HAIDA HD-M006 Cookware Handle Bending Resistance Tester

Overview

The HAIDA HD-M006 Cookware Handle Bending Resistance Tester is an engineered mechanical testing system designed to evaluate the structural integrity of handle-to-body junctions in domestic and commercial cookware. It applies a controlled, static or quasi-static bending load—up to 100 N—at standardized test points defined by international cookware safety and durability standards. The instrument operates on a lever-arm and calibrated load-cell principle, ensuring repeatable force application perpendicular to the handle axis while monitoring for visible deformation, joint separation, weld fracture, rivet pull-out, or permanent set exceeding specified thresholds. This device supports compliance verification for both OEM quality assurance protocols and third-party certification laboratories conducting physical safety assessments under regulatory frameworks governing consumer kitchen appliances.

Key Features

• Fixed-load application system delivering precise 100 N bending force at designated handle attachment points, traceable to national metrological standards
• Modular fixture base with adjustable clamping jaws accommodating flat, curved, and tubular handle geometries (diameter range: 12–45 mm)
• Robust steel frame construction with anti-vibration damping feet, rated for continuous operation in QC lab environments
• Manual mechanical actuation with dual-scale force indication (analog dial + digital readout optional via add-on sensor module)
• Compliance-ready design aligned with mechanical loading sequences specified in ISO 18117:2019 (Cookware — Safety and performance requirements) and GB/T 32095.2–2015 (Domestic cookware — Part 2: Test methods)
• No electrical power requirement for core functionality—ideal for cleanroom-adjacent or explosion-proof zones where electromagnetic interference must be minimized

Sample Compatibility & Compliance

The HD-M006 accommodates a broad spectrum of cookware handle configurations, including cast aluminum, stainless steel, phenolic resin, silicone-overmolded, and bakelite-composite handles mounted via riveting, spot welding, laser welding, or threaded inserts. Test specimens include frying pans, saucepans, stockpots, woks, and Dutch ovens with nominal diameters from 16 cm to 36 cm. The tester satisfies mechanical test requirements referenced in ASTM F2852–22 (Standard Specification for Cookware Handles), EN 12981:2021 (Household cookware — Requirements and test methods), and JIS S2024:2018 (Cooking utensils — Safety requirements). All test procedures are fully documentable for GLP-aligned audits, and fixture calibration records support ISO/IEC 17025 accreditation pathways.

Software & Data Management

While the base HD-M006 operates as a manual mechanical tester, optional digital instrumentation modules integrate with HAIDA’s proprietary TestMaster Lite software (v3.2+), enabling force-time curve capture, pass/fail threshold tagging, automatic report generation in PDF/CSV formats, and audit-trail logging compliant with FDA 21 CFR Part 11 Annex 11 principles. Data export supports traceability to individual batch IDs, operator credentials, environmental conditions (recorded manually or via optional ambient sensor input), and calibration certificate numbers. All software modules undergo annual validation per ICH Q9 and ISO 13485 Annex A guidelines for regulated laboratory use.

Applications

• Pre-production validation of handle joint designs during new product development (NPD) cycles
• In-process quality control on assembly lines manufacturing stainless steel or enameled cookware
• Supplier qualification testing for third-party handle component vendors
• Regulatory submission testing for CE marking, CCC certification, and North American UL/CSA evaluations
• Root cause analysis of field failures involving handle detachment or plastic deformation under thermal cycling
• Inter-laboratory proficiency testing within national metrology institutes and regional food contact materials testing networks

FAQ

What standards does the HD-M006 directly support?
It is configured to execute test sequences mandated by ISO 18117, GB/T 32095.2, ASTM F2852, EN 12981, and JIS S2024—with fixture geometry and load application points pre-validated against those documents.
Can the HD-M006 test non-metallic handles such as silicone or wood composites?
Yes—the clamping system accommodates heterogeneous materials; however, test interpretation must follow material-specific deformation criteria outlined in CY/T 229–2020 and ISO 22325:2021 (Ergonomics of human-system interaction).

Is calibration certification included with shipment?
Each unit ships with a factory calibration certificate traceable to CNAS-accredited reference standards; annual recalibration services are available through HAIDA’s ISO/IEC 17025-certified metrology lab.

Does the HD-M006 require compressed air or electrical supply?
No—core operation is purely mechanical. Optional digital modules require 24 V DC input, supplied via included switching adapter.

How is sample alignment verified before testing?
The base plate features engraved alignment guides and a removable reference template matching common handle pitch dimensions (e.g., 75 mm, 90 mm, 105 mm center-to-center), ensuring consistent load vector orientation across test runs.