Constant Temp/Heating/Drying Equipment
Filter
Showing 631–660 of 3139 results
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | NF10-45 |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Operating Temperature | 1000 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 2.5 kW |
| Heating Time to Max Temp | 50 min |
| Heating Element Material | Nickel-Chromium Alloy Wire |
| Internal Chamber Dimensions (W×D×H) | 300 mm × 500 mm × 300 mm |
| Nominal Chamber Volume | 45 L |
| Control System | Microcomputer-Based PID Controller with Digital LED Display |
| Programmable Ramp/Soak Capability | 30-Stage (P-Series Optional) |
| Safety Features | Dual-Level Over-Temperature Protection, Door-Interlocked Power Cut-off, Real-Time Voltage/Current Monitoring, Power-Failure Memory Retention |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | NF12-16C |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 8000 W |
| Internal Chamber Dimensions (W×D×H) | 250 mm × 400 mm × 160 mm |
| Nominal Volume | 16 L |
| Heating Element Material | Nickel-Chromium Alloy |
| Control System | Programmable PID Controller (30-Stage Ramp/Soak Profile) |
| Safety Features | Dual-Stage Over-Temperature Protection, Door-Interlocked Power Cut-off, Real-Time Voltage/Current Monitoring, Auto-Restart After Power Recovery |
| Insulation | Refractory Brick Lining with High-Density Ceramic Fiber Backup |
| Compliance | Designed for ASTM E1112, ISO 7888, and GLP-compliant thermal processing workflows |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | NF12-30 |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 12,000 W |
| Heating Time to Max Temp | ≤60 min |
| Heating Element | Nickel-Chromium Alloy Wire |
| Internal Chamber Dimensions (W×D×H) | 300 mm × 500 mm × 200 mm |
| Nominal Volume | 30 L |
| Control System | Microprocessor-Based PID Controller with Digital Display |
| Programmable Ramp/Soak Capability | 30-Stage (P-Series Optional) |
| Safety Features | Dual-Stage Over-Temperature Protection, Door-Interlocked Power Cut-off, Real-Time Voltage/Current Monitoring,断偶/Phase-Loss/Overheat Alarms |
| Insulation | Refractory Brick Lining with High-Density Ceramic Fiber Backup |
| Exterior Finish | Phosphate Conversion Coating + High-Temp Epoxy Powder Coating |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | NF12-60C |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Rate to Max Temp | ≤60 min |
| Heating Element | Nickel-Chromium Alloy Wire |
| Internal Chamber Dimensions (W×D×H) | 400 × 500 × 300 mm |
| Nominal Volume | 60 L |
| Control System | Programmable PID Controller (30-Stage Ramp/Soak) |
| Power Supply | AC 220 V / 380 V, 50 Hz |
| Safety Features | Dual-Stage Over-Temperature Protection, Door-Interlocked Power Cut-off, Real-Time Voltage/Current Monitoring,断电记忆功能 (Power-Failure Memory) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | NWS-8-20 |
| Instrument Type | Water Bath / Oil Bath |
| Temperature Control | Heating-Only |
| Bath Volume | 20 L |
| Temperature Range | RT +5°C to 100°C |
| Temperature Stability | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Input Power | 2000 W |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Vacuum Drying Oven |
| Model | PFA-30GC-II |
| Temperature Range | RT+10–150 °C |
| Temperature Uniformity | Not specified (consult technical support) |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Vacuum Degree | ≤133 Pa |
| Inner Chamber Dimensions | 320 × 320 × 300 mm (W×D×H) |
| Inner Chamber Material | PFA-coated stainless steel |
| Heating Method | External heating |
| Operating Ambient Temperature | +5–40 °C above ambient |
| Compliance | Designed for GLP/GMP-aligned environments |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | PFA-30VC-II |
| Instrument Type | Vacuum Oven |
| Temperature Range | RT+10°C to 150°C |
| Temperature Uniformity | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Vacuum Level | ≤133 Pa |
| Interior Dimensions (W×D×H) | 320×320×300 mm |
| Chamber Material | PFA-coated 316L stainless steel interior |
| Heating Method | Forced-air convection |
| Operating Ambient Temperature | RT+5°C to 45°C |
| Compliance | Configurable for GLP/GMP environments with IQ/OQ/PQ documentation support |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | PFA-90GF |
| Instrument Type | Vacuum Oven |
| Temperature Range | RT+10–150 °C |
| Temperature Fluctuation | ±0.5 °C |
| Interior Dimensions | 450 × 450 × 450 mm |
| Temperature Resolution | 0.1 °C |
| Operating Ambient Temperature | +5–40 °C |
| Chamber Lining Material | PFA (Perfluoroalkoxy) Coating |
| Heating Method | External Heating |
| Vacuum Level | ≤133 Pa |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | PFA-90GM |
| Instrument Type | Vacuum Oven |
| Temperature Range | RT+10°C to 250°C |
| Temperature Uniformity | Not specified |
| Temperature Fluctuation | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Vacuum Level | ≤133 Pa |
| Inner Chamber Dimensions | 450 × 450 × 450 mm (W×D×H) |
| Inner Chamber Material | 316L Stainless Steel with PFA Coating |
| Heating Method | Optional External or Internal Heating |
| Operating Ambient Temperature | RT+5°C to 45°C |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | PFA-90VC-II |
| Instrument Type | Vacuum Oven |
| Temperature Range | RT+10 to 150 °C |
| Temperature Uniformity | ±1 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Vacuum Level | ≤133 Pa |
| Internal Chamber Dimensions | 450 × 450 × 450 mm (W×D×H) |
| Chamber Material | PFA-coated 316L stainless steel |
| Heating Method | Forced-air convection heating |
| Operating Ambient Temperature | 5–40 °C |
| Compliance Options | IQ/OQ/PQ documentation available |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | PRO-1822 |
| Instrument Type | Vacuum Oven |
| Temperature Range | RT+10°C to 300°C |
| Temperature Uniformity | ±0.1°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Vacuum Level | ≤133 Pa |
| Chamber Material | ASTM A240 S31603 Stainless Steel |
| Heating Method | Forced Air Circulation |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Vacuum Oven |
| Temperature Range | RT+10 to 120 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Vacuum Level | ≤133 Pa |
| Internal Chamber Dimensions (W×D×H) | 320 × 320 × 300 mm |
| Chamber Volume | 30 L |
| Chamber Material | PTFE-coated stainless steel interior |
| Heating Method | External heating |
| Operating Ambient Temperature | 5–45 °C |
| Standard Vacuum Pump | Corrosion-resistant diaphragm pump (GC series) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | PTFE-D8 |
| Temperature Range | RT+5°C to 100°C |
| Temperature Control Accuracy | ±0.1°C |
| Bath Capacity | 20 L |
| Heating Power | 2000 W |
| External Dimensions (W×D×H) | 750×330×210 mm |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | QSV-1-14P |
| Instrument Type | Box-Type Muffle Furnace |
| Max Operating Temperature | 1400 °C (Continuous at ≤1300 °C) |
| Temperature Uniformity | ±1 °C |
| Rated Power | 2000 W |
| Heating Rate to Max Temp | 25–35 °C/min (reaches 1400 °C in ~40 min) |
| Heating Element | Silicon Carbide Rods |
| Internal Chamber Dimensions | 100 × 100 × 100 mm |
| Nominal Volume | 1 L |
| Pressure Range | −0.1 MPa to +1 MPa (differential control from 10–1000 mbar) |
| Max Safe Internal Gas Pressure | 0.02 MPa |
| Cooling Options | Natural convection or inert-gas purging |
| Voltage | 220 V AC |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | QVB-5-18P |
| Instrument Type | Box Furnace |
| Maximum Temperature | 1800 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 10000 W |
| Internal Chamber Dimensions | 150 × 300 × 120 mm |
| Nominal Volume | 5 L |
| Heating Element | Silicon Molybdenum Rod (MoSi₂) |
| Control System | Microcomputer-Based Artificial Intelligence Controller with PID and Self-Tuning Algorithms |
| Vacuum Performance | Ultimate Vacuum ≤ −0.1 MPa (1 mbar absolute) |
| Pressure Regulation Range | 10–1000 mbar (gauge), Capable of Maintaining Positive Pressure up to 0.1 MPa (1 bar gauge) |
| Safety Features | Over-Temperature, Over-Pressure, Over-Current, Leakage Protection, Thermocouple Failure Cut-Off, Password-Protected Parameter Access |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | QVB-9-16P |
| Furnace Type | Box-type |
| Max. Operating Temperature | 1600 °C (Continuous Use ≤1500 °C) |
| Temperature Control Accuracy | ±1 °C |
| Max. Input Power | 18000 W |
| Heating Rate to Max. Temp. | ≤30 min |
| Heating Elements | Silicon Molybdenum (MoSi₂) Rods |
| Internal Chamber Dimensions | 200 × 300 × 150 mm |
| Nominal Chamber Volume | 9 L |
| Control System | Programmable PID Controller with Auto-Tuning |
| Vacuum Capability | ≤−0.1 MPa (100 Pa) |
| Pressure Regulation Range | 10–1000 mbar (Gauge) |
| Max. Positive Pressure Rating | 0.02 MPa (200 mbar) |
| Safety Protections | Over-Temperature, Over-Pressure, Over-Current, Ground Fault, Thermocouple Break Detection, Password-Protected Parameter Access |
| Cooling Options | Forced inert gas purge or external ambient air convection |
| Compliance | Designed for GLP/GMP-aligned lab environments |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | QVB-9-16P |
| Instrument Type | Box-Type Furnace |
| Maximum Temperature | 1600 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 9000 W |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Internal Chamber Dimensions | 200 × 300 × 150 mm |
| Nominal Volume | 9 L |
| Control System | Microcomputer-Based AI Controller with PID and Self-Tuning Algorithms |
| Vacuum Performance | Ultimate Vacuum ≤ −0.1 MPa (100 Pa) |
| Pressure Regulation Range | 10–1000 mbar (gauge), capable of maintaining ±0.01 MPa internal overpressure/underpressure |
| Safety Features | Overtemperature, overpressure, overcurrent, leakage protection, thermocouple failure cutoff, parameter password lock |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Box-Type Furnace |
| Maximum Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 9000 W |
| Internal Chamber Dimensions | 400 × 300 × 300 mm |
| Nominal Volume | 36 L |
| Heating Element | Nickel-Chromium Alloy |
| Control System | Microcomputer-Based AI PID Controller with Programmable Ramp/Soak Profiles |
| Vacuum Performance | Ultimate Vacuum ≤ −0.1 MPa (100 Pa) |
| Operating Pressure Range | 10–1000 mbar (gauge), with positive pressure capability up to 0.5 atm (0.05 MPa) |
| Safety Features | Over-Temperature, Over-Pressure, Over-Current, Ground Fault, Thermocouple Failure Detection, Password-Protected Parameter Lock |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | QVS-36-14P |
| Instrument Type | Box-Type Furnace |
| Maximum Temperature | 1400 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 16 kW |
| Internal Dimensions | 400 × 300 × 300 mm |
| Nominal Chamber Volume | 36 L |
| Heating Element | Silicon Carbide Rods |
| Control System | Microcomputer-Based AI Controller |
| Vacuum Performance | ≤ −0.1 MPa (absolute) |
| Operating Pressure Range | 0.01–0.02 MPa (gauge) |
| Safety Features | Over-Temperature, Over-Pressure, Over-Current, Leakage Protection, Thermocouple Failure Cut-off, Password-Protected Parameter Access |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | S13-18PV |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1300 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 8 kW |
| Heating Time to Max Temp | 50 min |
| Heating Element | Silicon Carbide Rods |
| Internal Chamber Dimensions | 200 × 400 × 180 mm |
| Control System | Industrial-Grade Color Touchscreen Controller |
| Nominal Volume | 20 L |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1300 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 12 kW |
| Heating Time to Max Temp | 50 min |
| Heating Element | Silicon Carbide Rods |
| Internal Chamber Dimensions | 300 × 400 × 300 mm (W × D × H) |
| Nominal Volume | 36 L |
| Control System | Industrial-Grade Color Touchscreen Controller |
| Insulation Material | Vacuum-Microporous Ceramic Fiber Board |
| Heating Configuration | Triple-Wall Radiant Heating (Front, Back, Top Walls) |
| Safety Features | Dual-Stage Overtemperature Protection, Door-Interlocked Power Cut-off, Real-Time Voltage/Current Monitoring, Thermocouple Break Detection |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1300 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 15 kW |
| Time to Max Temperature | 50 min |
| Heating Element | Silicon Carbide Rods |
| Internal Chamber Dimensions | 300 × 400 × 300 mm |
| Nominal Volume | 36 L |
| Control System | Expandable Full-Color Touchscreen Controller |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | S13-4P |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1300 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 4 kW |
| Heating Time to Max Temp | 50 min |
| Heating Element | Silicon Carbide Rods |
| Internal Chamber Dimensions | 150 × 250 × 100 mm |
| Control System | AI-Based Fuzzy PID Controller |
| Nominal Volume | 4 L |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | S13-4PV |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1300 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 4 kW |
| Time to Max Temperature | 50 min |
| Heating Method | Silicon Carbide (SiC) Rods |
| Internal Chamber Dimensions | 150 × 250 × 100 mm |
| Control System | Color Touchscreen Controller |
| Nominal Volume | 4 L |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | S13-7P |
| Instrument Type | Box-Type Furnace |
| Maximum Temperature | 1300°C |
| Temperature Control Accuracy | ±1°C |
| Rated Power | 6 kW |
| Heating Time to Max Temperature | 50 min |
| Heating Element | Silicon Carbide Rods |
| Internal Chamber Dimensions (W×D×H) | 150 × 300 × 150 mm |
| Control System | Microcomputer-Based PID Controller |
| Nominal Chamber Volume | 7 L |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | S13-7PV |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1300 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 6 kW |
| Heating Time to Max Temp | 50 min |
| Heating Element | Silicon Carbide Rods |
| Internal Chamber Dimensions | 150 × 300 × 150 mm |
| Nominal Volume | 7 L |
| Control System | Industrial-Grade Color Touchscreen Controller |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | S13-9P |
| Furnace Type | Box-Type Muffle Furnace |
| Max Temperature | 1300 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 12000 W |
| Heating Element | Silicon Carbide Rods |
| Internal Dimensions | 150×200×100 mm to 300×400×300 mm |
| Nominal Chamber Volume | 4 L to 36 L |
| Heating Configuration | Triple-Wall Radiant Heating (Front, Back, Top/Bottom) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | S13/S14 Series |
| Type | Box-Type Muffle Furnace |
| Max Temperature | 1400 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 15000 W |
| Heating Rate to Max Temp | ≤30 min |
| Heating Element | Silicon Carbide (SiC) Rods |
| Internal Chamber Dimensions | 150×250×100 mm to 300×400×300 mm |
| Nominal Volume | 4 L to 36 L |
| Control Mode | Programmable Digital Controller (P Series) / Touchscreen Controller (PV & PV-II Series) |
| Insulation | Vacuum-Microporous Ceramic Fiber Board |
| Chamber Construction | Triple-Wall Radiant Heating |
| Safety Features | Dual-Stage Overtemperature Protection, Door-Interlocked Power Cut-off, Phase Failure & Thermocouple Break Alarms |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | S14-120PY-I |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1400 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 2100 W |
| Internal Dimensions (W×D×H) | 450 × 600 × 450 mm |
| Nominal Volume | 120 L |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1400 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 10 kW |
| Heating Time to Max Temp | ≤60 min |
| Heating Element | Silicon Carbide Rods |
| Internal Chamber Dimensions | 250 × 400 × 180 mm (W × D × H) |
| Nominal Volume | 20 L |
| Control System | Programmable Digital Display Controller with PID Algorithm |
| Safety Features | Door-Interlocked Power Cut-off, Dual-Stage Overtemperature Alarm, Thermocouple Break Detection, Phase Loss Protection |