Measurement Instruments
Filter
Showing 151–180 of 1342 results
| Brand | Adam |
|---|---|
| Origin | UK |
| Manufacturer | Adam Equipment |
| Type | Precision Balance |
| Model | STB |
| Capacity | 3200–8200 g |
| Readability | 0.01 g |
| Repeatability | ±0.02 g |
| Linearity Error | ±0.03–0.04 g |
| Stabilization Time | 3 s |
| Calibration | Internal (i-models) or External (e-models) |
| Display | 15 mm high graphical LCD |
| Weighing Units | g, mg, ct, GN, lb, oz, ozt, dwt, mm, tl.T, tl.H, tl.S, T, custom |
| Interface | RS-232 |
| Operating Temperature | 10–30 °C |
| Power Supply | 24 V DC, 50/60 Hz, 500 mA adapter |
| Pan Size | 185 × 185 mm |
| Dimensions (W×D×H) | 224 × 374 × 95 mm |
| Net Weight | 6.4 kg (i), 6.7 kg (e) |
| Construction | ABS housing, 304 stainless steel pan |
| Compliance | GLP-compliant data logging, password protection, audit-ready timestamped printouts |
| Brand | Adamant Namiki |
|---|---|
| Origin | Japan |
| Model | NMH-01 |
| Measurement Principle | Optical Interference (Near-Infrared) |
| Measurement Method | Non-contact |
| Measured Parameter | Ra |
| Minimum Measurable Internal Diameter | 1.1 mm |
| Repeatability | σ = 0.2 µm |
| Brand | ADCON |
|---|---|
| Origin | Switzerland |
| Model | PA-1 |
| Pressure Range | 0–10 bar (absolute) |
| Overpressure Limit | 20 bar |
| Operating Temperature | −40 °C to +80 °C |
| Compensated Temperature Range | 0 °C to +50 °C |
| Accuracy (0–50 °C) | ±0.1% FS typical, ±1.5% FS max |
| Linearity | ±0.25% FS typical, ±0.5% FS max |
| Sensing Principle | Piezoresistive |
| Output Signal | 0.1–2.5 V ratiometric |
| Supply Voltage | 3.5–12 V DC |
| Thread Connection | G 1/4" (NPT & G 1/2" adapters available) |
| Housing Diameter | 22 mm |
| Length | 49 mm |
| Weight | 30 g |
| Cable | Shielded PVC2 |
| Cable Length Options | 5 m or 10 m |
| Connector | 4-pin M12 male on sensor, 4-pin M12 female + 7-pin Binder M9 male on cable |
| IP Rating | IP67 |
| Brand | ADVANCE RIKO |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Mini-PEM |
| Price Range | USD 85,000 – 170,000 |
| Brand | ADVANCE RIKO |
|---|---|
| Origin | Japan |
| Model | Mini-PEM |
| Measurement Principle | Simultaneous electrical power output & heat flux quantification for η calculation |
| Compliance | ASTM D8251 (2022), ISO 14405-1, GLP-aligned thermal-electrical co-calibration protocol |
| Price Range | USD 82,000 – 163,000 (FOB Yokohama) |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | MC003-Daisy564 |
| Pricing | Available Upon Request |
| Measuring Volume (mm) | 500 × 600 × 400 |
| Maximum Permissible Error (MPE) E0,MPE (� | m): 2.2 + L/300 |
| Probe Form Error (PFE) (� | m): 2.2 |
| Maximum Workpiece Load (kg) | 500 |
| Brand | AEP Technology |
|---|---|
| Origin | USA |
| Model | NANOMAP 500LS |
| Type | Contact-mode profilometer / surface roughness analyzer |
| Vertical Resolution | ≤0.1 nm |
| Lateral Scan Range (Tip Scan) | 10 µm × 10 µm to 500 µm × 500 µm |
| Lateral Scan Range (Stage Scan) | up to 50 mm |
| Maximum Vertical Dynamic Range | 500 µm |
| Measurement Speed | High-speed scanning from 1 nm to 10 mm profiles |
| Sample Handling | No specialized preparation required |
| Brand | AEP Technology |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | NANOMAP D |
| Price Range | USD 65,000 – 130,000 |
| Type | Non-contact + Contact Hybrid Profilometer / Surface Roughness & 3D Topography Analyzer |
| Brand | Agilent Technologies |
|---|---|
| Origin | Germany |
| Model | FRG-700 |
| Measurement Principle | Combined Pirani and Cold Cathode |
| Range | 5 × 10⁻⁹ to 1000 mbar |
| Vacuum Port | KF 25, CF 40 |
| Accuracy | ±30% |
| Response Time | <10 ms (>10⁻⁶ mbar), ≈1000 ms (at 10⁻⁸ mbar) |
| Operating Temperature | +5 to +55 °C |
| Max Bakeout Temperature | 150 °C |
| Analog Output | 0–10.5 VDC (logarithmic) |
| Electrical Connector | FCC 68, 8-pin female |
| Storage Temperature | –40 to +65 °C |
| Brand | Agilent Technologies |
|---|---|
| Origin | Imported |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Model | PCG-750 |
| Measurement Range | 5 × 10⁻⁵ to 1500 mbar |
| Brand | Agiltron |
|---|---|
| Origin | USA |
| Model | MDTD Series |
| Interface | USB & RS232 |
| Control Software | Windows GUI (PhotonWares) |
| Power Supply | 12 VDC / 1 A |
| Delay Range | up to 1200 ps |
| Repeatability | < 0.1 µm (sub-micron) |
| Insertion Loss | ≤ 1.5 dB (SM/PM, 1550 nm, connectorless) |
| Return Loss | ≥ 55 dB (SM/PM), ≥ 35 dB (MM) |
| Max Input Power | 20 mW (λ < 650 nm), higher-power versions available |
| Fiber Compatibility | SM, MM, PM |
| Drive Mechanism | Precision stepper motor with anti-backlash mechanism & proprietary optical encoder |
| Enclosure | Integrated driver electronics, compact monolithic housing |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | B117 |
| Power Output | 600 W |
| Operating Frequencies | 50 kHz / 200 kHz |
| Beam Width | 45° @ 50 kHz, 12° @ 200 kHz |
| Mounting Type | Low-Profile Through-Hull |
| Housing Material | Bronze |
| Acoustic Window Material | Polyurethane |
| Hole Diameter | 51 mm |
| Stem Length | 94 mm |
| Cable Length | 10 m |
| Weight | 0.9 kg |
| Maximum Hull Tilt Angle | 8° |
| Temperature Sensor | Optional |
| Tilt Sensor | Integrated |
| Compliance | ABYC H-27 Certified |
| XducerID® Technology | Yes |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | B17-HP |
| Temperature Accuracy | ±0.3°C |
| Temperature Resolution | 0.01°C |
| Response Time Constant | 5 s |
| Operating Temperature Range | 0–30°C |
| Supply Voltage | 6–28 VDC |
| Max Current Draw | 30 mA |
| Output Protocols | NMEA 0183 / NMEA 2000® |
| Output Sentence | YXMTW (NMEA 0183), PGN 130310 (NMEA 2000®) |
| Mounting Hole Diameter | 51 mm |
| Housing Material Options | Bronze, Stainless Steel, Plastic |
| Profile Height | 5 mm |
| Cable Length (Max) | 100 m |
| Weight | 1.3 kg |
| Brand | AirMar |
|---|---|
| Origin | USA |
| Model | B175H |
| Operating Frequency Range | 130–210 kHz |
| Output Power | 1000 W |
| Beam Width | 15°–9° (depending on tilt angle) |
| Transducer Mounting | Low-profile through-hull |
| Housing Material | Bronze |
| Temperature Sensor | Integrated, fast-response |
| Maximum Depth Detection | 3000 m |
| Transducer Tilt Options | 0°, 12°, 20° |
| Hull Compatibility | Fiberglass or wood |
| Maximum Hull Deadrise | 28° |
| Acoustic Window Material | Polyurethane |
| Cutout Diameter | 98 mm |
| Stub Length | 118 mm |
| Cable Length | 10 m |
| Weight | 2.7 kg |
| Xducer ID® Technology | Yes |
| Brand | AirMar |
|---|---|
| Origin | USA |
| Model | B175HW |
| Operating Frequency Range | 150–250 kHz |
| Beam Width | Fixed 25° |
| Transmit Power | 1000 W |
| Housing Material | Bronze |
| Mounting Type | Low-Profile Through-Hull |
| Transducer Window Material | Polyurethane |
| Hole Diameter | 98 mm |
| Stub Length | 118 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Maximum Hull Deadrise Angle | 28° |
| Compatible Hull Materials | Fiberglass, Wood |
| Weight | 2.7 kg |
| Total Bandwidth | 100 kHz |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | B175L |
| Operating Frequency Range | 40–60 kHz |
| Output Power | 1000 W |
| Beamwidth | 32°–21° (depending on tilt) |
| Transducer Housing Material | Bronze |
| Mounting Type | Low-Profile Through-Hull |
| Transducer Port Hole Diameter | 98 mm |
| Shaft Length | 118 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Weight | 2.7 kg |
| Maximum Hull Deadrise Angle | 28° |
| Acoustic Window Material | Polyurethane |
| Compatible Hull Materials | Fiberglass, Wood |
| Target Detection Depth | Up to 3000 m |
| Total Chirp Bandwidth | 35 kHz |
| Tilt Options | 0°, 12°, or 20° (standard variants include 0° and 12°) |
| Compliance | Designed for marine GLP-aligned data acquisition |
| Brand | AirMar |
|---|---|
| Origin | USA |
| Model | B175M |
| Operating Frequency Range | 85–135 kHz |
| Transmit Power | 1000 W |
| Beamwidth | 16°–11° (depending on tilt) |
| Transducer Mounting | Low-profile through-hull |
| Housing Material | Bronze |
| Acoustic Window | Polyurethane |
| Maximum Hull Angle | 24° |
| Cutout Diameter | 98 mm |
| Stub Length | 118 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Weight | 1.4 kg |
| Compatible Hull Materials | Fiberglass, Wood |
| Recommended Vessel Length | Up to 11 m |
| Chirp Bandwidth | 50 kHz |
| Tilt Options | 0°, 12°, 20° |
| Compliance | CE, FCC, RoHS |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | B175MW |
| Power Output | 1 kW |
| Operating Frequency Range | 60–100 kHz |
| Beam Width | 57°–73° (Port/Starboard), Avg. 16° (Forward/Aft) |
| Maximum Depth Rating | 400 m |
| Housing Material | Bronze |
| Mounting Type | Through-Hull with Tilted Element™ |
| Tilt Options | 0°, 12°, or 20° fixed |
| Transducer Window Material | Polyurethane |
| Hull Compatibility | Fiberglass or Wood, Max. Hull Thickness: Not Specified, Max. Vessel Length: 11 m |
| Cable Length | 9 m |
| Weight | 2.7 kg |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | B260 |
| Power Output | 1000 W |
| Operating Frequencies | 50 kHz / 200 kHz |
| Beamwidth | 14° × 23° @ 50 kHz / 3° × 5° @ 200 kHz |
| Housing Material | Bronze (optional stainless steel SS260) |
| Mounting Type | Through-hull |
| Port Diameter | 30 mm |
| Shaft Length | 121 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | ±0.2°C accuracy |
| Maximum Hull Tilt Tolerance | 20° |
| Lens Material | Polyurethane |
| Weight | 7.3 kg |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | B265LH |
| Frequency Range (Low) | 42–65 kHz, Beamwidth: 25°–16° |
| Frequency Range (High) | 130–210 kHz, Beamwidth: 10°–6° |
| Output Power | 1000 W |
| Installation Type | Through-Hull with Hydrodynamic Fairing |
| Housing Material | Bronze (transducer body), Polyurethane (fairing) |
| Mounting Hole Diameter | 33 mm |
| Shaft Length | 178 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Maximum Hull Deadrise Angle | 20° |
| Compatible Hull Materials | Fiberglass, Wood |
| Weight | 7.3 kg |
| Total Bandwidth | 103 kHz |
| Dual-Beam Chirp Architecture | Yes |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | B265LM |
| Frequency Range (Low) | 42–65 kHz, Beamwidth: 25°–16° |
| Frequency Range (Medium) | 85–135 kHz, Beamwidth: 16°–11° |
| Output Power | 1000 W |
| Installation Type | Through-Hull with Hydrodynamic Fairing |
| Housing Material | Bronze (transducer body), Polyurethane (fairing) |
| Mounting Hole Diameter | 33 mm |
| Shaft Length | 178 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Weight | 7.3 kg |
| Maximum Hull Deadrise Angle | 20° |
| Total Bandwidth | 73 kHz |
| Compatible Hull Types | Fiberglass or Wood |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | B275LHW |
| Power | 1000 W |
| Frequency Range | Low Band 42–65 kHz, High Wideband 150–250 kHz |
| Beam Width | Low Band 25°–16°, High Wideband 25° (constant) |
| Max Depth | Low Band 914 m, High Wideband 152 m |
| Housing Material | Bronze |
| Mounting Type | Through-hull with high-performance fairing |
| Transducer Window | Polyurethane |
| Hole Diameter | 30 mm |
| Shaft Length | 121 mm |
| Maximum Hull Tilt | 20° (with fairing) |
| Compatible Hull Materials | Fiberglass or wood |
| Minimum Vessel Length | 8 m |
| Weight | 7.3 kg |
| Temperature Sensor | Integrated fast-response water temperature sensor |
| Total Frequency Span | 123 kHz |
| Compliance | CE, FCC, RCM, UKCA |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | B285HW |
| Operating Frequency Range | 150–250 kHz |
| Beam Width | 25° (fixed) |
| Transmit Power | 1000 W |
| Maximum Depth Rating | 240 m |
| Transducer Housing Material | Bronze |
| Mounting Type | Through-hull with fairing |
| Hull Cutout Diameter | 51 mm |
| Stub Length | 97 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Transducer Weight | 2.5 kg |
| Maximum Hull Deadrise Angle | 24° |
| Acoustic Window Material | Polyurethane |
| Xducer ID® Technology | Yes |
| Compatible Vessel Length | Up to 9 m |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | B285M |
| Operating Frequency Range | 85–135 kHz |
| Beamwidth | 16°–11° (variable with frequency) |
| Transmit Power | 1000 W |
| Installation Type | Through-Hull with Fairing |
| Housing Material | Bronze |
| Acoustic Window | Polyurethane |
| Mounting Hole Diameter | 51 mm |
| Stub Length | 97 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Maximum Hull Deadrise Angle | 24° |
| Weight | 2.5 kg |
| Target Detection Depth | Up to 3000 m (10,000 ft) |
| Recommended Vessel Length | ≤ 9 m |
| Compliance | CE, FCC, RoHS |
| Brand | AirMar |
|---|---|
| Origin | USA |
| Model | B45 |
| Transducer Material | Bronze |
| Mounting Type | Through-Hull |
| Operating Frequencies | 50 kHz / 200 kHz |
| Beamwidth | 45° @ 50 kHz, 12° @ 200 kHz |
| Output Power | 600 W |
| Temperature Sensor Accuracy | ±0.2°C |
| Cable Length | 10 m |
| Housing Diameter (Hole Size) | 22 mm |
| Stem Length | 92 mm |
| Maximum Hull Tilt Angle | 26° |
| Acoustic Window Material | Polyurethane |
| Weight | 2.5 kg |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | B60 |
| Frequency Bands | 50 kHz / 200 kHz |
| Beam Width | 45° @ 50 kHz, 12° @ 200 kHz |
| Transmit Power | 600 W |
| Mounting Type | Flush-mount thru-hull |
| Housing Material | Bronze |
| Transducer Window | Polyurethane |
| Hole Diameter | 60 mm |
| Stub Length | 68.5 mm |
| Cable Length | 10 m |
| Integrated Tilt Compensation | Yes |
| Integrated Temperature Sensor | Yes |
| Maximum Hull Tilt Angle | 24° |
| Compatible Hull Size | Up to 8 m (25 ft) |
| Weight | 1.4 kg |
| Brand | Airmar |
|---|---|
| Origin | USA |
| Model | B744VL |
| Frequency | 50 kHz / 200 kHz |
| Beamwidth | 45° @ 50 kHz |
| Transmit Power | 600 W |
| Maximum Depth Range | 235–353 m (50 kHz), 118–206 m (200 kHz) |
| Hull Penetration Diameter | 51 mm |
| Fixed Shaft Length | 140 mm |
| Cable Length | 10 m |
| Operating Speed Range | 1–45 knots |
| Maximum Hull Tilt Angle | 24° (with optional high-performance fairing) |
| Transducer Housing Material | Bronze |
| Lens Material | Polyurethane |
| Integrated Sensors | Depth (pressure-based), Water Speed (paddlewheel), Temperature (NTC thermistor) |
| Weight | 2.5 kg |
| Compliance | CE, FCC, RCM, UL 1800 |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | B75H |
| Operating Frequency Range | 130–210 kHz |
| Output Power | 600 W |
| Beamwidth | 15°–9° (depending on frequency) |
| Transducer Mounting | Through-hull |
| Housing Material | Bronze |
| Temperature Sensor | Integrated, Fast-response |
| Maximum Detection Depth | 3,000 m |
| Cable Length | 10 m |
| Weight | 1.4 kg |
| Transducer Tilt Options | 0°, 12°, or 20° |
| Hull Compatibility | Fiberglass or wood |
| Maximum Hull Angle | 24° |
| Window Material | Polyurethane |
| Cutout Diameter | 70 mm |
| Shaft Length | 95 mm |
| Xducer ID® Technology | Yes |
| Brand | AirMar |
|---|---|
| Origin | USA |
| Model | B75M |
| Operating Frequency Range | 80–130 kHz |
| Transmit Power | 600 W |
| Beamwidth | 24°–16° (depending on tilt) |
| Transducer Housing Material | Bronze |
| Mounting Type | Low-Profile Through-Hull |
| Hole Diameter | 70 mm |
| Shaft Length | 95 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Weight | 1.4 kg |
| Maximum Hull Deadrise Angle | 24° |
| Acoustic Window Material | Polyurethane |
| Compatible Hull Materials | Fiberglass, Wood |
| Depth Measurement Range | Up to 3,000 m |
| Total Chirp Bandwidth | 50 kHz |
| Tilt Options | 0°, 12°, 20° |
| Brand | AIRMAR |
|---|---|
| Origin | USA |
| Model | B765LH |
| Transducer Type | Through-Hull Dual-Beam Chirp Sonar |
| Low-Frequency Range | 40–75 kHz (300 W, Beamwidth 32°–21°) |
| High-Frequency Range | 130–210 kHz (600 W, Beamwidth 15°–9°) |
| Total Chirp Bandwidth | 115 kHz |
| Mounting | Through-Hull with Hydrodynamic Fairing |
| Hull Material Compatibility | Fiberglass or Wood |
| Maximum Hull Deadrise | 24° |
| Transducer Housing | Bronze (Body), Polyurethane (Fairing) |
| Thru-Hull Hole Diameter | 51 mm |
| Stub Length | 121 mm |
| Cable Length | 10 m |
| Integrated Temperature Sensor | Yes |
| Weight | 2.5 kg |
| Max Operating Depth | 3000 m |