Physical Property Testing Instruments
Filter
Showing 4681–4710 of 4752 results
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | LHS-80HC-I |
| Instrument Type | Upright |
| Condensation Method | Air-Cooled |
| Humidity Range | 40–85% RH |
| Temperature Fluctuation | ±0.5°C (High Temp), ±1.0°C (Low Temp) |
| Humidity Deviation | ±3% RH |
| Interior Chamber Dimensions | 400 × 400 × 500 mm (W × D × H) |
| Brand | Yiheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | LYW Series |
| Salt Fog Deposition Rate | 1.0–2.0 mL / 80 cm²·h |
| Temperature Range | RT+5°C to 50°C |
| Brand | Youyunpu |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YP-371 |
| Detection Method | Automated Eddy Current Inspection |
| Form Factor | Benchtop |
| Frequency Range | 50 Hz – 10 MHz |
| Gain Adjustment | 0 dB – 99 dB (continuous) |
| Phase Rotation | 0° – 359° (continuous) |
| X/Y Gain Ratio | 0.1 – 10.0 |
| Phase Amplification Factor | 1 – 10 (patented) |
| Probe Drive Level | 1 – 8 (adjustable) |
| Probe Matching Level | 0 – 3 (adjustable) |
| Maximum Scan Speed | 10 m/s |
| Operating Temperature | −10 °C to +50 °C |
| Probe Operating Temperature | −20 °C to +50 °C |
| Enclosure | Sealed plastic housing with protective rubber boot |
| Weight (with battery) | 2.3 kg |
| Battery Runtime | Up to 6 hours |
| Charging Time | 2–4 hours (on-screen status indicator) |
| Power Input | 100–240 V AC, 50–60 Hz |
| Power Consumption | 20 W |
| Dimensions | 240 mm × 150 mm × 70 mm |
| Data Management | Auto-save and auto-replay of inspection records |
| Brand | Youyunpu |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YP-41 |
| Detection Method | Fully Automated Eddy Current Inspection |
| Eddy Current Signal Type | Multi-Frequency (Quad-Frequency) |
| Instrument Form Factor | Benchtop |
| Number of Channels | 4 |
| Maximum Inspection Speed | >200 m/min |
| Frequency Range | 50 Hz to 10 MHz (continuously adjustable) |
| Gain Range | 0–99.0 dB (continuously adjustable, 0.1 dB step) |
| Brand | Youyunpu |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YP-66S |
| Detection Mode | Automated In-Line Inspection |
| Form Factor | Benchtop |
| Frequency Range | 50 Hz – 10 MHz |
| Gain Adjustment | 0–99 dB (wide-range, continuous) |
| Phase Rotation | 0°–359° (continuous) |
| X/Y Gain Ratio | 0.1–10.0 |
| Phase Amplification Factor | 1–10 (patented) |
| Probe Drive Level | 1–8 (adjustable) |
| Probe Matching Level | 0–3 (adjustable) |
| Maximum Scan Speed | 10 m/s |
| Operating Temperature (Probe) | −20 °C to +50 °C |
| Operating Temperature (Instrument) | −10 °C to +50 °C |
| Enclosure | Sealed Plastic Housing with Protective Sleeve |
| Weight (with battery) | 2.3 kg |
| Battery Runtime | Up to 6 hours |
| Charging Time | 2–4 hours (on-screen status indicator) |
| Power Supply | Universal AC 100–240 V, 50–60 Hz |
| Power Consumption | 20 W |
| Dimensions | 240 mm × 150 mm × 70 mm |
| Data Management | Auto-storage & playback capability |
| Brand | Youyunpu |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Laboratory Laser Diffraction Particle Size Analyzer |
| Measurement Range | 0.1 µm – 500 µm |
| Reproducibility | < 0.5% RSD |
| Measurement Time | < 60 seconds per analysis (excluding sample dispersion) |
| Dispersion Method | Wet Dispersion |
| Laser Source | 635 nm semiconductor laser (3 mW output, >25,000 h lifetime) |
| Detection Channels | 76 independent photodiode elements |
| Ultrasonic Power | 50 W |
| Stirring Speed | 100–600 rpm (adjustable) |
| Sample Concentration Range | 0.05–1.0% w/v (dependent on particle density, size distribution, and refractive index) |
| Data Acquisition Rate | 2000 scans/sec |
| Interface | RS-232 serial port |
| Operating System Compatibility | Windows 95 or later |
| Power Supply | AC 220 V ±10%, 50/60 Hz, 200 W |
| Environmental Requirements | 5–35 °C ambient temperature, <85% relative humidity |
| Brand | Yoyi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GDW-225L(A/B/C) |
| Temperature Range | A: −20 °C to 150 °C |
| B | −40 °C to 150 °C |
| C | −60 °C to 150 °C |
| Humidity Range | 20–98% RH |
| Humidity Deviation | ±3–5% RH |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Resolution | 0.1 °C |
| Heating Method | Nickel-Chromium Alloy Heater |
| Refrigeration System | Hermetic Imported Compressor with Eco-Friendly Refrigerant (R404A/R23) |
| Control System | TEMI PID-Based Intelligent Controller |
| Programmability | 100-Stage Multi-Segment Program |
| Power Supply | AC380V 50Hz |
| Internal Volume | 225 L |
| Internal Dimensions (W×D×H) | 600×500×750 mm |
| External Dimensions (W×D×H) | 1115×1085×1885 mm |
| Standard Accessories | 2 Fixed + 10 Adjustable 304 Stainless Steel Shelves, Left-Side Test Port, Triple-Layer Insulated Observation Window with Defrosting & Illumination, Silicone Door Seal, RS485/USB Interface (Optional) |
| Brand | Youyunpu |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | YP-3711 |
| Detection Method | Automatic Eddy Current Testing |
| Eddy Current Signal Type | Multi-Frequency |
| Instrument Form Factor | Benchtop |
| Number of Channels | 1–16 |
| Maximum Inspection Speed | >200 m/min |
| Frequency Selection Options | 1–4 independent frequencies |
| Gain Range | 0–90 dB (0.5 dB step) |
| Frequency Range | 50 Hz – 10 MHz |
| Phase Rotation | 0–360° (1° step) |
| High-Pass Filter | Off or 1–2 kHz |
| Low-Pass Filter | Off or 1–2 kHz |
| Digital Filter Points | 1–10 |
| End-Delay/Start-Delay | 0–65 s |
| Marking Delay Time | 0–120 s |
| Fixed-Length Marking Distance | 0–5 m |
| Clock Mode | Internal or External |
| Probe Excitation Amplitude | 1–8 (arbitrary units) |
| Hardware Alarm Outputs | 8 channels |
| Probe Impedance Matching | 0–3 (digital tuning steps) |
| Input Signal Types | TTL-level switch signals (alarm, A-scan trigger, encoder pulse) |
| Display Modes | Dot, Line, Blank, Crosshair Cursor |
| Dimensions | 459.8 × 442 × 179 mm (standard) / 459.8 × 442 × 220.7 mm (with extended module) |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-XXW-SD Series |
| Price Range | USD 28,000 – 70,000 (FOB) |
| Internal Dimensions (D×W×H) | Customizable per client specification |
| Temperature Range | 20–50 °C |
| Temperature Uniformity | ±1 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Heating Rate | 0.5 °C/min (customizable) |
| Humidity Range | 50–90 % RH |
| Humidity Uniformity | ±3 % RH |
| Power Supply | 220 V / 50 Hz |
| Data Storage | 64 MB internal cyclic memory + SD card export + optional real-time PC logging via RS485 |
| Remote Monitoring | Supported via Sims software over LAN/internet (up to 30 units per host) |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-XXW-SD Series |
| Price Range | USD 28,000 – 70,000 (FOB) |
| Internal Dimensions (D×W×H) | Custom-engineered per client specification |
| Temperature Range | 20–50 °C |
| Temperature Uniformity | ±1 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Heating Rate | 0.5 °C/min (adjustable per configuration) |
| Humidity Range | 50–90 % RH |
| Humidity Uniformity | ±3 % RH |
| Power Supply | 220 V / 50 Hz |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-2231 |
| Temperature Range (High/Low Zones) | +60°C to +200°C / −10°C to −70°C |
| Shock Transition Time (2-tank mode) | ≤5 min (RT to −65°C or RT to +150°C) |
| Temperature Uniformity | ±2.00°C |
| Internal Chamber Material | SUS#304 Stainless Steel |
| Refrigeration System | Dual-stage cascade refrigeration with eco-friendly refrigerant |
| Control System | OYO-8226 PID controller with 320×240 LCD interface |
| Programmable Cycles | Up to 9999 cycles |
| Data Interface | RS-232 with PC software support |
| Power Supply | AC 3φ 380 V, 50 Hz |
| Cooling Method | Water-cooled |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | YL-DL-5000A |
| Short-Circuit Current | 5000 A |
| Enclosure Internal Dimensions | W1000 × H1000 × D1000 mm |
| External Dimensions | Approx. W1180 × H1680 × D1360 mm |
| Enclosure Construction | Integrated steel frame with control console |
| Outer Casing Material | Thickened cold-rolled steel (gray + blue powder coating) |
| Inner Chamber Material | Thickened stainless steel |
| Observation Window | Dual-layer tempered explosion-proof glass (350 × 400 mm) |
| Lighting | LED interior lighting |
| Ventilation | Forced-air exhaust system |
| Pressure Relief | Automatic pressure-relief port |
| Short-Circuit Mechanism | Vacuum arc interruption + high-current DC contactor |
| Contact Resistance | <5 mΩ (standard), configurable up to ≤20 mΩ |
| Mechanical Life | ≥500,000 cycles |
| Ambient Operating Temperature | Room temperature |
| Control Interface | PC-based software platform |
| Data Acquisition Channels | 5-channel synchronized sampling |
| Measured Parameters | Current (0–5000 A), Voltage (0–36 V), Temperature (0–1200 °C) |
| Measurement Accuracy | ±0.5% FS (current/voltage), ±1 °C (temperature) |
| Sampling Rate | ≥30 Hz per channel |
| Resolution | 0.01 A, 0.1 V, 0.1 °C |
| Data Export | CSV, Excel, and secure upload capability (customizable) |
| Optional Features | HD in-chamber video monitoring, integrated fire suppression, smoke extraction, real-time multi-parameter curve overlay (I-V-T-t) |
| Safety Protections | Leakage current detection, overtemperature cutoff, overvoltage/overcurrent shutdown, acoustic-optical alarm |
| Power Supply | AC 220 V / 380 V, 50 Hz |
| Brand | Yuhantest |
|---|---|
| Origin | Shanghai, China |
| Model | YH-FB4B |
| Max Load Capacity | 50 kN |
| Load Accuracy | ±0.5% of full scale |
| Effective Stroke | 800 mm |
| Test Width Range | 370–1000 mm (customizable) |
| Speed Range | 0.001–500 mm/min |
| Torque Measurement Range | 500 N·m |
| Max Torque Output | 5000 N·m |
| Torque Resolution | 1/300,000 full scale |
| Torsion Angle Range | 0–180° |
| Motor Power | 1500 W |
| Drive System | Panasonic servo motor + TBI ball screw |
| Control Interface | Color touchscreen + PC-based software with dual-mode operation |
| Brand | Yuntang |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Model | YT-321 |
| Price | USD 170 (FOB) |
| Measurement Principle | Pulse-Echo Ultrasonic |
| Range (Steel) | 0.75–350 mm |
| Standard Probe Range | 1–250 mm |
| Resolution | 0.1 mm |
| Sound Velocity Adjustment | 1000–9999 m/s |
| Operating Temp. | −10 to +60 °C |
| Accuracy | ±(1% H + 0.1) mm (H = actual thickness) |
| Power | Two AAA alkaline batteries |
| Battery Life | ~200 hours |
| Dimensions | 130 × 70 × 25 mm |
| Weight | 0.2 kg (instrument only) |
| Display | High-brightness LED backlight |
| Compliance | Designed per ISO 2400:2019 (Ultrasonic thickness measurement — Calibration and verification procedures) |
| Brand | Yuntang |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YT-600A |
| Measurement Range | 2–500 mN/m |
| Accuracy | ±0.4 mN/m |
| Sensitivity | 0.1 mN/m |
| Detection Method | Du Noüy Ring Method |
| Power Supply | AC 220 V ±5%, 50 Hz ±2.5% |
| Power Consumption | 50 W |
| Operating Temperature | 5–40 °C |
| Relative Humidity | ≤85% |
| Temperature Control | PID Auto-Tuning |
| Sample Capacity | 3 positions |
| Display | High-Resolution Color Touchscreen |
| Data Output | Auto-printing & Real-time Dynamic Tension Curve Visualization |
| Calibration | Single-Point Calibration Protocol |
| Brand | Yuntang |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YT-610 |
| Magnetization Modes | AC Circumferential (0–2000 A, continuously adjustable with phase-controlled power-off) |
| Longitudinal Magnetization Force | AC 0–24,000 AT, continuously adjustable with phase-controlled power-off |
| Magnetization Configurations | Circumferential, Longitudinal, or Composite |
| Powder Application Method | Dry Powder |
| Demagnetization Residual Field | ≤0.2 mT |
| Inspection Cycle Time | 6 seconds per component |
| Continuous Operating Duration | >4 hours |
| Structural Design | Hand-Carried Yoke Configuration |
| Primary Application Sector | Rail Transportation Infrastructure |
| Brand | Yuntang |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | YT-610C |
| Magnetization Modes | Circumferential (AC 0–2000 A, phase-controlled cutoff), Longitudinal (AC 0–24,000 AT, phase-controlled cutoff), Composite |
| Configuration | Portable, Handheld Yoke System |
| Magnetization Method | Dry Powder MPI |
| Circumferential Magnetizing Current | AC 0–2000 A, continuously adjustable with phase-angle control for precise demagnetization timing |
| Longitudinal Magnetomotive Force | AC 0–24,000 AT, continuously adjustable with phase-angle control |
| Inspection Cycle Time | ≤6 seconds per component |
| Residual Field After Demagnetization | ≤0.2 mT |
| Continuous Operating Duration | >4 hours |
| Input Voltage | AC 220 V ±10% |
| Output Voltage | AC 36 V (safety-isolated) |
| Output Current | >10 A |
| Lifting Power | ≥5 kg (AC), ≥18 kg (DC for optional probes) |
| Duty Cycle | 50% |
| Sensitivity Verification | Clear indication of ASTM E1444-compliant A1-30/100 shim test piece |
| Dimensions (H×W×D) | 230 × 160 × 120 mm |
| Weight | 5 kg |
| Probe Compatibility | Standard A-type yoke (adjustable pole spacing 0–250 mm), optional E-type (cross-yoke), D-type (high-lift yoke), O-type (circular coil, Φ150 mm, 1800 TA) |
| Brand | Yuntang |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | Domestic (China) |
| Model | YT-610C |
| Magnetization Modes | Circumferential (AC 0–2000 A, phase-controlled cutoff), Longitudinal (AC 0–24,000 AT, phase-controlled cutoff), Composite |
| Inspection Cycle Time | ≤6 s per part |
| Residual Field After Demagnetization | ≤0.2 mT |
| Continuous Operating Duration | >4 h |
| Input Voltage | AC 220 V ±10% |
| Output Voltage | AC 36 V |
| Output Current | >10 A |
| Lifting Force | ≥5 kgf |
| Duty Cycle | 50% |
| Sensitivity | Clear indication of ASTM E1444/E709 A1-30/100 shims |
| Probe Configurations | Electromagnetic Yoke (adjustable pole spacing: 0–250 mm), Horseshoe Probe (0–160 mm), Circular Coil (Φ150 mm, 1800 TA) |
| Dimensions (L×H×W) | 230×160×120 mm |
| Weight | 5 kg |
| Brand | Yuntang |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | YT-JNY |
| Price | USD 3,650 (approx.) |
| Measurement Range | 20–88 (arbitrary hardness units, calibrated per USP <1049> and Ph. Eur. 2.9.40 compliant soft capsule indentation scale) |
| Load Capacity Options | 50 N, 100 N, 500 N, or 1000 N |
| Resolution | 0.1 N |
| Accuracy | ±0.5% FS |
| Test Speed | 1–300 mm/min |
| Probe | Cylindrical, Ø10 mm or 10 mm² contact area |
| Upper Platen Parallelism | <0.025 mm |
| Lower Platen Diameter | 120 mm |
| Dimensions (W×D×H) | ~450 × 450 × 650 mm |
| Weight | 45 kg |
| Power Supply | 220 V, 50 Hz |
| Brand | Yuntang |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | YT-TCD-101 |
| Temperature Range | Ambient to 1150 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Stability | ±0.1 °C |
| Heating Rate | 1–80 °C/min |
| Cooling Time | 15 min (from 1000 °C to 100 °C) |
| Balance Capacity | 1 mg–2 g (extendable to 30 g) |
| Balance Resolution | 0.1 µg |
| Isothermal Hold Duration | 0–300 min (user-configurable) |
| Atmosphere Control | Dual-gas inlet with mass flow control (inert, oxidizing, reducing, static, dynamic) |
| Data Interface | RS-232 |
| Software | Integrated TGA analysis suite with automated curve recording, baseline correction, derivative (DTG) calculation, kinetic modeling (e.g., Kissinger, Ozawa), and GLP-compliant reporting |
| Power Supply | AC 220 V, 50 Hz |
| Brand | Yuntang |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | OEM Manufacturer |
| Model | YT-UC750 |
| Measurement Range | 0.15–300 mm (steel) |
| Resolution | 0.001 mm (0.15–100 mm), 0.01 mm (100–300 mm) |
| Display | 128×64 LCD with LED backlight |
| Accuracy | ±0.005 mm (<5 mm), ±0.01 mm (5–20 mm), ±0.1 mm (20–300 mm) |
| Sound Velocity Range | 1000–9999 m/s |
| Operating Temperature | –10°C to +50°C (optional –20°C) |
| Power Supply | 2 × AA 1.5 V alkaline batteries (up to 200 h operation without backlight) |
| Auto-Shutdown | After 5 min inactivity |
| Data Storage | 500 readings |
| Probe Types | Single-crystal (e.g., 15 MHz), dual-element (5 MHz, 7 MHz), optional 4 mm single-crystal, 2 MHz high-penetration, and 7 MHz small-diameter probes |
| Coating-Tolerant Mode | Yes (echo-to-echo & pulse-echo) |
| Calibration Modes | Zero calibration on test block, sound velocity inversion (reverse calibration), single-point calibration |
| Units | mm / inch switchable |
| Alarms & Delta Mode | Configurable |
| Dimensions | 153 × 67 × 26 mm |
| Weight | 220 g |
| Brand | YXLON |
|---|---|
| Origin | Germany |
| Model | FF65 CL |
| Detector Type | Image Intensifier-Based Laminography Detector |
| Sample Diameter | 795 mm |
| Sample Height | 20 mm |
| Max Sample Weight | 2 kg |
| System Dimensions | 1760 × 2000 × 2000 mm |
| CT Mode | Super-High-Resolution Computed Laminography (CL) |
| Manipulation | Super-Precise Manipulator with Active Anti-Vibration System |
| Vacuum Sample Hold Mechanism | Integrated |
| Effective Detection Area | 510 × 610 mm |
| X-ray Source | Next-Generation Nanofocus Tube (≤ 300 nm focal spot) |
| Brand | YXLON |
|---|---|
| Origin | Germany |
| Model | FF70 CL |
| Detector Type | High-Sensitivity Image Intensifier with Nano-Focus X-ray Source |
| Max. Sample Diameter | 795 mm |
| Max. Sample Height | 150 mm |
| Max. Sample Weight | 2 kg |
| System Dimensions (W×D×H) | 1940 × 2605 × 2000 mm |
| CT Mode | Ultra-High-Resolution Computed Laminography (CL) |
| Manipulation | Ultra-Precise Active Anti-Vibration Manipulator |
| Minimum Resolvable Feature Size | <150 nm |
| Inspection Area | 510 × 610 mm |
| Brand | ZEDO |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZD-180D Steam Condensation & Fog Removal Unit |
| Instrument Type | Static Vapor Adsorption System |
| Temperature Range | 5–55 °C |
| Humidity Range | 10–99 % RH |
| Humidity Accuracy | ±5 % RH |
| Brand | Zehntner |
|---|---|
| Origin | Switzerland |
| Model | ZMM5000 |
| Measurement Range | ±12.5 mm |
| Resolution | 0.01 mm |
| Body Material | Anodized Aluminum |
| Dimensions | 180 × 70 × 76 mm |
| Weight | 880 g |
| Compliance | EN 13197, EN 13212 |
| Optional Accessories | Measuring Bridge, Thermal Printer, Unit Conversion Display Module |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ZSH2090 |
| Price | Upon Request |
| Body Material | Stainless Steel |
| Dimensions (L×W×H) | 102 × 92 × 55 mm |
| Weight | 2.2 kg |
| Standards Compliance | ASTM D3363, ECCA T4, MIL-C-27227, NEN 5350, SIS 184187, SNV 37113 |
| Warranty | 24 months |
| Standard Kit | 1× tester unit, 1 set of 17 graded pencils (6B to 9H), 1× 400-grit abrasive paper, 1× carrying case |
| Optional Accessories | Pencil sharpener, replacement sandpaper, additional pencil sets |
| Manufacturer | Zehntner AG, Switzerland |
| Brand | Zehntner |
|---|---|
| Origin | Switzerland |
| Model | ZVL2190 |
| Compliance | DIN EN ISO 17872 |
| Cutting Tip Material | Tungsten Carbide |
| Overall Length | 150.50 mm |
| Diameter | Φ13.65 mm |
| Weight | 131 g |
| Warranty | 12 months |
| Brand | ZEISS |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Origin Category | Domestic |
| Model | BOSELLO MAX |
| Quotation | Upon Request |
| Detector Type | Flat-Panel Detector (FPD) |
| Scan Mode | Translation-Rotation (TR) |
| Inspection Volume | 1700 × 1700 × 2200 mm to 2600 × 2600 × 2600 mm |
| Sample Weight Capacity | 80 – 250 kg |
| Brand | ZEPTOOLS |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Origin Category | Domestic (China) |
| Model | SEM Cryogenic Vacuum Transfer System |
| Pricing | Upon Request |
| Cooling Stage Temperature Range | −170 °C to +100 °C |
| Cooling Stage Temperature Stability | ≤ ±0.1 °C |
| Cooling Stage Rotation | 0–360° continuous |
| Cooling Stage Tilt Angle | ≥55° |
| Cold Trap Temperature | ≤ −190 °C |
| Cold Trap Temperature Stability | ≤ ±0.5 °C |
| Cooling Stage Cool-down Time to −170 °C | ≤35 min |
| Cold Trap Cool-down Time to −190 °C | ≤20 min |
| Bake-out Capability | ≥100 °C |
| Liquid Nitrogen Capacity | 35 L |
| Continuous Operation Duration | >8 h |
| LN₂ Refill Port | Hot-swap compatible (no system shutdown required) |
| Vacuum Transfer Chamber | Enables glovebox ↔ FIB ↔ SEM cryo-transfer |
| Vacuum Load Lock | Integrated for rapid, contamination-controlled SEM insertion |
| Control System | Integrated PLC-based HMI with real-time temperature/vacuum monitoring and logging |
| Origin | USA |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Zeta-Meter 4.0+ |
| Price Range | USD 1,400–7,000 (est.) |
| Zeta Potential Range | ±125 mV |
| pH Range | 0–12 |
| Operating Temperature Range | 5–75 °C |
| pH Resolution | 0.1 unit |
| Temperature Resolution | 0.1 °C |
| Accuracy | ±1% of reading |
| Repeatability | ±0.5% of reading |
| Electrophoretic Mobility Range | ±20 µm·s⁻¹·V⁻¹·cm |
| Conductivity Range | 0–60,000 µS/cm |
| Sample Volume | 5 mL or 20 mL |
| Particle Size Range | 0.5–100 µm |
| Compatible Dispersants | Aqueous and organic solvents |
| Solid Concentration Range | 0.001–80 wt% |