- All
- Favorite
- Popular
- Most rated
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | TY-7006B Single-Speed |
| Roller Diameter | Ø120 mm |
| Roll Working Length | 320 mm |
| Roll Gap Adjustment Range | 0–3 mm |
| Roll Speed Ratio | 1:1.35 |
| Rear Roll Speed | 9.80 m/min |
| Front Roll Speed | 8.03 m/min |
| Batch Capacity | 0.5–1 kg |
| Motor Power | 2.2 kW (BWO220-23 Gearmotor) |
| Overall Dimensions (L×W×H) | 1350 × 770 × 1350 mm |
| Net Weight | ~400 kg |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TY-7008 |
| Screw Diameter | 20 mm |
| Length-to-Diameter Ratio | 1:25 |
| Overall Dimensions | 390 mm × 1500 mm × 1100 mm |
| Drive Power | 2.2 kW |
| Heating Zones | 5 (4 barrel + 1 die) |
| Screw Speed Range | 0–80 rpm (variable-frequency control) |
| Screw Material | 38CrMoAlA alloy steel, nitrided surface hardness HRC 55–60, surface roughness Ra < 0.4 µm, nitrided layer depth > 0.6 mm |
| Barrel Material | 38CrMoAlA alloy steel, same surface treatment as screw |
| Melt Pressure Range | 0–35 MPa |
| Filtration Mesh | 5–40 µm |
| Cooling System | 4-channel forced-air cooling with multi-wing fans |
| Gearbox | Hardened gear reducer, reduction ratio 18:1 |
| Motor | Panasonic servo motor |
| Gearbox Supplier | LIMIN (Taiwan) |
| Weight | 380 kg |
| Electrical Supply | AC 380 V, 50 Hz, 3-phase 5-wire |
| Brand | TYTESTER |
|---|---|
| Model | TYMP-II |
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Price Range | USD 1,400 – 2,100 |
| Wheel Linear Speed | 12 m/s |
| Coarse Wheel Specification | G260APRI 170×40×32 mm, 32-grit |
| Fine Wheel Specification | G260APRI 170×40×32 mm, 80-grit |
| Worktable Diameter | 160×44 mm |
| Center Height | 214 mm |
| Grinding Stroke | 20 mm |
| Sample Dimensions (L×W×H) | >260 mm × ≤36 mm × ≤8 mm |
| Overall Dimensions | 500×400×314 mm |
| Weight | 80 kg |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TY-7003 |
| Screw Diameter | 20 mm |
| Clamping Force | 5 T (adjustable up to 5 T via dual-toggle mechanism) |
| Maximum Shot Volume | 25 cm³ |
| Barrel Temperature Range | Up to 360 °C (3-zone heating) |
| Temperature Control Accuracy | ±0.5 °C (steady-state) |
| Power Supply | Single-phase AC 220 V ±10%, 50 Hz, 2.2 kW |
| Overall Dimensions | 1700 × 500 × 950 mm (L×W×H) |
| Length-to-Diameter Ratio | 20:1 |
| Injection Pressure | Up to 57 MPa (113 MPa with force-multiplying system) |
| Mold Opening Stroke | 70 mm (excluding mold thickness) |
| Hopper Capacity | 0.2 L |
| Injection Stroke Range | 0–80 mm |
| Injection Resolution | 0.1 mm |
| Feed Speed | 0.1–60 rpm (max 100 rpm, torque reduced beyond 60 rpm) |
| Safety | Dual mechanical & electronic interlock with acrylic safety guard |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | TY-5006UA |
| Temperature Control Range | RT to 300 °C |
| Heating Rate Options | (120 ± 10) °C/h or (50 ± 5) °C/h |
| Temperature Resolution | 0.1 °C |
| Deformation Measurement Range | 0–1.5 mm |
| Deformation Accuracy | ±0.001 mm |
| Sample Support Span | 64 mm or 100 mm |
| Thermal Expansion Coefficient of Test Frame | < 0.005 mm/100 °C |
| Load Rod & Platter Mass | 68 g |
| Heating Power | 4 kW |
| Dimensions (W × D × H) | 540 × 520 × 970 mm |
| Cooling Method | Natural cooling above 150 °C |
| Bath Medium | Methyl silicone oil (kinematic viscosity ~200 cSt) or transformer oil |
| Test Stations | 3 independent stations |
| Standard Compliance | GB/T 1633, GB/T 1634.1–3, GB/T 8802, ISO 306:2013, ISO 75-1–3:2003, ASTM D1525, ASTM D648 |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Model | TY-7007A |
| Price Range | USD 9,800 – 13,900 |
| Temperature Range | Ambient to 300 °C |
| Control System | PLC-based color touchscreen HMI |
| Heating Method | Electric heating |
| Temperature Accuracy | ±3 °C |
| Roll Dimensions | Ø120 mm × 350 mm (L) |
| Roll Gap Adjustment | 0–10 mm (motorized, micrometer-graduated) |
| Roll Material | Hard-chrome-plated alloy steel |
| Surface Hardness | HRC 58–62 |
| Surface Finish | Mirror-polished chrome |
| Roll Speed | 0–60 rpm (dual servo-driven, independently adjustable) |
| Speed Ratio Control | Continuously variable (1:1 to 1:3.5) |
| Total Power Consumption | 4 kW |
| Safety Systems | Mechanical pull-bar emergency stop, foot-activated reverse function, dual-hand safety interlock |
| Overall Dimensions (W×D×H) | 1030 × 520 × 1410 mm |
| Electrical Supply | AC 380 V, 3-phase, 5-wire |
Show next