Muffle Furnace
Filter
Showing 181–210 of 294 results
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GR 1300/13 |
| Quotation | Upon Request |
| Max Temperature | 1300 °C |
| Heating Length | 1300 mm |
| Heating Zones | 6 independent zones (each 160 mm) |
| Max Achievable Axial Temperature Gradient | 400 °C |
| Internal Dimensions (W×D×H) | 1300 × 100 × 60 mm |
| External Dimensions (W×D×H) | 1660 × 740 × 1345 mm |
| Power Rating | 18 kW |
| Electrical Supply | 3-phase |
| Net Weight | 300 kg |
| Heating Method | Radiant heating via resistance wire wound on ceramic support tubes |
| Loading Access | Top or front door |
| Optional Accessory | Ceramic fiber partition boards for zone isolation |
| Brand | IRM |
|---|---|
| Origin | Beijing, China |
| Manufacturer | IRM (Domestic) |
| Instrument Type | Box-Type Muffle Furnace |
| Max Operating Temperature | 1200 °C / 1500 °C / 1700 °C (model-dependent) |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 3 kW |
| Heating Time to Max Temp | ≤20 min |
| Heating Element | Kanthal A1 resistance wire (FE series) or MoSi₂ heating rods (FK series) |
| Internal Chamber Dimensions | 200 × 300 × 202 mm |
| Nominal Volume | 12 L |
| Controller | 7-inch color LCD touchscreen with intelligent PID algorithm |
| Programmable Ramp/Soak | 30 segments per program, 15 programs stored |
| Safety Protections | Over-temperature cutoff, over-current & over-voltage protection, thermocouple failure detection, earth leakage circuit breaker |
| Brand | JWINS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SX2-2.5-10N |
| Instrument Type | Box-Type Resistance Furnace |
| Maximum Temperature | 1000 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 2.5 kW |
| Heating Time to Max Temp | ≤30 min |
| Heating Element | Nickel-Chromium (NiCr) Wire |
| Internal Chamber Dimensions | 120 × 200 × 80 mm |
| Nominal Chamber Volume | 2 L |
| Operating Temperature Range | RT + 50 °C to 1000 °C |
| Supply Voltage | AC 220 V / 50 Hz |
| Chamber Lining Material | Refractory Firebrick |
| Brand | Kejing |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | PTL-HT-B |
| Instrument Type | Vertical Dual-Zone Tube Furnace |
| Max Temperature | 1200°C |
| Continuous Operating Temperature | 1100°C |
| Temperature Control Accuracy | ±1°C |
| Max Power | 1.5 kW |
| Heating Rate to Max Temp | 10°C/min |
| Heating Method | PID-Controlled Digital Temperature Controller |
| Internal Chamber Dimensions | 50 mm O.D. × 44 mm I.D. × 450 mm L |
| Dual Heating Zones | 2 × 100 mm length, total 200 mm heated length |
| Max Achievable Axial Temperature Gradient | 1°C/cm |
| Lift Mechanism | Touchscreen-Controlled DC Motor with Programmable Speed (1–500 µm/sec, ±0.05% accuracy), 450 mm total travel |
| Standard Suspension Wires | 3 × Ni-SS (up to 800°C) |
| Quartz Tube | 50 mm O.D. × 44 mm I.D. × 450 mm L |
| Enclosure | CE-certified |
| Warranty | 1 year parts & labor (excludes quartz tubes, seals, heating elements, and suspension wires) |
| Brand | LAC |
|---|---|
| Origin | Czech Republic |
| Model | PP 40/85 |
| Furnace Type | Benchtop/Industrial Box Furnace |
| Max Temperature | 850°C |
| Temperature Uniformity | ±2°C (per DIN 17052-1) |
| Heating Method | Resistive Wire (NiCr) |
| Internal Dimensions | 300 × 200 × 350 mm (W×H×D) |
| Volume | 21 L |
| Power Rating | 4 kW |
| Ramp Time to 850°C | ≤20 min |
| Insulation | Mineral Fiber (High-Density Ceramic Wool) |
| Controller | HT40AL Programmable Controller (30 programs, 15 segments each) |
| Thermocouple | K-Type |
| Safety Features | Door-Interlocked Terminal Switch, Overtemperature Cut-off |
| Construction | Low-Carbon Steel Outer Casing, AISI 304 Stainless Steel Chamber |
| Air Circulation | Horizontal Forced-Air System with Rear-Mounted Fan Assembly |
| Voltage | 230 V AC, 50/60 Hz |
| Weight | 130 kg |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LS 12/13 and LS 25/13 |
| Quotation | Upon Request |
| Max Temperature | 1300 °C |
| Internal Dimensions (W×D×H) | LS 12/13: 350 × 350 × 40 mm |
| LS 25/13 | 500 × 500 × 100 mm |
| Chamber Volume | 12 L and 25 L |
| External Dimensions (W×D×H) | LS 12/13: 600 × 800 × 985 mm |
| LS 25/13 | 750 × 985 × 1150 mm |
| Power Connection | 3-phase |
| Rated Power | 15 kW (LS 12/13), 22 kW (LS 25/13) |
| Net Weight | 130 kg (LS 12/13), 160 kg (LS 25/13) |
| Heating Zones | Dual-zone (bottom + top) |
| Thermocouple Type | Integrated S-type PtRh10%–Pt |
| Cooling | Built-in programmable axial fan + motorized lid lift (~20 mm) |
| Brand | MakeWave |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | MKG-M1UB |
| Price Range | USD 7,000–14,000 |
| Instrument Type | Tube Furnace |
| Maximum Temperature | 0–1000 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 1300 W |
| Heating Rate to Max Temp | ≤30 min |
| Heating Method | 2450 MHz Continuous Non-Pulsed Microwave |
| Internal Chamber Dimensions | 100 × 100 mm (Crucible System) |
| Microwave Cavity Volume | ~1.2 L |
| Microwave Output Power | 800 W (Adjustable, 0–100%) |
| Atmosphere Compatibility | Inert, Reducing, Oxidizing (via Optional Gas Lines) |
| Safety Leakage | <5 mW/cm² (per GB 10436 & IEC 61000-3-2) |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Part Number | 631000166 |
| Category | Muffle Furnace Accessory |
| Application | Catalytic Exhaust Afterburning |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Product Type | Imported Accessory |
| Compatible Models | L, LT, LE, LV, LVT Series |
| Part Numbers | 691601099 (LE 2), 691600510 (L3/LT3/LV3/LVT3), 691600511 (LE4/LE6/L5/LT5/LV5/LVT5), 691600512 (L9/LT9/LV9/LVT9) |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | R Series |
| Max Operating Temperature | 1200 °C or 1300 °C |
| Tube ID | 50–120 mm |
| Heating Zone Length | 250–1000 mm |
| External Dimensions (W×D×H) | up to 1300 mm × 1170 mm × 460 mm |
| Power Supply | 1-phase (1.6–2.3 kW) or 3-phase (6.5–11.5 kW) |
| Weight | 22–89 kg |
| Control System | HiProSystem (3-zone for models ≥750 mm heating length, 1300 °C), integrated S-type thermocouple, overtemperature protection per EN 60519-2 Class 2 |
| Atmosphere Options | inert gas, vacuum-compatible configurations available |
| Software Integration | Controltherm MV for process monitoring, logging, and compliance-ready data management |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Product Type | Replacement Hearth & Collection Tray Set |
| Compatible Models | L, LT, LE, LV, LVT Series Muffle Furnaces |
| Part Numbers | 691601097, 691600507, 691600508, 691600509, 691601098, 691600506, 691600874, 691600875 |
| Material | High-Purity Alumina-Based Ceramic (Al₂O₃ ≥ 92%) |
| Thermal Stability | Up to 1300 °C Continuous |
| Surface Texture | Precision-Engineered Corrugated Profile |
| Thickness | 12 mm ±0.3 mm |
| Dimensional Tolerance | ±0.5 mm per 100 mm |
| Compliance | ISO 9001 Certified Manufacturing |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Part Number | 631000141 |
| Compatibility | Designed for Nabertherm muffle furnaces with P330 controller interface |
| Function | Active exhaust ventilation system for controlled off-gas removal |
| Construction | High-temperature resistant stainless steel housing with IP54-rated fan assembly |
| Operating Temperature Range | Up to 1200 °C (chimney body) |
| Electrical Supply | 230 V AC, 50/60 Hz, 0.18 A |
| Fan Speed Control | Analog 0–10 V signal from P330 controller |
| Airflow Capacity | 120 m³/h at 150 Pa static pressure |
| Noise Level | ≤58 dB(A) at 1 m distance |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Part Number | 491041101 |
| Max Operating Temperature | 900 °C |
| Material | High-performance aluminosilicate fiber composite with reinforced stitching and ergonomic leather palm overlay |
| Compliance | EN 407:2020 (Type A1, A2, A3, A4, A5, B1, C1, E1, F1) |
| Intended Use | Manual handling of hot crucibles, trays, and furnace inserts in laboratory and industrial muffle furnace environments |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Part Number | 493000004 |
| Max Operating Temperature | 650 °C |
| Compliance | EN 407:2020 (Type A1, A2, A3, A4, A5, B1, C1, E1, F1) |
| Material | Aluminized Fiberglass with Insulating Liner |
| Length | 350 mm |
| Certification | CE Marked, EU Declaration of Conformity Available |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model Range | HFL16/16 – HFL160/17 |
| Max Temperature | 1600 °C or 1700 °C |
| Chamber Volume | 16–160 L |
| Heating Element | Molybdenum Disilicide (MoSi₂) |
| Insulation | Lightweight Refractory Brick with Rear Thermal Barrier |
| Thermocouple Type | Type B |
| Overtemperature Protection | Integrated Limit Controller |
| Exhaust Port | 30 mm Ø at Top Lid |
| Power Supply | 3-phase, 12–21 kW |
| Weight | 500–1190 kg |
| Compliance | CE, EN 61000-6-3, EN 61000-6-4, IEC 61000-4-2 |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | HT 04/16 – HT 16/18 |
| Furnace Type | Vertical Muffle Furnace |
| Max Temperature | 1600°C – 1800°C |
| Temperature Uniformity | ±1°C |
| Heating Element | Molybdenum Disilicide (MoSi₂) |
| Internal Dimensions | 150×150×150 mm to 260×300×200 mm |
| Chamber Volume | 4 L – 450 L |
| Max Power Input | 5.2 kW – 12.0 kW |
| Ramp Time to Max Temp | ≤60 min |
| Power Supply | 3-phase, 400 V |
| Thermal Insulation | High-purity Al₂O₃ fiber module construction |
| Safety | Dual-stage overtemperature protection (mechanical limiter + electronic controller), B-type thermocouple (PtRh30/PtRh6), chain-guided parallel door mechanism, helical locking system, reinforced hearth option, inert gas purge ports, optional forced-air cooling fan & automated venting |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | HTC03/14–HTC08/16 |
| Type | Benchtop Box Muffle Furnace |
| Max Temperature | 1400 °C / 1500 °C / 1600 °C |
| Chamber Dimensions (W×D×H) | 120×210×120 mm or 170×290×170 mm |
| Chamber Volume | 3 L or 8 L |
| External Dimensions (W×D×H) | 400×535×530 mm or 450×620×570 mm |
| Power Supply | 3-phase, 9.0 kW or 13.0 kW |
| Weight | 30–40 kg |
| Heating Time to Max Temp | ≤40–60 min (dependent on model & setpoint) |
| Heating Element | Silicon Carbide (SiC) rods |
| Construction | Double-walled stainless steel housing with fiber insulation |
| Compliance | EN 60519-2 Class 2 thermal overtemperature protection |
| Origin | Germany |
|---|---|
| Type | Box-Type Muffle Furnace |
| Max Operating Temperature | 1400 °C / 1500 °C / 1600 °C |
| Temperature Uniformity | ±1 °C |
| Heating Element | Silicon Carbide (SiC) Rods |
| Internal Chamber Dimensions | 170 × 290 × 170 mm |
| Max Power Input | 13.0 kW |
| Ramp Time to Max Temperature | ≤45 min |
| Construction | Dual-Wall Stainless Steel Housing with Ceramic Fiber Insulation |
| Compliance | EN 60519-2 (Thermal Protection Class 2), CE Marked |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | HTCT01/14, HTCT08/16 |
| Max Temperature | 1400 °C / 1500 °C / 1600 °C |
| Chamber Dimensions (W×D×H) | 110×120×120 mm to 170×290×170 mm |
| Chamber Volume | 1.5 L to 8.0 L |
| External Dimensions (W×D×H) | 340×300×460 mm to 450×620×570 mm |
| Power Supply | 1-phase or 3-phase |
| Rated Power | 3.5 kW to 13.0 kW |
| Weight | 18 kg to 60 kg |
| Heating Element | Silicon Carbide (SiC) rods |
| Construction | Double-walled stainless steel housing with fiber insulation |
| Door Type | Top-opening (HTCT series) or front-opening (HTC series) |
| Compliance | EN 60519-2 (thermal protection class 2), optional overtemperature limiter |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model Range | K1/10, K2/10, K4/10, K1/132, K2/132, K4/132, KC1/153, KC2/153 |
| Max Temperature | 1000 °C, 1300 °C or 1500 °C |
| Crucible Capacity | 1 L, 2 L or 4 L |
| External Dimensions (W × D × H) | 520–580 mm × 630–755 mm × 580–705 mm |
| Power Supply | 1-phase (3–5.5 kW) or 3-phase (10.5 kW) |
| Weight | 85–170 kg |
| Crucible Type | Graphite (standard), optional steel or SiC |
| Tilt Mechanism | Pneumatic spring-assisted tilting with damper |
| Casting Trough | Integrated front-mounted (except KC series) |
| Overtemperature Protection | EN 60519-2 Class 2 thermal cut-off |
| Viewing Port | Integrated observation window |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 1/12 – LT 40/12 |
| Heating Temperature Range | 1100 °C or 1200 °C |
| Chamber Volume | 1–40 L |
| Power Supply | 1-phase (230 V) or 3-phase (400 V) |
| Heating Configuration | Dual-sided ceramic heating plates (triple-sided for L 24/11 – LT 40/12) |
| Insulation | High-purity alumina-silica safety fiber |
| Construction | Double-walled stainless steel housing (brushed finish) |
| Door Options | Front-opening (L) or top-opening (LT) |
| Safety Compliance | EN 60519-2, Thermal Protection Class 2 |
| Data Logging | NTLog via USB flash drive |
| Optional Accessories | Gas purge interface, exhaust chimney with fan/catalyst, VCD process control software |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 15/14 |
| Type | Box Muffle Furnace |
| Max Temperature | 1400 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 3.2 kW |
| Heating Time to Max Temp | 70 min |
| Heating Method | Resistance Wire Heating |
| Internal Dimensions | 230 × 240 × 170 mm |
| Nominal Volume | 15 L |
| External Construction | Double-Wall Insulated Casing |
| Thermal Insulation Material | TRGS 905 Class 1 or 2 Non-Carcinogenic Ceramic Fiber |
| Door | Adjustable Air Intake |
| Rear Wall | Exhaust Vent |
| Controller | Nabertherm NTLog (USB Data Logging) |
| Safety | EN 60519-2 Compliant Overtemperature Limiter (Thermal Protection Class 2) |
| Optional | Inert/Reactive Gas Inlet Port, Exhaust Chimney with Fan or Catalyst, Manual/Automatic Gas Supply System |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 24/11 BO |
| Instrument Type | Box-type Muffle Furnace |
| Max Temperature | 1100°C |
| Temperature Control Accuracy | ±1°C |
| Max Power | 9000 W |
| Ramp Time to Max Temp | 95 min |
| Heating Method | Resistance Wire Heating |
| Internal Dimensions | 250 × 280 × 340 mm |
| Exhaust Treatment | Thermal & Catalytic Afterburning up to 850°C |
| Air Preheating | Yes (via bottom heating plate) |
| Safety Compliance | EN 60519-2 Class 2 Overtemperature Protection |
| Insulation Material | Non-carcinogenic Ceramic Fiber (TRGS 905 Class 1/2) |
| Construction | Double-walled Stainless Steel Casing with Textured Finish |
| Door Mechanism | Spring-assisted Mechanical Lock |
| Data Logging | NTLog Basic (USB flash drive) |
| Optional Software | VCD Process Control & Documentation Suite |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 5/13 |
| Instrument Type | Box-Type Muffle Furnace |
| Max Temperature | 1300 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 2.4 kW |
| Heating Time to Max Temp | 45 min |
| Heating Method | Resistance Wire (NiCr Alloy) |
| Internal Dimensions (W×D×H) | 130 × 170 × 200 mm |
| External Dimensions (W×D×H) | 549 × 450 × 580 mm |
| Weight | 42 kg |
| Electrical Supply | Single-phase, 230 V, 50/60 Hz |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 9/11 |
| Instrument Type | Box-Type Muffle Furnace |
| Max. Temperature | 1100°C |
| Temperature Uniformity | ±3°C |
| Max. Power | 3.0 kW |
| Heating Time to 1100°C | 75 min |
| Heating Method | Dual-Side Ceramic Heating Panels |
| Internal Dimensions (W×D×H) | 230 × 240 × 170 mm |
| External Dimensions (W×D×H) | 415 × 455 × 515 mm |
| Weight | 35 kg |
| Electrical Supply | Single-phase 230 V, 50/60 Hz |
| Insulation | High-Density Ceramic Fiber |
| Door Configuration | Front-Opening (L-series) |
| Air Inlet | Adjustable on Door |
| Rear Exhaust Port | Yes |
| Overtemperature Protection | Independent Limit Controller per EN 60519-2 Class 2 |
| Optional Accessories | USB Data Logger (NTLog), VCD Process Control Software, Gas Purge Interface, Catalytic Exhaust System |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 9/11/SKM |
| Type | Box-Type Muffle Furnace |
| Max Temperature | 1100 °C |
| Temperature Uniformity | ±1 °C |
| Max Power | 3.0 kW |
| Heating Time to Max Temp | 90 min |
| Heating Method | Resistance Wire (Embedded in Ceramic Chamber) |
| Internal Dimensions | 230 × 240 × 170 mm (W × D × H) |
| Chamber Volume | 9 L |
| External Dimensions | 490 × 505 × 580 mm (W × D × H) |
| Weight | 90 kg |
| Electrical Supply | 1-phase, 230 V, 50 Hz |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L 9/11/SW, L 9/12/SW, LT 9/11/SW, LT 9/12/SW |
| Type | Box-type muffle furnace with integrated thermogravimetric measurement |
| Max. temperature | 1100 °C or 1200 °C |
| Internal dimensions (W×D×H) | 230 × 240 × 170 mm |
| Chamber volume | 9 L |
| External dimensions (W×D×H) | 480 × 550 × 800 mm (L-series) or 480 × 550 × (800+290) mm (LT-series) |
| Power supply | 3.0 kW, single-phase |
| Weight | 55 kg (L), 75–90 kg (LT) |
| Heat-up time to max. temperature | 75–90 min |
| Weighing system options | EW-1500 (d = 0.01 g, max = 1500 g incl. lever), EW-3000 (d = 0.01 g, max = 3000 g), EW-6000 (d = 0.10 g, max = 6000 g) |
| Lever weight | 850 g |
| Minimum load | 0.5 g (EW-1500/EW-3000), 5.0 g (EW-6000) |
| Repeatability | ±0.01 g (EW-1500/EW-3000), ±0.10 g (EW-6000) |
| Brand | Nabertherm |
|---|---|
| Model | L3–L40 |
| Max. Temperature | 1100 °C / 1200 °C |
| Effective Chamber Volume | 3–40 L |
| Voltage | 230 V, 1/N |
| Power Rating | 1.2–6.0 kW |
| Weight | 20–95 kg |
| Construction | Dual-layer stainless steel housing |
| Insulation | Vacuum-formed ceramic fiber modules (standard) |
| Heating Elements | Embedded resistive wire in ceramic heating plates |
| Controller | Standard B170 digital PID (ramp-soak programming) |
| Air Management | Adjustable inlet on door |
| Safety | Low external surface temperature |
| Brand | Nabertherm |
|---|---|
| Origin | Germany |
| Model | L, LT 9/11/SKM |
| Max. Operating Temperature | 1100 °C |
| Internal Dimensions (W×D×H) | 230 × 240 × 170 mm |
| Chamber Volume | 9 L |
| External Dimensions (W×D×H) | 490 × 505 × 580 mm |
| Electrical Connection | 1-phase, 230 V, 50 Hz |
| Power Rating | 3.4 kW |
| Net Weight | 90 kg |
| Heating Element | Embedded Ceramic-Sheathed Resistance Wire |
| Chamber Material | Corrosion-Resistant Ceramic Fiber Liner with Smooth, Non-Shedding Surface |
| Door Options | Front-Opening (L) or Top-Opening (LT) |
| Air Inlet | Adjustable on Door |
| Exhaust Port | Rear Wall-Mounted |
| Safety | Dual Overtemperature Protection per EN 60519-2 (Class 2 Thermal Protection), Cut-off Setpoint Configurable |
| Optional Accessories | Catalytic Exhaust System, Forced-Air Exhaust Fan, Gas Inlet Fitting for Inert/Reducing Atmospheres |
| Origin | Germany |
|---|---|
| Type | Box-type Muffle Furnace |
| Max. Temperature | 1200 °C |
| Temperature Uniformity | ±1 °C |
| Heating Method | Embedded Resistance Wire in Ceramic Heating Panels |
| Internal Volume | 1–40 L |
| Power Rating | 1.2–6 kW |
| Ramp Time to Max Temp | ≤30 min |
| Construction | Double-walled Stainless Steel (V2A) Housing with Vacuum-Insulated Fiber Modules |
| Door Options | Flip-up or Lift-up Configuration |
| Safety Compliance | EN 60519-2, Thermal Protection Class 2 |
| Software Control | Compatible with Controltherm MV Process Management Suite |