Other Physical Property Testing Instruments
Filter
Showing 31–60 of 489 results
| Brand | Aolong |
|---|---|
| Origin | Liaoning, China |
| Manufacturer Type | Manufacturer |
| Region Category | Domestic |
| Model | CHIRAD165 |
| Pricing | Upon Request |
| Max. X-ray Tube Voltage | 160 kV |
| Beam Angle | 40° |
| Max. System Power | 6000 W |
| Focal Spot Size | 5.5 mm |
| SSD (Source-to-Sample Distance) | OEM-defined |
| Dose Rate Range | >600 Gy/min |
| Real-time Dosimetry | Yes (dose rate, cumulative dose, irradiation time) |
| Cooling System | Integrated closed-loop heat exchanger |
| Stage | Motorized wafer stage with XYZ motion and ±45° rotation |
| Control System | PLC-based |
| Safety Interlocks | Door interlock + warning light |
| Chuck | Coaxial high-temperature vacuum chuck (OEM) |
| Microscope | PSM1000 stereomicroscope with 2-MP HDMI CCD (optional) |
| Microscope Stage | 2″ × 2″ XY travel |
| Vibration-Isolation Table | 900 mm × 800 mm (final dimensions subject to integration) |
| Probe Interface | 3-axis coaxial probe holder |
| Auxiliary Equipment | Air compressor included |
| Optional Accessories | Low/high-temperature coaxial chucks, semi-automated probe station, dry-air purge system |
| Brand | Applied NanoFluorescence |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | Nano Spectralyzer NS3 |
| Pricing | Available Upon Request |
| Brand | Asada |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | JK3600 |
| Pricing | Available Upon Request |
| Detectable Hole Diameter Range | 0.15–10 mm |
| PCB Size Capacity | 100 × 150 mm to 630 × 650 mm |
| PCB Thickness Range | 0.3–10 mm |
| Max. Hole Count per Board | 150,000 |
| Inspection Speed | 3.5–12.5 m/min (adjustable) |
| Hole Position Repeatability | ±40 µm |
| Hole Dimension Tolerance | ±40 µm |
| Minimum Hole-to-Hole Edge Distance | 0.15 mm |
| Detection Method | Contact Image Sensor (CIS) Proximity Imaging |
| Light Source | Diffuse Long-Strip LED Array |
| Power Supply | AC 220 V, 50 Hz |
| Machine Dimensions (L×W×H) | 3550 × 1200 × 1100 mm |
| Compressed Air Requirement | 0.5–0.7 MPa |
| Weight | 450 kg |
| Brand | Asida |
|---|---|
| Model | CQ1000 |
| Application | Precision slitting and blanking of uncured fiberglass-reinforced epoxy prepreg (PP) rolls used in PCB and copper-clad laminate (CCL) manufacturing |
| Cutting Principle | Non-contact localized thermal softening followed by mechanical shearing |
| Max. Roll Diameter | 320 mm |
| Cutting Length | 50–750 mm |
| Cutting Width | 200–1270 mm |
| Material Thickness | 0.04–0.3 mm |
| Positioning Accuracy | ±1.0 mm |
| Web Speed | ≤60 m/min |
| Cycle Rate | ≤13 cuts/min (at 500 mm length) |
| Power Supply | 3-phase 5-wire, AC380 V / 50 Hz / ≥40 A |
| Compressed Air | 0.7–1.0 MPa |
| Ambient Requirements | 20 °C ±2 °C, 50 %RH ±5 %RH |
| Footprint | 2600 × 2300 × 1700 mm (L×W×H) |
| Weight | ~1500 kg |
| Avg. Power Consumption | ≤9 kW |
| Compliance | Designed for ISO 9001-aligned production environments |
| Brand | ASIDA |
|---|---|
| Model | CQ1000 |
| Origin | Guangdong, China |
| Type | Fully Automatic Prepreg Slitting & Hot-Cut System |
| Cutting Length | 50–750 mm |
| Cutting Width | 200–1270 mm |
| Material Thickness | 0.04–0.3 mm |
| Cutting Accuracy | ±1.0 mm |
| Web Speed | ≤60 m/min |
| Cutting Frequency | ≤13 cuts/min (at 500 mm length) |
| Machine Dimensions | 2600 × 2300 × 1700 mm |
| Weight | ~1500 kg |
| Power Supply | 3-phase 5-wire, AC380 V / 50 Hz / ≥40 A |
| Air Pressure | 0.7–1.0 MPa |
| Ambient Temp | 20 ± 2 °C |
| RH | 50 ± 5 % |
| Max Roll Diameter | ≤320 mm |
| Average Power Consumption | ≤9 kW |
| Brand | B&E / Balentine Enterprises |
|---|---|
| Origin | USA |
| Model | D3265 |
| Compliance | ASTM D3265-22 |
| Purity | ≥99.9% ZnO |
| Specific Surface Area | 2.97 m²/g |
| Moisture | 0.09% |
| Brand | ATAGO |
|---|---|
| Origin | Japan |
| Model | PAL-1 |
| Measurement Range | 0.0–53.0% Brix |
| Temperature Compensation | Automatic (ATC) |
| Display | LCD with digital readout |
| Sample Volume | Approx. 0.3 mL |
| Measurement Time | ~3 seconds |
| Calibration | Single-point using distilled water or standard sucrose solution |
| Compliance | Designed per JIS K 0064 and ISO 2173 for refractometric Brix determination |
| Brand | ATEQ |
|---|---|
| Model | F5800-MR |
| Origin | France |
| Measurement Principle | Vacuum Decay |
| Compliance | ASTM F2338-09, FDA 21 CFR Part 11 (data integrity), ISO 8573-1 (air quality) |
| Test Volume | <7 mL |
| Sensitivity | ≥0.02 cc/min (equivalent to ~1.5 µm equivalent leak diameter) |
| Operating Temperature | 10–45 °C |
| Power Supply | 100–240 VAC, 50 W |
| Dimensions (W×H×D) | 450 × 150 × 356 mm |
| Weight | 20 kg |
| Display | Color touchscreen HMI |
| Pressure Sensors | Dual high-stability absolute pressure sensors |
| Data Traceability | Audit trail, electronic signatures, method versioning |
| Validation Support | IQ/OQ/PQ documentation package, 3Q validation-ready |
| Brand | ATEQ |
|---|---|
| Model | F6900-EC |
| Origin | France |
| Type | Vacuum Decay Leak Detection System |
| Compliance | ASTM F2338-09 |
| Internal Volume | Minimized Dead Volume |
| Power Supply | 100–240 VAC, 50 W |
| Drive Air Pressure | 400–600 kPa |
| Test Air Pressure | +1–2 bar above test pressure |
| Air Quality | ISO 8573-1 Class 4 or better |
| Operating Temperature | 10–45 °C |
| Storage Temperature | 0–60 °C |
| HMI | Color TFT Display with Intuitive Menu Navigation |
| Optional Accessories | Micro-flowmeter, Custom Vial Test Chamber, Certified Leak Standards |
| Brand | ATLANTEK |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Imported |
| Model | Model 400 |
| Pricing | Available Upon Request |
| Printing Method | Direct Thermal Printing |
| Print Resolution | 300 dpi |
| Print Width | 53 mm |
| Sample Width Capacity | 100 mm |
| Print Head Technology | Thin-Film Resistive (Corner-Type) |
| Print Speed Options | 10 in/s (programmable at three discrete settings) |
| Adjustable Parameters | Print Head Pressure, Print Head Position |
| Interface | RS-232 Serial |
| Power Supply | 115 V / 60 Hz or 220 V / 50 Hz |
| Test Patterns | Checkerboard, Solid Fill, UPC-A Barcode, User-Defined Patterns |
| Test Modes | Dynamic Reaction Sequence (10 energy steps), Full-sequence or single-step execution, repeat counts per step: 1×, 5×, or 10× |
| Brand | Auniontech |
|---|---|
| Model | AR-2000 |
| Temperature Range | 500–1500 °C (custom ranges available) |
| Optical Fiber Probe Length | 2 m (custom lengths available) |
| Working Distance | 400 mm |
| Spot Size | 5 mm @ 400 mm |
| Spectral Bands | 1.3 µm & 1.5 µm |
| Laser Safety Class | 3B (measuring beam), Class 2 (aiming laser) |
| Temperature Resolution | 1 °C |
| Typical Uncertainty | ±10 °C @ 1500 °C |
| Measurement Rate | 10 Hz (100 Hz optional) |
| Output Interfaces | 4–20 mA, 0–10 V, Ethernet |
| Data Storage | SD card (up to 32 GB) |
| Display | 7-inch touchscreen or remote PC interface |
| Dimensions (electronics unit) | 210 × 140 × 250 mm |
| Weight | 2.5 kg |
| Operating Ambient | 15–30 °C |
| Power Supply | 80–260 V AC to 24 V DC adapter |
| Brand | Balentine Enterprises (B&E) |
|---|---|
| Origin | USA |
| Supplier Type | Authorized Distributor |
| Import Status | Imported |
| Model | D3265 ZnO |
| Price | Upon Request |
| Specific Surface Area | 2.97 m²/g |
| Pb Content | ≤0.0011% |
| Cd Content | <0.0001% |
| Fe Content | <0.0001% |
| Moisture | 0.09% |
| ZnO Purity | >99.9% |
| +325 Mesh Retain | <0.0001% |
| Brand | Bareiss |
|---|---|
| Origin | Germany |
| Model | HDA 325 |
| Hardness Measurement Principle | Shore A (ASTM D2240, ISO 7619-1) |
| Density Measurement Principle | Archimedes’ Principle with Precision Buoyancy Weighing |
| Cycle Time (Hardness + Density) | <20 s per sample |
| Dual-Channel Density Option | ~10 s per sample |
| Operating Duty Cycle | 24/7/365 continuous operation |
| Temperature Monitoring Option | Integrated surface temperature sensor (range: 20–70 °C, resolution: ±0.1 °C) |
| Data Traceability | Sample ID, timestamp, operator ID, environmental metadata |
| Compliance | ISO/IEC 17025-ready architecture, supports GLP/GMP audit trails, FDA 21 CFR Part 11 compliant data handling (with optional electronic signature module) |
| Brand | Beijing North Guang Precision Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | BEST-911 |
| Price | USD 3,500 (FOB Beijing) |
| Measurement Range | 10⁻⁹ Ω·m to 10¹¹ Ω·m |
| Accuracy | ±1% to ±5% |
| Electrometer Input Resistance | ≥10¹⁴ Ω |
| Electrometer Voltage Range | ±100 mV to ±200 V |
| Picoammeter Sensitivity | 1 fA (1×10⁻¹⁵ A) |
| Adjustable DC Voltage Source Accuracy | ±1% |
| Electrode Configuration | Standard Four-Electrode Fixture Included |
| Current Electrode Spacing | 100 mm |
| Potential Electrode Spacing | 20 mm |
| Insulating Base Resistivity | ≥10¹⁴ Ω·m |
| Applied Test Pressure | 3.25 N |
| Net Weight | 331 g |
| Brand | Beishide Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | BSD-BET400 |
| Pricing | Upon Request |
| Brand | Beishide Instrument |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | BSD-MAB- |
| Pricing | Upon Request |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | LIT MK 240 |
| Temperature Range | −40 °C to +110 °C (extendable to +120 °C with dual safety cut-off) |
| Temperature Uniformity | ±0.1 K to ±1.2 K (dependent on setpoint) |
| Temperature Stability | ±0.1 K to ±0.5 K |
| Heating Rate (IEC 60068-3-5) | 5 K/min |
| Cooling Time (110 °C → −40 °C) | 160 min |
| Average Cooling Rate (IEC 60068-3-5) | 3.5 K/min |
| Thermal Compensation at 25 °C | 3000 W |
| Rated Voltage | 400 V or 480 V AC, 3~ |
| Frequency | 50/60 Hz |
| Nominal Power | 5.6 kW |
| Fuse Rating | 16 A |
| Internal Volume | 228 L |
| Net Weight (empty) | 375 kg |
| Max. Load Capacity | 70 kg |
| Shelf Load per Rack | 30 kg |
| Viewing Window | 508 mm × 300 mm (heated, LED-lit) |
| Internal Dimensions (W×H×D) | 735 mm × 700 mm × 443 mm |
| External Dimensions (W×H×D) | 1335 mm × 1929 mm × 925 mm |
| Rear Clearance | 300 mm |
| Side Clearance | 200 mm |
| Sound Pressure Level | 62 dB(A) |
| Safety Systems | Dual independent Class 2 temperature cut-offs (DIN 12880), CO/H₂/O₂/temperature gas monitoring, CO₂ fire suppression, reinforced door lock, reversible stainless-steel pressure relief valve, APT.line™ pre-heating chamber, condensation protection programming, fluorine-free refrigerant R-452A |
| Control Interface | Touchscreen controller with time-segment & real-time programming, APT-COM™ Basic software, Ethernet interface, USB data export (open CSV format), internal datalogger, 230 V socket on right-side panel |
| Standard Equipment | 1 stainless-steel shelf, compressed-air-cooled refrigeration unit |
| Brand | BINDER |
|---|---|
| Origin | Germany |
| Model | LIT MK 720 |
| Temperature Range | –40 °C to +110 °C |
| Temperature Uniformity (±K) | 0.1–0.5 |
| Temperature Stability (±K) | 0.3–2.0 |
| Avg. Heating Rate (IEC 60068-3-5) | 4 K/min |
| Avg. Cooling Rate (IEC 60068-3-5) | 3.4 K/min |
| Internal Volume | 734 L |
| Max. Load Capacity | 160 kg |
| Net Weight | 570 kg (LIT MK 720-400V) / 522 kg (LIT MK 720-480V-C) |
| Power Supply | 400 V, 3~ |
| Refrigerant | R-452A |
| Sound Pressure Level | 65–67 dB(A) |
| Brand | Binsfeld |
|---|---|
| Origin | USA |
| Model | TT10K |
| Transmitter Dimensions | 25 mm × 41 mm × 64 mm |
| Transmitter Weight | 85 g |
| Operating Temperature | −30 °C to +85 °C |
| Battery Life | 24 h (9 V Li battery, 350 Ω bridge, 25 °C) |
| Excitation Voltage | 2.5 VDC ±0.1% |
| Supply Voltage (Transmitter) | 7.5–18 VDC |
| Transmit Current (Active) | 40 mA typical, 50 mA max |
| Transmit Current (Standby) | 4 mA typical, 5 mA max |
| Gain Range | 500–16,000 (6 selectable steps) |
| Frequency Response | 0–500 Hz (−3 dB at 500 Hz), adjustable low-pass filtering |
| Output Delay | 4.2 ms typical (500 Hz filter setting) |
| Sampling Rate | 2400 samples/sec |
| ADC Resolution | 14-bit |
| Output Options | ±10 VDC analog (field-adjustable gain 0.25× to 4.0×), RS-232 serial (DB9) |
| Transmission Band | 902–925 MHz |
| Line-of-Sight Range | ≥6 m (20 ft) |
| Centrifugal Tolerance | 3000 g (e.g., 5700 RPM on 102 mm shaft) |
| Strain Gauge Compatibility | Full-bridge, 350 Ω standard (1000 Ω optional) |
| Bridge Excitation | 2.5 VDC |
| Bias Error | ±0.25% of reading or ±0.16% FS (at gain = 4000, 25 °C) |
| Remote Control | IR-based, up to 3 m line-of-sight, enables channel selection, gain/FS adjustment, shunt calibration, and standby activation without disassembly |
| Brand | Binsfeld |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TPM2 |
| Pricing | Upon Request |
| Brand | Binsfeld |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | TT |
| Pricing | Upon Request |
| Brand | Binsfeld |
|---|---|
| Origin | USA |
| Model | TT10K-LP |
| Operating Frequency | 903–925 MHz |
| Transmitter Dimensions | 17 mm × 26 mm × 51 mm |
| Transmitter Weight | 31 g |
| Battery Life (Active Mode) | 48 h (9 V Li battery, 350 Ω bridge, 25 °C) |
| Standby Current | 0.5 mA typical |
| Excitation Voltage | 3 VDC ±0.1% (bridge), 6–25 VDC (transmitter input) |
| Gain Range | 500–16,000 (6 selectable steps) |
| Bandwidth | 0–500 Hz (−3 dB at 500 Hz), programmable filtering |
| Output | ±10 VDC analog + RS-232 digital (DB9) |
| IP Rating | IP67 (transmitter with optional housing) |
| Operating Temperature | −30 to +85 °C |
| Resolution | 14-bit ADC |
| Bias Error | ±0.25% of reading (gain = 4000, 25 °C) |
| Signal Delay | 4.2 ms typical (500 Hz filter) |
| Sampling Rate | 2400 samples/sec |
| Strain Gauge Compatibility | Full-bridge, 350 Ω standard (1000 Ω supported) |
| Remote Control | IR-based, up to 3 m range, enables gain adjustment, shunt calibration, channel selection, and standby mode activation |
| Channel Capacity | 16 simultaneous systems |
| Centrifugal Acceleration Tolerance | 2000 g (steady-state) |
| Brand | Bristol |
|---|---|
| Origin | USA |
| Model | 521 |
| Wavelength Range | 400–1100 nm (521-VIS) / 500–1700 nm (521-NIR) |
| Absolute Accuracy | ±10 ppm |
| Repeatability | ±5 ppm |
| Calibration Source | Built-in Moiré fringe reference |
| Measurement Rate | 10 Hz |
| Minimum Input Power | 5–30 µW (wavelength-dependent) |
| Input Interface | Pre-aligned FC/PC fiber port (free-space coupling optional) |
| Display Resolution | 6 digits |
| Units | nm, cm⁻¹ (vacuum or air), GHz |
| Dimensions (H×W×L) | 64 × 140 × 229 mm |
| Brand | Bristol |
|---|---|
| Origin | USA |
| Model | 621 |
| Wavelength Range | 350 nm – 11 µm (configurable by variant) |
| Absolute Accuracy | ±0.2 ppm (VIS/NIR), ±0.75 ppm (IR/MIR/XIR) |
| Repeatability | ±0.03 ppm (VIS/NIR), ±0.06–±0.1 ppm (IR–XIR) |
| Calibration Source | Internal Stabilized HeNe Laser |
| Minimum Input Power | 5–65 µW (wavelength-dependent) |
| Interface | High-Speed USB 2.0 |
| Display Resolution | 9 digits (621A), 8 digits (621B) |
| Units | nm, cm⁻¹ (vacuum/atmospheric), GHz |
| Input Options | FC/PC fiber (VIS/NIR), 2 mm collimated beam with alignment red pilot (IR+) |
| Brand | Bristol |
|---|---|
| Origin | USA |
| Model | 821-B |
| Wavelength Range | 350–1700 nm (VIS: 350–1100 nm |
| NIR | 630–1700 nm) |
| Absolute Accuracy | ±0.02 cm⁻¹ (±0.001 nm @ 700 nm |
| Repeatability | ±0.002 cm⁻¹ (±0.0001 nm @ 700 nm |
| Calibration Source | Integrated HeNe laser |
| Measurement Rate | Up to 200 Hz |
| Input Interface | Pre-aligned FC/PC fiber port (free-space coupling optional) |
| Minimum Pulse Energy | 15 µJ @ 350 nm, 1 µJ @ 700 nm, 100 µJ @ 1100–1700 nm |
| Display Resolution | 8 digits |
| Units | nm, cm⁻¹ (vacuum or air), GHz |
| Dimensions (H×W×L) | 190 × 165 × 381 mm |
| Brand | Brookfield |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | DV2T Gel Timer |
| Price | Upon Request |
| Brand | Guance Instruments |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Authorized Distributor |
| Region of Origin | Domestic (China) |
| Model | DW-1000 |
| Price | USD 2,800 (FOB Beijing) |
| Max Output Current | 1000 A AC |
| Temperature Channels | 2 independent acquisition + 1 closed-loop control |
| Control System | Siemens S7-1200 PLC + 15″ HMI touchscreen |
| Power Supply | 380 VAC ±10%, 50 Hz ±0.5 Hz, 20 kW |
| Ambient Operating Range | −30–40 °C, ≤85% RH, ≤1000 m altitude |
| Enclosure Dimensions (L×W×H) | 1400 × 1150 × 1700 mm |
| Weight | 500 kg |
| Protection | Overcurrent, overtemperature, grounding fault, voltage anomaly, seismic-rated (horizontal 3 m/s² / vertical 1.5 m/s²) |
| Grounding Resistance | ≤4 Ω |
| Brand | FLOXLAB |
|---|---|
| Origin | France |
| Model | SDIM100 |
| Standard Compliance | ASTM D4644, ISRM Suggested Method |
| Rotational Speed | 20 rpm |
| Dimensions (W×H×L) | 300 × 500 × 500 mm |
| Weight | 30 kg |
| Power Supply | 220 V, 50/60 Hz |
| Brand | NYX |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | NY-715E2 |
| Pricing | Upon Request |
| Test Stations | 2 |
| Sample Size | 140 × 140 mm |
| Rotational Speed | 60 ± 2 rpm |
| Tumbler Geometry | Octagonal, Flat-to-Flat Width 224.5 mm, Depth 228 mm |
| Snagging Pins per Tumbler | 4 rods × 20 pins each |
| Pin Diameter | 1 mm |
| Pin Inclination Angle | 60° |
| Pin Protrusion Length | 5 mm |
| Sample Mounting Tube ID | 25 ± 1 mm, Wall Thickness: 3 ± 0.5 mm, Length: 70 ± 1 mm (4 tubes per tumbler) |
| Cycle Counter Range | 0–999,999, Programmable |
| Control Interface | Industrial Touchscreen HMI |
| Brand | A2PS/A2 Photonic Sensors |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Category | Imported Instrument |
| Model | BUZZ-1015 |
| Pricing | Upon Request |
| Measurement Principle | Impulse Excitation / Laser Doppler Vibrometry |
| Frequency Range | 0.5 Hz – 2.5 MHz |
| Accuracy | Better than ±1.0% (resonance frequency), ±0.1% typical for fundamental mode identification |
| Test Duration | Seconds per measurement |
| Damping Factor Range | 10⁻⁵ – 10⁻¹ |
| Sample Dimensions | ≤ 200 × 180 × 180 mm (rectangular or cylindrical) |
| Temperature Range | Ambient to 1500 °C (protection limit) |
| Vacuum Level | < 1 × 10⁻² Pa (operational), < 5 × 10⁻⁸ Torr (base pressure) |
| Compliant Standards | ASTM C1259, ASTM E1876, ISO 12680 |