Gas Detector
Filter
Showing 301–330 of 1055 results
| Brand | Axetris |
|---|---|
| Origin | Switzerland |
| Model | EMIRS200, EMIRS50 |
| Housing | TO-39 metal can |
| Emitter Type | MEMS micro-hotplate with dielectric thin-film coating |
| Spectral Range | 2–16 µm (blackbody-like emission) |
| Modulation Capability | Direct electrical square-wave modulation (chopper-free) |
| Typical Power Consumption | <150 mW (EMIRS200), <300 mW (EMIRS50) |
| Radiant Efficiency | >30% (relative to ideal blackbody at same temperature) |
| Lifetime | >100,000 hours (at nominal drive conditions) |
| Environmental Certification | IEC 60747-17 / IEC 62047-21 compliant |
| Window Options | Sapphire (Al₂O₃), CaF₂, BaF₂, Ge |
| Mounting | Standard TO-39 header with optional reflective cup or protective cap |
| Brand | Axetris |
|---|---|
| Origin | Switzerland |
| Model | LGD F200 H |
| Instrument Type | Online |
| Detectable Gases | NH₃, HCl |
| Response Time | 2 s |
| Measurement Accuracy | ±2% of reading |
| Measurement Range | 0–100 ppm |
| Operating Temperature (Heated Version) | up to 220 °C |
| Detection Principle | Tunable Diode Laser Absorption Spectroscopy (TDLAS) |
| Brand | Axetris |
|---|---|
| Origin | Switzerland |
| Model | LGD HCL Series |
| Instrument Type | Online |
| Target Gas | Hydrogen Chloride (HCl) |
| Response Time | 2 s |
| Measurement Accuracy | ±0.8 ppm |
| Measurement Range | 0–50 ppm |
| Brand | Axetris |
|---|---|
| Origin | Switzerland |
| Model | LGD NH3 Series |
| Type | OEM-integrated online gas detection module |
| Detection Principle | Tunable Diode Laser Absorption Spectroscopy (TDLAS) |
| Target Gas | NH₃ (Ammonia) |
| Also Detects | H₂O, HCl (configurable) |
| Design | Modular, self-contained optical sensor unit |
| Calibration | Factory-calibrated |
| Response Time | <1 s (T₉₀) |
| Operating Temperature Range | –20 °C to +60 °C (standard) |
| high-temp option | up to 190 °C or 220 °C (heated probe variant) |
| Output Interface | Analog (4–20 mA, 0–10 V), digital (RS-485, Modbus RTU), optional Ethernet/IP or CAN bus |
| Enclosure Rating | IP65 (standard) |
| Compliance | CE, RoHS, EMC Directive 2014/30/EU |
| Software Support | Axetris LGD Configuration & Monitoring Suite (Windows/Linux) |
| Brand | Axetris |
|---|---|
| Origin | Switzerland |
| Model | LGD Series |
| Detection Gases | NH₃, CH₄, H₂O, CO₂, HCl, HF, O₂ |
| Technology | Tunable Diode Laser Spectroscopy (TDLS) |
| Design | OEM-ready modular platform |
| Operating Temperature (heated option) | up to 190 °C |
| Measurement Principle | Non-contact, optical absorption spectroscopy |
| Calibration | Factory-calibrated |
| Cross-Interference | Negligible due to narrow-linewidth laser targeting fundamental ro-vibrational absorption lines |
| Brand | Axetris |
|---|---|
| Origin | Switzerland |
| Model | LGD Series |
| Detection Principle | Tunable Diode Laser Absorption Spectroscopy (TDLAS) |
| Target Gases | NH₃, CH₄, H₂O, CO₂, HCl, HF, O₂, and trace impurities in high-purity gases (He, H₂, N₂, CO₂) |
| Measurement Mode | Non-contact, in-situ or extractive |
| Response Time | <1 s (typ.) |
| Operating Temperature Range | –20 °C to +60 °C (standard) |
| Calibration | Factory-calibrated |
| Compliance | Designed for integration into systems compliant with IEC 61508 (SIL2 capable), CE, RoHS, and EMC Directive 2014/30/EU |
| Enclosure Rating | IP65 (module housing) |
| Brand | Axetris |
|---|---|
| Origin | Switzerland |
| Model | LGD Series |
| Detection Principle | Tunable Diode Laser Absorption Spectroscopy (TDLAS) |
| Target Gases | NH₃, CH₄, H₂O, CO₂, HCl, HF, O₂ |
| Design | OEM-ready modular optical sensor |
| Operating Temperature Range (Heated Option) | Up to 190 °C |
| Measurement Type | Non-contact, in-situ, continuous |
| Cross-Interference | Negligible due to spectral selectivity |
| Calibration | Factory-calibrated |
| Compliance Context | Designed for integration into systems compliant with IEC 61508 (SIL2-capable architectures), EN 14181 (QAL3), and EPA Method 205/207 (for extractive TDLAS configurations) |
| Brand | AZ (Beijing Aozuo) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | iChamber-G |
| Pricing | Upon Request |
| Data Logger CPU | 32-bit FPU processor, 180 MHz |
| Sensor Channels | 40 SDI-12 ports (expandable) |
| Memory | 512 MB |
| Display | 2.54" OLED |
| Connectivity | Integrated 4G module with embedded IoT SIM card |
| CH₄ Range | 0–100 ppm, Accuracy ≤10 ppb |
| N₂O Range | 0–100 ppm, Accuracy ≤10 ppb |
| CO₂ Range | 0–10,000 ppm, Accuracy ≤0.15 ppm |
| NO Range | 0–100 ppm, Accuracy ≤10 ppb |
| H₂O Range | 0–5% v/v, Accuracy ≤1 ppm |
| Soil Gas Probe Pore Size | 0.1 µm |
| Gas Exchange Surface Area | 110 cm² |
| Cavity Volume | 20 mL |
| Probe Diameter | 12 mm |
| Probe Length Options | 150 mm or 300 mm |
| Tubing Length | Standard 3 m (extendable to 5 m) |
| Brand | AZ (Beijing AoZuo Ecological Instruments Co., Ltd.) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | LP-100 |
| Measurement Method | Controlled-airflow particle resuspension coupled with real-time optical particle detection |
| Measured Parameters | TSP, PM₁₀, PM₂.₅, PM₁.₀ dust retention per unit leaf area |
| Measurement Range | 0–60 mg/m³ (indicator range), 0–6 mg/m³ (quantitative accuracy range) |
| Measurement Interval | 1 s – 4 h |
| Sampling Flow Rate | 600 cm³/min |
| LOD | 0.01 µg/m³ |
| Flow Stability | ±0.1% over 5-min measurement cycle |
| Particle Size Detection Range | 0.5–20 µm (aerodynamic diameter) |
| Wind Speed Range (integrated sensor) | 0–60 m/s, resolution 0.1 m/s, accuracy ±3% |
| Temperature Range | −40 to +55 °C, resolution 0.1 °C, accuracy ±0.2 °C |
| Relative Humidity Range | 1–100%, resolution 0.1%, accuracy ±3–5% |
| Rainfall Rate Range | 0–4 mm/min, resolution 0.1 mm, accuracy ±4% |
| Brand | Baoying |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | C800 |
| Price Range | USD 14,000 – 57,000 |
| Brand | Baseline |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Baseline 9000 |
| Detection Principle | Flame Ionization Detection (FID) |
| Instrument Type | Benchtop Laboratory Analyzer |
| Configuration | Multi-Component VOC Analyzer |
| Detection Limit | <0.1 ppm (as propane) |
| Measuring Range | 10 ppm–10% (propane) or 10 ppm–50% (methane), factory-configurable per application |
| Operating Sample Temperature | Up to 191°C (376°F) |
| Sample Filtration Requirement | Pre-filtered, non-condensing, particle size <10 µm |
| Display | Graphical LCD with real-time parameter visualization |
| Communication Interfaces | RS-232/RS-485 serial, Ethernet, analog (4–20 mA / 0–10 V), digital I/O, relay outputs |
| Calibration | User-scheduled automatic zero/span calibration |
| Flow Control | Electronic FlowGuard™ system with integrated fuel/air/sample flow regulation, electronic back-pressure regulator, and sample bypass |
| Ignition | Automatic FID ignition sequence |
| Software | 9000 Keeper PC Utility for method storage, configuration upload/download, and firmware management |
| Mounting Options | Benchtop or 19-inch rack-mountable |
| Compliance | Designed for use in environments requiring EPA Method 25A, ASTM D6348, ISO 11843-2, and USP <467> compliant VOC monitoring workflows |
| Brand | Baseline |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BASELINE piD-TECH eVx |
| Pricing | Available Upon Request |
| Brand | Baseline |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | eV-NXT 045-110 |
| Price | Upon Request |
| Detection Range | 0–10,000 ppm |
| LOD | 500 ppb |
| T90 Response Time | < 3.5 s |
| Typical Sensitivity | 0.6 mV/ppm |
| Calibration Gas | 2000 ppm Isobutylene (standard) |
| Operating Temperature | –20 °C to +50 °C |
| Operating Humidity | 0–95% RH (non-condensing) |
| Power Supply | 3.3 V DC nominal |
| Power Consumption | < 80 mW (active mode) |
| Brand | Baseline |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | eV-NXT 045-111 |
| Detection Range | 0–2,000 ppm |
| LOD | 100 ppb |
| T90 Response Time | < 3.5 s |
| Typical Sensitivity | 2.4 mV/ppm |
| Measurement Condition | 100 ppm |
| Operating Voltage | Low-Voltage DC |
| Power Consumption | Ultra-Low |
| Intrinsic Safety Rating | Certified |
| Onboard Fault Detection | Yes |
| Brand | Baseline |
|---|---|
| Origin | USA |
| Model | eV-NXT 045-112 |
| Detection Range | 0–200 ppm |
| LOD | 10 ppb |
| T90 | < 3.5 s |
| Typical Sensitivity | 12 mV/ppm |
| Operating Condition | 100 ppm |
| Power Requirements | Low-voltage, low-power design |
| Compliance | Intrinsically Safe (IS) certified |
| Brand | Baseline |
|---|---|
| Origin | USA |
| Model | eV-NXT 045-113 |
| Detection Range | 0–20 ppm |
| LOD | 1.0 ppb |
| T90 | < 6.5 s |
| Typical Sensitivity | 118 mV/ppm |
| Measurement Condition | 10 ppm |
| Operating Voltage | Low-Voltage DC |
| Brand | Baseline |
|---|---|
| Origin | USA |
| Model | eV-NXT 045-114 |
| Detection Range | 4 ppm |
| LOD | 0.5 ppb |
| T90 | < 6.5 s |
| Typical Sensitivity | 545 mV/ppm |
| Measurement Condition | 1 ppm |
| Brand | Baseline |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | BASELINE PID-TECH eV-NXT |
| Pricing | Available Upon Request |
| Brand | Baseline |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | piD-TECH® eVx™ 045-010 |
| Pricing | Available Upon Request |
| Certification | UL, CAN/CSA C22.2 No. 60079-0, ATEX II 2G Ex d [ia] IIC T4 Ga, IECEx Ex d [ia] IIC T4 Ga |
| Detection Range | 0–10,000 ppm isobutylene equivalent |
| Minimum Detectable Quantity (MDQ) | 500 ppb (isobutylene) |
| T90 Response Time | < 2 s (typical) |
| Lamp Lifetime | > 12,000 hours |
| Operating Temperature | –20 °C to +50 °C |
| Humidity Range | 0–95% RH (non-condensing) |
| Output Signal | 0–5 V DC analog |
| Power Supply | 5.0 V ±0.1 V DC |
| Ingress Protection | IP67-rated housing |
| Filter Configuration | Dual-stage particulate & hydrophobic membrane filter |
| Temperature Drift | < 0.05% FS/°C |
| Humidity Compensation | Electrode-based active suppression |
| Brand | Baseline |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | piD-TECH® eVx™ 045-011 |
| Price | Upon Request |
| Detection Range | 2,000 ppm |
| Minimum Detectable Quantity (MDQ) | 100 ppb |
| T90 Response Time | < 2 s (typical) |
| Certification | UL, CAN/CSA, ATEX, IECEx |
| Design | Intrinsically Safe, 4-Series Compatible Form Factor |
| Lamp Lifetime | Extended Operational Life |
| Temperature Sensitivity | Negligible |
| Humidity Compensation | Electrode-Based Suppression |
| Filtering | Dual-Stage Particle Protection |
| Signal Stability | Internal Linear Regulator Circuitry |
| Maintenance | Field-Serviceable, Cleanable Electrodes |
| Brand | Baseline |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | piD-TECH® eVx™ 045-013 |
| Price | Upon Request |
| Detection Range | 20 ppm |
| Minimum Detectable Quantity (MDQ) | 1.5 ppb |
| T90 Response Time | < 4 s (typical) |
| Housing Color | Yellow |
| Certification | UL, CAN/CSA, ATEX, IECEx |
| Sensor Architecture | 4-Series Compatible |
| Lamp Type | Long-Life UV Lamp (10.6 eV) |
| Internal Regulation | Dual Linear Voltage Regulators |
| Filtration | Dual-Stage Particle Filter |
| Humidity Compensation | Electrode-Based Suppression |
| Thermal Drift | Negligible |
| Maintenance | Field-Serviceable & Cleanable |
| Brand | Baseline |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | piD-TECH® eVx™ 045-014 |
| Pricing | Available Upon Request |
| Detection Range | 2 ppm |
| Minimum Detectable Quantity (MDQ) | 0.5 ppb |
| T90 Response Time | < 4 s (typical) |
| Certification | UL, CAN/CSA C/US, ATEX II 1G, IECEx Ex ia IIC T4 Ga |
| Sensor Architecture | 4-Series Compatible Form Factor |
| Lamp Life | > 12,000 hours |
| Operating Temperature Range | –20 °C to +50 °C |
| Humidity Compensation | Electrode-based suppression |
| Filtering | Dual-stage particulate protection |
| Power Supply | Internal linear regulation for signal stability |
| Maintenance | Field-serviceable, cleanable electrode assembly |
| Brand | Baseline |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | piD-TECH® eVx™ |
| Detection Range | 0–2,000 ppm |
| Minimum Detectable Quantity (MDQ) | 10 ppb |
| T90 Response Time | < 2 s (typical) |
| Certifications | UL, CAN/CSA C22.2 No. 152, ATEX II 2G Ex ia IIC T4 Ga, IECEx Ex ia IIC T4 Ga |
| Intrinsic Safety Design | Yes |
| Lamp Lifetime | > 12,000 hours |
| Operating Temperature | –20 °C to +50 °C |
| Humidity Compensation | Electrode-based humidity suppression |
| Dual-Stage Particle Filtration | Integrated |
| Signal Stability | Internal linear voltage regulation |
| Structural Compatibility | 4-Series electrochemical sensor footprint |
| Brand | BCC |
|---|---|
| Origin | Hebei, China |
| Model | BKS-3000 |
| Instrument Type | Flue Gas CEMS |
| Accuracy | ≤±1% FS/24h |
| Repeatability | ≤±1% FS/24h |
| Response Time | ≤10 s |
| Stability (Zero/Scale Drift) | ≤±1% FS/24h (gaseous), negligible drift (particulate) |
| Measured Parameters | SO₂, NOₓ (NO, NO₂, N₂O), CO, CO₂, SO₃, CH₄, O₂, HCl, NH₃, HF, H₂S, H₂O, particulate matter (PM) |
| Detection Methods | Non-Dispersive Infrared (NDIR), Tunable Diode Laser Absorption Spectroscopy (TDLAS), UV Differential Optical Absorption Spectroscopy (UV-DOAS), Electrochemical (O₂), Optical Scattering (PM) |
| Output Interfaces | RS232, RS485, 4–20 mA, Ethernet, 4G/5G cellular |
| Brand | BCC |
|---|---|
| Origin | Hebei, China |
| Model | KPV-2000 |
| Instrument Type | Continuous Emission Monitoring System (CEMS) |
| Measurement Parameters | Temperature, Pressure, Velocity |
| Temperature Range | 0–500 °C (customizable up to 1100 °C) |
| Pressure Range | −8 to +8 kPa |
| Velocity Range | 5–40 m/s |
| Measurement Methods | Pt100 resistance thermometer (temperature), piezoresistive pressure transducer (pressure), Pitot tube differential pressure method (velocity) |
| Accuracy | ±2% relative error |
| Power Consumption | < 0.04 kVA |
| Output Signal | 4–20 mA analog |
| Environmental Rating | Rated for continuous operation at ambient housing temperatures up to 1100 °C |
| Additional Feature | Integrated automatic purge system |
| Brand | BCC |
|---|---|
| Origin | Hebei, China |
| Model | KSP-L-1000 (Extractive) |
| Measurement Principle | Laser Light Scattering |
| Safety Rating | Non-Explosive |
| Measurement Range | 0–5–200 mg/m³ |
| Resolution | 0.01 mg/m³ |
| Accuracy | ±2% FS |
| Relative Error | ≤±2% FS |
| Zero Drift | ≤±2% FS/24h |
| Span Drift | ≤±2% FS/24h |
| Detection Limit | 0.01 mg/m³ |
| Sampling Flow Rate | Up to 250 L/min |
| Heating Temperature | Full-Path Heated Sampling Line (Typical Setpoint: 120–180°C) |
| Calibration | Automated Zero & Span Calibration |
| Carrier Gas | Integrated Air Pump (Frost-Resistant Design) |
| Brand | BCC |
|---|---|
| Origin | Hebei, China |
| Model | MGA-3000 |
| Detection Principle | Non-Dispersive Infrared (NDIR) Spectroscopy |
| Target Analytes | Ethyl Mercaptan, Tetrahydrothiophene (THT), Acrylic Ester |
| Measurement Range | 0–100 ppm |
| Accuracy | ±1 ppm or ±2% of reading (whichever is greater) |
| Zero/ Span Drift | ≤±2% FS/24 h |
| Response Time (T90) | ≤90 s |
| Sampling Method | Extractive |
| Output Interfaces | 4–20 mA, RS-232 / RS-485, USB, Ethernet |
| Enclosure Rating | IP65 |
| Explosion Protection | Ex d IIB T4 Gb |
| Power Supply | 220 V AC |
| Brand | BCC |
|---|---|
| Model | MGA-3000 |
| Principle | Non-Dispersive Infrared (NDIR) Absorption |
| Configuration | Fixed-Mount |
| Detection Range | 0–10 / 50 / 100 / 500 / 1000 ppm to 100% vol (gas-dependent, customizable) |
| Sensitivity | 1 ppb |
| Response Time | T90 ≤ 60 s |
| Repeatability | ≤ ±1 % FS |
| Accuracy | ≤ ±2 % FS |
| Zero Drift | ≤ ±1 % FS / 24 h |
| Detection Limit | 0.1–1 ppm (varies by target gas) |
| Output Interfaces | 4–20 mA, RS232/RS485, USB, Ethernet |
| Enclosure Options | 19″ rack-mount, benchtop, portable |
| Brand | BCC |
|---|---|
| Origin | Hebei, China |
| Model | MGA-3000Ex |
| Principle | Non-Dispersive Infrared (NDIR) Absorption |
| Type | Fixed-Mount Industrial Analyzer |
| Detection Range | 1 ppb to 100% vol |
| Sensitivity | 1 ppb (for select gases) |
| Response Time | T90 ≤ 60 s |
| Repeatability | ≤ ±1% FS |
| Accuracy | ±0.1–2% FS (gas-dependent) |
| Zero/Full-Scale Auto-Calibration | Yes |
| Drift | ≤ ±1% FS / 24 h |
| Output Interfaces | 4–20 mA, RS232/RS485, USB, Ethernet (TCP/IP) |
| Enclosure Options | 19" rack-mount, benchtop |
| Certified Protection | Ex d IIB T4 Gb / Ex tb IIIC T130°C Db (IEC 60079-0, -1, -7, -31) |
| Brand | BCC |
|---|---|
| Origin | Hebei, China |
| Model | MGA-3000P (Ammonia-Specific) |
| Principle | Non-Dispersive Infrared (NDIR) Absorption |
| Type | Portable Multicomponent Gas Analyzer |
| Measurement Range | 1 ppb to 100% vol NH₃ (customizable) |
| Sensitivity | 1 ppb (NH₃) |
| Response Time | T₉₀ ≤ 20 s |
| Repeatability | ±1–2% FS |
| Zero/ Span Drift | ≤ ±1% FS / 24 h |
| Power Consumption | < 100 W |
| Output Interfaces | 4–20 mA, RS232 / RS485, USB, Ethernet (TCP/IP) |