambient to 95 °C |
| Temperature Control Accuracy | ±1 °C |
| Maximum Sample Capacity | 60 samples |
| Gas Inlet Pressure | 60–100 psi |
| Maximum Gas Flow per Nozzle | 2 L/min |
| Timer Range | 1–999 min |
| Power Supply | 230 V, 50 Hz (optional 110 V, 60 Hz) |
| Dimensions (W×H×D) | 54 × 31 × 35 cm |
| Net Weight | 25 kg |
| Shipping Weight | 35 kg |
| Brand | EURO TECH |
|---|---|
| Origin | Shanghai, China |
| Model | ET3302A |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 95 °C (adjustable) |
| Temperature Stability | ±2–4 °C |
| Sample Capacity | 6 positions (compatible with 50 mL and 200 mL glass tubes) |
| Gas Flow Control | 4–25 PSI (adjustable) |
| Heating Power | 1100 W |
| Endpoint Detection | Optical sensor-based auto-termination |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | EURO TECH |
|---|---|
| Origin | Shanghai, China |
| Model | ET3302B |
| Sample Capacity | 6 × 50 mL or 6 × 200 mL |
| Temperature Range | Ambient to 95 °C |
| Temperature Control Accuracy | ±1 °C |
| Gas Flow Control Range | 4–25 psi |
| Endpoint Detection Options | 0.5 mL or 1.0 mL (optical sensor) |
| Operating Modes | Auto-Endpoint, Manual, Timer, Auto-Endpoint + Timer |
| Water Bath Temp Range | Ambient to 60 °C |
| Power Supply | 220 VAC, 50 Hz |
| Dimensions (W×D×H) | 54 × 31 × 35 cm |
| Net Weight | 25 kg |
| Exhaust Port | 5 cm ID × 3 m exhaust hose included |
| Gas Inlet | 8 mm OD tubing |
| Recommended Gas Supply Pressure | ≥40 psi (regulated), max 100 psi |
| Typical Evaporation Rate | 2–8 mL/min (dependent on bath temp & gas flow) |
| Brand | EURO TECH |
|---|---|
| Origin | Shanghai, China |
| Model | ET3303 |
| Sample Capacity | 12 positions (compatible with 50 mL and 200 mL glass tubes) |
| Temperature Range | Ambient to 60 °C |
| Gas Pressure Range | 0–25 psi (adjustable) |
| Endpoint Detection Options | 0.5 mL or 1.0 mL (optical sensor-based) |
| Display | 8-inch capacitive touchscreen |
| Power Supply | 220 VAC, 50 Hz |
| Dimensions (W×H×D) | 54 cm × 31 cm × 35 cm |
| Net Weight | 25 kg |
| Exhaust Duct | 5.1 cm ID × 3.0 m length included |
| Timer Range | 1–999 minutes |
| Gas Inlet Requirement | Minimum 40 psi supply pressure, regulated to ≤100 psi maximum |
| Brand | EuroTech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | ET3301B |
| Price Range | USD 7,000 – 14,000 |
| Sample Capacity | Up to 60 positions |
| Water Bath Temperature Range | Ambient to 95 °C |
| Timer Range | 1–999 minutes |
| Gas Inlet Pressure | 60–100 psi |
| Nitrogen Flow per Nozzle | Up to 2 L/min |
| Flow Control | Digital Pressure-Regulated |
| Independent Channels | 6 |
| Display | 7-inch LCD touchscreen |
| Dimensions (W×H×D) | 54 × 31 × 35 cm |
| Net Weight | 25 kg |
| Power Supply | 230 V, 50 Hz (optional 110 V, 60 Hz) |
| Brand | EURPING |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Poseidon I |
| Price Range | USD 110,000 – 138,000 |
| Chamber Volume | 1050 L |
| Heating Power | 18 kW |
| Maximum Wash Temperature | 95 °C |
| Compatible Detergent | F1+25 |
| External Dimensions (L×W×H) | 1965 × 1316 × 1895 mm |
| Construction | 304 Stainless Steel Exterior / 316L Stainless Steel Interior |
| Dual-Circulation Pump System | 2 × 800 L/min (Total 1600 L/min) |
| Water Supply Options | Potable Water, Purified Water, Condensate, WFI |
| Dual-Compressor Hot Air Drying System | ≥145 m³/h per blower, 700 W per fan, Adjustable Drying Temp: RT–120 °C, Drying Duration: 0–300 min |
| Compliance | EN ISO 15883, ISO 9001, ISO 14001, ISO 45001, CE, FDA 21 CFR Part 11 (Electronic Records & Signatures), cGMP & GAMP 5 Aligned Validation Support (IQ/OQ/PQ, FAT/SAT, URS/FS Traceability) |
| Brand | EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM/ODM) |
| Country of Origin | China |
| Model | HA-300 |
| Pressure Rating | 3–5 MPa |
| Construction Material | 316L Stainless Steel Endplates, Nickel-Plated Flow Field Plates |
| Fluid Configuration | Single-Side Inlet/Outlet (Bottom-In/Top-Out) |
| Active Area | Customizable |
| Interface | Open Mechanical & Electrical Interface for User-Provided MEA/GDL |
| Compliance | Designed for ASTM D7284, ISO 22742, and IEC 62282-6-100-aligned test protocols |
| Brand | EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Model | HC-100 |
| Material | PEEK + 316L Stainless Steel + PFA |
| Active Area | 0.5 cm² |
| Operating Temperature Range | Ambient to 95 °C |
| Relative Humidity Control | Up to 100 % RH |
| Gas Supply Interface | Standardized mass flow-controlled O₂ inlet |
| Electrolyte Compatibility | Acidic (e.g., 0.1 M HClO₄, 0.5 M H₂SO₄) and alkaline media |
| Three-Phase Interface Design | Gas–Solid–Liquid |
| Compliance | Designed for ASTM D7212, ISO 23841, and fuel cell catalyst R&D workflows per DOE Hydrogen Program Targets |
| Brand | EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Model | HC-100H |
| Pricing | Upon Request |
| Construction Materials | PEEK + ASTM F138 Grade 316L Stainless Steel |
| Operating Temperature Range | 25–95 °C |
| Relative Humidity Control | 0–100% RH (Auto-humidification via integrated water vapor diffusion manifold) |
| Compatible Electrode Formats | GDEs up to 5 cm² active area |
| Measurement Capabilities | Polarization curve acquisition, electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), chronoamperometry (CA) |
| Fluidic Interface | Dual gas inlets (anode/cathode), liquid water injection ports, integrated pressure regulation (0–300 kPa gauge) |
| Compliance | Designed per ISO 8502-3 (surface cleanliness), ASTM D7234 (adhesion testing for coated substrates), and compatible with GLP-compliant test protocols |
| Brand | EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Model | HM-200 |
| Pricing | Available Upon Request |
| Compatible MEA Size | 5 cm × 5 cm (customizable active area & flow field pattern) |
| End Plates | 316L stainless steel |
| Current Collectors | Gold-plated copper |
| Bipolar Plates | Graphite |
| Sealing | Viton® gaskets |
| Max Operating Pressure | 3 bar (gauge) |
| Max Operating Temperature | 80 °C |
| Electrical Contact Resistance | < 5 mΩ (typical, under 1.5 MPa clamping force) |
| Brand | EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Model | HM-200H |
| Pricing | Available Upon Request |
| Humidity Control | Integrated 100% RH self-humidification module |
| MEA Active Area | 5 cm × 5 cm (standard) |
| Flow Field Options | Customizable (serpentine, interdigitated, parallel) |
| End Plate Material | 316L stainless steel |
| Current Collector | Gold-plated copper |
| Bipolar Plate Material | Graphite |
| Electrical Connection | Four-terminal Kelvin sensing compatible |
| Operating Temperature Range | 25–80 °C (ambient to mild thermal control support) |
| Brand | EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Model | HP-300 |
| Temperature Range | RT+5°C to 90°C |
| Maximum Operating Pressure | 3–5 MPa |
| Flow Configuration | Bottom-in/Top-out (single-sided) |
| Customization | Active Area, Flow Field Design, Core Material |
| Key | Brand: EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | Nova HT1000 |
| Heating Plate Temperature Range | Up to 300 °C |
| Maximum Applied Force | 200 kN (20 tonf) |
| Max. Platen Size | 300 × 300 mm |
| Positional Speed Control Resolution | 0.01 mm/s |
| Platen Material | SKD11/SKD61 Chromium-Molybdenum Alloy with Mirror-Finish Chrome Plating |
| Cooling System | Pressure-Controlled Automatic Water-Cooling Circuit |
| Control Mode | Manual & Programmable Multi-Stage Velocity Profile |
| Brand | EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | Nova HT200 |
| Pricing | Available Upon Request |
| Brand | EWIN-TECH |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | PCT-100 |
| Pricing | Available Upon Request |
| Actuation | Pneumatic |
| Pressure Control | Closed-loop regulated |
| Active Area Compatibility | ≤25 cm² |
| Modular Design | Interchangeable flow field plates |
| Optional Modules | In-situ compression monitoring, current distribution mapping, temperature-controlled platens |
| Brand | Exaddon |
|---|---|
| Origin | Switzerland |
| Model | CERES |
| Printing Resolution | Up to 1 µm (typical) |
| Printable Materials | Copper, Gold, Silver, Platinum, Nickel, and other electrodepositable metals |
| Operating Environment | Ambient laboratory conditions (no vacuum or inert gas required) |
| Technology Principle | Localized electrochemical deposition (LECD) with microfluidic ion delivery and nanoscale electrode positioning |
| Brand | Exaddon |
|---|---|
| Origin | United Kingdom |
| Model | CERES |
| Printing Resolution | <1 µm |
| Print Materials | Cu, Au, Ni, Ag, Pt |
| XY Positioning Accuracy | ±250 nm |
| Z Positioning Accuracy | ±5 nm |
| Maximum Build Area (Standard) | 25 × 25 mm |
| Max. Print Speed | 200 µm/s |
| Operating Environment | Ambient Temperature, No Post-Processing Required |
| Core Technology | Template-Free Electrochemical Deposition (ECD) |