- All
- Favorite
- Popular
- Most rated
| Brand | Delta Instruments (delta17) |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | DELTA-gs001 |
| Price Range | USD 2,800 – 7,200 |
| Platform Dimensions | 700 mm × 800 mm |
| Max Load Capacity | 100 kg (customizable) |
| Peak Acceleration | Half-Sine: 30–600 g |
| Post-Peak Sawtooth | 30–100 g |
| Square Wave (optional) | 30–120 g |
| Pulse Duration | Half-Sine: 1–30 ms |
| Post-Peak Sawtooth | 6–18 ms |
| Square Wave (optional) | 6–18 ms |
| Acceleration Tolerance | ≤ ±10% |
| Velocity Change Tolerance | ≤ ±10% |
| Lateral Motion Ratio | ≤ 10% |
| Overall Dimensions | 1300 mm × 1200 mm × 2650 mm |
| Mass | 1800 kg |
| Data Acquisition Channels | 2 |
| Sampling Rate | 500 kHz |
| Max Measurable Acceleration | 5000 g |
| Input Voltage Range | ±10 V<sub>PEAK</sub> |
| Sensor Type | Piezoelectric Charge Output |
| Sensor Model | B&W 22100 |
| Sensitivity | 3.93 pC/g |
| Frequency Range | 0.5–12 kHz |
| Acceleration Range | ±2500 g |
| Operating Environment | −40 °C to +160 °C |
| Power Supply | 3-phase AC 380 V ±10%, 5 kVA |
| Compressed Air | 0.5–0.8 MPa |
| Ambient Temp | RT–40 °C |
| Relative Humidity | <85% RH at 25 °C |
| MTBF | ≥5000 h |
| Half-Sine Generator Duty Cycle | ≥8000 consecutive impacts |
| Storage Life (clean, ambient conditions) | ≥5 years |
| Compliance | GB/T 2423.5–1995, GJB 150.18A–2009, GJB 360B–2009, IEC 60068-2-27, MIL-STD-810H, MIL-STD-202G, GB/T 18287, GB 31241, JG 541–2005 |
| Software Functions | Shock Response Spectrum (SRS), Pulse Analysis, Damage Boundary Analysis, Time-Domain Impact Response Calculation, FFT, Force–Deformation Correlation (auxiliary) |
| Brand | DELTA Instruments |
|---|---|
| Model | DELTA-SBT50 |
| Type | Electro-Mechanical Shock Test Table |
| Max Load Capacity | 50–500 kg |
| Standard Waveform | Half-Sine Pulse |
| Compliance | GB/T 2423.5, GB/T 2423.6, IEC 60068-2-29, GB/T 31467.3, JJG 497 |
| Control System | PC-Based Closed-Loop Digital Control with Real-Time Acceleration Feedback |
| Pulse Duration Adjustment | Via Interchangeable Anvil Pads |
| Peak Acceleration Adjustment | Via Adjustable Drop Height |
| Automated Stop | After Predefined Impact Count or Time Duration |
| Data Acquisition | Integrated Accelerometer, Velocity Change (Δv), Pulse Width, and G-Value Normalization |
| Safety | Mechanical Locking Mechanism for Anvil Pad Replacement |
| Dual-Mode Operation | Shock (Single-Impact) and Bump/Collision (Repetitive Impact) Modes |
| Software Features | Real-Time Waveform Display, Tolerance Band Overlay, Exportable CSV/PDF Reports, Audit-Trail-Ready Logging (GLP-Compatible) |
Show next