- All
- Favorite
- Popular
- Most rated
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | PRESTO W50 |
| Temperature Range | −50 °C to +250 °C |
| Temperature Stability | ±0.05 °C to ±0.1 °C |
| Bath Volume | 1.5 L |
| Circulation Type | External |
| Temperature Control Mode | Refrigeration & Heating |
| Heating Power | 6.0 kW |
| Refrigeration Power (at −40 °C) | 0.6 kW |
| Pump Flow Rate | 35–76 L/min |
| Pump Pressure | 0.48–3.2 bar |
| Fluid Fill Volume | 7.5 L |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | WIND XL 500H |
| Nitrogen Purity Range | 95–99.999% |
| Nitrogen Flow Rate | 100–2000 N·L/min |
| Max Direct Output Pressure | 7.5 bar |
| Max Boosted Pressure | 20 bar |
| Display | 10-inch color touchscreen |
| Air inlet pretreatment | multi-stage filtration + refrigerated dryer |
| Noise level | 73 dB(A) ± 2 |
| Enclosure rating (air compressor motor) | IP54 |
| Communication interfaces | RS232, analog I/O, alarm relay outputs |
| Safety features | low-pressure alarm, auto-depressurization at shutdown, compressor overtemperature protection |
| Compliance | Designed for GLP/GMP-adjacent environments |
| meets ISO 8573-1 Class 2 | 2:2 for compressed air quality upstream of PSA unit |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Compression Principle | Piston-Type |
| Flow Rate | 0–40 L/min |
| Maximum Pressure | 0–9.5 bar |
| Dew Point | ≤3 °C (standard operation), down to –15 °C with integrated dryer |
| Particle Filtration | ≤0.01 µm (0.01 micrometer) |
| Oil & Water Content | Oil-free, <0.1 ppm total hydrocarbons |
| Tank Material | Stainless Steel (AISI 304) |
| Noise Level | 63 dB(A) |
| Power | 600 W |
| Tank Volume | 40 L |
| Dimensions (L×W×H) | 640 × 470 × 720 mm |
| Weight | 72 kg |
| Safety Compliance | Spring-loaded pressure relief valve (activates at >10 bar), thermal cut-off switch, digital pressure controller with adjustable start/stop setpoints |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | FID FLAT NM |
| Hydrogen Generation Principle | PEM Electrolysis of Deionized Water |
| Output Flow Rate | 100–1350 mL/min |
| Output Pressure | 11 bar (160 psig) |
| Hydrogen Purity | 99.99996% |
| Water Reservoir Capacity | 7 L |
| Internal Gas Volume | <50 mL |
| Dimensions (W×D×H) | 690 × 680 × 150 mm |
| Weight | 41–45 kg |
| Power Consumption | 90–450 W |
| Operating Environment | 15–40 °C, 0–80% RH (non-condensing) |
| Certifications | CE, CSA, FCC |
| Display | 128×64-pixel LCD with tactile buttons |
| Noise Level | ≤46 dB(A) |
| Max Load Capacity | 80 kg |
| Gas Outlet | 1/8" Swagelock |
| Water Resistivity Requirement | ≥5 MΩ·cm (min. 1 MΩ·cm acceptable) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | T300 |
| Display | TFT LCD |
| Pipetting/Dosing Volume Options | 20 mL or 50 mL Duran® borosilicate glass burettes |
| Tubing Material | PTFE |
| Dosing Accuracy | ±0.15% systematic error, ±0.05% random error (per EN ISO 8655-6) |
| Flow Rate Control | 5 adjustable speed levels |
| Connectivity | 1× USB-A, 1× USB-B, 2× RS-232-C |
| Stirring Interface | Compatible with TM50 magnetic stirrer (M2 kit standard) |
| Software Integration | TitriSoft™ for remote operation, method storage, audit trail, and data export (USB drive, print) |
| Weighing Interface | Optional integration with analytical balances via RS-232 |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Dimensions (w×d×h) | 135 × 310 × 205 mm (with burette, excluding stirrer) |
| Weight | 2.0 kg (without stirrer) |
| Compliance | EN ISO 8655-6 (volumetric accuracy), CE marked |
| Wetted Materials | PTFE, Duran® borosilicate glass, FEP-coated components |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | WHISPER Hybrid |
| Nitrogen Flow Rate | 12–120 L/min @ 7 bar |
| Air Flow Rate (A) | 22–70 L/min @ 7 bar |
| Air Flow Rate (B) | 10–25 L/min @ 4 bar |
| Input Air Requirement | 96–694 L/min |
| Output Purity | 95–99% N₂ |
| Dew Point | ≤ −40 °C |
| Particle Filtration | ISO 8573-1:2010 Class 1.2.1 |
| Pressure Range | Adjustable 8.5–10 bar |
| Membrane Pore Size | 40 nm |
| Fiber ID | 0.3 mm |
| Operating Temperature | 15–35 °C |
| Certifications | CE, FCC, CSA |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | WFA-840D / WFA-860D / WFA-840E |
| Stirring Positions | 4 / 6 / 4 |
| Speed Range (rpm) | 10–300 / 10–300 / 0–200 |
| Speed Resolution | 1 / 1 / 1 rpm |
| Speed Accuracy | ±1 / ±1 / — rpm |
| Display | LED / LED / Scale + Knob |
| Backlight | Yes / Yes / Yes |
| Timer Range | 0–99 h or 0–999 min / OFF or 0–99 h or 0–999 min / 0–30 min or Continuous |
| Power Consumption | 11 W / 19 W / 6 W |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | RACK-PG Plus |
| Purity | 99.9996% (standard), 99.99996% (optional) |
| Max Flow | 100–600 mL/min |
| Max Pressure | 11 bar (160 psig) |
| Pressure Accuracy | ±0.1 bar (±5%) |
| Gas Volume in System | <50 mL |
| Water Resistivity Requirement | ≥1 MΩ·cm (recommended ≥5 MΩ·cm) |
| Power Consumption | 65–250 W |
| Noise Level | ≤46 dB(A) |
| Dimensions | 19″ rack-mount (483 × 500 × 350 mm, H×W×D) |
| Weight | 17–19 kg |
| Certifications | CE, CSA, FCC |
| Operating Environment | 15–40 °C, 0–80% RH (non-condensing) |
| Display | 128×64-pixel LCD with tactile buttons |
| Gas Outlet | 1/8″ Swagelock |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | NEB-40 / NEB-50 / NEB-91 |
| Temperature Range | −35 to +90 °C / −40 to +90 °C / −40 to +150 °C |
| Flow Rate | 1–20 L/min |
| Temperature Stability | ±0.01–±0.05 °C / ±0.05–±0.1 °C / ±0.05–±0.2 °C |
| Heating Power | 2.7 / 6 / 18 kW |
| Cooling Power (at 20 °C) | 1.2 / 7.5 / 11 kW |
| Pump Flow Range | 16–40 / 35–76 / 26–80 L/min |
| Pump Pressure | 0.3–1.7 / 0.48–3.2 / 0.5–3.0 bar |
| Brand | JULABO |
|---|---|
| Origin | Germany |
| Model | NEM / NEM-50 / NEM-92 |
| Temperature Range | −20 to +90 °C (NEM-50) / −40 to +150 °C (NEM-92) |
| Flow Rate | 9–26 L/min |
| Temperature Stability | ±0.05 to ±0.1 °C (NEM-50) / ±0.05 to ±0.2 °C (NEM-92) |
| Display | 5.7″ TFT touchscreen, 0.01 °C resolution |
| Heating Power | 6 kW (NEM-50) / 12 kW (NEM-92) |
| Cooling Power @20 °C | 7.5 kW (NEM-50) / 25 kW (NEM-92) |
| Pump Flow | 35–76 L/min (NEM-50) / 26–80 L/min (NEM-92) |
| Pump Pressure | 0.48–3.2 bar (NEM-50) / 0.5–3.0 bar (NEM-92) |
| Compressor | Single-stage water-cooled (NEM-50) / Two-stage water-cooled (NEM-92) |
| Heat Exchanger | Not equipped (NEM-50) / Equipped (NEM-92) |
| Secondary Circulation Pump | Not equipped (NEM-50) / Equipped (NEM-92) |
| Heat Transfer Fluid | Antifreeze (Thermal HL60) |
| Dimensions (W×D×H) | 53×66.5×126 cm (NEM-50) / 95×127×190 cm (NEM-92) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | Smart |
| Instrument Type | Benchtop Rotational Viscometer |
| Viscosity Range | 1–2,000,000 mPa·s |
| Temperature Range | 0–100 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Accuracy | ±0.1 °C |
| Speed Range | 0.3–100 rpm |
| Speed Steps | 18 |
| Viscosity Accuracy | ±1% of full scale |
| Repeatability | ±2% of full scale |
| Display Resolution | 0.01–1 cP |
| Compliance | ASTM D2196, ISO 2555, ISO 3219, USP <911> |
| Data Interface | USB-B |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | SC3-30F-1912D2-C |
| Compliance | EN 14470-1:2004, EN 1363-1 |
| Fire Resistance Rating | 30 min |
| Internal Volume | 802 L |
| Internal Dimensions (W×D×H) | 968 × 507 × 1635 mm |
| External Dimensions (W×D×H) | 1101 × 630 × 1951 mm |
| Shelf Capacity | 3 standard / up to 5 shelves |
| Max. Load per Shelf | 80 kg |
| Shelf Thickness | 30 mm |
| Self-Closing Mechanism Activation | 50 °C |
| Vent Closure Temperature | 70–100 °C |
| Weight | 330 kg |
| Brand | INFORS |
|---|---|
| Origin | Switzerland |
| Model | BioUniv CGQR |
| Measurement Principle | Optical Backscattering (521 nm & 940 nm dual-wavelength) |
| Installation | Non-invasive, external mounting on reactor wall or viewport |
| OD Range | Standard mode (521 nm): 0.5–50 |
| High-density mode (940 nm) | 15–300 |
| Compatibility | Single-wall and double-jacketed glass/metal bioreactors, including INFORS Multifors, Minifors, Techfors, and third-party vessels |
| Sterilization Requirement | None |
| Cleaning Requirement | None |
| Port Usage | Zero bioreactor port occupancy |
| Mounting Flexibility | Installable/removable during operation |
| Regulatory Alignment | Designed for GLP/GMP-compliant environments |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | ScienceLine B 2220+ |
| Electrode Type | Single-Reference Electrode |
| Body Material | Glass |
| Reference System | Ag/AgCl (3 mol/L KCl) |
| Temperature Range | −5 °C to +100 °C |
| pH Range | 0–14 |
| Junction Type | Double-Liquid-Junction |
| Sensing Element | Platinum |
| Connection | L 1 N Cable |
| Compliance | ASTM D1129, ISO 7888, USP <798>, GLP-ready configuration |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | MINI WHISPER HYBRID |
| Nitrogen Flow Rate | 5–12 L/min @ 1–7 bar |
| Air Flow Output | 35 L/min (dual-stream: 26 L/min @ 7 bar + 10 L/min @ 4 bar) |
| Nitrogen Purity | ≥99% |
| Dew Point | −40 °C (atmospheric) |
| Particle Filtration | ≤0.01 µm, compliant with ISO 8573-1:2010 Class 1.2.1 |
| Inlet Air Requirement | 96–192 L/min at 8.5–10 bar |
| Pressure Drop | ≤1.5 bar |
| Operating Temperature | 15–35 °C |
| Dimensions (W×H×D) | 348 × 735 × 350 mm |
| Weight | 8 kg |
| Certification | CE, IQ/OQ support available |
| Technology | Hollow-fiber membrane separation (0.3 mm ID, 40 nm selective layer) |
| Interface | 1/4" G nitrogen outlet, 1/8" G air outlet |
Show next