Electrophoresis/Gel Imaging/UV Detection
Filter
Showing 151–158 of 158 results
| Brand | Tanon |
|---|---|
| Origin | Shanghai, China |
| Model | VE-580 |
| Gel Area (per gel) | 8.6 × 8 cm |
| Max Operating Voltage | 250 V |
| Compatible Gel Formats | 1–4 gels (10 × 10 cm casting frame) |
| Comb Options | 10-, 15-, and 17-well combs |
| Construction | Reinforced borosilicate glass plates with scratch-resistant coating |
| Base Design | Dual-circuit isolated power interface |
| Electrode Configuration | Dual independent electrode arrays |
| Cooling | Passive convection via V-groove side vents |
| Compliance | Designed for ISO/IEC 17025-aligned lab workflows, compatible with GLP documentation requirements |
| Brand | Tanon |
|---|---|
| Model | VE-586 |
| Type | Semi-Dry Transfer Electrophoresis Cell |
| Origin | Shanghai, China |
| Compatible Power Supply | EPS-200 / EPS-300 / EPS-600 |
| Compatible Vertical Electrophoresis Units | VE-680 / VE-180 |
| Max Gel Capacity | 4 × standard mini-gels (e.g., 8.5 × 7.5 cm) |
| Electrode Design | Patented perforated electrode frame |
| Cooling | Passive heat dissipation via optimized electrode geometry and open-frame architecture |
| Accessories Supported | 586-1700 transfer filter paper, VE-10 single-well antibody incubation box, VE-110 multi-well antibody incubation box |
| Compliance | Designed for routine laboratory use in accordance with standard molecular biology workflows per ISO/IEC 17025-aligned practices |
| Brand | Analytik Jena |
|---|---|
| Origin | USA |
| Manufacturer | Analytik Jena |
| Country of Origin | Imported |
| Model | UVP GelSolo |
| Pricing | Available Upon Request |
| Brand | Analytik Jena |
|---|---|
| Origin | USA |
| Manufacturer | UVP (a brand of Analytik Jena) |
| Model | UVP GelStudio PLUS Touch |
| Detection Modes | UV transillumination (302 nm), White light reflection, RGB fluorescence excitation (470/530/630 nm), Optional eLite full-spectrum LED excitation (365–740 nm) |
| Camera | Scientific-grade cooled CCD sensor with 16-bit digitization |
| Lens | Motorized f/1.4 macro lens with auto-focus and zoom |
| Safety | Interlocked UV chamber with automatic lamp shutoff, CE/UL certified |
| Compliance | Meets ISO 9001 manufacturing standards |
| Brand | WIX |
|---|---|
| Origin | Shanghai, China |
| Model | WIX-autoPP Automated Western Blot Processing System |
| Throughput | Up to 24 membranes per run |
| Incubation Modules | 12 independently controlled modules |
| Temperature Control Range | 4–40 °C |
| Antibody Recovery Rate | ≥95% (up to 10 reuses) |
| Module Dimensions (optional) | 3×8 cm, 6×8 cm, or 9×8 cm |
| Membrane Wetting Maintenance | On-board wash buffer retention post-incubation |
| Fluidic Cross-Contamination Prevention | Automated in-line tubing rinse cycles |
| Compatibility | Open-platform design supports third-party primary/secondary antibodies and wash buffers |
| Brand | Yetuo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic (China-manufactured) |
| Model | DYY-6D |
| Input Voltage Range | 110–250 V AC |
| Output Modes | Constant Voltage, Constant Current, Constant Power |
| Voltage Range | 5–600 V |
| Current Range | 1–1200 mA |
| Power Range | 5–500 W |
| Display | 7-inch capacitive touchscreen |
| Voltage Resolution | 1 V |
| Current Resolution | 1 mA |
| Power Resolution | 1 W |
| Timer Range | 1 min – 99 h 59 min |
| Temperature Monitoring Range | −20 °C to +85 °C |
| Program Storage | 10 multi-step protocols (up to 10 steps each) |
| Protection Features | Overcurrent, Overload, Overtemperature, No-load, Short-circuit, and Load Transient Protection |
| Standby Microcurrent Mode | Enabled post-timer completion |
| Auto-Set Mode | Select one parameter (V/I/W) |
| Dimensions | 30 × 30 × 13 cm (W × D × H) |
| Brand | Yetuo |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | YT-mini2 |
| Price | USD 360 (FOB) |
| Gel Dimensions | 83 × 73 mm |
| Gel Thickness Options | 0.75 mm, 1.0 mm, 1.5 mm |
| Comb Options | 10-well and 15-well |
| Electrode Material | 99.99% Pure Platinum |
| Safety Features | Lid-activated power cutoff, polarity-limiting mechanical alignment |
| Construction | High-impact, UV-transparent polycarbonate housing with integrated glass-paddle assembly |
| Sample Capacity | Dual-gel configuration (2 × 83 × 73 mm gels simultaneously) |
| Brand | Youyunpu |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM Manufacturer |
| Instrument Type | Protein Transfer System |
| Automation Level | Fully Automated |
| Transfer Method | Semi-Dry Electrophoretic Transfer |
| Max Output Voltage | 0–25 V (1 V increments) |
| Max Output Current | 0–2.5 A (0.1 A increments) |
| Display | 7-inch capacitive touchscreen with real-time parameter monitoring |
| Programmable Methods | 25 user-defined protocols |
| Transfer Plate Dimensions | 18.0 × 14.5 cm |
| Throughput | 1–4 mini gels or 1–2 midi gels per run |
| Compatible Buffers | Optimized semi-dry transfer buffer concentrate (supplied) |
| Recommended Applications | Proteins ≤180 kDa (transfer time: 7–15 min at 25 V constant voltage) |