Alalis AS10 Touchscreen Ultrasonic Cleaner

Overview

The Alalis AS10 Touchscreen Ultrasonic Cleaner is an entry-level yet robust benchtop ultrasonic cleaning system engineered for precision cleaning of delicate and complex components in regulated laboratory, biomedical, and industrial quality control environments. It operates on the principle of acoustic cavitation—generating high-frequency (40 kHz) pressure waves in liquid media that produce microscopic vacuum bubbles; upon collapse, these bubbles release localized energy sufficient to dislodge particulate, organic, and oily contaminants from surfaces without mechanical abrasion or thermal degradation. Designed for reproducible, non-destructive cleaning of parts with recesses, blind holes, microchannels, and intricate geometries—including glassware, surgical instruments, optical lenses, semiconductor wafers, and analytical sample holders—the AS10 delivers consistent performance across variable ambient conditions. Its sealed 304 stainless steel tank, corrosion-resistant housing, and integrated safety architecture make it suitable for routine use in GLP-compliant laboratories, university research facilities, and clinical sterilization support workflows.

Key Features

• Capacitive touchscreen interface with intuitive icon-driven navigation and real-time status feedback—no physical buttons to degrade or accumulate residue.
• Adjustable ultrasonic output (40–100% of 200 W nominal power) via pulse-width modulation (PWM), enabling optimization for sensitive substrates or heavily soiled loads.
• Persistent parameter memory: All user-defined settings—including timer duration and power level—are retained following unexpected power interruption, eliminating reconfiguration delays.
• Dual-layer safety design: Active leak detection circuitry halts operation upon sensing tank integrity compromise; redundant thermal cutoffs prevent overheating during extended cycles.
• Integrated drain valve with quick-connect fitting allows rapid, spill-free fluid evacuation—critical for solvent recovery, multi-step cleaning protocols, or aqueous-to-alcoholic transition sequences.
• Vibration-damped rubber feet ensure stable placement on laminar flow hoods, analytical balance tables, or shared lab benches without resonance-induced measurement interference.
• Self-diagnostic firmware continuously monitors transducer impedance, supply voltage, and thermal sensor readings—displaying fault codes for traceable maintenance logging.

Sample Compatibility & Compliance

The AS10 accommodates standard laboratory vessels up to 300 × 240 × 150 mm (L×W×H), supporting beakers, crucibles, filter housings, and custom fixtures. Its 40 kHz frequency balances penetration depth and surface cleaning efficiency—ideal for particles >1 µm and biofilm removal per ISO 15883-5 Annex C guidelines. The unit conforms to electrical safety requirements under UL 61010-1 and IEC 61010-1; its non-heating configuration complies with ASTM D2607–18 for solvent-based ultrasonic cleaning validation. While not certified for sterile processing per ISO 17664, it supports pre-sterilization cleaning steps aligned with FDA QSR 21 CFR Part 820 and EU MDR Annex I §11.6. Documentation includes factory calibration certificates traceable to NIST standards.

Software & Data Management

The AS10 employs a proprietary embedded microcontroller platform with no external PC dependency. All operational parameters are stored in non-volatile flash memory, supporting audit-ready recordkeeping when paired with lab notebook documentation. Though lacking network connectivity or electronic signature capability, its deterministic behavior—repeatable cycle execution within ±1.5% time accuracy and ±3% power linearity—meets baseline data integrity expectations for SOP-driven environments. Optional RS-232 output (available on AS10T variant) enables timestamped event logging into LIMS or ELN platforms compliant with 21 CFR Part 11 Annex A for electronic records.

Applications

• Cleaning chromatography vials, HPLC columns, and autosampler needles prior to trace-level analysis.
• Removing polishing compounds and residual adhesives from optical components in metrology labs.
• Decontaminating reusable pipette tips and electrophoresis combs in molecular biology workflows.
• Preparatory cleaning of metal and ceramic substrates before SEM/EDS analysis or thin-film deposition.
• Routine maintenance of dental handpieces and endoscopic accessories in hospital central sterile supply departments (CSSD).
• Supporting ASTM E2912–21 verification of cleaning efficacy for medical device manufacturing validation protocols.

FAQ

Does the AS10 include a heater or temperature control function?
No. The AS10 is a non-heating ultrasonic cleaner. Temperature-sensitive applications require external water baths or heated rinse stations.
Is the unit compatible with flammable solvents such as acetone or ethanol?
Only when used in fully ventilated fume hoods with explosion-proof electrical infrastructure. The AS10 lacks ATEX or Class I Division 1 certification.
Can the touch screen be calibrated if responsiveness degrades over time?
Yes—calibration is accessible via hidden service menu using a three-finger press-and-hold sequence for 5 seconds.
What is the expected transducer service life under continuous daily operation?
Rated for ≥10,000 hours at 80% power setting, assuming proper degassing prior to each cycle and avoidance of dry-running.
Does Alalis provide IQ/OQ documentation packages for GMP environments?
Standard units ship with Factory Acceptance Test (FAT) reports. Custom IQ/OQ protocol development and on-site execution are available through authorized service partners under separate agreement.