Optical Instrument Components
Filter
Showing 31–60 of 189 results
| Brand | AmpliConyx |
|---|---|
| Origin | Finland |
| Model | TGMC-PM / TGMD-PM |
| Output Power (Max) | 100 W |
| Pump Wavelength | 976 nm |
| Signal Input | PM 10/125 Fiber |
| PER (Input-Dependent) | ≥13 dB |
| Cooling | Water-Cooled |
| Dimensions (TGMC-PM) | 342 × 330 × 38 mm |
| Dimensions (TGMD-PM) | 342 × 330 × 58 mm |
| Flow Rate | 4–10 L/min |
| Brand | Andover |
|---|---|
| Origin | USA |
| Model | 193–299 nm |
| Component Category | Optical Element |
| Diameter Tolerance | +0/−0.25 mm |
| Usable Aperture | ≥9.0 mm (12.5 mm dia), ≥21.0 mm (25 mm dia), ≥45.0 mm (50 mm dia) |
| Surface Quality | 80–50 (per MIL-PRF-13830B) |
| Optical Quality | Commercial instrumentation grade |
| Out-of-Band Blocking | Avg. OD ≥4 (1×10⁻⁴ transmission) from X-ray to FIR |
| Max. Survival Temp Range | −50°C to +50°C (CW/L 214–380 nm) |
| Humidity Resistance | Per MIL-C-48497A |
| Mechanical Mounting | Anodized aluminum ring |
| Brand | Andover |
|---|---|
| Origin | USA |
| Product Type | Colored Glass Optical Filters |
| Optical Thickness | 3.0 mm ± 0.5 mm |
| Mechanical Thickness (with ring mount) | +0.8 mm |
| Outer Diameter Tolerance | +0.00 / –0.25 mm |
| Surface Quality | 80–50 per MIL-M-13508 |
| Max Operating Temperature | +100 °C |
| Flatness | λ/4 per inch |
| Parallelism | ≤30 arc seconds |
| Spectral Data | Specified as internal transmittance |
| Corner Cropping | Applied to all 165 mm square parts unless otherwise specified |
| Brand | Andover |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Optical Component |
| Model | Dichroic Filters |
| Price Range | USD 140 – 420 (per piece, depending on size and spectral specification) |
| Component Type | Optical Element |
| Size Tolerance | +0.0 mm / −0.25 mm |
| Thickness | 1.0 mm ± 0.25 mm |
| Clear Aperture | ≥95% of outer diameter |
| Substrate Material | Soda-lime glass |
| Flatness | 3–5 waves per 25 mm |
| Parallelism | ≤3 arc minutes |
| Surface Quality | 80/50 per MIL-O-13830B |
| Coating Quality | 40/20 per MIL-O-13830B |
| Environmental Durability | Compliant with MIL-C-675A (humidity & abrasion) |
| Max Operating Temperature | +100 °C |
| Mounting | Unmounted (bare substrate with thin-film coating) |
| Brand | Andover |
|---|---|
| Origin | USA |
| Filter Type | Edge Filter (High-Pass / Low-Pass) |
| Construction | Multi-layer dielectric thin-film coating on optical substrate |
| Design Principle | Quarter-wave interference stack |
| Mounting Option | Available unmounted or mounted in threaded rings (standard metric and imperial threads per Andover catalog p.60) |
| Compliance | Designed for laboratory-grade optical systems requiring high transmission, steep edge transition, and environmental stability |
| Cleaning Compatibility | Compatible with standard optical cleaning protocols (e.g., lint-free wipes, spectroscopic-grade solvents) |
| Brand | Anritsu |
|---|---|
| Origin | Japan |
| Model | SOA-W1300-G15-SL |
| Wavelength | 1300 nm |
| Operating Band | O-band (1260–1360 nm) |
| Gain | ≥15 dB |
| Polarization-Dependent Gain (PDG) | <0.5 dB |
| Noise Figure | ≤7.5 dB |
| Input/Output Connector | FC/APC or FC/PC (configurable) |
| Package Type | Butterfly 14-pin with TEC and Monitor Photodiode |
| Operating Temperature | 15–35 °C |
| Compliance | RoHS, CE, Telcordia GR-468-CORE |
| Brand | Anteryon |
|---|---|
| Origin | Netherlands |
| Product Type | Aspheric Optical Lens (Glass Molded) |
| Mounting | Unmounted |
| Design Wavelength | 355–785 nm |
| Numerical Aperture (NA) | up to 0.95 |
| Wavefront RMS Error | ≤0.06 λ (typ. 0.02–0.04 λ @ 632.8 nm) |
| Operating Temperature | −30 °C to +85 °C |
| Compliance | ISO 10110-5, MIL-PRF-13830B scratch-dig, RoHS, REACH |
| Brand | Anteryon |
|---|---|
| Origin | Netherlands |
| Type | Glass-Molded Hybrid Aspheric Optical Lens |
| Component Category | Optical Element |
| Compliance | ISO 10110-5, ISO 9001-certified manufacturing |
| Surface Irregularity | λ/25 to λ/15 RMS (633 nm), typical |
| Coating Options | AR (400–700 nm), NIR (780–1100 nm), or custom broadband anti-reflection coatings |
| Mounting | Unmounted (standard) |
| Material Substrate | BK7, SF10, or fused silica (model-dependent) |
| Brand | AOE Tech |
|---|---|
| Origin | Shanghai, China |
| Component Type | Polarization-Maintaining Fiber Collimator |
| Wavelength | 1310 nm |
| Fiber Type | PM Panda Fiber |
| Slow-Axis Alignment | Yes |
| AR-Coated Lens | Yes |
| Connector Option | Optional (affects IL, RL, ER) |
| Operating Power Handling | High-Power Compatible |
| Compliance | ISO 10110-7 (optical surface quality), Telcordia GR-1209-CORE (fiber optic reliability) |
| Brand | AOE Tech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | PMF Fusion Tapering System |
| Price | USD 14,000 (FOB Shanghai) |
| Component Class | Optical Components |
| Brand | AOE Tech |
|---|---|
| Model | PMFC |
| Type | Polarization-Maintaining (PM) Filter-Based Coupler |
| Configuration | 1×2 / 2×2 |
| Operating Wavelengths | 1310 nm, 1550 nm, 980 nm, 1064 nm |
| Coupling Ratios | 1:99 to 50:50 (customizable) |
| Excess Loss | ≤0.7 dB (1×2, 1310/1550 nm) |
| Polarization Extinction Ratio (PER) | ≥20 dB (Type B), ≥22 dB (Type F) |
| Return Loss | ≥50 dB |
| Max Input Power | 300 mW |
| Fiber Type | Panda PM fiber (Ports 1 & 3) |
| Package Diameter × Length | φ5.5 mm × 35 mm |
| Operating Temperature | −5 °C to +70 °C |
| Storage Temperature | −40 °C to +80 °C |
| Connector Options | FC/APC, FC/UPC, SC/APC, SC/UPC |
| Slow-Axis Alignment | Key-aligned to connector key |
| Test Documentation | Full four-port IL, PER, and CR characterization per unit |
| Brand | AOE Tech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Optical Component |
| Model | PMFOA |
| Wavelength Options | 980 nm, 1064 nm, 1310 nm, 1550 nm |
| Insertion Loss (Typ.) | ≤0.6 dB (P-grade), ≤0.8 dB (A-grade) |
| Extinction Ratio | ≥20 dB (P-grade), ≥17 dB (A-grade) |
| Directivity | ≥55 dB |
| Operating Temperature | −40 °C to +85 °C |
| Storage Temperature | −40 °C to +85 °C |
| IL Tolerance (e.g., at 10 dB attenuation) | ±1.0 dB (P-grade), ±1.2 dB (A-grade) |
| Fiber Type | Panda-type PM fiber |
| Pigtail | 250 µm bare fiber or 900 µm loose tube (custom lengths available) |
| Connector Options | FC/PC, FC/APC, SC/PC, SC/APC, LC/UPC (optional) |
| Package Dimensions | Φ3 × 54 mm or Φ3 × 70 mm |
| Brand | AOE Tech |
|---|---|
| Model | PMFWDM |
| Type | Polarization-Maintaining Optical WDM Component |
| Operating Wavelength Pairs | 980/1064 nm, 1030/1064 nm, 980/1550 nm, 1550/1064 nm, 1480/1550 nm |
| Insertion Loss (Transmit Port) | ≤0.8 dB |
| Insertion Loss (Reflect Port) | ≤0.6 dB |
| Isolation (Transmit Port) | ≥25 dB |
| Isolation (Reflect Port) | ≥13 dB |
| Extinction Ratio | ≥20 dB |
| Polarization-Dependent Loss (PDL) | ≤0.3 dB |
| Return Loss | ≥50 dB |
| Thermal Stability of IL | ≤0.005 dB/°C |
| Max CW Power Handling | ≤300 mW |
| Fiber Types | Panda PM980, PM1550, HI1060, SMF-28e |
| Operating Temperature | 0–65 °C |
| Storage Temperature | −40–85 °C |
| Package Dimensions | Ø5.5 × 35 mm |
| Connector Key Alignment | Slow Axis |
| Brand | AOE Tech |
|---|---|
| Origin | Shanghai, China |
| Model | PMIS-1310nm_1480nm_1550nm |
| Operating Wavelengths | 1310 nm, 1480 nm, 1550 nm |
| Isolation Grade | Dual-Stage (PA) |
| Peak Isolation | ≥55 dB |
| Typical Insertion Loss | ≤0.6 dB (23 °C) |
| Extinction Ratio | ≥22 dB (Fast-Axis Blocked) |
| Return Loss (Input/Output) | ≥55 dB |
| Max. Optical Power Handling | 300 mW |
| Fiber Type | Panda PM Fiber |
| Operating Temperature | –5 °C to +70 °C |
| Package Dimensions | Ø5.5 mm × 35 mm |
| Compliance | Telcordia GR-1221-CORE, IEC 61300-2-4 (Insertion Loss), IEC 61300-2-17 (Return Loss) |
| Brand | AOE Tech |
|---|---|
| Origin | Shanghai, China |
| Model | PMJP |
| Component Category | Optical Component |
| Connector Types | FC/UPC, SC/UPC, LC/UPC, FC/APC, SC/APC, LC/APC |
| Center Wavelengths | 980 nm, 1064 nm, 1310 nm, 1480 nm, 1550 nm |
| Insertion Loss | ≤0.3 dB (typ.), ≤0.5 dB (max.) |
| Return Loss | ≥50 dB (UPC), ≥60 dB (APC) |
| Extinction Ratio | ≥23 dB |
| Fiber Types | PM850, PM980, PM1310, PM1550 |
| Slow-Axis Alignment Accuracy | ±3° |
| Operating Temperature | –5 °C to +70 °C |
| Storage Temperature | –40 °C to +80 °C |
| Jacket Options | 250 µm bare fiber, 900 µm loose tube, 2 mm / 3 mm tight-buffered cable |
| Length Options | 1 m, 2 m, or custom |
| Brand | AOE Tech |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Optical Component |
| Model | PMOCIR |
| Wavelength Options | 1310 nm or 1550 nm |
| Insertion Loss (Typ., λc, 23°C) | 0.6–0.7 dB |
| Insertion Loss (Max.) | 0.8–0.9 dB |
| Peak Isolation (Typ.) | 40–52 dB |
| Isolation (λc, 23°C, Typ.) | 30–46 dB |
| Isolation (Min.) | 20–40 dB |
| Extinction Ratio (Min.) | 20 dB |
| Crosstalk (Min.) | 50 dB |
| Return Loss (Min.) | 50 dB |
| Max. CW Optical Power | 300 mW |
| Tensile Load (Max.) | 5 N |
| Operating Temperature | –5 to +70 °C |
| Storage Temperature | –40 to +85 °C |
| Port Count | 3 |
| Package | Φ5.5 × L35 mm cylindrical housing |
| Fiber Options | Panda-type PM fiber (E), 250 µm bare (S), or 900 µm loose tube (M) |
| Connector Options | FC/APC, SC/APC, FC/UPC, SC/UPC |
| Pigtail Length Options | 0.5 m, 0.75 m, 1.0 m |
| Key | Brand: AOE Tech |
|---|---|
| Origin | Shanghai, China |
| Model | PMOSW |
| Component Category | Optical Component |
| Wavelength Options | 1064 nm / 1310 nm / 1550 nm |
| Insertion Loss | ≤0.5 dB (Typ. 0.4 dB) |
| Extinction Ratio | ≥20 dB |
| Channel Crosstalk | ≥55 dB |
| Return Loss | ≥55 dB |
| Repeatability | ≤±0.05 dB |
| Switching Time | 10 ms |
| Lifetime | >1,000,000 cycles |
| Operating Voltage | 5 ±0.5 V DC or 5 V pulse |
| Operating Current | <50 mA |
| Fiber Type | PM Panda fiber |
| Package Dimensions | 26.5 × 13.4 × 11 mm (L×W×H) |
| Operating Temperature | −15 °C to +70 °C |
| Storage Temperature | −40 °C to +85 °C |
| Switching Mode | Latching or Non-latching |
| [Brand | AOE Tech |
|---|---|
| Origin | Shanghai, China |
| Model | PMVOA |
| Component Category | Passive Optical Component |
| Wavelength Options | 1310 nm, 1550 nm, 1310/1550 nm, 1064 nm |
| Operating Wavelength Bandwidth | ±20 nm (for dual-band) or ±40 nm (for single-band) |
| Attenuation Range | 0.6–40 dB (1310 nm), 0.8–40 dB (1550 nm) |
| Insertion Loss (Original) | ≤0.6 dB (1310 nm), ≤0.8 dB (1550 nm) |
| Extinction Ratio | ≥20 dB |
| Return Loss | ≥50 dB |
| Fiber Type | Panda-type PM fiber |
| Adjustment Resolution | 0.02 dB |
| Operating Temperature | –5 °C to +70 °C |
| Storage Temperature | –40 °C to +85 °C |
| Package Dimensions (L×W×H) | 26 × 18 × 8 mm |
| Connector Options | FC/PC, FC/APC, SC/PC, SC/APC, or bare fiber (900 µm, 2 mm, 3 mm loose tube) |
| Fiber Length Options | 0.8 m standard, custom lengths available] |
| Brand | AOE Tech |
|---|---|
| Origin | Shanghai, China |
| Model | Single/Dual-Taper Fiber Tapering System |
| Component Category | Optical Components |
| Manufacturer Type | Authorized Distributor |
| Regional Classification | Domestic (PRC) |
| Key Features | 3-Axis Programmable Torch Positioning (X/Y/Z), Integrated Fusion & Tension Control, Dual-Mode Tapering Capability (Single- and Dual-Taper Configurations) |
| Brand | AOE Tech |
|---|---|
| Origin | Shanghai, China |
| Model | SMMM |
| Component Category | Optical Fiber Transition Device |
| Operating Wavelength Range | Full-band (C+L band compatible) |
| Maximum Insertion Loss | 0.5 dB (Premium Grade) |
| Maximum Operating Power | 5 W |
| Splicing Method | Automated Fusion Splicing with Centralized Cladding Alignment |
| Splice Type | Permanent |
| Typical Application | Mode-field adaptation in hybrid fiber networks |
| Brand | AOE Tech |
|---|---|
| Model | WDM-1550/1625 |
| Operating Wavelength | 1550 ± 5 nm / 1625 ± 5 nm |
| Insertion Loss (Max.) | 0.4 dB |
| Polarization-Dependent Loss (Max.) | 0.15 dB |
| Channel Isolation (Min.) | 13 dB |
| Return Loss (Typ.) | >55 dB |
| Operating Power (Max.) | 5 W |
| Operating Temperature | –40 °C to +85 °C |
| Storage Temperature | –50 °C to +85 °C |
| Package Options | S9 (Ø3×76 mm, bare fiber), S10 (Ø3×92 mm, 0.9 mm loose tube), M3 (7.5×18×100 mm, supports 0.9 mm tube / 2 mm or 3 mm cable) |
| Fiber Type | SMF-28e or custom single-mode pigtail |
| Connector Options | FC/PC, FC/APC, SC/PC, SC/APC, ST, LC, MU, FC/UPC, SC/UPC |
| Brand | Arcoptix |
|---|---|
| Origin | Switzerland |
| Model | ARClight NIR, ARClight IR |
| Spectral Range (NIR) | 400–4,000 nm |
| Spectral Range (IR) | 1–25 µm |
| Wavenumber Range (NIR) | 25,000–2,500 cm⁻¹ |
| Wavenumber Range (IR) | 10,000–400 cm⁻¹ |
| Filament Temperature (NIR) | ~2,850 K |
| Filament Temperature (IR) | ~1,400 K |
| Rated Lifetime (NIR) | 4,000 h |
| Rated Lifetime (IR) | 10,000 h |
| Lamp Power Options (NIR) | 5 W or 20 W |
| Lamp Power (IR) | 20 W |
| Lamp Type (NIR) | Quartz Tungsten Halogen (QTH) |
| Lamp Type (IR) | Silicon Carbide (SiC) Globar |
| Fiber Coupling Options | SMA-905 (NA = 0.25, BK7 lens) / SMA-905 (NA = 0.3, Off-axis parabolic mirror) |
| Collimated Beam Diameter | 12.7 mm |
| Operating Temperature | 5–40 °C |
| Attenuation | Manual iris diaphragm |
| Cooling | Integrated air fan |
| Input Power | 100–240 V AC to 12 V DC (included converter) |
| Dimensions (NIR, w/o coupler) | 92 × 92 × 43 mm |
| Dimensions (IR, w/ coupler) | 140 × 92 × 43 mm |
| Weight | 390 g |
| Brand | Armadillo SIA |
|---|---|
| Type | UV-Transmitting Silica Fiber |
| Wavelength Range | 190–1200 nm |
| Numerical Aperture (NA) | 0.22 ± 0.02 (standard), 0.26/0.28 ± 0.02 (UV-NSS) |
| Core Diameter | 300 µm |
| Cladding Diameter | 330 µm |
| Core/Cladding Material | Synthetic Fused Silica (UV-grade) |
| Buffer Type | Hard Polymer (H) or Nylon Jacket (N) |
| Jacket Color | Black (B) |
| Solarization Resistance | Enhanced (UV-NSS variant) |
| Compliance | ISO 10110-3, IEC 60793-2-40, ASTM F2754 (UV transmission stability) |
| Brand | Armadillo SIA |
|---|---|
| Type | High Numerical Aperture (NA) Multimode Fiber |
| Core Diameter | 25–3000 µm (configurable) |
| NA Range | 0.22 ± 0.02 to 0.87 ± 0.02 |
| Wavelength Range | 350–2400 nm (material-dependent) |
| Cladding Materials | Hard Polymer (HC), Silicone (UV), Germanium-doped Silica, Borosilicate Glass |
| Jacket Options | Black hard polymer buffer (H), Nylon overjacket (N) |
| Compliance | ISO 10993-5 biocompatibility tested |
| Customization | Available for core/clad geometry, length, termination, and connectorization |
| Brand | Armadillo SIA |
|---|---|
| Type | Silver Halide (AgCl/AgBr) Polycrystalline Fiber |
| Wavelength Range | 3–17 µm |
| Numerical Aperture | 0.13 ± 0.02 (MIR3), 0.25 ± 0.02 (MIR300/330), 0.35 ± 0.02 (custom variants) |
| Core Diameter | 20–3000 µm |
| Cladding Material | Polymeric (Hard Polymer Buffer for MIR300/330-H |
| Core/Cladding Ratio | Standardized per model (e.g., 300/330 µm) |
| Operating Temperature | Up to 80 °C (continuous), short-term up to 120 °C |
| Bend Radius | ≥15× outer diameter (static), ≥30× (dynamic) |
| Attenuation | <0.2 dB/m @ 10.6 µm (typ.), <0.5 dB/m across 4–12 µm band |
| Brand | Armadillo SIA |
|---|---|
| Core Configuration | Customizable Multicore |
| Wavelength Range | UV190–1200 nm (UV grade) / NIR700–2400 nm (broadband) |
| Numerical Aperture (NA) | 0.1–0.28 ±0.02 |
| Cladding Diameter | 100–2100 µm |
| Compliance | ISO 10110-3, IEC 60793-2-10, Telcordia GR-20-CORE |
| Customization | Core count, pitch, geometry, coating, termination, and connectorization available |
| Brand | ART Photonics |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Product Category | Imported Optical Component |
| Model | ART Fiber Series |
| Component Type | Optical Fiber Assembly |
| Core Shape | Round (custom shapes available) |
| Core Diameters | 100 µm, 200 µm, 300 µm, 400 µm, 600 µm, 800 µm |
| Core Material Options | High-OH Silica (0.18–1.2 µm), Low-OH Silica (0.35–2.5 µm) |
| Cladding | Fluorine-Doped Fused Silica |
| Numerical Aperture (Standard) | 0.22 ± 0.02 (Full Acceptance Angle: 25°) |
| Optional NA | 0.12 ± 0.02 (14°), 0.26 ± 0.02 (30°) |
| Protective Jacket Materials | Nylon, Tefzel®, Acrylate, Polyimide, Metal |
| Cable Tube | Polymer-Coated Stainless Steel |
| Length Range | 5 cm to 50 m |
| Connector Types | HP-SMA, D80 |
| Power Handling (HP-SMA) | 100 W (100 µm), 200 W (200 µm), 300 W (400 µm), 400 W (600 µm) |
| Power Handling (D80) | 150 W (100 µm), 400 W (200 µm), 600 W (400 µm), 800 W (600 µm) |
| Brand | ART Photonics |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model Series | CIR-8, CIR-250, CIR-340, CIR-500 |
| Component Category | Optical Element |
| Core Material | As₂S₃ |
| Cladding Material | As–S |
| Wavelength Range | 1.5–6 µm |
| Core Diameter | 8–500 µm |
| Cladding Diameter | 200–550 µm |
| Coating Diameter | 300–700 µm |
| Primary Coating | PTFE |
| Secondary Coating | PVC |
| Core Refractive Index | 2.4 |
| Numerical Aperture | 0.25–0.28 |
| Max CW Power Handling | 1 W |
| Fiber Structure | Step-Index, Dual-Layer Polymer-Coated |
| Termination | SMA Connector |
| Jacket | PEEK Polymer Sheath |
| Brand | art photonics |
|---|---|
| Origin | Germany |
| Fiber Type | Step-Index Multimode Chalcogenide (CIR) |
| Wavelength Range | 1.1–6.5 µm |
| Core Diameter | 500 ± 10 µm |
| Cladding Diameter | 550 ± 15 µm |
| Numerical Aperture (NA) | 0.30 ± 0.03 |
| Coating OD | 700 ± 30 µm |
| Jacket | Dual-Polymer (PVC outer), Metal Armor Sleeve (OD 3.7 mm) |
| Length | 1.00 ± 0.05 m |
| Minimum Bend Radius | 100 mm |
| Operating Temperature | –50 °C to +90 °C |
| Connector | FC/APC (input), FC/APC (output), MP37 metal housing |
| Brand | art photonics |
|---|---|
| Origin | Germany |
| Model | FBC-CO/CO2-10-SMA 905 |
| Connector Type | SMA 905 |
| Wavelength Range | 5–6 µm (CO) & 9–11 µm (CO₂) |
| Component Category | Optical Coupling Element |
| Compliance | CE-marked, RoHS-compliant |
| Mounting Interface | Standard optical breadboard-compatible flange |