Environmental Test Chamber
Filter
Showing 631–660 of 2010 results
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | HAIDA HD-E711 Xenon Arc Weathering Test Chamber |
| Xenon Lamp Power | 5.4 kW (3 lamps, 1200 h service life) |
| Irradiance Control Range | 0.3–1.2 W/m² at 340 nm |
| Temperature Range | 0–80 °C |
| Humidity Range | 20–98 % RH (non-irradiated), 30–98 % RH (light cycle) |
| Black Panel Temperature | 85 ± 3 °C |
| Chamber Dimensions (W×D×H) | ≥600 × 500 × 750 mm |
| Spectral Range | 290–800 nm |
| Water Spray Pressure | 0.12–0.15 kPa |
| Spray Nozzle Diameter | Ø0.8 mm |
| Rainfall Duration | 1–9999 min (continuous or interval mode) |
| Spray Cycle | On/Off time adjustable from 0 to 99 h 59 min each |
| Sample-to-Arc Distance | 350–380 mm |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | HAIDA HD-E711 Xenon Arc Weathering Test Chamber |
| Xenon Lamp Power | 7.5 kW (3 × 2.5 kW air-cooled long-arc lamps) |
| Lamp Lifetime | 1200 hours |
| Irradiance | 550 W/m² ±10 W/m² (290–2450 nm broadband spectrum) |
| Humidity Range | 50–90 %RH ±5 %RH |
| Internal Chamber Dimensions (W×D×H) | 750×600×600 mm |
| Black Panel Temperature Range | 40–90 °C ±3 °C |
| Water Spray Duration | 1–9999 min 59 sec adjustable |
| Spray Interval | 1–240 min adjustable |
| Effective Exposure Area | ≥3000 cm² |
| Sample Rack Size | 750×600 mm (1 pcs) |
| Distance from Arc Center to Specimen | 300 mm |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HD-E714 |
| Temperature Range | −40 °C to +100 °C |
| Refrigeration Method | Compressor-based Cooling |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Uniformity | ≤2 °C |
| Temperature Stability | ±0.5 °C |
| Temperature Deviation | ±2 °C |
| Heating Rate | ≥1 °C/min |
| Cooling Rate | ≥1 °C/min |
| Internal Chamber Dimensions | 1000 mm × 1000 mm × 1000 mm (1 m³) |
| Pressure Range | 101.3 kPa (ambient) to 1 kPa |
| Pressure Control Accuracy | ±5% |
| Depressurization Time (101.3 kPa → 1 kPa) | ≤30 min |
| Power Supply | 380 V AC, 50 Hz, 3-phase 5-wire |
| Control Resolution | Temperature 0.1 °C, Pressure 0.01 Pa |
| Control Accuracy | Temperature ±0.5 °C, Pressure ±1.0 Pa |
| Vacuum System | Oil-free, Clean Scroll Vacuum Pump with Integrated Piezoresistive Pressure Transducer |
| Insulation | Multi-layer Composite Pressure-Rated Polyurethane + Ultra-fine Glass Fiber |
| Inner Chamber Material | SUS304 Stainless Steel |
| Door Seal | Dual-layer High-Temperature Silicone Rubber Gasket |
| Safety Protections | Over-temperature, over-current, compressor high-pressure, motor overheat, leakage, short-circuit, phase-loss, under/over-voltage, oil-level monitoring |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | HD-E801 |
| Ozone Concentration Range | 50–1000 pphm |
| Ozone Control Accuracy | ±10 pphm (50–100 pphm), ±10% (100–1000 pphm) |
| Temperature Range | 20–60 °C |
| Temperature Uniformity | ±2 °C (empty chamber) |
| Temperature Stability | ±0.5 °C |
| Humidity Range | 30–98 %RH |
| Airflow Rate | 100 L/min |
| Internal Dimensions | 400 × 500 × 500 mm (D×W×H) |
| External Dimensions | 950 × 980 × 1650 mm (D×W×H) |
| Net Volume | 800 L |
| Dynamic Sample Rotation Speed | 2–10 rpm (adjustable) |
| Vertical Extension Frequency | 2–15 cycles/min |
| Extension Stroke | 20–100 mm (adjustable) |
| Refrigerant | R404a |
| Compressor | Hermetic French Tecumseh unit |
| Heating System | SUS304 U-shaped finned tubular heater (1500 W) |
| Humidification System | SUS304 U-shaped humidifier |
| Ozone Generator | Silent high-voltage corona discharge type |
| Ozone Sensor | Electrochemical sensor |
| Controller | TEMP880 high-precision color touchscreen PID controller with USB/RS232/RS485 interfaces |
| Compliance Standards | GB/T 7762–2003, GB/T 2951.21–2008, GB/T 2951.5–1997 |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HD-E802-2 |
| Humidity Range | Ambient to 70°C |
| UV Lamp Power | 40 W per lamp |
| Max Data Logging Duration | 60 days (at 1.5-min sampling interval) |
| Irradiation Temperature Range | Ambient to 70°C |
| UV Wavelength Range | 200–480 nm |
| Chamber Internal Dimensions (W×H×D) | 1300 × 1480 × 550 mm |
| Sample Rack Configuration | Tilted tower, 4 racks × 493 × 300 mm each |
| Sample Size per Rack | 75 × 150 mm (2 slots per rack) |
| Lamp Quantity | 8 fluorescent UV lamps (4 front + 4 rear) |
| Lamp Center-to-Center Spacing | 70 mm |
| Sample Surface-to-Lamp Distance | 50 ± 3 mm |
| Spray Nozzles | 8 (4 front + 4 rear), adjustable pressure 70–200 kPa |
| Lamp Length | 1220 mm |
| Lamp Lifetime | ≥1600 h |
| Temperature Resolution | 0.01°C |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±1°C |
| Temperature Deviation | ±1°C |
| Control System | Q-TEST touchscreen PID controller with RS-232 interface |
| Compliance Standards | GB/T 23987–2009, ISO 11507:2007, GB/T 14522–2008, GB/T 16422.3–2014, ISO 4892-3:2006, ASTM G154, ASTM G153, IEC 61215:2005 (Clause 10.10) |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Benchtop Environmental Chamber |
| Cooling Method | Air-Cooled |
| Temperature Range | 5–50 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Humidity Control | Not Specified (Uncontrolled / Optional Humidity Module Not Included) |
| Internal Chamber Dimensions | Customizable |
| Refrigerant | R134a (CFC-Free) |
| Interface | RS485 Port |
| Observation Port | Ø30 mm Access Port |
| Display | LED with Icon-Based UI |
| Safety | Independent Over-Temperature Cut-Off System |
| Control Algorithm | PID Temperature Regulation |
| Timer Function | Built-in Programmable Timer |
| Brand | Haida International |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | HD-E804-41B |
| Quotation | Upon Request |
| Exterior Material | Powder-Coated Cold-Rolled Steel |
| Interior Material | SUS304 Stainless Steel |
| Chamber Dimensions (W×D×H) | 300 × 300 × 276 mm |
| Temperature Range | Ambient +10°C to 250°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ±1°C |
| Vacuum Level | ≤133 Pa (measured via imported mechanical vacuum gauge) |
| Power Supply | AC 220 V, 50 Hz |
| Input Power | 2100 W |
| Operating Environment | 5–40°C |
| Standard Compliance | JB/T 5520–1991, JB/T 9505–1999, JB 20033–2004 |
| Shelf Quantity | 2 pcs |
| Shelf Material | Anodized Aluminum (high-temp oxidation resistant, rapid thermal conduction) |
| Door Seal | Integrated Silicone Gasket with Adjustable Compression Mechanism |
| Control System | Microcomputer-Based PID Controller with LCD Interface, Menu-Driven Operation, Parameter Memory, Auto-Restart After Power Failure, Over-Temperature Alarm, and Calibration Offset Function |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Category | Domestic Laboratory Equipment |
| Model | HAIDA HD-E804-80A Vacuum Drying Oven |
| Quotation | Available Upon Request |
| Exterior Material | Powder-Coated Cold-Rolled Steel |
| Interior Material | SUS304 Stainless Steel |
| Temperature Range | Ambient (RT) to 250 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ±1 °C |
| Vacuum Level | ≤133 Pa |
| Power Supply | AC 220 V, 50 Hz |
| Input Power | 2100 W |
| Chamber Dimensions (W×D×H) | 300 × 300 × 276 mm |
| Shelf Capacity | 2 Adjustable Aluminum Shelves |
| Control System | LCD Microcomputer PID Controller with Menu-Driven Interface |
| Compliance Standards | JB/T 5520–1991, JB/T 9505–1999, JB 20033–2004 |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HD-E808-120 |
| Spray Method | Adjustable |
| Fog Collection Rate | 1.0–2.0 mL/80 cm²/h (averaged over ≥16 h) |
| Nozzle Pressure | 1.00 ± 0.01 kgf/cm² |
| Test Chamber Temperature Range | RT to 50 °C |
| Internal Dimensions (L×W×H) | 1200 × 500 × 1000 mm |
| Nominal Volume | 600 L |
| Salt Solution Tank Capacity | 40 L |
| Power Supply | AC 220 V, Single-phase + PE, ±10% voltage tolerance, 50 ± 0.5 Hz |
| Max Current | 10 A |
| Temp. Control Accuracy | ±0.1 °C (PID digital controller) |
| Temp. Uniformity | ±1 °C |
| Temp. Fluctuation | ±0.5 °C |
| pH Range (Neutral) | 6.5–7.2 |
| pH Range (Acidic/CASS) | 3.1–3.3 |
| Compliance | GB/T 2423.17–2008, ISO 9227:2006, ASTM B117–2009, JIS H 8502, GB/T 10125–2012, GJB 150.11A–2009 |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Model | HD-E808-60A |
| Spray Method | Adjustable Continuous/Intermittent |
| Spray Rate | 1.0–2.0 mL/80 cm²/h (averaged over ≥16 h) |
| Nozzle Pressure | 1.00 ± 0.01 kgf/cm² |
| Test Chamber Temperature Range | RT to 50 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Stability | ±1 °C |
| Temperature Resolution | 0.1 °C |
| Chamber Volume | 108 L |
| Internal Dimensions (L×W×H) | 60 × 45 × 40 cm |
| External Dimensions (L×W×H) | ~110 × 65 × 110 cm |
| Weight | ~60 kg |
| Max Power | 2.2 kW |
| Supply | 1Ø AC 220 V, 10 A |
| Compliance | ASTM B117, ISO 9227, GB/T 10125, JIS H8502, IEC 60068-2-11, GJB 150.11A |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | HAIDA HD-E809 Combined Temperature-Humidity-Vibration Test System |
| Temperature Range | −40 °C to +150 °C |
| Humidity Range | 30–95 %RH |
| Temperature Ramp Rate | ≥3 °C/min (heating, no-load, average) / 0.7–1 °C/min (cooling, no-load, average) |
| Temperature Uniformity | ≤2.0 °C |
| Temperature Fluctuation | ≤±0.5 °C |
| Humidity Fluctuation | ≤±2 %RH |
| Humidity Accuracy | ±5 %RH (≤75 %RH), ±3 %RH (>75 %RH) |
| Vibration Force | 1000 kgf peak (sine), 1000 kgf rms (random), 2000 kgf peak (shock) |
| Frequency Range | 2–3000 Hz |
| Max Displacement | 51 mm p-p |
| Max Velocity | 2 m/s |
| Max Acceleration | 100 g (980 m/s², unloaded) |
| Payload Capacity | 200 kg |
| Shaker Coil Diameter | Ø200 mm |
| Coil Mass | 12 kg |
| Table Fixtures | 17 × M10 stainless steel threaded inserts |
| Magnetic Leakage | <10 Gauss |
| Eccentric Moment Tolerance | 100 N·m |
| Vertical Extension Table | 300 × 300 mm aluminum alloy, hard-anodized surface |
| Horizontal Oil-Film Slip Table | 300 × 300 mm aluminum alloy, hard-anodized, 100 × 100 mm grid M10 inserts |
| Internal Chamber Dimensions | 1200 × 1200 × 800 mm (W × D × H) |
| Test Port | One Ø100 mm port on left side |
| Refrigeration | Cascade dual-stage compression |
| Temperature Control Algorithm | PID + BTC (Balance Temperature Control) + DCC (Dynamic Cooling Capacity Control) + DEC (Dynamic Electrical Control) |
| Temperature Resolution | 0.01 °C |
| Humidity Resolution | 0.1 %RH |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | HD-F801-3 Formaldehyde & VOC Emission Climate Chamber |
| Pricing | Upon Request |
| Temperature Range | 15–40°C |
| Temperature Resolution | 0.1°C |
| Humidity Range | 30–80% RH |
| Humidity Resolution | 0.1% RH |
| Temperature Fluctuation | ≤±0.3°C |
| Temperature Uniformity | ≤±1.0°C |
| Temperature Deviation | ≤±0.5°C |
| Humidity Deviation | ≤±3% RH |
| Airflow Velocity | 0.1–0.3 m/s (adjustable) |
| Internal Chamber Dimensions | 1000 × 950 × 1072 mm (D × W × H) |
| Power Supply | 220 V, 50 Hz, 8 kW |
| Brand | HAIDA INTERNATIONAL |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HD-E708 Rapid Temperature Change Chamber |
| Temperature Range | −70 °C to +150 °C |
| Refrigeration Method | Compressor-based |
| Explosion-Proof | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ≤ ±0.5 °C (unloaded) |
| Temperature Deviation | ≤ 2 °C (unloaded) |
| Temperature Uniformity | ≤ 2 °C (unloaded, 15-point measurement) |
| Heating Rate | ≥ 3 °C/min (average, unloaded) |
| Cooling Rate | ≥ 10 °C/min (70 °C → −10 °C, average, unloaded, at outlet) |
| Internal Chamber Dimensions | 1700 × 1700 × 2500 mm (W × D × H) |
| Chamber Volume | 7 m³ |
| Airflow Capacity | ≥ 17,500 CFM |
| Maximum Thermal Load | 500 kg aluminum mass (13 kW heat dissipation) |
| Floor Load Capacity | ≥ 1000 kg/m² (uniformly distributed) |
| Insulation | ≥ 100 mm rigid polyurethane foam |
| Interior Material | SUS#304 stainless steel (≥1.0 mm thickness) |
| Exterior Material | SUS#304 stainless steel or galvanized steel with dual-side paint (≥1.0 mm thickness) |
| Temperature Overshoot | ≤ 5 °C (15-point measurement) |
| Brand | Haida International |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Model | HD-E804-45 |
| Heating Method | Electric Forced-Air with Vacuum Capability |
| Chamber Dimensions (W×D×H) | 300 × 300 × 276 mm |
| Interior Material | SUS304 Stainless Steel |
| Exterior Material | Cold-Rolled Steel with Powder-Coated Finish |
| Temperature Range | Ambient +10°C to 250°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ±1°C |
| Vacuum Level | ≤133 Pa (mechanical vacuum gauge) |
| Power Supply | AC 220 V, 50 Hz |
| Input Power | 2100 W |
| Working Environment | 5–40°C |
| Standard Compliance | JB/T 5520–1991, JB/T 20033–2004, JB/T 9505–1999 |
| Accessories | 2 adjustable stainless steel shelves, silicone door gasket, PID digital temperature controller with data logging interface |
| Brand | Haida International |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HD-E805 Muffle Furnace / Ashing Furnace |
| Power | 2.5 kW (HD-E805), up to 12 kW (HD-E805-5) |
| Max Temperature | 1000 °C (standard), 1200 °C (high-temp variants) |
| Internal Chamber Dimensions (H×W×D) | 80×120×200 mm (HD-E805), up to 200×300×500 mm (HD-E805-5) |
| Voltage | 220 V or 380 V AC, 50/60 Hz |
| Controller Options | C6, C6D, or S27 programmable process controllers |
| Construction | Stainless steel outer casing with ceramic fiber insulation (vacuum-formed modules), refractory lining, rear ventilation ports for optional catalytic exhaust or forced-air cooling |
| Safety | Ground-fault circuit interrupter (GFCI) integrated, viewing window in door |
| Brand | HAIDA International |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Model | HD-E808-90AT |
| Spray Mode | Adjustable Continuous/Cyclic/Programmable |
| Salt Spray Deposition Rate | 1.0–2.0 mL/h/80 cm² (averaged over ≥16 h) |
| Nozzle Pressure | 1.00 ± 0.01 kgf/cm² |
| Test Chamber Temperature Range | RT to 70 °C |
| Saturated Air Tank Temperature Range | RT+5 °C to 70 °C |
| Humidity Range | 30–98 %RH |
| Internal Dimensions (W×D×H) | 900 × 600 × 600 mm |
| Nominal Volume | 324 L |
| Power Supply | 3-phase AC 380 V, 10 kW |
| Safety Protections | Overtemperature, Low-Water, Phase-Loss, Ground-Fault |
| Brand | Haiyin Equipment |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | COK7193 |
| Price Range | USD 12,000 – 39,500 (FOB) |
| High-Temperature Range | +180 °C |
| Low-Temperature Range | −70 °C |
| Thermal Shock Range | −55 °C to +150 °C |
| Temperature Stability | ±2 °C |
| Temperature Transition Time | ≤5–15 s (−55 °C ↔ +150 °C) |
| Brand | Haiyin Equipment |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HW-100L |
| Temperature Range | −70 °C to +150 °C |
| Cooling Method | Compressor-Based Refrigeration |
| Explosion-Proof Design | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±2.0 °C |
| Temperature Deviation | ±1.5 °C |
| Temperature Uniformity | 2.0 °C |
| Heating Rate | 3–5 °C/min |
| Cooling Rate | 1.0–1.2 °C/min |
| Internal Chamber Dimensions | 30 × 25 × 30 cm (L × W × H) |
| Brand | Hao Tianxin |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Model | PP-SH-90 |
| Spraying Mode | Continuous |
| Spray Volume | 1–2 mL/h |
| Nozzle Pressure | 0.7 bar |
| Fog Removal Mode | Continuous |
| Salt Spray Deposition Rate | 1–2 mL / 2000 cm²·h |
| Temperature Range | Ambient to 55°C |
| Brand | Hao Tianxin |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SMC-80L |
| Instrument Type | Vertical |
| Condensation Method | Air-Cooled |
| Temperature Range | -40 °C to 150 °C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation (Empty Load) | ≤±0.5 °C |
| Humidity Uniformity | ±2% RH |
| Humidity Fluctuation | ±2.5% RH |
| Heating Rate | ~30 min (from +20 °C to 150 °C) |
| Internal Chamber Dimensions | 400 mm × 400 mm × 500 mm (W×D×H) |
| Brand | Hao Tianxin |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Type | Forced-Air Thermal Aging Chamber |
| Chamber Classification | Aging Room/Chamber |
| Model | ST-015A |
| Max Operating Temperature | 200–300 °C |
| Temperature Range | RT+10 °C to 300 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation (Empty Load) | ≤±1.5 °C from RT+10 °C to 280 °C |
| Heating Rate | ≤42 min from RT+10 °C to 170 °C |
| Temperature Sensor | Pt100 Platinum Resistance Thermometer |
| Control System | Digital PID Controller with Auto-Tuning & Linear Compensation |
| Air Circulation | Forced Internal Recirculation (BTC) via Axial Flow Fan |
| Insulation Material | Ultra-Fine Glass Fiber |
| Interior Material | SUS304 Stainless Steel |
| Shelf Configuration | 2 Stainless Steel Wire Mesh Shelves |
| Sealing | High-Temperature Silicone Rubber Gasket |
| Compliance | JB/T 5520–1991, GB/T 2423.2–2008, GJB 150.3A–2009 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,500 (FOB) |
| Internal Chamber Dimensions | Φ25×40 cm / Φ30×50 cm / Φ40×60 cm / Φ50×70 cm |
| Temperature Range | 100–132 °C |
| Humidity Condition | 100 % RH saturated steam |
| Pressure Range | 0–4 kgf/cm² above atmospheric pressure |
| Temperature Control Accuracy | ±0.1 °C (PID-controlled digital LED controller) |
| Safety Features | Dual overheat protection, interlocked door switch, automatic pressure relief valve, ABS thermal-insulated door, integrated silicone gasket, auto-water replenishment, unsaturated steam purge system |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Internal Chamber Dimensions | Ø350 × 500 mm (cylindrical) |
| Internal Material | SUS304 stainless steel |
| External Material | Powder-coated steel |
| Temperature Range | RT+10°C to 132°C (saturated steam) |
| Humidity Range | 75–100% RH (saturation-controlled) |
| Pressure Range | 0.00–2.90 kg/cm² gauge (max vessel rating: 3.5 kg/cm²) |
| Test Duration | 0–999 hours (programmable) |
| Temperature Uniformity | ±1.0°C |
| Ramp-up Time (RT→132°C) | ≤60 min |
| Pressurization Time (0→2.0 kg/cm²) | ≤50 min |
| Vacuum Preconditioning | Integrated particulate-filtered air purge (<1 µm filtration) |
| Water Autonomy | Up to 200 h per fill (optional fully automated补水 system available) |
| [Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,500 (approx.) |
| Internal Chamber | Ø300 × 450 mm (cylindrical) |
| External Dimensions | 660 × 950 × 600 mm (W×H×D) |
| Interior Material | SUS304 Stainless Steel |
| Exterior Finish | Powder-Coated Steel |
| Temperature Range | 100–132°C |
| Humidity | 100% RH (saturated steam) |
| Pressure Range | 0.0–3.0 kg/cm² absolute (max. safety rating: 3.0 kg/cm² gauge = 1 atm + 2.0 kg/cm²) |
| Time Range | 0–1000 h |
| Temp. Uniformity | ±2.0°C at 100°C |
| Temp. Accuracy | ±0.5°C |
| Temp. Resolution | 0.1°C |
| Pressure Accuracy | ±0.15 kg/cm² |
| Heating Rate | RT to 121°C in ≤35 min |
| Pressurization Rate | 0.0 to 1.0 kg/cm² in ≤35 min |
| Control System | Microprocessor-based PID + SSR with LED display for temperature/time |
| Sensor | PT-100 RTD (Class A) |
| Heating Element | Insulated high-voltage resistant sheathed heater |
| Air Circulation | Natural convection of saturated steam] |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Internal Dimensions | Ø250 × 400 mm |
| External Dimensions | W560 × H1000 × D650 mm |
| Temperature Range | +100°C to +132°C |
| Relative Humidity | 100% RH (saturated steam) |
| Control System | Microprocessor-based PID controller with LED display, SSR output |
| Temperature Sensor | Pt100 platinum resistance thermometer |
| Heating | Stainless steel finned heater |
| Humidification | Electric surface-evaporation type with drain port |
| Inner Chamber Material | SUS#304 mirror-finish stainless steel |
| Outer Cabinet | SUS#304 stainless steel with electrostatic powder coating |
| Safety Protections | Fuseless overcurrent protection, compressor overload protection, overtemperature cut-off, low-water level alarm, dry-heater burnout prevention, fast-acting thermal fuse |
| Power Supply | 1Φ 220 V, 8 A, 50 Hz ±10% |
| Water Requirement | RO-purified or distilled water |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Internal Dimensions | Ø250 × 400 mm |
| External Dimensions | W560 × H1000 × D650 mm |
| Temperature Range | +100°C to +132°C |
| Humidity Range | 75–100% RH |
| Control System | Microprocessor-based PID controller with LED display |
| Temperature Sensor | Pt100 Platinum Resistance Thermometer |
| Heating | Stainless Steel Finned Heater |
| Humidification | Electric Surface Evaporation System |
| Chamber Material | Interior – Mirror-Finish SUS#304 Stainless Steel |
| Safety Protections | Fuseless Overload Protector, Compressor Overcurrent Protector, Overtemperature Cut-off, Low-Water Level Detection, Dry-Run Protection for Heater/Humidifier, Fast-Acting Thermal Fuse |
| Power Supply | 1φ 220 V, 8 A, 50 Hz ±10% |
| Water Requirement | RO Purified or Distilled Water |
| Brand | Generic |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Internal Dimensions (HAST-25) | Ø250 × 450 mm |
| Internal Dimensions (HAST-35) | Ø350 × 500 mm |
| Temperature Range | RT to 132°C |
| Humidity Range | 75–100% RH |
| Pressure Range | 0.0–2.8 kg/cm² (gauge), max safe capacity 4.0 kg/cm² |
| Temperature Uniformity | ±1.5°C |
| Temperature Control Accuracy | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Pressurization Time (0 → 2.0 kg/cm²) | ~30 min |
| Inner Chamber Material | SUS304 stainless steel |
| Outer Casing | SECC steel with electrostatic powder coating |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pressure Range | 0–6 kg/cm² (0–0.6 MPa) |
| Operating Pressure | 2.0 kg/cm² (≈200 kPa gauge) |
| Temperature Range | +100°C to +132°C (saturated steam) |
| Humidity Range | 75–100% RH (saturated vapor) |
| Temperature Control Accuracy | ±0.5°C |
| Time Setting Range | 0.00–999.99 hours |
| Chamber Structure | Horizontal cylindrical test chamber with vacuum-assisted air purge |
| Compliance | ASTM D2244, IEC 60068-2-66, JIS C 60068-2-66, MIL-STD-202, ISO 16750-4, UL 746, NACE TM0177, CNS 12527, BS EN 60068-2-66 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Internal Dimensions (Ø × H) | Φ250×300 mm to Φ650×600 mm |
| External Dimensions (W×H×D) | 500×500×700 mm to 950×900×1100 mm |
| Operating Temperature Range | 105–135 °C (143 °C optional) |
| Relative Humidity Range | 70–100 % RH |
| Saturation Pressure Range | 0.0–2.0 kg/cm² (gauge) — up to 3.0 kg/cm² on request |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Safety Systems | Low-water cutoff, overpressure relief, auto/manual water replenishment, automatic steam venting |
| Standard Accessories | Two stainless-steel shelves |
