Constant Temp/Heating/Drying Equipment
Filter
Showing 541–570 of 948 results
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | XZ-141-III |
| Instrument Type | Vacuum Oven |
| Temperature Range | RT+10–250 °C |
| Temperature Fluctuation | ±0.5 °C |
| External Dimensions | Triple-stack configuration |
| Internal Chamber Dimensions | 360 × 600 × 620 mm (W×D×H) |
| Temperature Resolution | 0.1 °C |
| Operating Ambient Temperature | RT+10–250 °C |
| Chamber Material | 304 Stainless Steel |
| Heating Method | External Four-Side Radiant Heating |
| Temperature Uniformity | ±1 °C |
| Ultimate Vacuum Level | ≤133 Pa |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Category | Domestic |
| Model | XZ-91-II |
| Instrument Type | Vacuum Drying Oven |
| Temperature Range | RT+10 to 250°C |
| Temperature Fluctuation | ±0.5°C |
| Internal Chamber Dimensions | 450 × 450 × 450 mm |
| Temperature Resolution | 0.1°C |
| Operating Ambient Temperature | 5–45°C |
| Inner Chamber Material | 304 Stainless Steel |
| Heating Method | External (Four-Side) Radiant Heating |
| Temperature Uniformity | ±1°C |
| Ultimate Vacuum Level | ≤133 Pa |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | XZS-50-II |
| Instrument Type | Vacuum Oven |
| Temperature Range | RT+10 to 250 °C |
| Temperature Uniformity | ±0.5 °C |
| Chamber Dimensions (per chamber) | 415 × 370 × 345 mm (W×D×H) |
| Temperature Resolution | 0.1 °C |
| Operating Ambient Temperature | 5–45 °C |
| Inner Chamber Material | 304 Stainless Steel |
| Heating Method | Forced-Air Circulation (External Heating) |
| Ultimate Vacuum Level | ≤133 Pa |
| Cabinet Configuration | Stacked Dual-Chamber Vertical Design |
| Brand | Duling |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | PRC |
| Model | MDC-5 |
| Pricing | Available Upon Request |
| Dimensions | 400 × 300 mm |
|---|---|
| Heating Power | 3 kW |
| Max Operating Temperature | 400 °C |
| Input Voltage | AC 220 V / 50 Hz |
| Construction | Cold-rolled steel housing with powder coating |
| [Origin | China |
|---|---|
| Type | Forced-Air Convection Drying Oven |
| Models | SD101-003DB / SD101-005DB / SD101-1DB / SD101-2DB |
| Chamber Volume | 27 L to 125 L |
| Temperature Range | Ambient +20 °C to 200 °C |
| Temperature Uniformity | ±2.5% (per JB/T 5520–1991) |
| Temperature Fluctuation | ±0.5 °C |
| Control System | PID Digital Temperature Controller |
| Safety Features | Independent Over-Temperature Cut-Off & Short-Circuit Protection |
| Construction | Vertical Configuration with Stainless Steel Interior Chamber |
| Power Input | 0.7 kW to 1.3 kW] |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | PSL |
| Temperature Range | –40 °C to 0 °C / –80 °C to 0 °C / –80 °C to 20 °C |
| Temperature Stability | ±0.5 °C (PSL-1400) / ±1.0 °C (PSL-1810, PSL-2000) |
| Stirring Speed | 100–800 rpm |
| Heating Power | 250 W / 450 W / 750 W |
| Cooling Capacity | Air-Cooled Compressor System (R404A, R507A/R23 Dual-Circuit) |
| Tank Material | SUS304 Stainless Steel |
| Capacity | 2.1 L / 3.5 L / 8 L |
| Stirring Motor Output | 15 W / 25 W / 25 W |
| Safety Features | Leakage Current Protection, Overcurrent Protection, Overheating Prevention, Compressor High-Pressure Cut-off, Sensor Open-Circuit Detection, Self-Diagnostic Function (Heater Fault, Sensor Anomaly, Temp Deviation Alert), Compressor Delay Start |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | PSL-1810 |
| Temperature Range | −80 °C to 0 °C |
| Temperature Stability | ±1 °C |
| Stirring Speed | 100–800 rpm |
| Heating Power | 450 W |
| Cooling System | Dual-compressor, air-cooled |
| Refrigerants | R507A (primary stage), R23 (secondary stage) |
| Bath Capacity | 3.5 L |
| Bath Chamber Dimensions | Φ180 × 140 H mm (SUS304 stainless steel) |
| Max. Vessel Size | Φ95 mm × 300 mL |
| External Dimensions | 530 W × 450 D × 520 H mm |
| Weight | ~70 kg |
| Control Method | PID temperature control |
| Display & Setting | Digital LED display with manual keypad input |
| Safety Functions | Leakage current protection, overcurrent cutoff, heater over-power prevention, compressor high-pressure cutoff, relay overload protection, self-diagnostic system (heater fault, sensor failure, high/low temperature alarm), compressor time-delay startup |
| Auxiliary Function | Auto power-on/off scheduling |
| Stirrer Output | 25 W |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | SD-1000 |
| Inlet Temperature Range | 40–200 °C |
| Temperature Control Accuracy | ±1 °C |
| Max. Evaporation Rate | 1500 mL/h |
| Drying Air Flow | 0.2–0.75 m³/min |
| Atomizing Air Pressure | 20–245 kPa |
| Feed Pump Flow Rate | 150–1700 mL/h |
| Stirrer Speed | 100–1000 rpm |
| Sample Vessel Capacity | 50 mL–2 L |
| Heater Power | 3 kW |
| Nozzle Type | Twin-fluid nozzle (standard orifice ID: 0.4 mm) |
| Construction | Borosilicate glass evaporation chamber & cyclonic separator |
| Powder Collection Vessel | 600 mL borosilicate glass |
| Safety Features | Real-time diagnostics for inlet/outlet temperature deviation, airflow anomaly, heater fault, and feed pressure failure |
| Auto-cleaning Interval | Programmable 1–20 min cycles |
| Analog Output | 0–10 mV (inlet temp, outlet temp, air flow) |
| Dimensions (W×D×H) | 700 × 620 × 1500 mm |
| Weight | ~110 kg |
| Brand | EYELA |
|---|---|
| Origin | Japan |
| Model | SD-1010 |
| Evaporation Capacity | Up to 1500 mL/h |
| Inlet Air Temperature Range & Accuracy | 40–200 °C (±1 °C) |
| Hot Air Flow Rate | 0.2–0.75 m³/min |
| Atomizing Air Pressure | 20–250 kPa (0.2–2.5 kgf/cm²) |
| Sample Stirring Speed & Volume | 100–1000 rpm, 50 mL–2 L (water equivalent) |
| Feed Pump Flow Rate | 150–1700 mL/h |
| Heater Power | 3 kW |
| Atomizer Type | Dual-fluid nozzle (standard orifice ID: 0.71 mm) |
| Collection Vessel | Borosilicate glass, 600 mL capacity |
| Dimensions & Weight | 700 W × 620 D × 1500 H mm, approx. 110 kg |
| Power Supply | AC 220 V, single-phase, 50/60 Hz, 21 A, 4.2 kVA |
| Brand | Faithful |
|---|---|
| Origin | Hebei, China |
| Model | 98-II-C |
| Capacity | 50 mL |
| Max Surface Temperature | 450 °C |
| Temperature Control Range | Ambient +20 °C to 250 °C |
| Heating Element | Nickel-Chromium Alloy Wire |
| Insulation | High-Purity Alumina-Silica Ceramic Fiber (CE Certified) |
| Housing | Cold-Rolled Steel with Epoxy Powder Coating |
| Power Rating | 0.08 kW |
| Voltage | 200–240 V AC |
| Net Weight | 2.5 kg |
| Dimensions (Ø × H) | 220 mm × 165 mm |
| Temperature Sensor | PT100 Platinum Resistance Thermometer with Adjustable Mount |
| Controller Type | PID-Based Digital Temperature Controller with LED Display |
| Compliance | CE-marked insulation material, RoHS-compliant construction |
| Brand | Faithful |
|---|---|
| Capacity | 10000 mL |
| Heating Method | Surface conduction via Ni-Cr resistance wire |
| Max Surface Temperature | 450 °C |
| Temperature Control Range | Ambient +20 °C to 250 °C |
| Stirring Speed Range | 0–1600 rpm |
| Temperature Sensor | PT100 with adjustable sensor holder |
| Heating Power | 2.5 kW |
| Motor Power | 0.01 kW |
| Voltage | 200–240 V AC |
| Outer Shell | Cold-rolled steel with epoxy coating |
| Insulation | High-purity alumina-silica ceramic fiber + PTFE-coated fiberglass |
| Compliance | CE-certified |
| Net Weight | 16 kg |
| Overall Dimensions (Ø × H) | 470 mm × 340 mm |
| Brand | France Etuves |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Manufacture | China |
| Model | XUE490 |
| Instrument Type | Precision Drying Oven |
| Temperature Range | 30°C to 300°C |
| Temperature Uniformity | ±0.5°C |
| External Dimensions | 864 × 1092 × 1294 mm (W × D × H) |
| Internal Chamber Dimensions | 700 × 700 × 1000 mm (W × D × H) |
| Chamber Material | Stainless Steel (AISI 304) |
| Heating Method | Forced-Air Convection with Dual-Directional Fan System |
| Brand | Froilabo |
|---|---|
| Origin | France |
| Model | AC 60 / AC 120 / AC 240 |
| Temperature Range | Ambient +5°C to 250°C |
| Temperature Uniformity | ≤ ±0.5°C at 70°C, ≤ ±1.2°C at 105°C |
| Temperature Stability | ≤ ±0.2°C at 150°C, ≤ ±0.4°C at 250°C |
| Display Resolution | 0.1°C |
| Chamber Volume | 58 L / 117 L / 230 L |
| Heating Power | 1000 W / 1000 W / 2000 W |
| Voltage | 230 V / 50 Hz |
| Internal Dimensions (W×D×H, mm) | 400×370×390 / 500×470×500 / 500×470×980 |
| External Dimensions (W×D×H, mm) | 522×540×640 / 622×640×740 / 622×640×1236 |
| Net Weight | 39 kg / 53 kg / 79 kg |
| Max. Air Exchange Rate | 50 / 35 / 35 × chamber volume per hour |
| Shelf Load Capacity (per shelf / total) | 20 kg / 50 kg / 20 kg / 70 kg / 20 kg / 90 kg |
| Shelf Quantity | 2 standard shelves |
| Shelf Grid Count | 21 / 29 / 62 |
| Shelf Size (mm) | 380×320 / 480×430 / 480×430 |
| Door | Double-glazed insulated glass with silicone gasket |
| Interior Material | AISI 304 stainless steel |
| Exterior Finish | Epoxy-polyester powder coating |
| Control System | PID digital temperature controller with over-temperature safety cut-off |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GR 1300/13 |
| Quotation | Upon Request |
| Max Temperature | 1300 °C |
| Heating Length | 1300 mm |
| Heating Zones | 6 independent zones (each 160 mm) |
| Max Achievable Axial Temperature Gradient | 400 °C |
| Internal Dimensions (W×D×H) | 1300 × 100 × 60 mm |
| External Dimensions (W×D×H) | 1660 × 740 × 1345 mm |
| Power Rating | 18 kW |
| Electrical Supply | 3-phase |
| Net Weight | 300 kg |
| Heating Method | Radiant heating via resistance wire wound on ceramic support tubes |
| Loading Access | Top or front door |
| Optional Accessory | Ceramic fiber partition boards for zone isolation |
| Brand | Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DRT-SX 3000 mL |
| Price | Upon Request |
| Power Supply | 220 V / 50 Hz |
| Rated Power | 650 W (typical for 3000 mL capacity) |
| Temperature Stability | ±1 °C |
| Operating Temperature Range | Ambient to 300 °C |
| Insulation Resistance | >500 MΩ·cm |
| Control System | Microcontroller-based PID with dual thermocouple feedback (internal & external) |
| Safety Features | Overcurrent protection, thermal cut-off |
| Brand | The Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SY-200-200 |
| Circulation Mode | Internal & External Loop |
| Temperature Control | Heating-Only |
| Bath Volume | 22 L |
| Temperature Range | 5–200 °C |
| Temperature Stability | ±0.5 °C |
| Power Supply | 3-phase, 380 V, 50 Hz |
| Cooling Interface | Dedicated Inlet/Outlet for External Cooling Water |
| Safety Features | Overtemperature Alarm, Overcurrent Protection, Overload Protection |
| Control Method | PID Digital Temperature Control |
| Display | LCD Panel with Real-Time Temperature Readout |
| System Design | Fully Sealed Closed-Loop Circulation |
| Brand | Great Wall |
|---|---|
| Origin | Henan, China |
| Model | SY-50 |
| Temperature Range | Ambient +5 °C to 200 °C |
| Temperature Stability | ±0.5 °C |
| Bath Volume | 20 L |
| Max Flow Rate | 42 L/min |
| Max Pressure | 2.8 bar |
| Circulation Port | 3/4" NPT |
| Heating Power | 3 kW |
| Power Supply | 220–240 V~, 50 Hz |
| Dimensions (W×D×H) | 430 × 690 × 1075 mm |
| Weight | 60 kg |
| Ambient Operating Conditions | 5–40 °C, ≤60% RH |
| Brand | CZGY |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GY-TGX1 |
| Temperature Range | 35 ± 5 °C |
| Temperature Uniformity | ±1 °C |
| External Dimensions | 1140 × 450 × 1620 mm |
| Internal Chamber Configuration | 24 independent stainless-steel sample compartments (each 200 × 300 × 120 mm) |
| Chamber Material | 304 Stainless Steel |
| Heating Method | Electric resistive heating |
| Airflow System | Dual-stage purified & dehumidified forced convection |
| Power Supply | 220 V, 50 Hz |
| Rated Power | 300 W |
| Airflow Capacity | 240 L/min |
| Max Sample Load per Compartment | 1 kg |
| Relative Humidity Limit for Operation | ≤60% RH |
| Brand | Harry Gestigkeit |
|---|---|
| Origin | Germany |
| Model | SVD95/P |
| Power | 2500 W |
| Voltage | 220 V |
| External Dimensions | 450 × 310 × 180 mm |
| Maximum Temperature | 950 °C |
| Heating Time (RT → 950 °C) | < 5 min |
| Crucible Capacity | 8 × Ø34 mm or up to 4 × Ø50 mm |
| Ashing Bed Length | 400 mm |
| Timer Range | 0–120 min with audible alarm |
| Safety Interlock | Lid-activated power cutoff |
| Construction Material | Grade G stainless steel |
| Compliance | CE-marked, designed for ISO 562 / ASTM D3174 / AOAC 942.05 ash content determination |
| Brand | HC |
|---|---|
| Origin | Jiangsu, China |
| Model | MINIB-100P |
| Temperature Range | Ambient +5°C to 100°C |
| Temperature Accuracy | ≤ ±0.3°C |
| Heating Time | ≤6 min (20°C → 56°C) |
| Dimensions | 145 × 113 × 110 mm |
| Net Weight | 0.5 kg |
| Display Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±0.3°C |
| Stability | ±0.3°C |
| Timer Range | 1 min – 99 h |
| Power Supply | AC 100–240 V, 50–60 Hz |
| Optional Modules | A (Φ10 mm, 15 wells), B (Φ12 mm, 12 wells), C (Φ15 mm, 8 wells), D (Φ16 mm, 8 wells), E (Φ12 mm conical bottom, 14 wells, compatible with Sihuan BI), F (Φ9 mm, 18 wells) |
| Brand | Tianjin HengAo |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HGT-2B |
| Heating Blocks | 1 or 2 (configurable) |
| Temperature Control Range | Ambient +5 °C to 150 °C |
| Temperature Accuracy | ±0.1 °C |
| Control Method | Dual-line 4-digit LED display |
| Regulation Algorithm | PID |
| Safety Features | Overheat protection, PTC heating element |
| Power Supply | 200 W |
| Dimensions (L×W×H) | 400 mm × 200 mm × 120 mm |
| Weight | 5 kg |
| Block Configurations | 12–36 wells (customizable) |
| Brand | Tianjin HengAo |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HPT-80 |
| Pricing | Upon Request |
| Heating Power | 500 W |
| Dimensions (L×W×H) | 350 × 470 × 85 mm |
| Temperature Control | PID-regulated digital thermostatic system |
| Display | LED digital display |
| Timer Function | Electronic programmable timer |
| Heating Uniformity | Optimized chamber geometry and immersion heater design for ±0.3 °C thermal stability across working volume |
| Brand | Tianjin HengAo |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Equipment Type | Immersion Constant-Temperature Bath |
| Circulation | Non-Circulating |
| Heating Only | Yes |
| Bath Capacity | 10 L |
| Temperature Range | Ambient to 100 °C |
| Temperature Stability | ±1 °C |
| Brand | Herrytech |
|---|---|
| Origin | Shanghai, China |
| Model | YQ-M4D |
| Temperature Control Accuracy | ±0.1 °C (display resolution) |
| Bath Volume | 10 L |
| Heating Power | 1000 W |
| External Dimensions (W×D×H) | 760×230×185 mm |
| Working Chamber Dimensions (W×D×H) | 600×150×100 mm |
| Temperature Range | RT+5 to 99.9 °C |
| Temperature Uniformity | ±0.5 °C |
| Net Weight | 8.2 kg |
| Brand | CZGY |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HH-3B |
| Power Supply | 220 V AC, 50 Hz |
| Bath Capacity | 4 × (Φ16 cm × 10 cm depth) |
| Heating Power | 4 × 300 W |
| Temperature Range | Ambient to 100 °C |
| Temperature Accuracy | ±0.5 °C |
| Timer Range | 0–999 min |
| Construction | Stainless Steel Interior, Cold-Rolled Steel Exterior with Epoxy Powder Coating |
| Display | 3 Independent LCD Panels (One per Well) |
| Brand | CZGY |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HH-4Q |
| Power Supply | 220 V AC, 50 Hz |
| Chamber Dimensions (per well) | Ø16 cm × 10 cm depth (4 wells) |
| Heating Power | 300 W × 4 independent heating zones |
| Temperature Range | Ambient to 100 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Timer Range | 0–999 minutes |
| Construction | Stainless steel inner tank, cold-rolled steel outer shell with epoxy powder coating |
| Display | Three independent LCD panels for real-time monitoring |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | BFT® |
| Temperature Range | –5 to 80 °C (typical operational range for beer aging: 0–60 °C) |
| Bath Opening Dimensions (W×D) | 350 × 410 mm |
| Bath Depth | 270 mm |
| Heating Power | 2.0 kW |
| Cooling Capacity at 20 °C | 1.2 kW |
| Overall Dimensions (W×D×H) | 460 × 710 × 911 mm |
| Construction | Full stainless steel (AISI 316L wetted parts) |
| Controller | Pilot ONE with 7″ color touchscreen, graph-based real-time temperature profiling, 11-language UI, programmable calendar/time/date scheduler, overtemperature & low-level safety cutoffs |
| Safety Class | DIN 12876-1 Class III / FL (suitable for flammable liquids) |
| Pump System | High-pressure circulation pump + absorption chiller circuit |
| Interfaces | RS232, integrated Pt100 Class A sensor (±0.1 °C accuracy) |
| Cooling Type | Available in water-cooled and air-cooled configurations |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model | CC-K6, CC-K6s, KISS K6, KISS K6s |
| Temperature Range | –25 °C to +200 °C |
| Heating Power | 1.6–2.1 kW |
| Cooling Power (at 20 °C) | 0.72 kW (CC-K6), 0.25 kW (KISS K6), 0.40 kW (CC-K6s), 0.26 kW (KISS K6s) |
| Bath Volume | 4.5 L |
| Bath Opening Dimensions | 140 × 120 mm |
| Bath Depth | 150 mm |
| Pump Flow Rate (Pressure/Suction) | up to 27 L/min @ 0.4 bar / 22 L/min @ 0.15 bar (CC-K6) |
| External Circulation Interface | Yes |
| Temperature Stability | ±0.02 K (CC series), ±0.05 K (KISS series) |
| Refrigerant | Natural (R744 / CO₂ or R290 / propane, per model configuration) |
| Safety Class | DIN 12876 Class III / FL (flammable liquid compatible) |
| Controller | Pilot ONE with 7″ capacitive touchscreen, 11-language UI, RS232 interface, Pt100 sensor input, 2-point calibration, calendar-based scheduling, overtemperature & low-level protection |
| Brand | Huber |
|---|---|
| Origin | Germany |
| Model Range | CC-208B, CC-212B, CC-215B, CC-220B, CC-225B, KISS 208B, KISS 212B, KISS 215B, KISS 220B, KISS 225B |
| Temperature Range | −30 °C to +200 °C |
| Heating Power | 1.5–2.1 kW |
| Bath Volume | 7.5–23.5 L |
| Bath Depth | 150–200 mm |
| Opening Dimensions (W×D) | 230×127 mm to 290×329 mm |
| Temperature Stability | ±0.02 K (CC series), ±0.05 K (KISS series) |
| Pressure Pump Flow Rate | 27 L/min @ 0.72 bar (CC), 14 L/min @ 0.25 bar (KISS) |
| Suction Pump Flow Rate | 10.5 L/min @ 0.7 bar (CC & KISS) |
| External Dimensions (W×D×H) | 290×350×375 mm to 350×555×425 mm |
| Construction | AISI 304 stainless steel bath tank |
| Cooling Requirement | External chiller required for operation below ambient or at sustained low temperatures |