General Meters & Instruments
Filter
Showing 61–90 of 114 results
| Brand | B-plus |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | KM-B17575-BTD-004-0TB3 |
| Price Range | USD 1,400 – 28,000 |
| Brand | Keithley (Tektronix) |
|---|---|
| Model | 2400 |
| Type | Single-Channel Precision SourceMeter |
| Source/Measure Capability | 4-Quadrant Operation |
| Voltage Range | 1 µV to 1100 V |
| Current Range | 10 pA to 10 A |
| Power Rating | 20 W DC / 1000 W Pulsed |
| Basic Accuracy | 0.012% (6½-digit resolution) |
| Sampling Rate | Up to 1700 readings/sec (4½-digit) |
| Interfaces | GPIB, RS-232, Trigger Link |
| Remote Sensing | 2-, 4-, and 6-wire |
| Programmable DIO Ports | Yes |
| Compliance Standards | ASTM F1957, ISO/IEC 17025 (when used in accredited labs), GLP/GMP-ready with audit trail-capable software |
| Brand | KEYENCE |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | SJ-E |
| Pricing | Available Upon Request |
| Brand | Lake Shore |
|---|---|
| Origin | USA |
| Model | M81-SSM |
| Channel Configuration | 1–3 Source + 1–3 Measurement Channels |
| Frequency Range | DC to 100 kHz |
| Sampling Rate | 375 kSa/s |
| Dynamic Reserve | >120 dB |
| Phase Noise | <0.0001° RMS (internal ref, 10 kHz, 100 ms TC, 12 dB/oct) |
| THD | <0.1% (DC–100 kHz, typical) |
| Source Resolution | 6-digit frequency display, resolution >100 µHz |
| Measurement Modes | DC, AC RMS/peak, lock-in (X/Y, R/Θ), harmonic detection (up to 9th order) |
| Compliance Voltage/Current | ±10 V / ±100 mA (BCS-10, VS-10) |
| Input Bias Voltage | Near-zero (CM-10) |
| Voltage Sensitivity | Down to nV (VM-10) |
| Current Sensitivity | Down to fA (CM-10) |
| Interface | USB, Ethernet, GPIB |
| Display | 5″ capacitive touchscreen (800×480 WVGA) |
| Warm-up Time | 60 min to full specification |
| Isolation | Measurement common isolated from chassis ground |
| Brand | Leichi |
|---|---|
| Model | PHGF Series |
| Type | pH and ORP Transmitter |
| Mounting Options | Submersible or Flow-Through |
| Integrated Pre-Amplifier Board | Yes (PHGF-27B, PHGF-28B, PHGF-43), No (PHGF-46) |
| Cable Length | 20 m (PHGF-27B, PHGF-28B, PHGF-43), 10 m (PHGF-46) |
| Operating Temperature Range | 5–60 °C or 20–90 °C (selectable for PHGF-27B & PHGF-28B), 5–45 °C (PHGF-43), 5–55 °C (PHGF-46) |
| Compatible Electrodes | FG-990 (pH), ORP-1 (ORP), FG-991 (pH), FG-991A (pH), FG-990T-819-A (high-temp pH) |
| Brand | Leichi |
|---|---|
| Model | PHGF Series |
| Type | pH and ORP Transmitter |
| Mounting Options | Submersible (PHGF-27B, PHGF-28B, PHGF-43) / Flow-Through (PHGF-28B, PHGF-46) |
| Integrated Pre-amplifier Board | Yes (PHGF-27B, PHGF-28B, PHGF-43) / No (PHGF-46) |
| Cable Length | 20 m (PHGF-27B, PHGF-28B, PHGF-43) / 10 m (PHGF-46) |
| Operating Temperature Range | 5–60 °C or 20–90 °C (selectable, PHGF-27B & PHGF-28B) / 5–45 °C (PHGF-43) / 5–55 °C (PHGF-46) |
| Compatible Electrodes | FG-990 (pH), ORP-1 (ORP) |
| Brand | Liquid Instruments |
|---|---|
| Origin | Australia |
| Model | Moku:Lab |
| Frequency Range | DC–200 MHz |
| Dynamic Reserve | Up to 100 dB |
| Demodulation Modes | Dual-phase (X/Y, R/θ) |
| Input Gain Options | −20 dB / 0 dB / +24 dB / +48 dB |
| Input Impedance | 50 Ω / 1 MΩ |
| Time Constant Range | 40 ns – 0.6 s |
| Filter Roll-off | 6 dB/octave or 12 dB/octave |
| Phase Accuracy | ±0.001° |
| Frequency Resolution | 3.55 µHz |
| Sampling Rate (Oscilloscope Mode) | up to 500 MSa/s |
| Data Logging Rate | up to 1 MSa/s |
| Internal LO Output | up to 200 MHz, adjustable amplitude |
| Brand | Megger |
|---|---|
| Origin | USA |
| Model | FREJA 546 |
| Output | 3× AC Current Channels (60 A rms, 300 V rms per phase) |
| Accuracy | ±0.05% rdg + 0.02% range (voltage/current) |
| Operating Temperature | 0°C to 50°C |
| Weight | 13.2 kg |
| Dimensions | 337 × 172 × 273 mm |
| Brand | Megger |
|---|---|
| Origin | United Kingdom |
| Model | SMRT43D |
| Output Channels | 4 Voltage, 3 Current (expandable to 6 current via VIGEN channel conversion) |
| Max Current Output | 135 A (single-phase, 900 VA peak) |
| Max Voltage Output | 300 V AC (per channel, 150 VA) |
| Touchscreen Display | 7-inch full-color high-resolution TFT LED |
| Compliance | EN 61010-1, EN 61326-2-1, EN 61000-4-x, IEC 61850 GOOSE/SV support |
| Operating Temperature | 0–50 °C |
| Weight | 13.2 kg (with 3 VIGEN modules) |
| Dimensions | 337 × 172 × 273 mm (W×H×D) |
| Brand | Megger |
|---|---|
| Origin | USA |
| Model | SVERKER 900 |
| Output Voltage | 900 V AC (per phase), 900 V DC |
| Output Current | 105 A AC (per channel), 10 A DC |
| Frequency Range | 10 Hz – 600 Hz + DC |
| Channels | 3 independent current sources, 4 independent voltage sources |
| Phase Angle Adjustment | 0°–360°, resolution ≤ 0.1° |
| Isolation | Fully galvanically isolated between all outputs and earth |
| Operating Temperature | 0°C to +50°C |
| IP Rating | IP2X (enclosure), compliant with IEC 61010-1:2010 |
| Safety Compliance | CE marked per IEC 61326-1 (EMC) and IEC 61010-1 (LVD) |
| Dimensions (unit) | 350 × 270 × 220 mm |
| Weight | 14.9 kg |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Region of Manufacture | Domestic (China) |
| Model | ACM500 |
| Pricing | Available Upon Request |
| Enclosure | Stainless Steel, IP66 Rated |
| Hazardous Area Certifications | UL/cUL Class I, II, III Div 1 Groups A–G (Entity) |
| Communication Interfaces | Fiber Optic, Intrinsically Safe Current Loop, Ethernet (10/100BASE-T), RS-232/RS-485 (expandable via COM3 option board) |
| I/O Expansion | Up to 12 digital inputs & 18 digital outputs (with ARM100 + COM3) |
| Dimensions | 210 × 265 × 106 mm (8.3 × 10.4 × 4.2 in.) |
| Power Supply | 100–240 VAC, 50/60 Hz, 250 mA |
| Brand | METTLER TOLEDO |
|---|---|
| Model | AWS-ZRCD30 |
| Type | Integrated Curved-Plate WIM Sensor System |
| Compliance | Designed for ASTM E1318, ISO 12098, and EN 1430–1432 Class C compatible deployment |
| Output Interface | RS-485, Ethernet (TCP/IP), Modbus RTU/TCP |
| Dynamic Accuracy | ≤ ±2.5% of reading (per axle, compliant with OIML R134 Class C requirements under controlled traffic conditions) |
| Operating Temperature Range | –30 °C to +70 °C |
| IP Rating | IP68 (sensor plate), IP54 (enclosure) |
| Fatigue Life | ≥3 million axle passes (validated per ISO 14224) |
| Overload Capacity | ≥150% F.S. (static), ≥200% F.S. (impact transient) |
| Detection Capabilities | Axle weight, gross vehicle weight (GVW), axle spacing, axle count, vehicle speed, wheel configuration, vehicle class (up to 6 axle groups), direction of travel |
| Anti-Cheating Features | Dual-sensor interleaved layout, real-time dynamic waveform analysis, S-curve & edge-pressure anomaly detection, synchronized dual-channel AxlemateD signal processing |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Model | EasyDirect™ |
| Interface Support | RS232, USB, Ethernet |
| Maximum Instrument Connectivity | 3–10 units depending on module |
| Regulatory Alignment | Designed for GLP/GMP-compliant environments with audit trail readiness |
| Brand | METTLER TOLEDO |
|---|---|
| Model | ICS429/439 |
| Protection Rating | IP68/IP69K |
| Display | LCD dot-matrix |
| Data Display Modes | 3 configurable formats |
| Hygienic Design Compliance | EHEDG, NSF |
| Built-in Smart Counter | Yes |
| Certification Status Indication | On-screen dynamic marking |
| Sealing | Dual-layer waterproof sealing |
| Mounting Flexibility | Compact t-/f-/s- mounting variants |
| Special Functions | Animal Weighing, MinWeigh |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Jiangsu, China |
| Model | IND231 / IND236 |
| Protection Rating | IP54 (IND231), IP66/IP67 (IND236) |
| Load Cell Interface | Analog, supports up to one 4-wire 350 Ω load cell |
| Communication Interfaces | RS232 (standard), optional isolated RS232/RS422/RS485, USB, discrete I/O |
| Display | High-contrast LCD with 40 mm digit height and adjustable white backlight |
| Power Options | AC adapter or battery (rechargeable, extended-life design) |
| Application Modes | Weighing, checkweighing, counting, animal weighing, accumulation, unit conversion, date/time stamping |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | IND245 |
| Pricing | Available Upon Request |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Region Classification | Domestic (China) |
| Model | IND560x |
| Pricing | Upon Request |
| Enclosure Type | Panel-Mount (Stainless Steel Front / Aluminum Housing, IP65) or Dustproof (Full Stainless Steel, IP69K/IP68/IP65) |
| A/D Conversion Rate | >366 Hz (internal), 50 Hz preset comparison, 20 Hz PLC cycle, 25 Hz discrete I/O |
| Resolution (Certified) | US Class II – 100,000d |
| Connectivity | RS-232/422/485, 10Base-T Ethernet, AB RIO, Analog Output, DeviceNet, PROFIBUS DP, EtherNet/IP, Modbus TCP |
| Input Protocols | ASCII, CPTZ, SICS Level 0/1, Remote Display |
| Output Modes | METTLER TOLEDO Continuous Output, Command Output, Continuous Template Output, 5 Editable Templates |
| Discrete I/O | Standard 4-in/6-out solid-state |
| Supported Load Cells | Analog (5 VDC excitation, up to 4 × 350 Ω sensors, min. 87 Ω, 2–3 mV/V, 100,000d) or IDNet®/TBrick-Ex™ digital platforms |
| Dimensions (Panel) | 160 × 265 × 92 mm |
| Dimensions (Dustproof) | 184 × 289 × 160 mm |
| Mounting Options | Panel, Desktop, Wall, Pole |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | IND880 |
| Pricing | Available Upon Request |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Jiangsu, China |
| Model Range | IND880, IND780, IND690, IND560, IND331 |
| Protection Rating (IND690) | IP69K |
| Display | High-contrast, multi-language, BigWeight® safety-glass touchscreen (IND690) |
| Connectivity | RS232/485, Ethernet, USB, PROFIBUS, PROFINET, EtherNet/IP, DeviceNet, CANopen |
| Mounting Options | Panel, wall, pole, desktop |
| Compliance | Designed for GLP/GMP environments |
| Calibration | Multi-point linear & non-linear calibration, auto-zero tracking, span verification protocols |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | iSense Asset |
| Pricing | Available Upon Request |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | USA |
| Model | iSense Light |
| Type | Free ISM-compatible software tool |
| Licensing | No registration or certification required |
| Compatibility | Requires ISM-enabled sensors and iLink cable |
| Distribution | Imported |
| Vendor Status | Authorized Distributor |
| Pricing | Contact for quotation |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | M800 |
| Pricing | Upon Request |
| Brand | auniontech |
|---|---|
| Origin | Australia |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Moku:Pro |
| Price Range | USD $18,500 – $24,500 (FOB) |
| Origin | Israel |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Ranger |
| Price | USD 90,000 (FOB) |
| UV Sensitivity | 3 × 10⁻¹⁸ W/cm² |
| Field of View (H×V) | 5° × 3.75° |
| Focus Range | 3 m to ∞ |
| Dual-Channel Imaging | UV + Visible Light |
| Auto-Focus | Simultaneous UV & visible channels |
| Video Output | PAL/NTSC, RS-170/CCIR |
| Zoom | 25× optical + 12× digital |
| Display | 8.4″ SVGA LCD (800 × 600), 230 cd/m² |
| Operating Temperature | −20 °C to +55 °C (CDU) |
| Power Input | 9–16 VDC or 110/220 VAC |
| Power Consumption | <15 W |
| Pan/Tilt Range | 340°/360° horizontal, −90°/+60° vertical |
| Pan/Tilt Speed | up to 30°/s (horizontal), 10°/s (vertical) |
| Connector Standard | MIL-C-26482 compliant |
| Brand | OLYMPUS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (PRC) |
| Model | N/A |
| Pricing | Available Upon Request |
| Brand | Olympus |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | OmniScan MX2 |
| Pricing | Available Upon Request |
| Brand | Aisida |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | PCB Long-Arm Thickness Gauge |
| Pricing | Available Upon Request |
| Measurement Range | Up to 300 mm throat depth |
| Resolution | 0.001 mm |
| Accuracy | ±0.003 mm |
| Display | 4-digit LCD with mm/inch toggle |
| Zero Function | Adjustable at any position |
| Base Material | Precision-ground granite |
| Optional Software | SPC-compatible data export (CSV/Excel) |
| Brand | Binhenghong |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Producer |
| Origin Category | Domestic |
| Volume Options | 100 mL, 250 mL, 500 mL |
| Pricing | Upon Request |
| Material | Perfluoroalkoxy alkane (PFA) |
| Max. Continuous Use Temperature | +205 °C |
| Min. Operating Temperature | −205 °C |
| Transparency | Optically Clear |
| Seal Integrity | Threaded PFA cap with integrated O-ring seal |
| Chemical Resistance | Fully resistant to HF, aqua regia, hot conc. H₂SO₄, NaOH (short-term), and all organic solvents |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | PLC Industrial Control System |
| Pricing | Available Upon Request |
| Brand | Qinji |
|---|---|
| Origin | Shanghai, China |
| Model | QJBCJ- |
| Impact Energy Range | 5 J, 7.5 J, 15 J, 25 J, 50 J |
| Impact Velocity | 2.9 m/s |
| Pendulum Pre-Lift Angle | 160° |
| Distance from Pendulum Axis to Specimen Center | 230 mm |
| Support Span Options | 40 mm, 60 mm, 70 mm, 95 mm |
| Notch Knife Edge Angle | 30° |
| Knife Edge Radius | 2 mm |
| Anvil Radius | 1 mm |
| Dimensions (L×W×H) | 280 × 250 × 500 mm |
| Net Weight | 50 kg |
| Compliance | GB/T 1043, ISO 179-1, ISO 9854-1, DIN 8078, DIN 53453 |