Common Laboratory Equipment
Filter
Showing 2821–2850 of 5349 results
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Electronic Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 100 L |
| Speed Range | 0/4–530 rpm (dual-range, microprocessor-controlled) |
| Torque Output | 660 N·cm (max), 6.6 N·m (rated) |
| Motor Type | Brushless DC Motor |
| Temp. Measurement | Integrated PT1000 sensor (–10 to +350 °C, ±0.5 K accuracy, Class A per DIN IEC 751) |
| Interfaces | RS232, USB |
| Display | TFT touchscreen with multilingual UI |
| Safety | Active torque monitoring, automatic stall protection, real-time speed deviation correction, programmable safety cutoff |
| Enclosure Rating | IP40 |
| Dimensions (W×H×D) | 91 × 379 × 231 mm |
| Weight | 5.8 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 200 digital |
| Maximum Stirring Volume | 100 L (H₂O) |
| Speed Range | 0/6–2000 rpm (dual-range, microprocessor-controlled) |
| Motor Type | Brushless DC |
| Input Power | 130 W |
| Output Power | 84 W |
| Max Torque | 200 N·cm (Range I), 40 N·cm (Range II) |
| Speed Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Display | LED, 7-segment |
| Clamp Capacity | 0.5–10 mm |
| Shaft Bore | 10.3 mm (hollow, insertable at standstill) |
| Dimensions | 91 × 274 × 209 mm |
| Weight | 4.6 kg |
| IP Rating | IP42 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| Voltage | 230 V / 100–115 V |
| Frequency | 50/60 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 200 digital |
| Max. Stirring Volume (H₂O) | 100 L |
| Motor Input Power | 130 W |
| Motor Output Power | 84 W |
| Drive Type | Brushless DC Motor |
| Speed Display | LED, 7-segment |
| Speed Range | 0/6–2000 rpm (2 ranges) |
| Max. Viscosity | 100,000 mPa·s |
| Max. Torque (Range I) | 200 N·cm |
| Max. Torque (Range II) | 40 N·cm |
| Speed Control | Electronic, Stepless |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1% (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Chuck Type | Plug-in collet (Ø 10 mm) |
| Chuck Jaw Range | 0.5–10 mm |
| Hollow Shaft ID | 10.3 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 16 mm |
| Extension Arm Length | 220 mm |
| Rated Torque | 2 N·m |
| Housing Material | Cast aluminum with thermoplastic polymer coating |
| Dimensions (W×H×D) | 91 × 274 × 209 mm |
| Weight | 4.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80% RH |
| Protection Class | IP 42 (DIN EN 60529) |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Continuous Operation Capability | Yes |
| Safety Features | Automatic stall detection, overload shutdown, real-time speed deviation correction, error code display |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | EUROSTAR 200 digital |
| Type | Electronic Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 100 L |
| Speed Range | 0/6–2000 rpm (dual-range, microprocessor-controlled) |
| Motor | Brushless DC |
| Max. Torque | 200 N·cm (Range I), 40 N·cm (Range II) |
| Power Input | 130 W |
| Power Output | 84 W |
| Speed Display | LED, 7-segment |
| Speed Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Viscosity | 100,000 mPa·s |
| Shaft Clamping Range | 0.5–10 mm |
| Hollow Shaft Diameter | 10.3 mm |
| IP Rating | IP42 |
| Dimensions (W×H×D) | 91 × 274 × 209 mm |
| Weight | 4.6 kg |
| Operating Ambient | 5–40 °C, ≤80% RH |
| Voltage | 230 V / 100–115 V, 50/60 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 200 P4 control |
| Max. Stirring Volume (H₂O) | 100 L |
| Motor Input Power | 134 W |
| Motor Output Power | 76 W |
| Drive Type | Brushless DC Motor |
| Speed Range I (50/60 Hz) | 4–108 rpm |
| Speed Range II (50/60 Hz) | 16–530 rpm |
| Speed Control | Continuous, Electronic |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1% (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Torque I | 660 N·cm |
| Max. Torque II | 130 N·cm |
| Rated Torque | 6.6 N·m |
| Torque Measurement Deviation | ±60 N·cm (Range I), ±10 N·cm (Range II) |
| Max. Viscosity | 150,000 mPa·s |
| Stirrer Shaft Output Power | 76 W |
| Duty Cycle | 100% continuous operation |
| Clamp Jaw Range | 0.5–10 mm |
| Extension Arm Diameter | 16 mm |
| Extension Arm Length | 220 mm |
| Temperature Measurement | Integrated PT1000 sensor (±0.5 K, DIN EN 60751 Class A) |
| Temp. Range | –10 to +350 °C |
| Temp. Resolution | 0.1 K |
| Timer Range | 1–6000 min |
| Display | TFT, Multilingual |
| Interfaces | RS232, USB |
| IP Rating | IP40 |
| Dimensions (W×H×D) | 91 × 379 × 231 mm |
| Weight | 5.8 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Safety Features | Overload protection, Short-term overload capability, Lockable safety circuit, Error code display |
| Accessories Included | H 67.60 temperature probe, WH 11 wireless controller |
| Remote Control Range | Up to 150 m (site-dependent) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | Eurostar 40 Digital KLC Package |
| Instrument Type | Electric Stirrer |
| Maximum Stirring Volume | 25 L (H₂O) |
| Speed Range | 0/30–2000 rpm |
| Motor Output Power | 84 W |
| Max Torque | 40 N·cm |
| Speed Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Speed Measurement Deviation | ±1% (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max Viscosity | 30,000 mPa·s |
| Clamp Jaw Range | 0.5–10 mm |
| Hollow Shaft Inner Diameter | 11 mm |
| Dimensions (W×H×D) | 86 × 248 × 208 mm |
| Weight | 4.4 kg |
| Operating Temperature | 5–40 °C |
| Relative Humidity Limit | 80 % |
| IP Rating | IP40 |
| Input Voltage | 230 / 115 / 100 V |
| Frequency | 50/60 Hz |
| Motor Type | Brushless DC Motor |
| Continuous Duty Cycle | 100 % |
| Enclosure Material | Cast Aluminum Coating + Thermoplastic Polymer |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Model | EUROSTAR 40 digital |
| Maximum Mixing Volume | 25 L (H₂O) |
| Speed Range | 0/30–2000 rpm |
| Torque Range | 60 N·cm (at ≤200 rpm), 40–60 N·cm (linearly adjustable from 200–2000 rpm) |
| Temperature Operating Range | 5–40 °C |
| Max. Viscosity | 30,000 mPa·s |
| Protection Rating | IP54 |
| Compliance | ISO Class 7/8 Cleanroom Certified |
| Interfaces | USB-C, RS232 |
| Motor Type | Brushless DC |
| Display | LCD with real-time torque trend |
| Safety Features | Auto-stop on stall, torque limit, sudden torque drop detection, key lock |
| Enclosure Material | Anodized aluminum housing with thermoplastic polymer coating |
| Dimensions (W×H×D) | 89 × 237 × 191 mm |
| Weight | 3.8 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 400 control |
| Max. Stirring Volume (H₂O) | 150 L |
| Motor Input Power | 220 W |
| Motor Output Power | 176 W |
| Drive Type | Brushless DC Motor |
| Speed Display | TFT |
| Speed Range | 0/6–2000 rpm |
| Intermittent Operation | Yes |
| Max. Viscosity | 100,000 mPa·s |
| Max. Output Power at Stirring Shaft | 167 W |
| Continuous Duty Cycle | 100 % |
| Max. Torque (Range I) | 400 N·cm |
| Max. Torque (Range II) | 80 N·cm |
| Speed Ranges (50/60 Hz) | I = 6–400 rpm, II = 30–2000 rpm |
| Speed Control | Infinitely Variable |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Clamp Type | Fixed Chuck |
| Shaft Clamp Range | Ø 3–16 mm |
| Hollow Shaft ID | 10.3 mm |
| Hollow Shaft Insertion (Stopped) | Yes |
| Extension Arm Diameter | 16 mm |
| Extension Arm Length | 160 mm |
| Torque Display | Yes |
| Rated Torque | 4 N·m |
| Torque Measurement Deviation (Range I) | ±40 N·cm |
| Torque Measurement Deviation (Range II) | ±12 N·cm |
| Timer | Yes |
| Timer Display | TFT |
| Timer Range | 1–6000 min |
| Temp. Range (with PT1000) | −10 to +350 °C |
| Temp. Resolution | 0.1 K |
| Temp. Accuracy (PT1000, DIN EN 60751 Class A) | ±0.5 K |
| Temp. Sensor Max. Deviation | ≤ ±(0.15 + 0.002× |
| Housing Material | Cast Aluminum Coating / Thermoplastic Polymer |
| Dimensions (W×H×D) | 114 × 345 × 268 mm |
| Weight | 8.8 kg |
| Ambient Operating Temp. | 5–40 °C |
| Relative Humidity | ≤80 % (non-condensing) |
| Protection Rating | IP40 (DIN EN 60529) |
| Interfaces | RS232, USB |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Instrument Input Power | 226 W |
| Included Accessories | H 67.60 Temperature Sensor, WH 11 Wireless Handheld Controller, Support Stand with Extension Arm |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 400 digital |
| Max. Stirring Volume (H₂O) | 150 L |
| Motor Input Power | 220 W |
| Motor Output Power | 176 W |
| Drive Type | Brushless DC Motor |
| Speed Display | LED, 7-segment |
| Speed Range | 0/6–2000 rpm (infinitely variable) |
| Max. Viscosity | 100,000 mPa·s |
| Max. Output Power at Stirring Shaft | 167 W |
| Continuous Duty Cycle | 100 % |
| Max. Torque (Range I) | 400 N·cm |
| Max. Torque (Range II) | 80 N·cm |
| Speed Ranges (50/60 Hz) | I = 6–400 rpm, II = 30–2000 rpm |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Chuck Type | Fixed Clamp |
| Clamp Jaw Range | Ø 3–16 mm |
| Hollow Shaft ID | 10.3 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 16 mm |
| Extension Arm Length | 160 mm |
| Rated Torque | 4 N·m |
| Dimensions (W × H × D) | 114 × 325 × 245 mm |
| Weight | 8.4 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Ingress Protection | IP 42 (DIN EN 60529) |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Device Input Power | 226 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 60 control |
| Stirrer Type | Electronic Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 40 L |
| Speed Range | 0/30–2000 rpm |
| Max. Viscosity | 50,000 mPa·s |
| Max. Torque | 60 N·cm |
| Motor Output Power | 131 W |
| Input Power | 176 W |
| Speed Setting Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Speed Measurement Deviation | ±1% (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Temperature Range (with PT1000 sensor) | –10 to +350 °C |
| Temp. Accuracy | ±0.5 K (DIN IEC 751 Class A) |
| Shaft Clamp Range | 0.5–10 mm |
| Hollow Shaft ID | 11 mm |
| IP Rating | IP40 |
| Dimensions (W×H×D) | 86 × 267 × 230 mm |
| Weight | 4.7 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Interfaces | RS232, USB |
| Display | TFT touchscreen with multilingual support |
| Wireless Control Range | up to 150 m (site-dependent) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 60 control |
| Motor Input Power | 168 W |
| Motor Output Power | 131 W |
| Max. Stirring Volume (H₂O) | 40 L |
| Speed Range | 0/30–2000 rpm |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Viscosity | 50,000 mPa·s |
| Max. Output Power at Shaft | 126 W |
| Max. Torque | 60 N·cm |
| Torque Measurement Deviation | ±6 N·cm |
| Temperature Range (with PT1000) | –10 to +350 °C |
| Temp. Measurement Accuracy | ±0.5 K (DIN EN 60751 Class A) |
| Temp. Sensor Limiting Error | ≤ ±(0.15 + 0.002× |
| Shaft Clamp Range | 0.5–10 mm |
| Hollow Shaft ID | 11 mm |
| Hollow Shaft Insertion (stationary) | Yes |
| Extension Arm Diameter | 16 mm |
| Extension Arm Length | 220 mm |
| Timer Range | 1–6000 min |
| Protection Rating | IP40 (DIN EN 60529) |
| Interfaces | RS232, USB |
| Voltage | 230 V, 50/60 Hz |
| Instrument Input Power | 176 W |
| Dimensions (W×H×D) | 86 × 267 × 230 mm |
| Weight | 4.7 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Display | Multilingual TFT |
| Control Type | Electronic, Continuous (Infinitely Variable) |
| Safety Features | Overload Protection, Lockable Safety Loop, Error Code Display |
| Included Accessories | H 67.60 Temperature Sensor, WH 11 Wireless Controller |
| Motor Type | Brushless DC |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Electronic Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 60 L |
| Speed Range | 0/30–2000 rpm |
| Max. Viscosity | 50,000 mPa·s |
| Max. Torque | 100 N·cm (at ≤200 rpm), 60 N·cm (at 2000 rpm) |
| Torque Accuracy | ±1 N·cm |
| Temp. Monitoring | Yes (PT1000 interface, -10 to 350 °C) |
| IP Rating | IP54 |
| Motor | Brushless DC |
| Communication | USB-C, RS232, Ethernet, Wi-Fi, WLAN |
| Compliance | DIN EN 60529, DIN EN 60751 Class A, CE, RoHS |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 60 digital |
| Stirrer Type | Electric Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 40 L |
| Speed Range | 0/30–2000 rpm |
| Motor Output Power | 126 W |
| Max. Torque | 60 N·cm |
| Speed Control | Continuous (Stepless) |
| Speed Display | LED, 7-segment |
| Speed Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Speed Deviation | ±1% (n > 300 rpm) |
| Max. Viscosity | 50,000 mPa·s |
| Shaft Clamping Range | 0.5–10 mm |
| Hollow Shaft ID | 11 mm |
| Dimensions (W×H×D) | 86 × 248 × 208 mm |
| Weight | 4.4 kg |
| IP Rating | IP42 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| Motor Type | Brushless DC |
| Continuous Duty Cycle | 100 % |
| Input Voltage | 230 / 115 / 100 V |
| Frequency | 50/60 Hz |
| Input Power | 176 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 60 digital |
| Max. Volume (H₂O) | 40 L |
| Motor Input Power | 176 W |
| Motor Output Power | 126 W |
| Drive Type | Brushless DC Motor |
| Speed Range | 0/30–2000 rpm |
| Speed Display | LED, 7-segment |
| Speed Control | Electronic, Continuous |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1% (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Viscosity | 50,000 mPa·s |
| Max. Torque | 60 N·cm |
| Rated Torque | 0.6 N·m |
| Duty Cycle | 100% |
| Shaft Clamping Range | 0.5–10 mm |
| Hollow Shaft ID | 11 mm |
| Hollow Shaft Functionality | Yes (insertion possible at standstill) |
| Support Arm Diameter | 16 mm |
| Support Arm Length | 220 mm |
| Housing Material | Cast Aluminum Coated / Thermoplastic Polymer |
| Dimensions (W×H×D) | 86 × 248 × 208 mm |
| Weight | 3.9 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80% RH |
| Protection Class | IP 42 (per DIN EN 60529) |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Safety Features | Electronic overload protection, stall detection, automatic shutdown, error code display |
| Acoustic Noise Level | Low |
| Design | Compact, benchtop overhead stirrer with integrated microprocessor-based speed regulation and real-time speed feedback loop |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | EUROSTAR 60 digital |
| Instrument Type | Electric Overhead Stirrer |
| Max. Mixing Volume | 60 L (H₂O) |
| Speed Range | 0/30–2000 rpm |
| Max. Viscosity | 50,000 mPa·s |
| Max. Torque (Low Speed) | 100 N·cm |
| Max. Torque (High Speed) | 60 N·cm |
| Torque Measurement Accuracy | ±6 N·cm |
| Display | LCD |
| Interfaces | USB-C, RS232 |
| Protection Rating | IP54 |
| Compliance | ISO Class 7/8 Cleanroom Certified |
| Motor Type | Brushless DC |
| Continuous Duty Cycle | 100% |
| Dimensions (W×H×D) | 89 × 237 × 191 mm |
| Weight | 3.8 kg |
| Ambient Temp. Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Power Supply | 100–240 V, 50/60 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Eurostar Power Control P4/P7 |
| Speed Control | Stepless (0–2000 rpm) |
| Torque Range | Up to 150 N·cm (P4), Up to 300 N·cm (P7) |
| Display | Dual digital display (set speed & actual speed, torque & viscosity estimation) |
| Interface | RS232 |
| Compliance | CE, RoHS, IEC 61000-6-3/6-4 |
| Safety Features | Overload protection, soft-start circuitry, thermal cut-off, non-penetrating shaft design |
| Software Compatibility | labworldsoft® (v5.0+) for remote control, real-time data logging, and audit-trail-enabled operation |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Eurostar Power Control |
| Instrument Type | Digital Overhead Stirrer (Viscometric) |
| Max. Mixing Volume | 40 L |
| Speed Range | 20–2000 rpm |
| Speed Control | Microprocessor-based, Stepless (No Gear Shifting) |
| Torque Monitoring | Yes |
| Interface | RS232 |
| Display | Digital (Set & Actual Speed), Analog Torque Output |
| Safety Features | Electronic Overload Protection, Safe Start-up Logic, Integrated Safety Circuit |
| Drive Design | Penetrating Shaft (Through-Drive), Low-Noise Brushless Motor |
| Compliance | CE, RoHS, IEC 61010-1 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | G-L |
| Maximum Speed | 15,700 rpm |
| Rotor Capacity | 12 × 1.5/2.0 mL tubes |
| Relative Centrifugal Force (RCF) | 16,500 × g |
| Acceleration Time to Max Speed | 17 s |
| Deceleration Time from Max Speed | 18 s |
| Speed Accuracy | ±100 rpm |
| Speed Deviation | ±2.5% |
| Timer Range | Yes (LED display) |
| Unbalance Detection | Yes |
| Quick-Stop Function | Yes |
| Auto-Lid Opening | Yes |
| Safety Lid Interlock | Yes |
| Noise Level | 55 dB(A) |
| Dimensions (W × D × H) | 200 × 140 × 280 mm |
| Weight | 3.9 kg |
| Operating Ambient Temperature | +5 to +40 °C |
| Max. Relative Humidity | 80% (non-condensing) |
| Protection Class | IP20 (DIN EN 60529) |
| Power Supply | 220–230 V, 50/60 Hz |
| Input Power | 92 W (operational), 3 W (standby) |
| USB Interface | Yes |
| Display Unit Conversion | rpm ↔ RCF |
| Motor Type | Brushless DC |
| Rotor Material | Anodized aluminum alloy |
| Compliance | CE, IEC 61010-1, IEC 61010-2-020 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | Benchtop Centrifuge |
| Speed Range | 800 – 15,700 rpm |
| Max RCF | 16,500 × g |
| Max Capacity | 12 × 1.5/2.0 mL tubes |
| Rotor Compatibility | Fixed-angle rotor (autoclavable at 121 °C, 2 bar) |
| Dimensions (W×D×H) | 200 × 140 × 280 mm |
| Weight | 3.9 kg |
| Power Supply | 220–230 V / 115 V / 100 V, 50/60 Hz |
| Input Power | 92 W (operational), 18 W (standby) |
| Protection Class | IP20 (DIN EN 60529) |
| Operating Environment | +5 to +40 °C, ≤80% RH |
| Safety Features | Lid interlock, imbalance detection, rapid brake, automatic lid opening |
| Display | LED, 7-segment |
| Control Interface | Membrane keypad with RPM/RCF toggle |
| USB Port | Yes |
| Timer | Yes |
| Rotor Auto-Recognition | No |
| Balance Monitoring | Yes |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Import |
| Model | HABITAT cell |
| Vessel Material | Borosilicate Glass |
| Working Volume Range | 0.5–10 L (configurable via vessel options) |
| Gas Control | 4-channel MFCs (Air, O₂, N₂, CO₂) |
| Flow Range | 0–2000 cc/min per channel |
| Peristaltic Pumps | 4 × Watson Marlow 114DV heads |
| Stirring Speed | 1–2200 rpm |
| Temperature Control | Heating blanket (250 W) or external thermostat interface |
| pH Range | 0–14 |
| Accuracy | ±0.02 pH |
| DO Range | 0–200 %sat |
| Resolution | 0.01 %sat |
| Accuracy | ±0.3 %sat |
| Temp Control Range | 5–60 °C (heating blanket) |
| Data Storage | 32 GB internal SSD |
| Compliance Options | FDA 21 CFR Part 11–compliant software module available |
| Enclosure Rating | IP20 |
| Power Input | 100–240 V, 50/60 Hz |
| Max Power Consumption | 1100 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Works GmbH & Co. KG |
| Product Type | Photobioreactor System |
| Model | HABITAT photo cell |
| Construction Material | Borosilicate Glass (DIN ISO 3585) |
| Regulatory Compliance | CE, RoHS, IP20 |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Dimensions (W×D×H) | 224 × 624 × 405 mm |
| Weight | 14 kg |
| Operating Ambient | 5–40 °C, ≤80% RH (at 31 °C), linearly decreasing to 50% at 40 °C |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | HABITAT Photo Cell CCT |
| Instrument Classification | Photobioreactor / Lab-Scale Controlled Bioreactor |
| Vessel Material | Borosilicate Glass (DIN ISO 3585) |
| Dimensions (W×D×H) | 224 × 624 × 405 mm |
| Weight | 14 kg |
| Power Supply | 100–240 V, 50/60 Hz |
| Max. Input Power | 1100 W |
| IP Rating | IP20 |
| Environmental Operating Conditions | 5–40 °C, ≤80% RH (at 31 °C), linearly decreasing to 50% RH at 40 °C |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | HB digital |
| Price | ¥15,300 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | HB eco |
| Price | ¥10,200 |
| Heating Power Output | 1400 W |
| Temperature Range | Ambient to 99 °C |
| Temperature Control | Analog Knob |
| Temp. Control Accuracy | ±1 K |
| Temperature Fluctuation (3 L water at 99 °C) | ±1 K |
| Avg. Absolute Deviation (3 L water at 99 °C) | ±2 K |
| Max. Bath Capacity | 4 L |
| Minimum Fill Level | 60 mm |
| Wetted Materials | Stainless Steel 1.4404 (AISI 316L) |
| Fixed Safety Cut-off | 109 °C (DIN 12876 Class I) |
| External Diameter | 257 mm |
| Internal Diameter | 225 mm |
| External Height | 190 mm |
| Internal Depth | 130 mm |
| Overall Dimensions (W × D × H) | 330 × 190 × 325 mm |
| Weight | 3.9 kg |
| Ambient Operating Temperature | 5–40 °C |
| Max. Relative Humidity | 80 % |
| Ingress Protection | IP21 (DIN EN 60529) |
| USB Interface | Yes |
| Voltage | 200–240 V / 100–120 V |
| Frequency | 50/60 Hz |
| Rated Input Power | 1450 W |
| Standby Power Consumption | 3 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Heating Circulator |
| Circulation Mode | Internal & External |
| Temperature Control | Heating-Only |
| Bath Volume | 8–11 L |
| Temperature Range | 10–200 °C (extended to 250 °C with oil) |
| Temperature Stability | ±0.02 K |
| Input Power | 2650 W |
| Supply Voltage | 230 V AC, 50/60 Hz |
| Protection Class | IP21 |
| Compliance | DIN 12876 Class III (FL), EN 60529, CE |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported |
| Model | HBC 10 control |
| Instrument Type | Water/Oil Bath Circulator |
| Circulation Mode | Internal & External |
| Temperature Control | Heating-Only |
| Bath Volume | 8–11 L |
| Temperature Range | 10–200 °C |
| Temperature Stability | ±0.01 K |
| Input Power | 2650 W |
| Supply Voltage | 230 V |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Type | HBC 5 basic |
| Temperature Range | 10–200 °C |
| Temperature Stability | ±0.02 K |
| Bath Volume | 4.5–6.5 L |
| Heating Power | 2650 W |
| Voltage | 230 V AC, 50/60 Hz |
| Circulation Type | Internal & External |
| Protection Class | IP21 |
| Compliance | DIN 12876 Class III (FL), DIN EN 60529 |
| Interface | RS232 & USB |
| Display | Large LED with dual temperature readout (process & safety) |
| Pump Type | Integrated pressure/suction pump |
| Max. Pressure | 0.61 bar |
| Max. Suction | 0.45 bar |
| Max. Flow Rate | 31 L/min at 0 bar backpressure |
| Cooling Coil | Integrated |
| Safety Features | Dual PT100/PT1000 sensors, adjustable safety limit (0–260 °C), visual & audible alarms, overpressure protection, secondary thermal cutoff |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | HBC 5 control |
| Instrument Type | Water/Oil Bath Circulator |
| Circulation Mode | Internal & External |
| Temperature Control | Heating-Only |
| Bath Volume | 4.5–6.5 L |
| Temperature Range | 10–250 °C |
| Temperature Stability | ±0.01 K |
| Input Power | 2650 W |
| Supply Voltage | 230 V |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | HBR 4 control |
| Heating Power | 1000 W |
| Max. Bath Volume | 4 L |
| Temp. Range | RT to 200 °C |
| Temp. Control Accuracy | ±1 K (water, 3 L @ 90 °C) / ±2 K (silicone oil, 3 L @ 150 °C) |
| Stirring Speed Range | 150–800 rpm |
| Stirring Motor Output | 1 W |
| Safety Cut-off Range | 50–210 °C |
| Protection Class | DIN 12877 Class II |
| IP Rating | IP20 |
| Dimensions (W×D×H) | 340 × 250 × 340 mm |
| Weight | 4.4 kg |
| Power Supply | 230/115/100 V, 50/60 Hz |
| Interface | RS 232 |
| External Sensor Support | PT1000 |
| Material (Wetted Parts) | Stainless Steel 1.4301 (AISI 304) |
| Minimum Fill Level | 20 mm |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | HBR 4 control |
| Heating Power | 1000 W |
| Max. Bath Volume | 4 L |
| Temp. Range | RT to 200 °C |
| Temp. Control Accuracy | ±1 K (water, 90 °C) / ±2 K (silicone oil, 150 °C) |
| Stirring Speed Range | 150–800 rpm |
| Safety Temp. Range | 50–210 °C |
| Display | Digital LCD (set temp., actual temp., safety temp., speed) |
| Interface | RS 232 |
| External Sensor Support | PT1000 |
| Protection Class | IP20 |
| Dimensions (W×D×H) | 340 × 250 × 340 mm |
| Weight | 4.4 kg |
| Power Supply | 230/115/100 V, 50/60 Hz |