- All
- Favorite
- Popular
- Most rated
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TY-7008 |
| Screw Diameter | 20 mm |
| Length-to-Diameter Ratio | 1:25 |
| Overall Dimensions | 390 mm × 1500 mm × 1100 mm |
| Drive Power | 2.2 kW |
| Heating Zones | 5 (4 barrel + 1 die) |
| Screw Speed Range | 0–80 rpm (variable-frequency control) |
| Screw Material | 38CrMoAlA alloy steel, nitrided surface hardness HRC 55–60, surface roughness Ra < 0.4 µm, nitrided layer depth > 0.6 mm |
| Barrel Material | 38CrMoAlA alloy steel, same surface treatment as screw |
| Melt Pressure Range | 0–35 MPa |
| Filtration Mesh | 5–40 µm |
| Cooling System | 4-channel forced-air cooling with multi-wing fans |
| Gearbox | Hardened gear reducer, reduction ratio 18:1 |
| Motor | Panasonic servo motor |
| Gearbox Supplier | LIMIN (Taiwan) |
| Weight | 380 kg |
| Electrical Supply | AC 380 V, 50 Hz, 3-phase 5-wire |
| Brand | TianYuan |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TY-7003 |
| Screw Diameter | 20 mm |
| Clamping Force | 5 T (adjustable up to 5 T via dual-toggle mechanism) |
| Maximum Shot Volume | 25 cm³ |
| Barrel Temperature Range | Up to 360 °C (3-zone heating) |
| Temperature Control Accuracy | ±0.5 °C (steady-state) |
| Power Supply | Single-phase AC 220 V ±10%, 50 Hz, 2.2 kW |
| Overall Dimensions | 1700 × 500 × 950 mm (L×W×H) |
| Length-to-Diameter Ratio | 20:1 |
| Injection Pressure | Up to 57 MPa (113 MPa with force-multiplying system) |
| Mold Opening Stroke | 70 mm (excluding mold thickness) |
| Hopper Capacity | 0.2 L |
| Injection Stroke Range | 0–80 mm |
| Injection Resolution | 0.1 mm |
| Feed Speed | 0.1–60 rpm (max 100 rpm, torque reduced beyond 60 rpm) |
| Safety | Dual mechanical & electronic interlock with acrylic safety guard |
Show next