Mixing & Dispersion Equipment
Filter
Showing 541–570 of 1361 results
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 100 P4 control |
| Max. Volume (H₂O) | 100 L |
| Motor Input Power | 174 W |
| Motor Output Power | 142 W |
| Drive Type | Brushless DC Motor |
| Speed Range | 10–300 rpm |
| Speed Display | TFT |
| Speed Control | Continuous (Infinitely Variable) |
| Speed Setting Accuracy | ±1 rpm (<300 rpm) |
| Speed Measurement Deviation | ±3 rpm |
| Rotation Direction | Reversible |
| Intermittent Operation | Yes |
| Max. Viscosity | 100,000 mPa·s |
| Max. Output Power at Shaft | 100 W |
| Duty Cycle | 100 % (Continuous Operation) |
| Max. Torque | 320 N·cm |
| Rated Torque | 3.20 N·m |
| Torque Measurement Deviation | ±30 N·cm |
| Torque Display | Yes |
| Timer | Yes (TFT) |
| Timer Range | 1–6000 min |
| Temperature Range (with PT1000) | −10 to +350 °C |
| Temp. Resolution | 0.1 K |
| Temp. Accuracy (PT1000, DIN EN 60751 Class A) | ±0.5 K |
| Temp. Sensor Max. Deviation | ≤ ±(0.15 + 0.002× |
| Clamp Jaw Range | 0.5–10 mm |
| Extension Arm Diameter | 16 mm |
| Extension Arm Length | 220 mm |
| Housing Material | Cast Aluminum Coated / Thermoplastic Polymer |
| Remote Control Range (typ.) | 150 m |
| Dimensions (W×H×D) | 86 × 352 × 230 mm |
| Weight | 5.2 kg |
| Ambient Operating Temp. | 5–40 °C |
| Relative Humidity | ≤80 % (non-condensing) |
| Protection Rating | IP40 (DIN EN 60529) |
| Interfaces | RS232, USB |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Device Input Power | 150 W |
| Safety Features | Overload Protection, Stall Detection, Error Code Display, Programmable Safety Lockout |
| Included Accessories | WH 11 Wireless Controller, H 67.60 Temperature Probe |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 20 digital |
| Instrument Type | Electronic Stirrer |
| Max. Mixing Volume | 15 L (H₂O) |
| Speed Range | 0/30–2000 rpm |
| Motor Output Power | 42 W |
| Max. Torque | 20 N·cm |
| Speed Setting Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Speed Measurement Deviation | ±1% (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Viscosity | 10,000 mPa·s |
| Shaft Clamp Range | 0.5–10 mm |
| Hollow Shaft Inner Diameter | 11 mm |
| Dimensions (W×H×D) | 86 × 248 × 208 mm |
| Weight | 4.4 kg |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| Protection Class | IP42 |
| Input Voltage | 230 / 115 / 100 V, 50/60 Hz |
| Motor Type | Brushless DC Motor |
| Continuous Duty Cycle | 100 % |
| Housing Material | Cast Aluminum Coated + Thermoplastic Polymer |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Eurostar 20 Digital |
| Speed Range | 0/30–2000 rpm |
| Max. Viscosity | 10,000 mPa·s |
| Max. Volume (H₂O) | 15 L |
| Motor Output Power | 44 W |
| Stirring Shaft Output Power | 42 W |
| Max. Torque | 20 N·cm |
| Speed Setting Accuracy | ±1 rpm (n > 300 rpm), ±1% (n < 300 rpm) |
| Chuck Capacity | 0.5–10 mm |
| Hollow Shaft ID | 11 mm |
| Dimensions | 86 × 248 × 208 mm |
| Weight | 4.4 kg |
| IP Rating | IP40 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| Voltage | 100–115 / 230 V, 50/60 Hz |
| Input Power | 70 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 20 digital |
| Max. Stirring Volume (H₂O) | 15 L |
| Motor Input Power | 70 W |
| Motor Output Power | 42 W |
| Drive Type | Brushless DC Motor |
| Speed Range | 0/30–2000 rpm |
| Speed Display | LED |
| Speed Control | Electronic, Continuous |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Viscosity | 10,000 mPa·s |
| Max. Torque | 20 N·cm |
| Duty Cycle | 100 % continuous operation |
| Shaft Clamp Type | Fixed Chuck |
| Clamp Range | 0.5–10 mm |
| Hollow Shaft ID | 11 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Support Arm Diameter | 16 mm |
| Support Arm Length | 220 mm |
| Rated Torque | 0.2 N·m |
| Housing Material | Die-cast aluminum with thermoplastic polymer coating |
| Dimensions (W×H×D) | 86 × 248 × 208 mm |
| Weight | 3.9 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % (non-condensing) |
| Protection Class | IP 42 per DIN EN 60529 |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Digital Overhead Stirrer |
| Model | EUROSTAR 20 digital |
| Max. Mixing Volume (H₂O) | 25 L |
| Speed Range | 0/30–2000 rpm |
| Max. Viscosity | 10,000 mPa·s |
| Max. Torque | 40 N·cm (at 30–600 rpm), 20 N·cm (at 600–2000 rpm) |
| Torque Measurement Accuracy | ±6 N·cm |
| Speed Setting Accuracy | ±1 rpm |
| Speed Display | LCD |
| Interfaces | USB-C, RS232 |
| IP Rating | IP54 |
| Motor Type | Brushless DC |
| Continuous Duty Cycle | 100% |
| Dimensions (W×H×D) | 89 × 237 × 191 mm |
| Weight | 3.8 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Compliance | ISO Class 7/8 Cleanroom Certified, DIN EN 60529 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 20 high speed control |
| Max. Stirring Volume (H₂O) | 20 L |
| Motor Input Power | 176 W |
| Motor Output Power | 125 W |
| Drive Type | Brushless DC Motor |
| Speed Display | TFT |
| Speed Range | 0/150–6000 rpm |
| Intermittent Operation | Yes |
| Max. Viscosity | 10,000 mPa·s |
| Max. Output Torque | 20 N·cm |
| Speed Control | Continuous (Infinitely Variable) |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Torque Display | Yes |
| Rated Torque | 0.2 N·m |
| Torque Measurement Deviation | ±6 N·cm |
| Timer | Yes (TFT Display) |
| Timer Range | 1–6000 min |
| Temperature Measurement Range | –10 to +350 °C |
| Temp. Resolution | 0.1 K |
| Temp. Sensor | PT1000 (DIN EN 60751 Class A, ±0.5 K accuracy |
| Housing Material | Cast Aluminum Coating / Thermoplastic Polymer |
| Dimensions (W×H×D) | 86 × 325 × 230 mm |
| Weight | 5.242 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | 80 % RH |
| Ingress Protection | IP40 (DIN EN 60529) |
| Communication Interfaces | RS232, USB |
| Supply Voltage | 230 V AC, 50/60 Hz (optional 115 V / 100 V versions available) |
| Remote Control Range | Up to 150 m (site-dependent) |
| Standard Accessories | WH 11 Wireless Controller, H 67.60 PT1000 Temperature Probe, 280 mm Stirring Shaft (220 mm immersion depth), Extended Arm (Ø16 mm, L=220 mm) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Eurostar 20 High-Speed Controlled |
| Max. Mixing Volume | 20 L |
| Speed Range | 0/150–6000 rpm |
| Temperature Control Range | –10 °C to +350 °C |
| Motor Output Power | 125 W |
| Max. Torque | 20 N·cm |
| Torque Measurement Accuracy | ±0.6 N·cm |
| Speed Setting Accuracy | ±1 rpm (n > 300 rpm) |
| Temp. Sensor | PT1000 (DIN IEC 751 Class A, ±0.5 K) |
| Display | Multilingual TFT |
| Interfaces | RS232, USB |
| IP Rating | IP40 |
| Dimensions | 86 × 325 × 230 mm |
| Weight | 4.7 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 20 High-Speed Digital |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 86 × 325 × 208 mm |
| Maximum Processing Volume | 20 L (Water) |
| Motor Input Power | 176 W |
| Motor Output Power | 125 W |
| Speed Range | 0/150–6000 rpm |
| Speed Display | LED, 7-segment |
| Speed Control | Continuous (Stepless) |
| Speed Accuracy | ±1 rpm (n > 300 rpm) |
| Speed Deviation | ±1% (n > 300 rpm) |
| Max. Torque | 20 N·cm |
| Max. Viscosity | 10,000 mPa·s |
| Duty Cycle | 100% continuous operation |
| Shaft Type | Hollow shaft (insertion possible at standstill) |
| Clamping Diameter | 16 mm |
| Extension Arm Length | 220 mm |
| Enclosure Material | Die-cast aluminum housing with thermoplastic polymer coating |
| Weight | 5.3 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80% |
| Protection Rating | IP42 (per DIN EN 60529) |
| Power Supply | 230 / 115 / 100 V, 50/60 Hz |
| Motor Type | Brushless DC motor |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 20 high speed control |
| Maximum Stirring Volume | 20 L (H₂O) |
| Speed Range | 0/150–6000 rpm |
| Temperature Measurement Range | −10 °C to +350 °C |
| Motor Type | Brushless DC |
| Max. Torque | 20 N·cm |
| Power Input | 176 W |
| Power Output | 125 W |
| Display | Digital TFT |
| Interfaces | RS-232, USB |
| IP Rating | IP40 |
| Dimensions | 86 × 325 × 230 mm |
| Weight | 4.7 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 20 high speed digital |
| Max. Stirring Volume (H₂O) | 20 L |
| Motor Input Power | 176 W |
| Motor Output Power | 125 W |
| Drive Principle | Brushless DC Motor |
| Speed Display | LED, 7-segment |
| Speed Range | 0/150–6000 rpm |
| Max. Viscosity | 10,000 mPa·s |
| Max. Output Torque | 20 N·cm |
| Continuous Duty Cycle | 100 % |
| Speed Control | Electronic, Stepless |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Shaft Mounting | Conical Seat for Precise Alignment |
| Clamp Type | Special Output Shaft Holder with Extension Arm |
| Extension Arm Diameter | 16 mm |
| Extension Arm Length | 220 mm |
| Rated Torque | 0.2 N·m |
| Housing Material | Cast Aluminum Coated / Thermoplastic Polymer |
| Dimensions (W × H × D) | 86 × 325 × 208 mm |
| Weight | 5.3 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % (non-condensing) |
| Ingress Protection | IP 42 per DIN EN 60529 |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Acoustic Performance | Low-Noise Operation |
| Safety Features | Overload Protection, Error Code Display |
| Compliance | CE, RoHS, IEC 61000-6-3, IEC 61000-6-2 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Laboratory Equipment |
| Model | EUROSTAR 20 high speed digital |
| Instrument Type | Electric Overhead Stirrer |
| Maximum Mixing Volume | 20 L (H₂O) |
| Speed Range | 0/150–6000 rpm |
| Temperature Control | Not Integrated |
| Motor Type | Brushless DC Motor |
| Input Power | 176 W |
| Output Power | 125 W |
| Max. Torque | 20 N·cm |
| Max. Viscosity | 10,000 mPa·s |
| Speed Accuracy | ±1 rpm (n > 300 rpm) |
| Speed Measurement Deviation | ±3 rpm (n > 300 rpm) |
| Duty Cycle | 100% continuous operation |
| Protection Rating | IP40 (DIN EN 60529) |
| Dimensions (W × H × D) | 86 × 325 × 208 mm |
| Weight | 5.3 kg |
| Operating Ambient | 5–40 °C, ≤80% RH |
| Shaft Mounting | Hollow shaft with special output interface (insertion possible at standstill) |
| Clamp Compatibility | Extension arm Ø16 mm, L=220 mm |
| Housing Material | Cast aluminum with thermoplastic polymer coating |
| Safety Features | Electronic overload protection, stall detection, real-time speed deviation correction, error code display |
| Regulatory Compliance | CE-marked, compliant with IEC 61010-1 for laboratory electrical equipment |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Eurostar 20 High-Speed Digital Stirrer |
| Max. Volume (H₂O) | 20 L |
| Speed Range | 0/150–6000 rpm |
| Motor Type | Brushless DC Motor |
| Max. Torque | 20 N·cm |
| Max. Viscosity | 10,000 mPa·s |
| Input Power | 176 W |
| Output Power | 133 W |
| Speed Display | 7-segment LED |
| Speed Accuracy | ±1 rpm (n > 300 rpm), ±1% (n < 300 rpm) |
| Dimensions (W × H × D) | 86 × 325 × 208 mm |
| Weight | 5.3 kg |
| Protection Class | IP 40 |
| Ambient Temp. | 5–40 °C |
| Relative Humidity | ≤80% |
| Housing Material | Powder-coated cast aluminum / thermoplastic polymer |
| Shaft Mounting | Precision conical seat |
| Overload Protection | Integrated safety circuit with automatic shutdown |
| Continuous Duty Rating | 100% |
| Shaft Output Power | 125 W |
| Voltage | 230 V / 100–115 V |
| Frequency | 50/60 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 200 control |
| Stirrer Type | Electronic Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 100 L |
| Speed Range | 0/6–2000 rpm |
| Motor Output Power | 84 W |
| Max. Torque (Range I / II) | 200 N·cm / 40 N·cm |
| Speed Control | Continuous, Microprocessor-Regulated |
| Display | TFT Touchscreen with Multilingual UI |
| Interfaces | RS 232, USB |
| Temp. Measurement | Integrated PT1000 Input (–10 to +350 °C, ±0.5 K Class A) |
| IP Rating | IP40 |
| Dimensions | 91 × 297 × 231 mm |
| Weight | 4.9 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 200 control |
| Max. Stirring Volume (H₂O) | 100 L |
| Motor Input Power | 135 W |
| Motor Output Power | 84 W |
| Drive Type | Brushless DC Motor |
| Speed Range I (50/60 Hz) | 6–400 rpm |
| Speed Range II (50/60 Hz) | 30–2000 rpm |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1% (>300 rpm), ±3 rpm (<300 rpm) |
| Max. Viscosity | 100,000 mPa·s |
| Max. Torque I | 200 N·cm |
| Max. Torque II | 40 N·cm |
| Continuous Duty Cycle | 100% |
| Torque Display | Yes |
| Temperature Measurement Interface | PT1000 |
| Temp. Range | –10 to +350 °C |
| Temp. Accuracy | ±0.5 K (DIN EN 60751 Class A) |
| Temp. Sensor Tolerance | ≤ ±(0.15 + 0.002× |
| Stirrer Shaft Clamp Range | 0.5–10 mm |
| Hollow Shaft ID | 10.3 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 16 mm |
| Extension Arm Length | 220 mm |
| Timer Range | 1–6000 min |
| Enclosure Material | Cast Aluminum Coated / Thermoplastic Polymer |
| IP Rating | IP40 |
| Dimensions (W×H×D) | 91 × 297 × 231 mm |
| Weight | 4.9 kg |
| Ambient Operating Temp. | 5–40 °C |
| Relative Humidity Limit | 80% |
| Interfaces | RS232, USB |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Input Power | 130 W |
| Display | Multilingual TFT |
| Programmable Functions | Yes |
| Built-in Temp. Measurement | Yes |
| Intermittent Operation | Yes |
| Timer Function | Yes |
| Safety Lock Circuit | Yes |
| Stepless Speed Control | Yes |
| Overload Protection | Yes |
| Short-Term Overload Capability | Yes |
| Acoustic Noise Level | Low |
| Error Code Display | Yes |
| Standard Accessories | H 67.60 Temperature Sensor, WH 11 Wireless Controller, Support Stand |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | EUROSTAR 200 control |
| Maximum Mixing Volume | 100 L (H₂O) |
| Speed Range | 0/6–2000 rpm (dual-range, infinitely variable) |
| Motor Type | Brushless DC |
| Max Torque | 200 N·cm (Range I), 40 N·cm (Range II) |
| Power Input | 135 W |
| IP Rating | IP40 |
| Interfaces | RS232, USB |
| Display | TFT touchscreen with multilingual UI |
| Temperature Sensing | PT1000 input (–10 to +350 °C, ±0.5 K accuracy per DIN IEC 751 Class A) |
| Wireless Control | WH 11 handheld controller (up to 150 m range) |
| Dimensions (W×H×D) | 91 × 297 × 231 mm |
| Weight | 4.9 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 200 control P4 |
| Stirrer Type | Electronic Motorized Stirrer |
| Max. Mixing Volume (H₂O) | 100 L |
| Speed Range | 4–108 rpm (Range I) / 16–530 rpm (Range II) |
| Temperature Measurement Range | −10 °C to +350 °C |
| Motor | Brushless DC |
| Max. Torque | 660 N·cm |
| Power Input | 134 W |
| Display | TFT Touchscreen |
| Interfaces | RS232, USB |
| IP Rating | IP40 |
| Weight | 5.8 kg |
| Dimensions (W×H×D) | 91 × 379 × 231 mm |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 200 control P4 |
| Maximum Stirring Volume | 100 L (H₂O) |
| Speed Range | 0/4–530 rpm |
| Motor Type | Brushless DC |
| Output Power | 76 W |
| Max Torque | 660 N·cm |
| Torque Measurement | Yes |
| Temperature Measurement Range | −10 to +350 °C (PT1000 sensor) |
| Display | TFT touchscreen |
| Interfaces | RS232, USB |
| IP Rating | IP40 |
| Dimensions | 91 × 379 × 231 mm |
| Weight | 5.8 kg |
| Continuous Duty Cycle | 100% |
| Max Viscosity | 150,000 mPa·s |
| Speed Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Temp Accuracy | ±0.5 K (DIN IEC 751 Class A) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Electronic Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 100 L |
| Speed Range | 0/4–530 rpm (dual-range, microprocessor-controlled) |
| Torque Output | 660 N·cm (max), 6.6 N·m (rated) |
| Motor Type | Brushless DC Motor |
| Temp. Measurement | Integrated PT1000 sensor (–10 to +350 °C, ±0.5 K accuracy, Class A per DIN IEC 751) |
| Interfaces | RS232, USB |
| Display | TFT touchscreen with multilingual UI |
| Safety | Active torque monitoring, automatic stall protection, real-time speed deviation correction, programmable safety cutoff |
| Enclosure Rating | IP40 |
| Dimensions (W×H×D) | 91 × 379 × 231 mm |
| Weight | 5.8 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Eurostar 200 Digital / Eurostar 200 Control |
| Max. Mixing Volume (H₂O) | 100 L |
| Speed Range | 0/6–2000 rpm (two selectable ranges) |
| Max. Viscosity | 100,000 mPa·s |
| Motor Type | Brushless DC |
| Max. Torque | 200 N·cm (Range I), 40 N·cm (Range II) |
| Power Input | 130 W |
| Dimensions (Digital) | 91 × 274 × 209 mm |
| (Control) | 91 × 297 × 231 mm |
| Weight (Digital) | 4.6 kg |
| (Control) | 4.9 kg |
| IP Rating | IP40 |
| Operating Temp. | 5–40 °C |
| Relative Humidity | ≤80 % |
| Clamp Capacity | Ø 0.5–10 mm |
| Hollow Shaft ID | 10.3 mm |
| RS232 & USB Interface | Control model only |
| Temperature Measurement (Control) | PT1000, –10 to +350 °C, ±0.5 K (DIN IEC 751 Class A) |
| Timer (Control) | 1–6000 min |
| Torque Trend Monitoring (Control) | Yes |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 200 Digital |
| Max. Mixing Volume | 40 L |
| Speed Range | 50–2000 rpm |
| Torque | 60 N·cm (constant up to 1000 rpm) |
| Viscosity Range | Up to 50,000 mPa·s |
| Power Input | 130 W |
| Power Output | 110 W |
| Display | LCD |
| Control | Microprocessor-based continuous speed regulation |
| Interface | RS232 & analog output |
| IP Rating | IP42 |
| Dimensions | 80 × 253 × 190 mm |
| Weight | 3.8 kg |
| Operating Temp. | 5–40 °C |
| Humidity Limit | ≤80 % RH |
| Shaft Bore | 11 mm (hollow, insertable at standstill) |
| Chuck Range | 0.5–10 mm |
| Clamp Arm | 16 mm Ø × 200 mm extension |
| Compliance | DIN EN 60529 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 200 digital |
| Maximum Stirring Volume | 100 L (H₂O) |
| Speed Range | 0/6–2000 rpm (dual-range, microprocessor-controlled) |
| Motor Type | Brushless DC |
| Input Power | 130 W |
| Output Power | 84 W |
| Max Torque | 200 N·cm (Range I), 40 N·cm (Range II) |
| Speed Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Display | LED, 7-segment |
| Clamp Capacity | 0.5–10 mm |
| Shaft Bore | 10.3 mm (hollow, insertable at standstill) |
| Dimensions | 91 × 274 × 209 mm |
| Weight | 4.6 kg |
| IP Rating | IP42 |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤80 % |
| Voltage | 230 V / 100–115 V |
| Frequency | 50/60 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 200 digital |
| Max. Stirring Volume (H₂O) | 100 L |
| Motor Input Power | 130 W |
| Motor Output Power | 84 W |
| Drive Type | Brushless DC Motor |
| Speed Display | LED, 7-segment |
| Speed Range | 0/6–2000 rpm (2 ranges) |
| Max. Viscosity | 100,000 mPa·s |
| Max. Torque (Range I) | 200 N·cm |
| Max. Torque (Range II) | 40 N·cm |
| Speed Control | Electronic, Stepless |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1% (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Chuck Type | Plug-in collet (Ø 10 mm) |
| Chuck Jaw Range | 0.5–10 mm |
| Hollow Shaft ID | 10.3 mm |
| Hollow Shaft Insertion (at standstill) | Yes |
| Extension Arm Diameter | 16 mm |
| Extension Arm Length | 220 mm |
| Rated Torque | 2 N·m |
| Housing Material | Cast aluminum with thermoplastic polymer coating |
| Dimensions (W×H×D) | 91 × 274 × 209 mm |
| Weight | 4.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80% RH |
| Protection Class | IP 42 (DIN EN 60529) |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Continuous Operation Capability | Yes |
| Safety Features | Automatic stall detection, overload shutdown, real-time speed deviation correction, error code display |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | EUROSTAR 200 digital |
| Type | Electronic Overhead Stirrer |
| Max. Mixing Volume (H₂O) | 100 L |
| Speed Range | 0/6–2000 rpm (dual-range, microprocessor-controlled) |
| Motor | Brushless DC |
| Max. Torque | 200 N·cm (Range I), 40 N·cm (Range II) |
| Power Input | 130 W |
| Power Output | 84 W |
| Speed Display | LED, 7-segment |
| Speed Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Viscosity | 100,000 mPa·s |
| Shaft Clamping Range | 0.5–10 mm |
| Hollow Shaft Diameter | 10.3 mm |
| IP Rating | IP42 |
| Dimensions (W×H×D) | 91 × 274 × 209 mm |
| Weight | 4.6 kg |
| Operating Ambient | 5–40 °C, ≤80% RH |
| Voltage | 230 V / 100–115 V, 50/60 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 200 P4 control |
| Max. Stirring Volume (H₂O) | 100 L |
| Motor Input Power | 134 W |
| Motor Output Power | 76 W |
| Drive Type | Brushless DC Motor |
| Speed Range I (50/60 Hz) | 4–108 rpm |
| Speed Range II (50/60 Hz) | 16–530 rpm |
| Speed Control | Continuous, Electronic |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1% (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max. Torque I | 660 N·cm |
| Max. Torque II | 130 N·cm |
| Rated Torque | 6.6 N·m |
| Torque Measurement Deviation | ±60 N·cm (Range I), ±10 N·cm (Range II) |
| Max. Viscosity | 150,000 mPa·s |
| Stirrer Shaft Output Power | 76 W |
| Duty Cycle | 100% continuous operation |
| Clamp Jaw Range | 0.5–10 mm |
| Extension Arm Diameter | 16 mm |
| Extension Arm Length | 220 mm |
| Temperature Measurement | Integrated PT1000 sensor (±0.5 K, DIN EN 60751 Class A) |
| Temp. Range | –10 to +350 °C |
| Temp. Resolution | 0.1 K |
| Timer Range | 1–6000 min |
| Display | TFT, Multilingual |
| Interfaces | RS232, USB |
| IP Rating | IP40 |
| Dimensions (W×H×D) | 91 × 379 × 231 mm |
| Weight | 5.8 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Safety Features | Overload protection, Short-term overload capability, Lockable safety circuit, Error code display |
| Accessories Included | H 67.60 temperature probe, WH 11 wireless controller |
| Remote Control Range | Up to 150 m (site-dependent) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Eurostar 200 P4 Control |
| Max. Viscosity | 150,000 mPa·s |
| Max. Volume (H₂O) | 100 L |
| Speed Range | 0/4–530 rpm (two ranges: I: 4–108 rpm |
| II | 16–530 rpm) |
| Torque | 660 N·cm (Range I), 130 N·cm (Range II) |
| Motor | Brushless DC |
| Power Input | 134 W |
| Power Output | 99 W |
| Stirring Shaft Output Power | 76 W |
| Temp. Measurement | PT1000 interface, –10 to +350 °C, ±0.5 K (DIN IEC 751 Class A) |
| Display | TFT touchscreen |
| Interfaces | RS 232, USB |
| IP Rating | IP 40 |
| Dimensions | 91 × 379 × 231 mm |
| Weight | 5.8 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 2000 Basic |
| Max. Stirring Volume | 40 L |
| Speed Range | 50–2000 rpm |
| Motor Output Power | 110 W |
| Torque | 60 N·cm (constant up to 1000 rpm) |
| Viscosity Range | ≤ 50,000 mPa·s |
| Operating Temperature | 5–40 °C |
| Protection Class | IP 42 |
| Dimensions (W×H×D) | 80 × 253 × 190 mm |
| Weight | 3.8 kg |
| Shaft Bore Diameter | 11 mm (hollow shaft, insertable at standstill) |
| Clamp Range | 0.5–10 mm |
| Analog Output | Yes |
| Voltage | 230/115/100 V, 50/60 Hz |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | Eurostar 40 Digital KLC Package |
| Instrument Type | Electric Stirrer |
| Maximum Stirring Volume | 25 L (H₂O) |
| Speed Range | 0/30–2000 rpm |
| Motor Output Power | 84 W |
| Max Torque | 40 N·cm |
| Speed Accuracy | ±1 rpm (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Speed Measurement Deviation | ±1% (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Max Viscosity | 30,000 mPa·s |
| Clamp Jaw Range | 0.5–10 mm |
| Hollow Shaft Inner Diameter | 11 mm |
| Dimensions (W×H×D) | 86 × 248 × 208 mm |
| Weight | 4.4 kg |
| Operating Temperature | 5–40 °C |
| Relative Humidity Limit | 80 % |
| IP Rating | IP40 |
| Input Voltage | 230 / 115 / 100 V |
| Frequency | 50/60 Hz |
| Motor Type | Brushless DC Motor |
| Continuous Duty Cycle | 100 % |
| Enclosure Material | Cast Aluminum Coating + Thermoplastic Polymer |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Model | EUROSTAR 40 digital |
| Maximum Mixing Volume | 25 L (H₂O) |
| Speed Range | 0/30–2000 rpm |
| Torque Range | 60 N·cm (at ≤200 rpm), 40–60 N·cm (linearly adjustable from 200–2000 rpm) |
| Temperature Operating Range | 5–40 °C |
| Max. Viscosity | 30,000 mPa·s |
| Protection Rating | IP54 |
| Compliance | ISO Class 7/8 Cleanroom Certified |
| Interfaces | USB-C, RS232 |
| Motor Type | Brushless DC |
| Display | LCD with real-time torque trend |
| Safety Features | Auto-stop on stall, torque limit, sudden torque drop detection, key lock |
| Enclosure Material | Anodized aluminum housing with thermoplastic polymer coating |
| Dimensions (W×H×D) | 89 × 237 × 191 mm |
| Weight | 3.8 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | Eurostar 40 Digital |
| Speed Range | 0/30–2000 rpm |
| Max. Viscosity | 30,000 mPa·s |
| Max. Stirring Volume (H₂O) | 25 L |
| Motor Output Power | 87 W |
| Max. Torque | 40 N·cm |
| Shaft Output Power | 84 W |
| Speed Setting Accuracy | ±1 rpm (n > 300 rpm), ±1% (n < 300 rpm) |
| Speed Measurement Deviation | ±3 rpm (n > 300 rpm), ±1% (n < 300 rpm) |
| Chuck Range | 0.5–10 mm |
| Hollow Shaft ID | 11 mm |
| Housing Material | Anodized Cast Aluminum / Thermoplastic Polymer |
| Dimensions (W×H×D) | 86 × 248 × 208 mm |
| Weight | 4.4 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | 80 % |
| Protection Class | IP 40 |
| Voltage | 230 V / 100–115 V |
| Frequency | 50/60 Hz |
| Input Power | 118 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EUROSTAR 400 control |
| Max. Stirring Volume (H₂O) | 150 L |
| Motor Input Power | 220 W |
| Motor Output Power | 176 W |
| Drive Type | Brushless DC Motor |
| Speed Display | TFT |
| Speed Range | 0/6–2000 rpm |
| Intermittent Operation | Yes |
| Max. Viscosity | 100,000 mPa·s |
| Max. Output Power at Stirring Shaft | 167 W |
| Continuous Duty Cycle | 100 % |
| Max. Torque (Range I) | 400 N·cm |
| Max. Torque (Range II) | 80 N·cm |
| Speed Ranges (50/60 Hz) | I = 6–400 rpm, II = 30–2000 rpm |
| Speed Control | Infinitely Variable |
| Speed Setting Accuracy | ±1 rpm |
| Speed Measurement Deviation | ±1 % (n > 300 rpm), ±3 rpm (n < 300 rpm) |
| Clamp Type | Fixed Chuck |
| Shaft Clamp Range | Ø 3–16 mm |
| Hollow Shaft ID | 10.3 mm |
| Hollow Shaft Insertion (Stopped) | Yes |
| Extension Arm Diameter | 16 mm |
| Extension Arm Length | 160 mm |
| Torque Display | Yes |
| Rated Torque | 4 N·m |
| Torque Measurement Deviation (Range I) | ±40 N·cm |
| Torque Measurement Deviation (Range II) | ±12 N·cm |
| Timer | Yes |
| Timer Display | TFT |
| Timer Range | 1–6000 min |
| Temp. Range (with PT1000) | −10 to +350 °C |
| Temp. Resolution | 0.1 K |
| Temp. Accuracy (PT1000, DIN EN 60751 Class A) | ±0.5 K |
| Temp. Sensor Max. Deviation | ≤ ±(0.15 + 0.002× |
| Housing Material | Cast Aluminum Coating / Thermoplastic Polymer |
| Dimensions (W×H×D) | 114 × 345 × 268 mm |
| Weight | 8.8 kg |
| Ambient Operating Temp. | 5–40 °C |
| Relative Humidity | ≤80 % (non-condensing) |
| Protection Rating | IP40 (DIN EN 60529) |
| Interfaces | RS232, USB |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Instrument Input Power | 226 W |
| Included Accessories | H 67.60 Temperature Sensor, WH 11 Wireless Handheld Controller, Support Stand with Extension Arm |