Muffle Furnace
Filter
Showing 151–180 of 923 results
| Brand | Carbolite Gero |
|---|---|
| Origin | United Kingdom |
| Model | VCF 12/5/3508/P10 |
| Type | Top-Loading Box Muffle Furnace |
| Max Operating Temperature | 1200 °C |
| Temperature Uniformity | ±5 °C (at setpoint, at center of chamber) |
| Chamber Internal Dimensions | 600 × 410 × 410 mm (L × W × H) |
| Chamber Volume | ~100 L |
| Heating Method | Radiant resistance wire (quadrilateral heating configuration) |
| Max Power Rating | 15 kW |
| Ramp Time to 1100 °C (no load) | ≤150 min |
| Standard Controller | PID301 single-segment programmable controller |
| Thermocouple Type | Ceramic-sheathed Type S (Pt/Pt–10% Rh) |
| Door Operation | Vertically hinged top-opening lid with counterbalanced mechanism |
| Panel Orientation | Tilt-adjustable front control panel |
| Brand | Carbolite Gero |
|---|---|
| Origin | Germany |
| Instrument Type | Box-Type Muffle Furnace |
| Model | VMF |
| Max Temperature | 1000 °C |
| Continuous Operating Temperature (VMF 10/6) | 950 °C |
| Internal Dimensions (VMF / ASTM) | Ø50 × 100 mm (cylindrical chamber) |
| Internal Dimensions (VMF 10/6) | 100 × 210 × 260 mm (H × W × D) |
| External Dimensions (VMF / ASTM) | 330 × 410 × 300 mm (H × W × D) |
| External Dimensions (VMF 10/6) | 655 × 435 × 610 mm (H × W × D) |
| Max Power (VMF / ASTM) | 950 W |
| Max Power (VMF 10/6) | 3000 W |
| Heating Rate (20 → 900 °C) | 20–30 min typical |
| Thermocouple Type | Type N or K |
| Weight (VMF / ASTM) | 9 kg |
| Weight (VMF 10/6) | 47 kg |
| Supply Voltage | 220–240 V, 50–60 Hz, single-phase with protective earth |
| Overtemperature Protection | Integrated dual-limit safety circuit |
| Data Interface | RS232 or optional odac™ paperless chart recorder |
| Calibration Port | Yes (VMF 10/6 only) |
| Compliance | ASTM D3175-1, ISO 562:2010 |
| Brand | Carbolite-Gero |
|---|---|
| Origin | UK |
| Model | LTH 11/49 |
| Furnace Type | Box Muffle Furnace |
| Max Temperature | 1200 °C |
| Temperature Uniformity | ±5 °C (at setpoint, steady-state) |
| Heating Method | Resistance Wire (FeCrAl alloy) |
| Internal Dimensions | 400 × 350 × 350 mm (L × W × H) |
| Chamber Volume | 49 L |
| Max Power Consumption | 9 kW |
| Insulation | Multi-layer ceramic fiber with low thermal mass |
| Safety | Dual-hand operation interlock, acoustic alarm, emergency stop, automatic heating-element retraction during lid lift |
| Controller | Separate PID controller with 2 m cable (standard) |
| Brand | Carbolite-Gero |
|---|---|
| Origin | UK |
| Model | RWF |
| Instrument Type | Box-Type Muffle Furnace |
| Max Temperature | 1200 °C |
| Temperature Uniformity | ±5 °C |
| Max Power | 9100 W |
| Ramp Time to Max Temp | 15 min |
| Heating Method | Resistive Wire (Full-Radiation Design) |
| Internal Dimensions | 220 × 260 × 400 mm (L × W × H) |
| Chamber Volume Options | 5 L, 13 L, 23 L |
| Controller | PID301 Single-Stage Programmable Controller |
| Door Type | Vertically Lifting |
| Insulation | Low-Mass, Low-Thermal-Conductivity Refractory Material |
| Floor | Dust-Free, Abrasion-Resistant Hearth |
| Brand | CEM |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Instrument Type | Box-Type Furnace |
| Max Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 1950 W (Dual Magnetron) |
| Heating Method | Microwave |
| Internal Chamber Volume | 1.8 L / 5 L |
| Brand | CEM |
|---|---|
| Origin | USA |
| Model | PHOENIX Black |
| Instrument Type | Box-Type Microwave Muffle Furnace |
| Max Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power Output | 1950 W |
| Ramp Time to Max Temperature | 10 min |
| Heating Method | Microwave |
| Internal Chamber Dimensions | 24.6 × 16.7 × 10.1 cm |
| Chamber Volume | 1.8 L (standard) / 5 L (optional) |
| Airflow Capacity | 100 CFM (standard), up to 130 CFM (with optional Airwave Amplifier) |
| Crucible Cooling Time | <30 s (1200 °C → ambient) |
| Brand | CEM |
|---|---|
| Origin | USA |
| Model | PHOENIX BLACK |
| Instrument Type | Box-Type Microwave Muffle Furnace |
| Max Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power Output | 1950 W |
| Ramp-to-Max-Temp Time | 10 min |
| Heating Method | Microwave |
| Internal Cavity Dimensions | 24.6 × 16.7 × 10.1 cm |
| Cavity Volume | 1.8 L (standard) / 5 L (optional) |
| Cooling Time (1200 °C → RT) | <30 s |
| Airflow Capacity | 100 CFM (standard), up to 130 CFM (with optional Airwave booster) |
| Compliance | ASTM D5630-94, ASTM D1509-94b, USP <281>, USP <733>, NIST-traceable temperature calibration |
| Brand | CEM |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Instrument Type | Box-Type Furnace |
| Max Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 1400 W |
| Ramp Time to Max Temp | 10 min |
| Heating Method | Microwave |
| Internal Chamber Dimensions | 24.6 × 16.7 × 10.1 cm |
| Chamber Volume | 1.8 L (standard) / 5 L (optional) |
| Cooling Time (1200 °C → RT) | <30 s |
| Exhaust Flow Rate | 100 CFM (standard), up to 130 CFM (with adjustable flow amplifier) |
| Safety | NIST-traceable internal temperature calibration, infrared microwave leakage monitoring, BITS real-time component diagnostics, RS232 interface for balance/printer integration |
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Equipment Type | Box-Type Muffle Furnace |
| Model | BFC-1200-1L |
| Maximum Temperature | 1200 °C (short-term), 1000 °C (continuous) |
| Temperature Uniformity | ±1 °C |
| Rated Power | 1 kW |
| Heating Rate to Max Temp | 10 °C/min |
| Heating Method | Resistive Wire (HRE Alloy, Beijing Shougang) |
| Chamber Dimensions | 100 × 100 × 100 mm (1 L nominal volume) |
| Thermocouple Type | K-type |
| Input Voltage | AC 220 V, 50/60 Hz |
| External Dimensions | 290 × 270 × 450 mm |
| Net Weight | 14 kg |
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Model | BFD-1000-MSF |
| Max Temperature | 1000 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 1.5 kW |
| Heating Rate (to Max Temp) | 10 °C/min |
| Furnace Type | Crucible Furnace |
| Internal Dimensions | Customizable |
| Brand | CHEMn |
|---|---|
| Origin | Anhui, China |
| Model | BG-350 |
| Instrument Type | Tube Furnace |
| Max Temperature | 300 °C (short-term) |
| Operating Temperature Range | 50–280 °C |
| Temperature Control Accuracy | ±5 °C (at furnace center, ≤280 °C) |
| Max Power | 1 kW |
| Heating Method | Resistive Wire |
| Internal Dimensions | 600 × 260 × 300 mm |
| Nominal Capacity | 10–60 mL per tube |
| Rotational Speed | 0–50 rpm |
| Vacuum Limit | 30 mbar |
| Tube Quantity | 2–4 (configurable by individual tube volume) |
| Weight | 15 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Brand | CHEMn |
|---|---|
| Origin | Anhui, China |
| Model | TFD-1200-50-II-200-RZ |
| Max Temperature | 1200 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 1.5 kW |
| Heating Rate (to Max Temp) | ≤10 °C/min |
| Heating Method | Resistance Wire Heating |
| Chamber Configuration | Dual Independent Temperature Zones (ΔT ≤ 200 °C) |
| Internal Dimensions | Customizable |
| Instrument Type | Vertical Lift-Type TGA Furnace |
| Core Function | High-Temperature Atmosphere-Controlled Mass Change Monitoring |
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Model | TFG-1200-50-220 |
| Instrument Type | Vertical Tube Furnace |
| Max. Temperature | 1100 °C |
| Temperature Control Accuracy | ±1 °C |
| Max. Power | 2.0 kW |
| Heating Rate (to Max Temp) | ≤10 °C/min |
| Heating Method | Resistance Wire |
| Internal Chamber Dimensions | 660 × 320 × 580 mm |
| Tube Diameter | 30 mm |
| Sample Boat Capacity | 10 mL (customizable) |
| Heating Zone Length | 220 mm |
| Mass Flow Range (Rotameter) | 30–200 mL/min (customizable) |
| Control System | Dual-Channel Intelligent Programmable Controller with Color Touchscreen |
| Power Supply | AC 220 V, 50/60 Hz |
| Weight | 35 kg |
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TFH-1200-30-220 |
| Instrument Type | Horizontal Tube Furnace |
| Max Temperature | 1200 °C (short-term), 1100 °C (rated) |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 1.5 kW |
| Heating Rate (to max temp) | ≤10 °C/min |
| Heating Method | Resistance Wire (HRE alloy, supplied by Shougang Beijing) |
| Chamber Dimensions | Φ80 × 220 mm |
| Hot Zone Length | 220 mm |
| Uniform Temperature Zone Length | 60–80 mm |
| Tube Compatibility | Φ30 mm or Φ50 mm × 500 mm quartz/ceramic tubes |
| External Dimensions | 340 × 320 × 380 mm |
| Net Weight | 16 kg |
| Cooling | Forced-air dual-shell system |
| Surface Temp (at 1100 °C operation) | <60 °C |
| Atmosphere Options | Air, inert (N₂, Ar), reducing (H₂/N₂), vacuum (with optional pump) |
| Temperature Programming | 30-segment ramp/soak profiles |
| Brand | CHEMn |
|---|---|
| Origin | Anhui, China |
| Model | TFH-1200-50-III-200 |
| Maximum Temperature | 1200 °C (short-term) |
| Rated Operating Temperature | 1100 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Zones | 3 independent zones (each 200 mm) |
| Uniform Temperature Zone Length | 400 mm |
| Tube Dimensions | Φ50 mm (OD) × 1000 mm (L) |
| Chamber Internal Dimensions | 1350 × 420 × 520 mm |
| Max. Power Consumption | 6 kW |
| Ramp Rate to Max Temp | ≤10 °C/min |
| Heating Element | HRE resistance wire (Shougang, Beijing) |
| Insulation Material | High-purity alumina microcrystalline fiber, vacuum-formed |
| Cooling System | Dual-layer forced-air cooling |
| Surface Temperature | ≤60 °C |
| Control System | Yudian AI-3756P 7-inch color touchscreen controller with 30-segment programmable ramp-soak profiles |
| Temperature Sensor | K-type thermocouple |
| Atmosphere Compatibility | Vacuum and inert/reducing/reactive gas environments (via quartz tube + stainless steel flanges) |
| Data Interface | USB port for real-time data logging and export |
| Brand | CHINYEE |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | L-Series |
| Pricing | Available Upon Request |
| Temperature Range | 30–3000 °C |
| Construction | Dual-layer stainless steel housing |
| Insulation | Vacuum-formed ceramic fiber modules (standard) |
| Heating Element | Embedded resistance wire in ceramic heating plates |
| Controller | Standard B170 digital PID (ramp/soak programming) |
| Air Management | Adjustable front air inlet, rear exhaust port (fan-cooled or catalytic exhaust options available) |
| Safety | Low external surface temperature, silent solid-state relays |
| Compliance | Designed to meet general laboratory safety standards per EN 61000-6-3 (EMC) and EN 61000-6-4 |
| Voltage | 220 V |
|---|---|
| Power Rating | 4000 W |
| Chamber Dimensions | 300 × 200 × 120 mm |
| Maximum Operating Temperature | 1000 °C |
| Construction | Steel cabinet with electrostatic powder coating, refractory ceramic chamber, embedded resistance heating elements, mineral wool insulation |
| Door Mechanism | Counterweight-assisted lever latch system |
| Compliance | Designed for general laboratory thermal processing per ISO 15190:2020 (Laboratory safety — General requirements) and ASTM E1142 (Standard Terminology Relating to Thermal Processing) |
| Brand | Makewave |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | MKG-R11LC |
| Instrument Type | Tube Furnace |
| Max Operating Temperature | 900 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 11 kW |
| Heating Rate to Max Temp | ≤20 min |
| Heating Method | Microwave (2450 ±50 MHz) |
| Internal Chamber Diameter | 80 mm |
| Microwave Output Power | ≤8 kW (Continuously Adjustable) |
| Pressure Rating | ≤0.3 MPa |
| Microwave Leakage | ≤5 mW/cm² (Compliant with IEC 61000-3-2 & EN 55011 Class B) |
| Brand | CZGY |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DDL-1KW |
| Instrument Type | Crucible Furnace |
| Max Temperature | 300°C |
| Temperature Control Accuracy | ±3°C |
| Max Power | 1000 W |
| Heating Time to Max Temp | 60 min |
| Heating Method | Resistance Wire Heating |
| Internal Chamber Dimensions | 14 × 14 cm |
| Brand | CZGY |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Equipment Type | Crucible Furnace |
| Max Temperature | 300°C |
| Temperature Control Accuracy | ±3°C |
| Max Power | 1000 W / 1500 W |
| Heating Time to Max Temp | ≤60 min |
| Heating Method | Electromagnetic Induction |
| Internal Chamber Diameter | 150 mm |
| Voltage | 220 V AC |
| Frequency | 50 Hz |
| Control | Stepless (0–5 Adjustable Power Levels) |
| Compliance | CE-marked design principles, GLP-aligned operational documentation |
| Brand | Depths of the Earth |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Equipment Type | Tube Furnace |
| Max Temperature | 1800 °C |
| Temperature Control Accuracy | ±2 °C |
| Voltage/Current Rating | 220–240 V, 20 A |
| Ramp Rate to Max Temp | 100 °C/min |
| Heating Method | Electrical Resistance Heating |
| Internal Chamber Dimensions | 120 × 60 × 60 cm |
| Pressure Range | 0.3–4.0 GPa |
| Pressure Control Precision | ±0.03 GPa |
| Temperature Gradient | ±15 °C |
| Quench Rate | up to 300 °C/s |
| Sample Volume Capacity | 90 mm³ (at 4.0 GPa, 10 mm die), 150 mm³ (at 2.5 GPa, 13 mm die), 500 mm³ (at 1.0 GPa, 19 mm die) |
| Continuous Operation Duration | Minutes to Months |
| Cooling System | Integrated Water-Cooled Jacket |
| Thermocouple Compatibility | Type B, J, E, T, L, N, K, W5Re–W26Re, Pt–Pt10Rh, Pt–Pt13Rh |
| Safety Features | Overtemperature, overvoltage, overcurrent, and coolant flow failure interlocks |
| Brand | MAKEWAVE |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | MKX-R2HC |
| Instrument Type | Box-Type Muffle Furnace |
| Max Temperature | 1000 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 1600 W |
| Heating Method | Microwave (2450 MHz, Continuous Non-Pulsed Output) |
| Cavity Volume | 5 L |
| External Dimensions (W×H×D) | 745 × 680 × 595 mm |
| Internal Cavity | Quartz-lined 304 Stainless Steel Chamber with Multi-Layer Ceramic Fiber Insulation (Thermal Conductivity ≈ 0.226 W/m·K) |
| Atmosphere Control | Sealed Positive-Pressure System with Dual-Gas Inlet & Exhaust Port (Optional Scrubber Interface) |
| Safety Compliance | Microwave Leakage < 5 mW/cm² (IEC 61000-4-3 / GB 10436–2022 Equivalent) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Box-Type Muffle Furnace |
| Max Temperature | 1600 °C |
| Temperature Control Accuracy | ±1 °C |
| Max Power | 12 kW |
| Time to Max Temperature | 70 min |
| Heating Element | Silicon-Molybdenum (MoSi₂) Rods |
| Internal Chamber Dimensions | 200 × 300 × 200 mm |
| Nominal Volume | 12 L |
| Control System | 7-inch Color Touchscreen Controller with AI-based PID Algorithm |
| Transformer | Integrated Three-Phase Dry-Type Isolation Transformer |
| Safety Features | Dual-stage Overtemperature Protection, Door-Interlocked Power Cut-off, Power Failure Memory, Phase Loss & Thermocouple Break Detection |
| Insulation | Vacuum-Microporous Ceramic Fiber Board |
| Chamber Lining | Polycrystalline Alumina Fiber |
| Voltage | AC 380 V, 50 Hz |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | B16-36AI |
| Type | Box-Type Muffle Furnace |
| Max. Operating Temperature | 1600 °C |
| Rated Power | 15 kW |
| Internal Chamber Dimensions | 300 × 400 × 300 mm (W × H × D) |
| Nominal Volume | 36 L |
| Heating Element | Silicon-Molybdenum (MoSi₂) Rods |
| Temperature Control System | AI-Powered Digital Controller with 7-inch Color Touchscreen |
| Programmable Ramp/Soak Profiles | Multi-segment (up to 30 segments), Linear & Non-linear Fitting Algorithms |
| Thermal Insulation | Vacuum-Microporous Ceramic Fiber Board |
| Safety Features | Dual-stage Overtemperature Protection, Door-Interlocked Power Cut-off, Phase Loss & Thermocouple Break Detection, Power Segment Limitation, Blackout Memory Retention |
| Compliance | Designed for GLP-compliant thermal processing |
| Optional Accessories | Exhaust Chimney, RS485 Communication Module, Inert Gas Inlet Valve, 4G Crucible Kit, Miniature Thermal Printer |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1600 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 15 kW |
| Heating Time to Max Temp | 70 min |
| Heating Element | Silicon-Molybdenum (MoSi₂) Rods |
| Internal Chamber Dimensions | 300 × 400 × 300 mm |
| Nominal Volume | 36 L |
| Control System | 7-inch Color Touchscreen Controller with AI-based PID Algorithm |
| Safety Features | Dual-stage Overtemperature Protection, Door-Interlocked Power Cut-off, Power Failure Memory, Phase Loss & Thermocouple Break Detection |
| Insulation | Vacuum-Microporous Ceramic Fiber Board |
| Chamber Lining | Polycrystalline Alumina Fiber |
| Transformer | Three-Phase Dry-Type Isolation Transformer |
| Compliance | Designed for GLP/GMP-aligned lab environments |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | B16-5AI |
| Type | Box-Type Muffle Furnace |
| Max Temperature | 1600 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 8000 W |
| Heating Rate | 25–35 °C/min (reaches 1600 °C in ~40 min) |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Internal Chamber Dimensions | 150 × 300 × 120 mm |
| Nominal Volume | 5 L |
| Control Interface | 7-inch Color Touchscreen |
| Transformer | Integrated Three-Phase Dry-Type Isolation Transformer |
| Compliance | Designed for GLP-compliant thermal processing environments |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | B16-5P |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1600°C |
| Temperature Control Accuracy | ±1°C |
| Rated Power | 8 kW |
| Time to Max Temperature | 70 min |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Internal Chamber Dimensions | 150 × 300 × 120 mm (W × D × H) |
| Control System | Microcomputer-Based PID Controller |
| Nominal Volume | 5 L |
| Tube Diameter | Not applicable (box-type furnace) |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | B16-9AI |
| Instrument Type | Box-Type Muffle Furnace |
| Maximum Temperature | 1600 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 10 kW |
| Heating Time to Max Temp | 70 min |
| Heating Element | Silicon-Molybdenum (MoSi₂) Rods |
| Internal Chamber Dimensions | 200 × 300 × 150 mm |
| Control Interface | 7-inch Color Touchscreen Controller |
| Nominal Volume | 9 L |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Type | Box-Type Muffle Furnace |
| Model | B18-12P |
| Maximum Temperature | 1800 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 15 kW |
| Heating Time to Max Temp | 70 min |
| Heating Element | Silicon Molybdenum (MoSi₂) Rods |
| Internal Chamber Dimensions | 200 × 300 × 200 mm |
| Nominal Volume | 12 L |
| Control System | Programmable Digital Controller with Color Touchscreen Interface |
| Insulation Material | Vacuum-Microporous Ceramic Fiber Board |
| Chamber Lining | Polycrystalline Alumina Fiber |
| Transformer | Integrated Three-Phase Dry-Type Isolation Transformer |
| Safety Features | Dual-Stage Overtemperature Protection, Door-Interlocked Power Cut-off, Power Failure Memory, Phase Loss & Thermocouple Break Detection |
| Brand | DRETOP |
|---|---|
| Origin | Shanghai, China |
| Model | B18-36AI |
| Type | Box-Type Muffle Furnace |
| Max. Temperature | 1800 °C |
| Temperature Control Accuracy | ±1 °C |
| Rated Power | 30 kW |
| Heating Time to Max. Temp. | ≤60 min |
| Heating Element | Silicon-Molybdenum (MoSi₂) Rods |
| Internal Chamber Dimensions | 300 × 400 × 300 mm (W × D × H) |
| Nominal Volume | 36 L |
| Control System | AI-Based Programmable Controller with 7″ Color Touchscreen |
| Insulation Material | Vacuum-Microporous Ceramic Fiber Board |
| Heating Configuration | Triple-Wall Radiant Heating (Front, Back, Top Walls) |
| Safety Features | Dual-Stage Over-Temperature Protection, Door-Interlocked Power Cut-off, Power Segment Limitation, Power-Fail Memory Retention, Phase-Loss & Thermocouple Break Detection |
| Transformer | Integrated Three-Phase Dry-Type Isolation Transformer |