Mixing & Dispersion Equipment
Filter
Showing 1–30 of 554 results
| Brand | 2mag |
|---|---|
| Origin | Germany |
| Model | BIOMIX drive 1 |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 5 L |
| Speed Range | 2–250 rpm |
| Temperature Operating Range | Ambient (–10 to +50 °C, high-humidity compatible) |
| IP Rating | IP68 |
| Power per Position | 6 W |
| Housing Material | Stainless Steel (AISI 316L) |
| Dimensions (W × D × H) | 180 × 180 × 38 mm |
| Weight | ~2.3 kg |
| Input Voltage | 48 V DC |
| Brand | 2mag |
|---|---|
| Origin | Germany |
| Model | DRYBATH 15-100 |
| Stirring Points | 15 |
| Max. Stirring Volume per Position | 250 mL |
| Speed Range | 100–2000 rpm |
| Temperature Range | 40–200 °C |
| Heating Power | 1000 W |
| Input Voltage | 230 V AC |
| Protection Class | IP20 |
| Dimensions (W × D × H) | 280 × 430 × 120 mm |
| Weight | ~20 kg |
| Brand | 2mag |
|---|---|
| Origin | Germany |
| Model | maxMIX |
| Maximum Stirring Volume | 150 L |
| Speed Range | 100–1,200 rpm |
| Stirring Power (max) | 40 W |
| Acceleration Time | 20–99 s (adjustable soft-start) |
| IP Rating | IP64 |
| Operating Temperature | −10 to +50 °C |
| Humidity Limit | ≤80% RH |
| Electrical Supply | 100–240 V / 50–60 Hz |
| Dimensions (W × D × H) | 265 × 320 × 68 mm |
| Weight (gross) | ~10 kg |
| Housing Material | Stainless steel (AISI 304) |
| Compliance | FDA-compliant PTFE coating on stir bars, steam-sterilizable at 121 °C |
| Brand | 2mag |
|---|---|
| Origin | Germany |
| Model | MIX 1 |
| Maximum Stirring Volume | 1000 L |
| Speed Range | 0–2000 rpm |
| Temperature Control Range | 0–200 °C |
| Instrument Type | Magnetic Stirrer |
| Warranty | 3 Years (Germany-manufactured) |
| Brand | 2MAG |
|---|---|
| Origin | Germany |
| Model | MIX 1 |
| Stirring Speed Range | 100–2000 rpm |
| Max. Stirring Volume | 10 L |
| Power Settings | 4-step (25/50/75/100%) |
| Housing Material | Stainless Steel, IP64 |
| Operating Temperature | −10 to +50 °C (at 80% RH) |
| Weight | ~4 kg |
| Warranty | 3 Years |
| Brand | 2mag |
|---|---|
| Origin | Germany |
| Model | MIX 1 |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 10 L |
| Speed Range | 100–2000 rpm |
| Operating Temperature | Ambient |
| Housing Material | Stainless Steel (IP64) |
| Power Rating | 20 W |
| Power Settings | 4-step rotary control (25%/50%/75%/100%) |
| Weight | ~4 kg |
| Environmental Rating | -10 to +50 °C at ≤80% RH |
| Brand | 2mag |
|---|---|
| Origin | Germany |
| Model | MIX 15 eco |
| Stirring Positions | 15 |
| Position Spacing | 65 mm |
| Max Volume per Position | 1,500 mL |
| Speed Range | 120–1,200 rpm |
| Power per Unit | 10 W |
| Operating Temperature | −10 °C to +50 °C (80% RH) |
| Input Voltage | 100–240 V, 50–60 Hz |
| IP Rating | IP64 |
| Dimensions (W×D×H) | 245 × 425 × 38 mm |
| Weight | 8.8 kg |
| Enclosure Material | Stainless Steel |
| Display | Digital LED |
| SoftStart Function | Yes |
| Auto-Memory | Yes |
| Compliance | CE, RoHS, IEC 61010-1 |
| Brand | 2mag |
|---|---|
| Origin | Germany |
| Model | MIXdrive 1 eco |
| Instrument Type | Magnetic Stirrer |
| Max. Stirring Volume | 3 L |
| Speed Range | 100–2,000 rpm |
| Temperature Resistance | Up to +200 °C (oven), up to +95 °C (submerged in water/oil bath) |
| IP Rating | IP68 |
| Footprint | 12 × 12 cm |
| Warranty | 3 years |
| Drive Principle | Contactless Inductive Magnetic Drive |
| Enclosure Material | Fully Sealed Stainless Steel |
| Brand | 2mag |
|---|---|
| Origin | Germany |
| Model | MIXdrive |
| Stirring Volume per Position | Up to 250 L |
| Speed Range | 120–1200 rpm |
| Temperature Resistance | Up to 200 °C |
| IP Rating | IP64 |
| Drive Principle | Contactless Induction Motor (No Mechanical Wear) |
| Housing Material | Stainless Steel (AISI 304) |
| Operating Voltage | 24 V DC |
| Dimensions (W×D×H) | 260 × 260 × 68 mm |
| Weight | 9.8 kg |
| Ambient Operating Conditions | −10 to +50 °C, ≤95% RH |
| Warranty | 3 Years |
| Brand | 2mag |
|---|---|
| Origin | Germany |
| Model | STIRRING DRYBATH 15-100 |
| Max. Stirring Volume | 150 mL |
| Speed Range | 100–2000 rpm |
| Temperature Range | 40–200 °C |
| Heating Power | 1000 W |
| Stirring Positions | 15 |
| Block Dimensions (Ø/Depth) | 57.5 mm / 48 mm |
| Spacing Between Holes | 65 mm |
| Voltage | 230 V, 50–60 Hz |
| IP Rating | IP20 |
| Weight | 20 kg (main unit), 2.2 kg (heatMIXcontrol) |
| Brand | 2mag |
|---|---|
| Origin | Germany |
| Model | Stirring Hotplate 15 |
| Max. Stirring Volume per Position | 1,000 mL |
| Speed Range | 100–2,000 rpm |
| Temperature Range | +40 °C to +200 °C |
| Stirring Positions | 15 |
| Stirring Point Spacing | 65 mm |
| Stirring Power | 40 W per position |
| Power Setting | 10-step (10–100%) |
| Heating Output | 1,200 W at 230 V |
| Plate Material | Anodized Aluminum with PTFE Coating |
| Dimensions (W×D×H) | 250 × 430 × 75 mm |
| Weight | ~13.0 kg |
| IP Rating | IP20 |
| Voltage | 230 V AC |
| Brand | Applitech |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | AbioMixer |
| Price | USD 140,000 (FOB Guangdong) |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Extru25-20 |
| Instrument Type | High-Pressure Pneumatic Extruder |
| Dimensions (W×D×H) | 280 × 440 × 260 mm |
| Sample Volume Range | 0–20 mL |
| Maximum Operating Pressure | 25 MPa |
| Final Particle Size Range | 50–1000 nm |
| Maximum Product Concentration | 200 mg/mL |
| Operating Temperature Range | 5–80 °C |
| Construction Material | SS316L |
| Membrane Diameter | 25 mm |
| Power Source | Compressed Nitrogen Gas |
| Residual Volume | < 10 µL |
| Temperature Control | Integrated Jacketed Chamber with External Circulator Compatibility |
| Regulatory Compliance | All elastomeric components (O-rings, gaskets) FDA-compliant per 21 CFR §177.2600 |
| Brand | Aitesen |
|---|---|
| Model | HPEx-L1 |
| Type | Manual Liposome Extrusion Device |
| Sample Volume Range | 0.1–1.0 mL per run |
| Residual Volume | 0 mL |
| Polycarbonate (PC) Membrane Diameter | 19 mm |
| Available Membrane Pore Sizes | 50 nm, 100 nm, 200 nm, 400 nm, 800 nm |
| Temperature Compatibility | Water-bath compatible (ambient to 60 °C) |
| Weight | <2 kg |
| Cleaning | Fully disassemblable |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Model | HPH-L2 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 545 × 755 × 494 mm |
| Maximum Pressure | 2000 bar |
| Maximum Feed Particle Size | 500 µm |
| Flow Rate | 5–15 L/h |
| Minimum Sample Volume | 15 mL |
| Noise Level | 65 dB(A) |
| Power Rating | 1.5 kW |
| Material of Wetted Parts | SAF2507 Super Duplex Stainless Steel |
| Compliance | Manufactured per EU Machinery Directive 98/37/EC (MD) |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Instrument Type | High-Pressure Homogenizer |
| Structural Design | Modular Pump Head |
| Valve Material | SAF2507 Super Duplex Stainless Steel |
| Pressure Regulation | Manual & Pneumatic |
| Control Interface | Touchscreen Panel |
| Data Logging | Real-Time Pressure Monitoring & Exportable Records |
| Safety Features | Adjustable Pressure Limit with Audible/Visual Alarm |
| Optional Modules | Variable-Frequency Flow Control, Automated Pressurization, PLC Integration, Temperature Control, Multi-Stage Homogenization, Closed-Loop Circulation, Pre-Processing Unit |
| Flow Rate Range | 80–2000 L/h |
| Maximum Operating Pressure | 1500 bar (standard), 1000 bar (high-flow configurations) |
| Compliance | Designed for GMP-aligned process development and scale-up per ISO 22411, ASTM E2456, and USP <1119> guidelines |
| Brand | Aitesen |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | MPE-L1 |
| Instrument Type | High-Pressure Microfluidic Emulsification System |
| Dimensions (W×D×H) | 280 × 440 × 260 mm |
| Flow Rate Range | 0.1–200 mL/min |
| Pressure Range | 0–25 MPa |
| Temperature Control Range | 4–100 °C |
| Flow Accuracy | ≤ ±1% |
| Flow Repeatability | ≤ 1% |
| Pressure Pulsation | ≤ 0.1 MPa |
| Pressure Accuracy | ≤ 0.1 MPa |
| Minimum Channel Width | 20 µm |
| Particle Size Output | <100 nm |
| Polydispersity Index (PDI) | <0.1 |
| Brand | Aitesen |
|---|---|
| Model | OLExS-Pd |
| Instrument Type | Microfluidic Extrusion System |
| Processing Volume | 100–5000 mL |
| Dimensions (W×D×H) | 280 × 440 × 260 mm |
| Origin | Jiangsu, China |
| Supplier Type | Authorized Distributor |
| Regulatory Classification | Domestic Laboratory-Grade Equipment |
| Brand | Aitesen |
|---|---|
| Model | TBX001 |
| Instrument Type | High-Pressure Extruder |
| Dimensions (W×D×H) | 80 × 140 × 60 mm |
| Sample Volume Range | 0–10 mL |
| Maximum Operating Pressure | 1000 psi |
| Final Particle Size Range | 50–1000 nm |
| Polydispersity Index (PDI) | <0.1 achievable |
| Operating Temperature Range | 5–75 °C |
| Maximum Lipid Concentration | 200 mg/mL |
| Construction Materials | 316L stainless steel body, polycarbonate (PC) track-etched membranes, FDA-compliant PU/PTFE seals |
| Temperature Control | Jacketed with external recirculating chiller |
| Compliance | Designed for GMP-compliant cleanroom use |
| Brand | Aitesen |
|---|---|
| Model | TLEx-100 |
| Type | Nitrogen-Driven Membrane Extrusion System |
| Max. Sample Volume | 100 mL |
| Dimensions (W×D×H) | 80 × 140 × 60 mm |
| Construction Materials | SS316L Support/Filter Plates, Polycarbonate (PC) Track-Etched Membranes, FDA-Certified PU/PTFE Seals |
| Temperature Control | Jacketed Heating (up to 70 °C) |
| Pressure Source | Regulated Compressed Nitrogen |
| Sterilization Compatibility | Autoclavable Components (121 °C, 20 min) |
| Compliance | GMP-Aligned Design, Suitable for ISO Class 5–7 Cleanrooms |
| Particle Size Output | Typically <100 nm, PDI <0.1 (with appropriate membrane pore size and cycling protocol) |
| Brand | AITSEN |
|---|---|
| Model | HPH-L3 |
| Type | High-Pressure Piston-Type Homogenizer |
| Construction | Modular Pump Head Design |
| Wetted Materials | SAF2507 Super Duplex Stainless Steel |
| Maximum Operating Pressure | 1800 bar |
| Flow Rate Range | 10–40 L/h |
| Minimum Sample Volume | 30 mL |
| Dimensions (W×D×H) | 658 × 868 × 920 mm |
| Weight | 280 kg |
| Noise Level | ≤65 dB(A) |
| Power Supply | 5.5 kW |
| Compliance | Manufactured per EU Machinery Directive 98/37/EC (MD) |
| Sterilization & Cleaning | CIP-Compatible, Autoclavable Components |
| Control Interface | Touchscreen HMI with Real-Time Pressure Monitoring, Data Logging, and Export (CSV/Excel) |
| Optional Systems | Frequency-Controlled Flow Regulation, Pneumatic/Automatic Pressure Actuation, PLC-Based Process Logic Control, Jacketed Temperature Control, Multi-Stage Homogenization, Closed-Loop Recirculation, Pre-Conditioning Module |
| Brand | Allsheng |
|---|---|
| Origin | Zhejiang, China |
| Model | Bioprep-6 |
| Instrument Type | Bead Mill Homogenizer |
| Dimensions (W×D×H) | 354 × 218 × 206 mm |
| Sample Capacity | 6 × 2 mL / 1.5 mL / 0.5 mL tubes or 2 × 5 mL tubes |
| Oscillation Speed | 2500–4350 rpm (step: 10 rpm) |
| Velocity Range | 4.00–7.00 m/s (step: 0.05 m/s) |
| Time Setting | 1–90 s (step: 1 s) |
| Interval Time | 1–90 s (step: 1 s) |
| Cycles | up to 10 |
| Acceleration/Deceleration Time | <2 s |
| Noise Level | <65 dB(A) |
| Max Input Power | 150 W |
| Weight | 8.9 kg |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Display | LCD |
| Brand | analytikjena |
|---|---|
| Origin | Germany |
| Model | SpeedMill Plus |
| Instrument Type | Benchtop Homogenizer |
| Instrument Subtype | Tissue Disruption Homogenizer |
| Sample Throughput | 20 samples per run |
| Cooling Method | Pre-chilled sample holders (e.g., -80 °C) |
| Operating Principle | Vertical bead-beating with high-frequency oscillation |
| Brand | Ankersmid |
|---|---|
| Origin | Netherlands |
| Model | PD-10 |
| Instrument Type | Pneumatic Impact Dispersion System |
| Sample Handling Principle | Vacuum-Induced Turbulent Shear Dispersal |
| Compliance Context | Designed for ISO 13322-1 (particle morphology by image analysis), ASTM E2557 (dry powder dispersion for microscopy), GLP-compliant sample preparation workflows |
| Brand | APV |
|---|---|
| Origin | Germany |
| Model | APV-15MR |
| Instrument Type | High-Pressure Homogenizer |
| Max Operating Pressure | 690 bar (10,000 psi) |
| Adjustable Pressure Range | 0–690 bar (manual handwheel control) |
| Flow Rate | 57 L/h |
| Sample Inlet Particle Size Limit | ≤500 µm |
| Power Supply | 380 V / 50 Hz |
| Motor Power | 2.2 kW (3 hp) |
| Dimensions (W×D×H) | 914 × 610 × 965 mm |
| Weight | 159 kg |
| Drive Mechanism | Gear-driven (not belt-driven) |
| Brand | APV |
|---|---|
| Origin | Germany |
| Type | High-Pressure Laboratory Homogenizer |
| Model | 2000–2 |
| Max. Operating Pressure | 2000 bar |
| Adjustable Pressure Range | 0–2000 bar (manual handwheel) |
| Flow Rate | 11 L/h |
| Valve Material | Zirconia Ceramic Alloy (SEO ceramic valve) |
| Max. Inlet Particle Size | ≤500 µm |
| Operating Temperature Range | Ambient to 100 °C |
| Power Supply | 380 V / 50 Hz |
| Power Consumption | 3 kW |
| Dimensions (W×H×L) | 370 × 620 × 818 mm |
| Weight | 105 kg |
| Noise Level | 50 dB(A) |
| Brand | APV |
|---|---|
| Origin | Germany |
| Model | APV-31MR |
| Instrument Type | High-Pressure Homogenizer |
| Max Operating Pressure | 240 bar (3,500 psi) |
| Adjustable Pressure Range | 0–240 bar |
| Flow Rate | 117 L/h |
| Sample Inlet Particle Size Limit | ≤500 µm |
| Power Supply | 380 V / 50 Hz |
| Motor Power | 2.2 kW (3 hp) |
| Dimensions (W×D×H) | 914 × 610 × 965 mm |
| Weight | 159 kg |
| Drive Mechanism | Gear-Driven |
| Brand | APV |
|---|---|
| Origin | Germany |
| Model | APV-1000, APV-2000 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×H×L) | 370 × 620 × 818 mm |
| Throughput | 22 L/h (APV-2000), 11 L/h (APV-1000) |
| Valve Material | Ceramic |
| Plunger Material | Solid Ceramic |
| Pump Head Material | Duplex Stainless Steel |
| Pressure Regulation | Manual Handwheel |
| Secondary Homogenization | Optional |
| Safety Features | Overpressure Alarm, Thermal Monitoring, Emergency Stop, Current-Limiting Protection |
| Brand | APV |
|---|---|
| Origin | Germany |
| Model | APV-1000 |
| Instrument Type | High-Pressure Homogenizer |
| Maximum Operating Pressure | 1000 bar |
| Flow Rate | 22 L/h |
| Pressure Adjustment | Manual (handwheel), continuous 0–1000 bar |
| Homogenization Valve | Dual-stage SEO ceramic valve (zirconia-toughened ceramic alloy) |
| Inlet Particle Size Limit | ≤500 µm |
| Operating Temperature Range | Ambient to 100 °C |
| Power Supply | 380 V / 50 Hz |
| Power Consumption | 3 kW |
| Noise Level | 50 dB(A) |
| Dimensions (W×H×L) | 370 × 620 × 818 mm |
| Weight | 105 kg |
| Cooling & Lubrication | Integrated plunger cooling and lubrication system |
| Display | Digital pressure and temperature readout with overpressure alarm |
| Compliance | Designed for GLP-compliant R&D environments |
| Brand | APV |
|---|---|
| Origin | Germany |
| Model | APV-2000 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 370 × 620 × 818 mm |
| Processing Capacity | 11 L/h |
| Fluid End Materials | Duplex Stainless Steel Compression Head, Ceramic Plunger, Cobalt Alloy PVB Valves with Tungsten Carbide Seats |
| Control Interface | Digital Pressure & Temperature Display, Overpressure Alarm, Emergency Stop, Integrated Current-Limiting Safety Circuit |
| Housing | Polished Stainless Steel, CIP/SIP-Compatible, Modular Frame Design |