Optical Instrument Components
Filter
Showing 151–180 of 189 results
| Brand | ZOLIX |
|---|---|
| Model | CSP Series (CSP1S, CSP1C, CSP1T, CSP1X) |
| Type | Standardized Optical Cage System Mounting Plate |
| Material | 6061-T6 Aluminum Alloy |
| Surface Finish | Black Anodized |
| Thickness Options | 4 mm, 9 mm, 12.5 mm |
| Optical Element Mounting Diameter | Ø25.4 mm (1") |
| Central Bore Options | SM05, SM1, RMS (0.800"-36), SM2, or Clear Aperture (Ø23.5–Ø50.8 mm) |
| Cage Rod Compatibility | 30 mm Center-to-Center Spacing |
| Mounting Interface | Four 30 mm Cage Rod Through-Holes with Side-Locating M2.5 Set Screws (1.5 mm Hex) |
| Base Mounting | Integrated M4 Threaded Hole (except CSP1S-25.4) |
| Max Optical Element Thickness | 3.5–5 mm |
| Travel Range (CSP1X-12) | ±6 mm |
| Graduation | 1 mm (±0.1 mm repeatability), 2° angular scale (rotational variant) |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows, compatible with ANSI/ISO standard optomechanical interfaces |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Producer |
| Product Category | Domestic |
| Model Range | Custom-Configurable DOEs for Laser Beam Shaping and Multi-Wavelength Focusing |
| Pricing | Available Upon Technical Consultation |
| Brand | ZOLIX |
|---|---|
| Model | Faraday Series |
| Sensor Probe Types | Flat (FLT), Cylindrical (CYL), Stud (SCR) |
| Measurable Gap Range | 0.2–3 mm |
| Resolution | ≤0.32 nm RMS |
| Linearity Error | <0.01% FSO (laser interferometer calibrated) |
| Analog Bandwidth Options | 20 Hz / 1 kHz / 10 kHz |
| Digital Sampling Rate | 50 kSa/s per channel (up to 8 channels parallel) |
| Output Voltage Options | 0–10 V (default), ±5 V, ±10 V |
| Zero Offset | Adjustable as % of full scale |
| Temperature Drift | 20 ppm/°C |
| Communication Interfaces | Gigabit Ethernet, SPI (20 µs update interval) |
| Vacuum Compatibility | HV, UHV, and Non-Magnetic (NM) variants available |
| Enclosure Options | Faraday.03 (max 3 channels), Faraday.08 (max 8 channels) |
| OEM Customization | Supported for probes, signal conditioning, and board-level integration |
| Brand | ZOLIX |
|---|---|
| Model | FLM1-12.7C05-800 |
| Type | Flat Mirror |
| Wavelength Range | 750–850 nm |
| Diameter | 12.7 mm |
| Surface Accuracy (pre-coating) | λ/10 @ 633 nm |
| Parallelism | ≤5 arcsec |
| Reflectivity | ≥99.8% |
| Angle of Incidence | 45° ±3° |
| Coating Method | Plasma Ion-Assisted Deposition (IAD) |
| Laser Damage Threshold | High (FLM1 Series) |
| Compliance | ISO 10110-7, MIL-C-48497A (typical for ultrafast optics) |
| Brand | ZOLIX |
|---|---|
| Model | Fresnel-03 |
| Measurement Channels | 3 |
| Working Distance | 0–10 m |
| Accuracy | < 1×10⁻⁷ m/m (wavelength-limited) |
| Periodic Nonlinearity | 4 nm (p-p, @ 5 cm) |
| Resolution | 0.03 nm (@ 5 cm) |
| Max Target Velocity | 3.8 m/s |
| Max Bandwidth | 5 MHz |
| Max Data Rate | 10 MHz |
| Target Reflectivity Range | 4%–100% |
| Measurement Laser | 1545 ± 15 nm (Class 1 DFB) |
| Guide Laser | 650 ± 15 nm (Class 1) |
| Output Interfaces | TCP/IP, BiSS-C, Quadrature Analog Signals |
| Environmental Options | UHV-Compatible, Cryogenic (-273 °C), High-Magnetic-Field (≥ 10 T) Probes |
| Brand | ZOLIX |
|---|---|
| Model | HMJ Series |
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Country of Origin | China |
| Optical Filter Technology | Interference Coating / Colored Glass Substrate |
| OD Rating | 4 (per specified wavelength) |
| Visible Light Transmission (VLT) | 45–85% (model-dependent) |
| Compliance | Meets ANSI Z136.1-2022 & EN 207:2017 requirements for laser eye protection |
| Brand | ZOLIX |
|---|---|
| Model | HXP Series |
| Type | 6-Axis Parallel Kinematic Robot (PKM) |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (Beijing Zolix Instruments Co., Ltd.) |
| Category | Optical Instrument Component / Precision Motion Platform |
| Structural Architecture | Hexapod with Dual-Universal-Joint Mounting & Six Linear Actuators |
| Drive System | Stepper-Servo Hybrid Motors with EtherCAT Bus |
| Position Retention | Power-loss position hold (no homing required on reboot) |
| Max. Horizontal Load | 10 kg |
| Max. Omnidirectional Load | 2.5 kg |
| Travel Range (X/Y) | ±34 mm |
| Travel Range (Z) | ±15 mm |
| Angular Range (θx/θy) | ±11° |
| Angular Range (θz) | ±25° |
| Linear Resolution | 0.25 µm |
| Min. Linear Displacement (X/Y) | 1 µm |
| Min. Linear Displacement (Z) | 0.5 µm |
| Min. Angular Displacement (θx/θy/θz) | 12 µrad |
| Bidirectional Repeatability (X/Y) | ±3 µm |
| Bidirectional Repeatability (Z) | ±1 µm |
| Bidirectional Repeatability (θx/θy) | ±20 µrad |
| Bidirectional Repeatability (θz) | ±25 µrad |
| Unidirectional Repeatability (X/Y) | ±0.5 µm |
| Unidirectional Repeatability (Z) | ±0.3 µm |
| Unidirectional Repeatability (θx/θy) | ±2 µrad |
| Unidirectional Repeatability (θz) | ±2.5 µrad |
| Max. Linear Speed (X/Y/Z) | 80 mm/s |
| Max. Angular Speed (θx/θy/θz) | 800 mrad/s |
| Rated Linear Speed | 50 mm/s |
| Rated Angular Speed | 500 mrad/s |
| Operating Temperature | +10 °C to +40 °C (Mechanism), 0 °C to +55 °C (Controller) |
| Construction Materials | Stainless Steel & Aerospace-Grade Aluminum Alloy |
| Mass | 12 kg |
| Cable Length | 2 m |
| Controller | TMC-LAN-HXP |
| Controller CPU | Intel x86, 2.0 GHz, 4-Core |
| RAM | 2 GB DDR3 |
| Flash Storage | 16 GB DOM |
| Non-Volatile Memory | 1 Mbit FRAM |
| OS | Windows CE |
| I/O Interfaces | 16× DI, 16× DO, 4× AI (programmable range), 4× AO (programmable range), 1× EtherCAT (RJ45), 1× Standard Ethernet (RJ45), 1× USB Host, 1× HDMI |
| Software Features | Multi-coordinate system management (World, Workpiece ×64, Mounting, Actuator, Tool ×64), Euler-angle transformation support, payload simulation, 3D pose simulation, teach-in programming, full-space calibration, SDK for C/C++/.NET integration |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Regional Classification | Domestic (China) |
| Model Range | JSL394-25 to JSL750-25, JSL589-50, JSL620-50, JSL670-50, JSL680-25, etc. |
| Optical Coating | Hard Dielectric Multilayer Interference Stack |
| Substrate Material | UV-Fused Silica or BK7 (application-dependent) |
| Diameter Options | 12.5 mm, 25 mm, 50 mm (standard) |
| Center Wavelength Range | 193 nm – 1550 nm |
| FWHM Tolerance | ±2–5 nm (depending on specification) |
| Peak Transmission | ≥30% (typical), up to ≥90% for high-efficiency variants |
| Blocking OD | ≥6 (200–1200 nm, typical), extended blocking available |
| Surface Quality | 40–20 scratch-dig |
| Parallelism | <3 arcsec |
| Wavefront Distortion | λ/4 @ 633 nm |
| Key | Brand: ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Origin Category | Domestic (China) |
| Model Range | OGW11, OGW12, OGW21, OGW22, OMD Series |
| Pricing | Upon Request |
| Brand | ZOLIX |
|---|---|
| Model | LBE Series |
| Optical Design | Galilean (2-element) |
| Wavelength Options | 532 nm, 632.8 nm, 1064 nm |
| Expansion Ratios | 2.5× to 10× |
| Max Input Aperture | 10 mm |
| Max Output Aperture | 40 mm |
| Transmission | >92%–>95% |
| Housing Material | Anodized Aluminum |
| Mounting Thread | M22×0.75 or M34×1 |
| Length | 80–188.5 mm |
| Diameter | 26–48 mm |
| Compliance | ISO 10110 optical surface specifications, RoHS-compliant coatings |
| Brand | ZOLIX |
|---|---|
| Model | LEB Series |
| Type | Reflective/Refractive Beam Expander (Galilean or Keplerian configuration) |
| Wavelength Range | 532 nm, 632.8 nm, 1064 nm |
| Expansion Ratios | 4×, 5×, 10× |
| Max Output Beam Diameter | 30–48 mm |
| Transmission | ≥92%–95% (AR-coated optics) |
| Housing Length (L) | 80–127 mm |
| Housing Diameter (D) | 37–57 mm |
| Mounting Thread | M22×0.75 |
| Construction | Precision-machined aluminum alloy housing with kinematic lens alignment |
| Compliance | ISO 10110 optical surface specifications, RoHS-compliant coatings |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Product Category | Optical Component |
| Model | Molded Aspheric Lens |
| Price Range | USD 47–128 (per unit, FOB) |
| Material Options | D-ZK3, D-ZLAF52LA, D-LAK6 |
| Coating Options | Uncoated, AR (350–700 nm), AR (600–1050 nm), AR (1000–1700 nm) |
| Mounting Options | Bare optic (unmounted), Standard kinematic mount (AMD/BMD series), Custom flange-compatible housing |
| Surface Quality | 40/20 scratch-dig |
| Wavefront Error | ≤ diffraction-limited (RMS) |
| Diameter Range | 2.0–12.2 mm |
| Focal Length Range | 1.5–18.4 mm |
| NA Range | 0.2–0.7 |
| Operating Wavelength Range | 350–2400 nm |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Type | Fixed, Linear Variable, and Circular Variable Neutral Density Filters |
| Optical Density (OD) Range | 0.0–4.0 |
| Substrate Material | Optical Glass (BK7, Fused Silica options available) |
| Surface Quality | 60-40 scratch-dig |
| Parallelism | <1 arcmin |
| Clear Aperture | ≥90% of nominal diameter/length |
| Coating | Metallic (absorptive) or Dielectric (reflective) |
| Transmission Uniformity | ±3% across clear aperture (fixed OD) |
| Wavelength Range | 400–1100 nm (optimized for 400–700 nm visible band) |
| Standard Dimensions | Ø10–Ø100 mm (circular), 3–100 mm width × 10–150 mm length (linear), 50×50 mm to 50×50 mm (square fixed) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | OBCL |
| Pricing | Available Upon Request |
| Beam Splitting Ratio | 50% R / 50% T |
| Surface Flatness | λ/4 @ specified wavelength |
| Cube Edge Lengths | 10 mm, 20 mm |
| Coating Design | Laser-line specific, non-polarizing, dielectric multilayer |
| Substrate Material | UV-grade fused silica (for UV models), BK7 (for visible/NIR), or custom IR-grade substrates |
| Angular Deviation | ≤10 arcminutes |
| Wavelength Options | 266 nm, 355 nm, 405 nm, 488 nm, 514 nm, 532 nm, 632.8 nm, 1064 nm, 1300 nm, 1550 nm |
| Broadband Models | OBCB series covering 450–1550 nm in defined bands |
| Brand | ZOLIX |
|---|---|
| Model | OBHS Series |
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Diameter Options | 25.4 mm, 30 mm, 50 mm, 50.8 mm |
| Thickness Options | 5 mm, 6.35 mm, 8 mm |
| High-Reflectance Wavelengths | 355 nm, 532 nm, 1064 nm |
| High-Transmission Wavelengths | Complementary harmonic pairs (e.g., HR @ 1064 nm / HT @ 532 nm) |
| Reflectance (HR) | ≥99.5% |
| Transmission (HT) | ≥85% (for 355/532/1064 nm combinations), ≥95% (for 532/1064 pairs) |
| Substrate Material | Fused silica or BK7 (standard) |
| Surface Quality | 20–10 scratch-dig |
| Wavefront Distortion | λ/4 @ 633 nm (typ.) |
| Damage Threshold | >5 J/cm² @ 10 ns, 10 Hz, 1064 nm (tested) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | OBPL Series |
| Pricing | Upon Request |
| Brand | ZOLIX |
|---|---|
| Model | OIS |
| Type | Polarization-Based Faraday-Free Optical Isolator |
| Core Components | Polarizing Beam Splitter Cube + Zero-Order Quarter-Wave Plate (λ/4 @ 632.8 nm) |
| Waveplate Orientation | Fast Axis at 45° to Incident P-Polarization |
| Isolation Ratio | >20 dB |
| Transmission (P-Pol) | >95% |
| Extinction Ratio (S-Pol Leakage) | <1% |
| Reflectivity (S-Pol) | >99% |
| Material Substrates | K9 Glass & Fused Silica |
| Surface Flatness | λ/4 @ 632.8 nm |
| Surface Quality | 60–40 Scratch-Dig |
| Dimensional Tolerance | ±0.2 mm |
| AR Coating | Broadband Antireflection Coating on All Input/Output Faces (R < 0.25% per surface, 400–1100 nm) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Domestic (China) |
| Model | OLB / OLA / OLBQ / OLAQ / OLBC |
| Pricing | Available Upon Request |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Origin | Domestic (China) |
| Model Series | OLB |
| Component Category | Optical Lens (Not Light Source) |
| Material Options | K9 Optical Glass (BK7) or UV Fused Silica |
| Surface Quality | 40–20 scratch-dig |
| Focal Length Tolerance | ±2% EFL |
| Diameter Tolerance | +0.0 / –0.1 mm |
| Center Thickness Tolerance | ±0.2 mm |
| Coating | Uncoated (Optional AR Coating Available per Request) |
| Available Diameters | 12.7 mm, 20 mm, 25 mm, 25.4 mm, 38.1 mm, 50 mm, 50.8 mm |
| Available EFLs | 25.4 mm to 500 mm |
| Brand | ZOLIX |
|---|---|
| Material | K9 Optical Glass |
| Focal Length Tolerance (EFL) | ±2% |
| Dimensional Tolerance | +0.0 / −0.2 mm |
| Coating | Uncoated |
| Product Category | Optical Component |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (OEM/ODM Capable) |
| Brand | ZOLIX |
|---|---|
| Model Series | OLD (K9 BK7) / OLDQ (UV Fused Silica) |
| Material | Optical Grade K9 Glass (BK7) or UV Fused Silica |
| Diameter Tolerance | +0.0 / −0.1 mm |
| Effective Focal Length (EFL) Tolerance | ±2% |
| Coating | Uncoated |
| Standard Diameters | 25 mm, 25.4 mm |
| Available EFLs | −50 mm, −100 mm, −200 mm |
| Component Category | Optical Element |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (Beijing Zolix Instruments Co., Ltd.) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Origin | Domestic (China) |
| Models | OLPA25.4-050, OLPA25.4-060, OLPA25.4-080, OLPA25.4-100, OLPA25.4-120, OLNA25.4-050 |
| Diameter | 25.4 mm |
| Focal Lengths | +50 mm to +120 mm (Positive), –50 mm (Negative) |
| Center Thickness (TC1/TC2) | 2–7.8 mm |
| Back Focal Length (fb) | 44.5–117.1 mm (Positive), –53.3 mm (Negative) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer | Yes |
| Type | Domestic Optical Component |
| Coating Options | Aluminum (Al), Protected Aluminum (Al+MgF₂), Enhanced Aluminum (EAV), UV-Enhanced Aluminum (PAUV), Silver (Ag), Protected Silver (PS), Gold (Au), Protected Gold (Au+SiO₂), Rhodium (Rh) |
| Surface Accuracy | λ/4 (standard), λ/10 (high-precision imported variants) |
| Substrate Material | Fused Silica or BK7 (standard), optional CaF₂ or IR-grade substrates |
| Diameter Range | 12.7 mm to 101.6 mm |
| Thickness Range | 4 mm to 12.7 mm |
| Brand | ZOLIX |
|---|---|
| Model | OMB Series |
| Substrate Material | BK7 |
| Surface Accuracy | λ/8 (visible), λ/4 (UV), λ/10 (IR & ultra-broadband) |
| Parallelism | ≤3 arcmin |
| Coating Type | Multi-layer dielectric |
| Reflectance | ≥97% (avg., 245–400 nm), ≥98% (avg., 400–1100 nm & 400–2000 nm), ≥97% (avg., 300–2000 nm) |
| Operating Angle of Incidence | 45° ± 3° |
| Back Surface | Polished (uncoated) |
| Diameter Options | 12.5–50 mm |
| Thickness Options | 4–10 mm |
| Wavelength Ranges | 245–400 nm (UV), 400–700 nm (VIS), 670–905 / 1200–1310 / 1408–1550 nm (NIR), 245–700 / 400–1100 / 400–2000 / 300–2000 nm (ultra-broadband) |
| Brand | ZOLIX |
|---|---|
| Model | OML Series |
| Substrate | BK7 |
| Surface Accuracy (pre-coating) | λ/10 (for OML25.4-355-6.35) |
| Diameter Options | 20 mm, 25 mm, 25.4 mm, 30 mm, 50 mm |
| Thickness Options | 4 mm, 5 mm, 6.35 mm |
| Design Wavelengths | 355 nm, 441 nm, 488 nm, 532 nm, 632.8 nm |
| Angle of Incidence | 45° ± 3° |
| Parallelism | ≤ 3 arcminutes |
| Coating Type | Multilayer dielectric stack |
| Laser Damage Threshold | High (optimized for CW and pulsed laser applications) |
| Compliance | ISO 10110-7 (surface form), ISO 14997 (laser damage testing methodology) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Producer |
| Product Category | Domestic |
| Models | OPBS10-488, OPBS20-488, OPBS10-514, OPBS20-514, OPBS10-532, OPBS20-532, OPBS10-632.8, OPBS20-632.8, OPBS10-1064, OPBS20-1064, OBPS20-0406, OBPS20-0608, OBPS20-0912, OBPS20-1215 |
| Transmission (TP) | >95% for p-polarized light |
| Reflection (RS) | >99% for s-polarized light |
| Extinction Ratio | >100:1 |
| Cube Side Length | 10 mm or 20 mm |
| Wavelength Options | 488 nm, 514 nm, 532 nm, 632.8 nm, 1064 nm (narrowband) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Producer |
| Country of Origin | China |
| Model Range | OPSP12.7, OPSP25.4, and Custom Sizes |
| Optical Aperture | Ø8.9 mm (OPSP12.7), Ø20.3 mm (OPSP25.4) |
| Wavelength Range | 400–700 nm |
| Substrate Thickness | 4 mm |
| Polarization Efficiency | >99.9% (typical extinction ratio ≥1000:1) |
| Damage Threshold (CW) | ≤100 W/cm² |
| Damage Threshold (Pulsed, 13 ns) | ≤6 J/cm² |
| Mounting | Unmounted or Optional Aluminum Ring Mount |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Producer |
| Product Category | Optical Component |
| Filter Type | Interference Filter (Narrowband, Bandpass, Edge, Notch) |
| Coating Technology | Multi-layer Dielectric Thin-Film Deposition |
| Compliance | ISO 10110-7, MIL-C-48497A (typical), RoHS-compliant materials |
| Spectral Range | UV–VIS–NIR (200–1200 nm, customizable per design) |
| Surface Quality | 60-40 scratch-dig |
| Parallelism | <3 arcsec |
| Clear Aperture | ≥90% of diameter |
| Substrate Material | Fused Silica, BK7, or CaF₂ (application-dependent) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic |
| Models | OPR Series (Right-Angle, Equilateral, Pentaprism, Corner Cube), OPRM20-20, OPRC25.4-19, PPB-10-4 to PPB-25-4, SIGMA Dove Prism, CCH-25.4-1-LEBG, etc. |
| Material Options | K9, ZF2, BK7 optical glass |
| Surface Accuracy | λ/4 typical |
| Reflective Coating | Enhanced aluminum + black paint (PPB series), uncoated or custom AR/HR options available |
| Angular Tolerance | ≤3 arcminutes (pentaprisms), ≤5 arcseconds (corner cubes) |
| Beam Deviation | ≤5″ for corner cube retroreflectors |
| Compliance | ISO 10110-7, MIL-PRF-13830B surface quality standards |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | Domestic (China) |
| Model | OTNS Series |
| Component Category | Accessory Stand |
| Construction Material | Rectangular Hollow Structural Steel |
| Surface Finish | Matte Coating |
| Fabrication Method | Full Welded Monocoque Structure |
| Adjustability | Continuously Height-Adjustable |
| Mobility | Equipped with Locking Casters and Adjustable Levelling Feet |
| Compliance | Designed for Integration with ISO 10816-1 Compliant Optical Tables |