Environmental Test Chamber
Filter
Showing 751–780 of 3662 results
| Brand | Haiyin Equipment |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HW-100L |
| Temperature Range | −70 °C to +150 °C |
| Cooling Method | Compressor-Based Refrigeration |
| Explosion-Proof Design | Standard (Non-Explosion-Proof) |
| Temperature Fluctuation | ±2.0 °C |
| Temperature Deviation | ±1.5 °C |
| Temperature Uniformity | 2.0 °C |
| Heating Rate | 3–5 °C/min |
| Cooling Rate | 1.0–1.2 °C/min |
| Internal Chamber Dimensions | 30 × 25 × 30 cm (L × W × H) |
| Brand | Hao Tianxin |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Model | PP-SH-90 |
| Spraying Mode | Continuous |
| Spray Volume | 1–2 mL/h |
| Nozzle Pressure | 0.7 bar |
| Fog Removal Mode | Continuous |
| Salt Spray Deposition Rate | 1–2 mL / 2000 cm²·h |
| Temperature Range | Ambient to 55°C |
| Brand | Hao Tianxin |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SMC-80L |
| Instrument Type | Vertical |
| Condensation Method | Air-Cooled |
| Temperature Range | -40 °C to 150 °C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation (Empty Load) | ≤±0.5 °C |
| Humidity Uniformity | ±2% RH |
| Humidity Fluctuation | ±2.5% RH |
| Heating Rate | ~30 min (from +20 °C to 150 °C) |
| Internal Chamber Dimensions | 400 mm × 400 mm × 500 mm (W×D×H) |
| Brand | Hao Tianxin |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Type | Forced-Air Thermal Aging Chamber |
| Chamber Classification | Aging Room/Chamber |
| Model | ST-015A |
| Max Operating Temperature | 200–300 °C |
| Temperature Range | RT+10 °C to 300 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation (Empty Load) | ≤±1.5 °C from RT+10 °C to 280 °C |
| Heating Rate | ≤42 min from RT+10 °C to 170 °C |
| Temperature Sensor | Pt100 Platinum Resistance Thermometer |
| Control System | Digital PID Controller with Auto-Tuning & Linear Compensation |
| Air Circulation | Forced Internal Recirculation (BTC) via Axial Flow Fan |
| Insulation Material | Ultra-Fine Glass Fiber |
| Interior Material | SUS304 Stainless Steel |
| Shelf Configuration | 2 Stainless Steel Wire Mesh Shelves |
| Sealing | High-Temperature Silicone Rubber Gasket |
| Compliance | JB/T 5520–1991, GB/T 2423.2–2008, GJB 150.3A–2009 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,500 (FOB) |
| Internal Chamber Dimensions | Φ25×40 cm / Φ30×50 cm / Φ40×60 cm / Φ50×70 cm |
| Temperature Range | 100–132 °C |
| Humidity Condition | 100 % RH saturated steam |
| Pressure Range | 0–4 kgf/cm² above atmospheric pressure |
| Temperature Control Accuracy | ±0.1 °C (PID-controlled digital LED controller) |
| Safety Features | Dual overheat protection, interlocked door switch, automatic pressure relief valve, ABS thermal-insulated door, integrated silicone gasket, auto-water replenishment, unsaturated steam purge system |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Internal Chamber Dimensions | Ø350 × 500 mm (cylindrical) |
| Internal Material | SUS304 stainless steel |
| External Material | Powder-coated steel |
| Temperature Range | RT+10°C to 132°C (saturated steam) |
| Humidity Range | 75–100% RH (saturation-controlled) |
| Pressure Range | 0.00–2.90 kg/cm² gauge (max vessel rating: 3.5 kg/cm²) |
| Test Duration | 0–999 hours (programmable) |
| Temperature Uniformity | ±1.0°C |
| Ramp-up Time (RT→132°C) | ≤60 min |
| Pressurization Time (0→2.0 kg/cm²) | ≤50 min |
| Vacuum Preconditioning | Integrated particulate-filtered air purge (<1 µm filtration) |
| Water Autonomy | Up to 200 h per fill (optional fully automated补水 system available) |
| [Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,500 (approx.) |
| Internal Chamber | Ø300 × 450 mm (cylindrical) |
| External Dimensions | 660 × 950 × 600 mm (W×H×D) |
| Interior Material | SUS304 Stainless Steel |
| Exterior Finish | Powder-Coated Steel |
| Temperature Range | 100–132°C |
| Humidity | 100% RH (saturated steam) |
| Pressure Range | 0.0–3.0 kg/cm² absolute (max. safety rating: 3.0 kg/cm² gauge = 1 atm + 2.0 kg/cm²) |
| Time Range | 0–1000 h |
| Temp. Uniformity | ±2.0°C at 100°C |
| Temp. Accuracy | ±0.5°C |
| Temp. Resolution | 0.1°C |
| Pressure Accuracy | ±0.15 kg/cm² |
| Heating Rate | RT to 121°C in ≤35 min |
| Pressurization Rate | 0.0 to 1.0 kg/cm² in ≤35 min |
| Control System | Microprocessor-based PID + SSR with LED display for temperature/time |
| Sensor | PT-100 RTD (Class A) |
| Heating Element | Insulated high-voltage resistant sheathed heater |
| Air Circulation | Natural convection of saturated steam] |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Internal Dimensions | Ø250 × 400 mm |
| External Dimensions | W560 × H1000 × D650 mm |
| Temperature Range | +100°C to +132°C |
| Relative Humidity | 100% RH (saturated steam) |
| Control System | Microprocessor-based PID controller with LED display, SSR output |
| Temperature Sensor | Pt100 platinum resistance thermometer |
| Heating | Stainless steel finned heater |
| Humidification | Electric surface-evaporation type with drain port |
| Inner Chamber Material | SUS#304 mirror-finish stainless steel |
| Outer Cabinet | SUS#304 stainless steel with electrostatic powder coating |
| Safety Protections | Fuseless overcurrent protection, compressor overload protection, overtemperature cut-off, low-water level alarm, dry-heater burnout prevention, fast-acting thermal fuse |
| Power Supply | 1Φ 220 V, 8 A, 50 Hz ±10% |
| Water Requirement | RO-purified or distilled water |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Internal Dimensions | Ø250 × 400 mm |
| External Dimensions | W560 × H1000 × D650 mm |
| Temperature Range | +100°C to +132°C |
| Humidity Range | 75–100% RH |
| Control System | Microprocessor-based PID controller with LED display |
| Temperature Sensor | Pt100 Platinum Resistance Thermometer |
| Heating | Stainless Steel Finned Heater |
| Humidification | Electric Surface Evaporation System |
| Chamber Material | Interior – Mirror-Finish SUS#304 Stainless Steel |
| Safety Protections | Fuseless Overload Protector, Compressor Overcurrent Protector, Overtemperature Cut-off, Low-Water Level Detection, Dry-Run Protection for Heater/Humidifier, Fast-Acting Thermal Fuse |
| Power Supply | 1φ 220 V, 8 A, 50 Hz ±10% |
| Water Requirement | RO Purified or Distilled Water |
| Brand | Generic |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Internal Dimensions (HAST-25) | Ø250 × 450 mm |
| Internal Dimensions (HAST-35) | Ø350 × 500 mm |
| Temperature Range | RT to 132°C |
| Humidity Range | 75–100% RH |
| Pressure Range | 0.0–2.8 kg/cm² (gauge), max safe capacity 4.0 kg/cm² |
| Temperature Uniformity | ±1.5°C |
| Temperature Control Accuracy | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Pressurization Time (0 → 2.0 kg/cm²) | ~30 min |
| Inner Chamber Material | SUS304 stainless steel |
| Outer Casing | SECC steel with electrostatic powder coating |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pressure Range | 0–6 kg/cm² (0–0.6 MPa) |
| Operating Pressure | 2.0 kg/cm² (≈200 kPa gauge) |
| Temperature Range | +100°C to +132°C (saturated steam) |
| Humidity Range | 75–100% RH (saturated vapor) |
| Temperature Control Accuracy | ±0.5°C |
| Time Setting Range | 0.00–999.99 hours |
| Chamber Structure | Horizontal cylindrical test chamber with vacuum-assisted air purge |
| Compliance | ASTM D2244, IEC 60068-2-66, JIS C 60068-2-66, MIL-STD-202, ISO 16750-4, UL 746, NACE TM0177, CNS 12527, BS EN 60068-2-66 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Internal Dimensions (Ø × H) | Φ250×300 mm to Φ650×600 mm |
| External Dimensions (W×H×D) | 500×500×700 mm to 950×900×1100 mm |
| Operating Temperature Range | 105–135 °C (143 °C optional) |
| Relative Humidity Range | 70–100 % RH |
| Saturation Pressure Range | 0.0–2.0 kg/cm² (gauge) — up to 3.0 kg/cm² on request |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Safety Systems | Low-water cutoff, overpressure relief, auto/manual water replenishment, automatic steam venting |
| Standard Accessories | Two stainless-steel shelves |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | China (Manufactured in Wuhan) |
| Supplier Type | Authorized Distributor |
| Import Status | Imported Components |
| Price | USD 4,050 (FOB Wuhan) |
| Temperature Range | 110°C / 132°C (saturated steam) |
| Humidity Range | 100% RH (saturation) |
| Pressure Range | 0.5–2.0 kg/cm² (max safety capacity: 3.5 kg/cm²) |
| Test Duration | 0–999 h (adjustable) |
| Temperature Uniformity | ±2.0°C |
| Heating Rate | RT to 132°C in ≤35 min (at control point) |
| Pressurization Rate | 0.0 to 2.0 kg/cm² in ≤40 min (at control point) |
| Temperature Control Accuracy | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Controller | Microprocessor-based PID with SSR output |
| Compliance | ASTM F1876, IEC 60068-2-66, JIS C 60068-2-66, ISO 16750-4, MIL-STD-883 Method 1008.8, UL 1577, NACE TM0177, CNS 12403 |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 14,200 (FOB) |
| Internal Chamber Dimensions | Ø300 × 450 mm (D × H) |
| External Dimensions | 660 × 950 × 600 mm (W × H × D) |
| Internal Material | SUS316 Stainless Steel or Epoxy-Coated Steel |
| Temperature Resolution | 0.1 °C |
| Pressure Control Range | 0–4 kg/cm² (0–392 kPa) |
| Operating Pressure Range | 1.0–2.5 kg/cm² (98–245 kPa) |
| Saturation Steam Temperature Range | Up to 143 °C at 2.5 kg/cm² |
| Pressure Accuracy | ±0.2–1.5 kg/cm² |
| Heating Method | Insulated High-Voltage Nichrome Heater with PID + SSR Control |
| Air Circulation | Natural Convection of Saturated Steam |
| Compliance | ASTM B117, IEC 60068-2-66, JIS C 60068-2-66, MIL-STD-202G, ISO 9001, UL 61010-1, NACE TM0177 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | +105.0°C to +142.9°C |
| Humidity Range | 75–100% RH |
| Temperature Stability | ±0.5°C |
| Humidity Stability | ±3% RH |
| Temperature Uniformity | ±1.0°C |
| Pressure Range | 0.2–2.0 kg/cm²G (Optional: 0.2–4.0 kg/cm²G) |
| Ramp Time | ~120 min (from ambient to 140°C) |
| Internal Chamber Dimensions | Ø45×45 cm or Ø65×60 cm |
| Construction Material | Inner & Outer Chamber – SUS316 Stainless Steel (Body), SUS304 Stainless Steel (Exterior Casing) |
| Power Supply | 1φ 220V 60Hz / 3φ 380V 50Hz, 20A |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Internal Dimensions (Ø × H) | Φ250×300 mm to Φ650×600 mm |
| External Dimensions (W×H×D) | 500×500×700 mm to 950×900×1100 mm |
| Operating Temperature Range | 105–135 °C (143 °C optional) |
| Relative Humidity Range | 70–100 % RH |
| Steam Pressure Range | 0–2.0 kg/cm² (gauge), up to 3.0 kg/cm² on special order |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Safety Features | Dual overheat protection, door interlock, pressure relief valve, low-water cutoff, automatic steam purge, auto-fill and manual drain functions |
| Compliance | Designed per JESD22-A110, JEDEC Standard for HAST |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | +100°C to +132°C |
| Temp. Uniformity | ±1.5°C |
| Temp. Stability | ±0.5°C |
| Humidity Range | 75–100% RH (Saturated Steam) |
| Humidity Uniformity | ±3.0% RH |
| Humidity Stability | ±1.5% RH |
| Pressure Range | 0–4 kg/cm² (gauge), with operating range 1.0–3.0 kg/cm² |
| Max. Safety Pressure Capacity | 4 kg/cm² (≈490 kPa gauge, equivalent to ~5 atm absolute) |
| Test Duration | 0–999 hours |
| Pressurization Time | ~45 min (0 → 2.00 kg/cm²) |
| Heating Time | ~10 min (+100°C → +132°C, no-load, air temperature average) |
| Circulation Method | Natural convection of saturated steam |
| Control System | Microprocessor-based PID controller with PT-100 RTD sensing, LED time display, analog pressure gauge, and manual water inlet valve with auto-refill capability |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Internal Chamber Dimensions | Φ25×35 cm, Φ30×45 cm, Φ40×55 cm, Φ50×60 cm |
| Temperature Range | 105–132°C, 105–142.9°C, 105–155°C |
| Pressure Range | 0.2–2.0 kg/cm² (gauge), 0.2–3.0 kg/cm² (gauge), 0.2–3.5 kg/cm² (gauge) |
| Humidity Range | 65–100% RH (adjustable) |
| Controller | Dual-language (English/Chinese), USB & RS-232C interfaces, real-time data logging and curve export |
| Resolution | Temperature: 0.1°C, Humidity: 0.1% RH, Pressure: 0.1 kg/cm² |
| Temperature/Humidity Stability (Unsaturated Mode) | ±0.5°C / ±2.5% RH |
| Temperature/Humidity Stability (Saturated Mode) | ±0.5°C / 100% RH |
| Uniformity | ±0.5°C / ±5% RH |
| Bias Terminals | Standard: 8 channels (optional: 8–55 channels), AC/DC 125 V / 1 A |
| Pressurization Time | ~45–55 min depending on configuration |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Internal Dimensions (Ø × L) | 30 cm × 50 cm |
| External Dimensions (W × H × D) | 56 cm × 45 cm × 82 cm |
| Operating Pressure Range | Up to 3 atm (gauge) |
| Temperature Range | 100 °C to 130 °C |
| Humidity Range | 85–100% RH (saturated steam environment) |
| Water Supply | Automatic float-controlled stainless steel reservoir |
| Safety Compliance | Meets IEC 60068-2-66, JESD22-A102D, MIL-STD-202 Method 108, and JEDEC JESD22-A110 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Internal Chamber Dimensions | Φ250×450 mm / Φ300×450 mm / Φ400×450 mm |
| Temperature Range | 100–132 °C |
| Humidity Range | 75–100 % RH (saturated steam) |
| Pressure Range | 0–2.5 kg/cm² above ambient atmospheric pressure |
| Circulation Method | Natural convection of saturated steam |
| Temperature Sensor | PT-100 Ω RTD (platinum resistance thermometer) |
| Heating Element | Insulated, high-voltage-rated resistive heater |
| Chamber Material | Stainless steel cylindrical inner chamber with arc-shaped interior walls |
| Sealing Mechanism | Self-tightening elastomeric packing under internal pressure |
| Pre-test Vacuum Function | Integrated vacuum pump with ≤1 µm particulate filtration |
| Safety Protection | Critical-point limit monitoring with fault indication and automatic shutdown |
| Auxiliary Functions | Timed post-test drying cycle |
| Water Management | Automatic water replenishment and controlled pressure release at test completion |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Temperature Range | 105–132 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Range | 75–100 % RH |
| Humidity Stability | ±2.5 % RH |
| Humidity Uniformity | ±5.0 % RH |
| Pressure Range | 0.05–0.196 MPa (0.5–2.0 kgf/cm²) |
| Ramp Time (Temp) | ≤35 min (25→132 °C) |
| Ramp Time (Pressure) | ≤40 min (0→0.196 MPa) |
| Safety | Overpressure, overtemperature, and vacuum-failure interlocks |
| Compliance | Designed per JESD22-A110, JEDEC Standard, MIL-STD-883 Method 1030, and IEC 60068-2-66 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Temperature Range | 105–132 °C (control point) |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Range | 75–100 % RH (control point) |
| Humidity Fluctuation | ±2.5 % RH |
| Humidity Uniformity | ±5.0 % RH |
| Pressure Range | 0.05–0.196 MPa (0.5–2 kgf/cm²) |
| Ramp Time (Ambient to 132 °C) | ≤35 min |
| Pressure Ramp Time (Ambient to 2 kgf/cm²) | ≤40 min |
| Water Level Auto-Replenishment | Yes |
| Post-Test Drying Function | Electric Heating Dry Mode |
| Compliance | ASTM B809, JESD22-A102, JEDEC JESD22-A110, IEC 60068-2-66 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Industrial Distributor |
| Price | USD 14,200 (FOB) |
| Chamber Volume | 75.4 L (Ø400 mm × L600 mm) |
| External Dimensions | 900 × 700 × 1600 mm (W×D×H) |
| Inner Tank Material | SUS316 Stainless Steel (3 mm thick) |
| Outer Casing | Optional SUS304 or Powder-Coated Steel |
| Insulation | Rock Wool + Rigid Polyurethane Foam (≥80 mm) |
| Steam Generator | Titanium Alloy Heating Element (Corrosion-Resistant) |
| Control System | Delta DOP-107EV Color Touch HMI + PLC-Based PID Algorithm |
| Temperature Sensor | PT-100 Platinum RTD (Class A, ±0.15 °C) |
| Pressure Indication | Analog Bourdon Tube Gauge (0–300 kPa, ±1.6% FS) |
| Humidity Control | Saturated Steam Generation with Auto-Water Refill (No Downtime Required) |
| Compliance | GB/T 10586–1989, GB/T 2423.3–2016 (IEC 60068-2-3), MIL-STD-810G Method 502.5, GJB 150.9A–2009, GB/T 2423.34–2012 (IEC 60068-2-52), MIL-STD-883K Method 1004.2 |
| Brand | Hengping |
|---|---|
| Origin | Shanghai, China |
| Model | High-Low Temperature Constant-Temperature Bath |
| Temperature Range | Typically –40 °C to +100 °C (configurable) |
| Temperature Stability | ±0.05 °C |
| Circulation Flow Rate | Up to 20 L/min |
| Bath Volume | 15–50 L (customizable) |
| Control Method | PID Auto-Tuning Digital Controller |
| Display | High-Brightness LED Numeric Display |
| Construction | Full 304 Stainless Steel |
| Cooling Method | Air-Cooled Compressor System |
| Heating Method | Immersed Electric Heater |
| External Circulation Interface | Dual Quick-Connect Fittings (Inlet/Outlet) |
| Brand | Henven |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | Custom-Engineered |
| Price Range | USD 140,000 – 280,000 |
| High-Temperature Range | 1400 °C |
| Low-Temperature Range | −20 °C |
| Thermal Shock ΔT Range | 1420 °C |
| Temperature Stability | ±0.5 °C |
| Heating Rate | 80 °C/min |
| Cooling Rate | 80 °C/min |
| Brand | HESON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HS-1000B |
| Instrument Type | Upright Chamber |
| Humidity Range | 20–98% RH |
| Temperature Fluctuation | ±0.5°C |
| Humidity Deviation | ±2.0% RH |
| Heating Rate | 1–3°C/min |
| Brand | HESON |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | HS-408A (Large-Scale High-Low Temperature Environmental Test Chamber) |
| Temperature Deviation | ±2.0°C |
| Heating Time | ≤60 min (from 20°C to 100°C) |
| Cooling Time | ≤40 min (to −20°C) / ≤60 min (to −40°C) / ≤80 min (to −70°C) |
| Temperature Range Options | A: −20°C to +150°C |
| B | −40°C to +150°C |
| C | −70°C to +150°C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ±2.0°C |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | 1–3°C/min |
| Cooling Rate | 0.7–1.0°C/min |
| Internal Dimensions (W×D×H) | 600 × 800 × 850 mm |
| Internal Material | SUS#304 Stainless Steel |
| External Material | SUS#304 Stainless Steel + Powder-Coated Finish |
| Insulation | High-Density PU Foam with Vacuum-Sealed Layer |
| Control Resolution | 0.01°C |
| Temperature Control Accuracy | ±0.3°C |
| Power Supply | AC 380V ±10%, 50 Hz, 3-phase 4-wire |
| Communication Interface | RS-232 with PC-compatible control software |
| Safety Protections | Leakage current cutoff, compressor high-pressure/overheat/overcurrent protection, fan overheat protection, fuse overload protection, audible alarm |