Other Physical Property Testing Instruments
Filter
Showing 61–80 of 80 results
| Brand | Micromeritics |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ASAP 2020 |
| Pricing | Available Upon Request |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | NMI CRYOSTAT: CRYOGENFREE ULTRA LOW-VIBRATION CRYOS |
| Maximum Magnetic Field | 14.0 T |
| Temperature Range | 1.3 K to 300 K |
| Sample Diameter | Up to 49 mm |
| VTI Configuration | Top-Loading Variable-Temperature Insert |
| DSV Homogeneity | ≤0.1% over 1 cm |
| Brand | 3i |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 2 AXIS PIEZO ROTATOR |
| Pricing | Upon Request |
| Rotation Range (per axis) | ±90° |
| Angular Resolution | 1 µdeg (0.000001°) |
| Operating Temperature Range | 10 mK – 300 K |
| Maximum Magnetic Field Compatibility | 15 T |
| Compatible Carrier | Standard 20-pin Leadless Chip Carrier (LCC) |
| Drive Mechanism | Piezoelectric Motor |
| Controller Interface | USB 2.0 |
| Brand | Occhio |
|---|---|
| Origin | Belgium |
| Model | 500o / 500o HR / 500o XY |
| Measurement Principle | Digital Image Analysis (Static Imaging) |
| Dry Dispersion | Integrated Vacuum-Based System |
| Wet Dispersion | Computer-Controlled Syringe Pump with Three-Way Valve |
| Optical Configuration | Collimated 440 nm Blue LED Backlight (Transmitted) + Diffuse White LED (Reflected) |
| Camera | Progressive Scan CMOS (6.6 MP for 500o |
| Lens | Zoom Telecentric Objective |
| Pixel Resolution Range | 0.19–4.7 µm/pixel (model-dependent) |
| Field of View | Up to 10.27 × 14.00 mm (low-mag) down to 730 × 522 µm (high-mag) |
| Dry Mode Range | 0.2–3000 µm |
| Wet Mode Range | 0.8–300 µm |
| Reflectance Mode Range | 1–3000 µm |
| Analysis Time | 1–3 min per sample |
| Software | Callisto 2D (500o, 500o HR) or Callisto 3D (500o XY) |
| Compliance | ISO 13322-1 & ISO 13322-2, FDA 21 CFR Part 11 (audit trail, electronic signature, user access control), GLP/GMP-ready 3Q Validation (IQ/OQ/PQ) |
| Brand | Occhio |
|---|---|
| Origin | Belgium |
| Model | FC200 Series |
| Particle Size Range | 0.2 µm – 3 mm |
| Imaging Resolution | Down to 0.17 µm/pixel |
| Number of Morphological Parameters | 50–80 |
| Sample Volume Range | Microliter to >1 L |
| Maximum Undiluted Sample Concentration | 5% (v/v) |
| Light Source | 440–450 nm Collimated Blue LED |
| Camera Options | 5–12 MP CMOS/CCD |
| Software Platform | Callisto 2D/3D |
| Regulatory Compliance | 21 CFR Part 11, IQ/OQ/PQ (3Q) Validation Support |
| Pump Types | Peristaltic, Diaphragm, Syringe, or Integrated Injection Pumps |
| Temperature Control (FC200TC) | Ambient to 140 °C |
| Specialized Configurations | FC200M+(HR), FC200S+(HR), FC200TC, FC200P, FC200BAG, IPAC 1, IPAC 2 CMP |
| Brand | Occhio |
|---|---|
| Origin | Belgium |
| Model | SCAN Series |
| Particle Size Range | 10 µm – 50 mm (extendable to 2 µm – 20 cm) |
| Optical Resolution | Up to 600 Mpx (Scan 700) |
| Illumination | Broadband white light (350–640 nm), transmission + reflection modes |
| Imaging Sensor | High-speed CCD linear array |
| Software | Callisto 2D/3D |
| Dispersion | Dry-mode linear disperser with anti-adhesion metal coating |
| Sample Stage | 242 × 320 mm (Scan 700) |
| Compliance | ASTM D7927, ISO 9276-6, USP <1788>, GLP-ready audit trail in Callisto |
| Brand | Occhio |
|---|---|
| Origin | Belgium |
| Model | Zephyr LDA / Zephyr ESR / Morpho 3 |
| Dry Measurement Range (Zephyr LDA) | 7 µm – 5000 µm |
| Wet Measurement Range (Zephyr LDA) | 1 µm – 3000 µm |
| Dry Measurement Range (Zephyr ESR) | 30 µm – 30 mm (extendable lower limit) |
| Dry Measurement Range (Morpho 3) | 500 µm – 10,000 µm |
| Analysis Time | 1–3 min per sample |
| Camera System | 5 MP CCD (Zephyr LDA/ESR), dual 1.3 MP (Morpho 3: 24-bit color front + 8-bit monochrome side) |
| Light Source | 440 nm blue LED (Zephyr LDA/ESR), dual diffuse white LED + monochromatic LED (Morpho 3) |
| Lens Type | Telecentric (Zephyr LDA), dual telecentric (Zephyr ESR), fixed-focus (Morpho 3) |
| Dispersion | Vibratory feed + transverse vacuum (Zephyr LDA), gravity-assisted vibration (Zephyr ESR), controlled rotary vibration + linear belt transport (Morpho 3) |
| Auto-Cleaning | Compressed air + vacuum (all models) |
| Software | Callisto 3D |
| Compliance | ISO 13322-2, ASTM E2927, FDA 21 CFR Part 11 (with optional 3Q validation: IQ/OQ/PQ) |
| Dimensions & Weight | Zephyr LDA: 85 × 47 × 64 cm, 52 kg |
| Zephyr ESR | 80 × 44 × 60 cm, 43 kg |
| Morpho 3 | 99 × 52 × 60 cm, 75 kg |
| Brand | Ray-Ran |
|---|---|
| Origin | Netherlands |
| Model | DGA |
| Net Weight (3-column) | 70 kg |
| Net Weight (6-column) | 80 kg |
| Dimensions (3-column) | 850 × 400 × 1110 mm (W×D×H) |
| Dimensions (6-column) | 1200 × 400 × 1110 mm (W×D×H) |
| Power Supply | 110–240 VAC, 50–60 Hz |
| Display | 160 × 128 pixel alphanumeric graphical LCD with backlight |
| Temperature Control Accuracy | ±0.1 °C |
| Optical Magnification | 7× |
| Cooling | Integrated mini-USB compatible cooling coil |
| Pumping System | Variable-speed peristaltic pump |
| Calibration | Automated density calibration with traceable certificate |
| Compliance | CE-marked, conforms to EN 61000-6-3 and EN 61000-6-2 |
| Brand | Ray-Ran |
|---|---|
| Origin | United Kingdom |
| Model | PCP |
| Weight | 72 kg |
| Dimensions (W×D×H) | 300 × 300 × 630 mm |
| Operating Air Pressure | 10 bar (145 psi) |
| Maximum Punch Force | 50 kN |
| Compatible Die Shank Diameter | 25 mm (standard), custom shanks available |
| Cutting Plate Material | Polypropylene |
| Safety Guard | Polycarbonate interlocked shield |
| Base Footprint | 500 × 300 mm |
| Brand | Rudolph |
|---|---|
| Origin | USA |
| Model | Autoflex R837 |
| Sample Capacity | Up to 96 vials (2–50 mL) |
| Interface | RS-232, Ethernet, USB |
| Compatibility | DDM2911 Density Meter, J-Series Refractometers, Autopol Polarimeters |
| Compliance | FDA 21 CFR Part 11, GLP/GMP-ready |
| Operating Temperature Range | 15–35 °C |
| Dimensions | 420 × 520 × 380 mm (W×D×H) |
| Weight | 22 kg |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Software Integration | Rudolph WinCT-Density v5.0+ |
| Brand | Shashin Kagaku |
|---|---|
| Origin | Japan |
| Model | PV Cell Grid Line 3D Profilometer |
| Measurement Principle | White-Light Interferometry |
| Light Source Options | White LED (430–700 nm, >50,000 h), Tungsten-Halogen (400–900 nm, 10,000 h), Deuterium-Halogen (220–900 nm, 1,000 h) |
| Objective Lenses | 1× (FOV 6.6 × 8.8 mm, Optical Resolution 11 µm, Working Distance 15 mm), 5× (FOV 1.32 × 1.76 mm, Optical Resolution 2.3 µm, Working Distance 4 mm), 50× (FOV 0.132 × 0.176 mm, Optical Resolution 0.51 µm, Working Distance 3 mm) |
| Measurement Capabilities | Simultaneous 3D topography, line width (LW), line height (LH), sidewall angle, step height, roughness (Sa, Sq), and edge definition for metallized grid lines on silicon solar cells |
| Brand | SHASHIN KAGAKU |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | SQ-9000 |
| Pricing | Upon Request |
| Effective Measurement Range (X×Y×Z) | 700 × 900 × 60 mm |
| Maximum Workpiece Dimensions (X×Y×Z) | 1000 × 1250 × 60 mm |
| Maximum Workpiece Thickness | 60 mm |
| Minimum Readout Unit | 0.1 µm |
| XY Measurement Accuracy | U₁ = (3 + L/250) µm, U₂ = (4 + L/230) µm |
| Z-Axis Measurement Accuracy | (1.5 + 4L/1000) µm |
| Brand | AMAE |
|---|---|
| Model | MI-101 |
| Origin | Guangdong, China |
| Instrument Type | Tamping Rod for Flow Moisture Point (FMP) and Transportable Moisture Limit (TML) Testing |
| Compliance | IMSBC Code Annex 1, Section 4.2 (Proctor–Fagerberg Method) |
| Application | Solid Bulk Cargo Stability Assessment |
| Brand | TQC Sheen |
|---|---|
| Country of Origin | Netherlands |
| Model | CurveX 4 |
| Dimensions | 110 × 85 × 35 mm |
| Weight | 190 g (6.7 oz) |
| Housing Material | Anodized Aluminum |
| Operating Temperature | 0–60 °C |
| Measurement Range | −200 to 1300 °C |
| Accuracy | ±1 °C (±1.8 °F) |
| Battery Life | Up to 35 h (rechargeable Li-ion via USB-C) |
| Data Storage | 20 batches, 50,000 readings total |
| Sampling Interval | 1 s to 60 min (user-programmable) |
| Channels | 8 thermocouple inputs (Type K standard) |
| Display | Triple-color LED status indicators |
| Interface | USB-C (data export & charging) |
| Compliance | Qualicoat, GSB, ISO 9001, QIB, and ASTM D3003-22 (for thermal profiling in coating cure validation) |
| Brand | TQC Sheen |
|---|---|
| Origin | Netherlands |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Dry/Wet Scrub Resistance Tester |
| Price | Upon Request |
| Brand | TQC Sheen |
|---|---|
| Origin | Netherlands |
| Model | SH0586-4500N, SH0590-4700N |
| Spray Nozzles | 12 |
| Adjustable Nozzle-to-Panel Distance | Yes |
| Spray Stroke Length | 400 mm (SH0586-4500N), 250/500 mm (SH0590-4700N) |
| Spray Pressure Range | 0.5–5 bar |
| Max Spray Area per Nozzle | 350 × 500 mm (SH0586-4500N), 500 × 500 mm (SH0590-4700N) |
| Traverse Speed | 20–800 mm/sec |
| Standard Panel Lift Between Coats | 40/50 mm |
| Flash-Off Timer Range | 0–10 min |
| Coat Counter Range | 1–9999 |
| Pass Counter Range | 1–9999 |
| Manual Spray Toggle & Traverse Control | Yes |
| Magnetic Panel Holder | Yes |
| Sample Capacity (100 × 150 mm) | 48 panels |
| Air Supply Requirement | 10 bar (150 psi), pneumatic |
| Dimensions (W × D × H, no options) | 70 × 72 × 160 cm (SH0586-4500N), 90 × 72 × 160 cm (SH0590-4700N) |
| Weight | 70 kg (SH0586-4500N), 90 kg (SH0590-4700N) |
| Compliance | ASTM D823/A |
| Brand | TQC Sheen |
|---|---|
| Origin | Netherlands |
| Model | SP1820 (Metric) / SP1822 (Imperial) |
| Dimensions (Unit) | 140 × 170 × 340 mm |
| Weight (Unit) | 4150 g |
| Max Panel Size | 150 × 100 mm |
| Max Panel Thickness | 1 mm |
| Mandrel Set Count | 14 (SP1820) / 7 (SP1822) |
| Mandrel Diameters | 2–32 mm (SP1820) / 1/8–1 in (SP1822) |
| Base Frame Dimensions | 100 × 130 × 160 mm |
| Load Arm Mass (with mandrel) | 2900 g (SP1820) / 1740 g (SP1822) |
| Brand | AiYao Instruments |
|---|---|
| Origin | Hubei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | TRT |
| Pricing | Available Upon Request |
| Brand | Zehntner |
|---|---|
| Origin | Switzerland |
| Model | ZVL2190 |
| Compliance | DIN EN ISO 17872 |
| Cutting Tip Material | Tungsten Carbide |
| Overall Length | 150.50 mm |
| Diameter | Φ13.65 mm |
| Weight | 131 g |
| Warranty | 12 months |
| Brand | ZEPTOOLS |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Origin Category | Domestic (China) |
| Model | SEM Cryogenic Vacuum Transfer System |
| Pricing | Upon Request |
| Cooling Stage Temperature Range | −170 °C to +100 °C |
| Cooling Stage Temperature Stability | ≤ ±0.1 °C |
| Cooling Stage Rotation | 0–360° continuous |
| Cooling Stage Tilt Angle | ≥55° |
| Cold Trap Temperature | ≤ −190 °C |
| Cold Trap Temperature Stability | ≤ ±0.5 °C |
| Cooling Stage Cool-down Time to −170 °C | ≤35 min |
| Cold Trap Cool-down Time to −190 °C | ≤20 min |
| Bake-out Capability | ≥100 °C |
| Liquid Nitrogen Capacity | 35 L |
| Continuous Operation Duration | >8 h |
| LN₂ Refill Port | Hot-swap compatible (no system shutdown required) |
| Vacuum Transfer Chamber | Enables glovebox ↔ FIB ↔ SEM cryo-transfer |
| Vacuum Load Lock | Integrated for rapid, contamination-controlled SEM insertion |
| Control System | Integrated PLC-based HMI with real-time temperature/vacuum monitoring and logging |