- All
- Favorite
- Popular
- Most rated
| Brand | Buehler |
|---|---|
| Origin | USA |
| Model | AbrasiMet XL Pro |
| Motor Power | 10 kW (13.4 HP) |
| Voltage | 380–480 VAC, 3-phase, 50/60 Hz |
| Max Current | 25 A @ 460 VAC |
| Blade Sizes | 356 mm (14″), 406 mm (16″), 457 mm (18″) |
| Max Sample Diameter | 178 mm (7″) |
| Blade Speeds | 1860–2100 rpm |
| Axes of Motion | X, Y, Z |
| T-Slot Table Dimensions | 247 × 221 × 196 mm (9.71″ × 8.71″ × 7.71″) |
| Max Sample Length | 1245 mm (49″) |
| Coolant Reservoir Capacity | 170 L (45 gal) |
| Safety Compliance | CE, Smart Cut™ Intelligent Cutting Logic, Dual-Hand Operation Interlock, Emergency Stop, Door-Interlocked Motor Disable |
| Illumination | Four High-Output LEDs + Class 2 Green Laser (520 nm) |
| Filtration | Fixed-Mesh Auxiliary Filter Box with Chip Collection |
| Control Interface | Touchscreen HMI with Programmable Cutting Protocols |
| Brand | Buehler |
|---|---|
| Origin | USA |
| Model | PlanarMet™ 300 |
| Dimensions (L×W×D) | 539 mm × 787 mm × 755 mm |
| Grinding Wheel Count | 1 |
| Wheel Diameter | 305 mm (12 in) |
| Wheel Speed | 1600 rpm |
| Z-axis Depth Control Resolution | 0.01 mm |
| Programmable Grinding Depth Range | 0.1–3.0 mm (0.1 mm increments) |
| Downforce Range | 40–445 N (10–100 lbf, 20 N / 5 lbf steps) |
| Head Rotation Speed | 60–150 rpm (10 rpm increments) |
| Head Rotation Direction | CW/CCW |
| Wheel Rotation Direction | CCW |
| Automatic Wheel Dressing System | Yes |
| Dressing Depth Range | 10–50 µm (5 µm increments) |
| Dressing Interval | 10 s – 10 min |
| Motor Power | 5.7 HP (base) + 0.7 HP (head), Total 5.6 kW |
| Electrical Supply | Integrated 10-pin interface |
| Operating Temperature | 5–40 °C (non-condensing), Humidity: 30–90 % RH |
| Noise Level | 71 dB(A) |
| Coolant Reservoir Options | 45 L or 83 L |
| Water Manifold | Integrated continuous flow system |
| Fixturing Max Diameter | 184 mm (7.2 in) |
| Mounting Thread | M8 |
| Tooling Wrench | 5 mm hex |
| Brand | Buehler |
|---|---|
| Origin | USA |
| Model | AutoMet™ 300 Pro |
| Grinding Disc Diameter | 10 in (254 mm) or 12 in (305 mm) |
| Disc Speed | 50–400 rpm (10 rpm increments) |
| Motor Power (Base) | 2 HP (1500 W) |
| Motor Power (Head) | 0.75 HP (560 W) |
| Center Load Range | 10–120 lbf (40–535 N) |
| Single-Point Load Range | 1–20 lbf (5–90 N) |
| Touchscreen Display | 7-inch full-color LCD, NEMA 4 / IP65 rated |
| Water Supply | 0.25 in (6 mm) OD tubing, 40–100 psi (2.8–6.9 bar) |
| Compressed Air | 0.25 in (6 mm) OD tubing, 35 psi (2.4 bar) |
| Noise Level (Base only, 0.5 m, 100 rpm) | 51.5 dB(A) |
| Weight (Base + Head) | 219 lbs (99 kg) |
| Compliance | CE-marked per EU Machinery Directive 2006/42/EC and EMC Directive 2014/30/EU |
| Brand | Wilson Hardness |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | Wilson DiaMet |
| Instrument Type | Vickers Hardness Tester |
| Hardness Scales Supported | Vickers, Knoop, Brinell (hardware-dependent) |
| Compatible Hardware | Wilson VH3100, Wilson VH3300 (introduced 2015) |
| Focus Mode | Auto-focus with manual override |
| Illumination Control | Automatic and manual adjustment |
| Measurement Modes | Manual or fully automated indentation analysis |
| Specimen Stage Control | Automated positioning for CHD, line, circle, matrix, and custom multi-sample protocols |
| Multi-Specimen Capability | Yes, concurrent testing of multiple specimens |
| Panoramic Imaging | Supported only with panoramic objective lens |
| Data Export Formats | Printer, PDF, Excel |
| Touch Interface | Optimized capacitive touchscreen UI |
| Brand | Buehler |
|---|---|
| Origin | USA |
| Model | VibroMet™ 2 |
| Dimensions (L×W×D) | 546 × 584 × 368 mm |
| Polishing Plate Count | 1 |
| Polishing Plate Diameter | 305 mm (12 in) |
| Vibration Frequency | Up to 7200 rpm |
| Power Supply | 115/220 V, 50/60 Hz, Single Phase |
| Brand | Wilson Hardness |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | VH1102 / VH1202 |
| Price Range | USD $25,000 – $100,000 |
| Instrument Type | Vickers/Knoop Microhardness Tester |
| Measurement Range | HV 0.01–HV 2 / HK 0.01–HK 2 |
| Total Test Load | 0.01–2 kgf (10–2000 gf) |
| Specimen Height Clearance | 95 mm |
| Depth Clearance | 175 mm |
| Turret Positions | 4-position (VH1102) / 6-position (VH1202) |
| Objective Lenses | 5×, 10×, 50×, optional 100× (up to 1000× total magnification) |
| Display | 7″ color touchscreen LCD with USB interface |
| Load Selection | 9 pre-programmed automatic load steps |
| Compliance | ISO 6507-1, ASTM E384, ASTM E92 |
| Brand | Buehler |
|---|---|
| Origin | USA |
| Model | AbrasiMet L Pro |
| Instrument Type | Abrasive Cutting Machine |
| Cutting Wheel Sizes | 10 in (254 mm), 12 in (305 mm), 14 in (356 mm), 16 in (406 mm) |
| Max. Sample Length | 26 in (660 mm) |
| Z-Axis Travel | 8.7 in (220 mm) |
| Y-Axis Travel | 9.8 in (250 mm) |
| X-Axis Travel | 11.8 in (300 mm) |
| Motor Power Options | 4 kW or 7 kW |
| Rated Voltage | 200–240 VAC / 380–460 VAC, 3-phase, 50/60 Hz |
| Weight | 430 kg (benchtop) or 645 kg (floor-standing) |
| Coolant Reservoir Capacity | 130 L |
| Display | 10.5 in LED-backlit LCD touchscreen |
| Safety | Dual-hand operation, interlocked door, emergency stop, overtravel limit protection |
| Brand | Buehler |
|---|---|
| Origin | USA |
| Model | EcoMet 30 Manual/Auto Grinder-Polisher |
| Grinding/Polishing Discs | 1 or 2 |
| Disc Diameter | 8 in (203 mm), 10 in (254 mm), 12 in (305 mm) |
| Speed Range | 50–500 rpm (infinitely variable for manual |
| Power Supply | 100–240 VAC, 50/60 Hz, single-phase |
| Motor Power | 300 W (manual base), 440 W (auto base), 300 W (auto head) |
| Water Pressure | 40–116 psi (2.7–8 bar) |
| Center Load Force | 5–40 lbf (25–200 N) |
| Single-Point Load Force | 1–10 lbf (5–40 N) |
| Head Speed | 30–200 rpm (10 rpm increments) |
| Touchscreen | 7-inch full-color LCD (auto only) |
| Noise Level | ≤65 dB(A) at 500 rpm |
| Weight | 46 kg (single manual), 70 kg (dual manual), 75 kg (single auto), 105 kg (dual auto) |
| Compliance | CE |
| Brand | Wilson Hardness |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | BH3000 |
| Price Range | USD 42,000 – 84,000 (FOB) |
| Instrument Type | Brinell Hardness Tester |
| Hardness Range | HBW 10–100 |
| Total Test Force | 62.5–3000 kgf |
| Test Space | 280 mm (H) × 130 mm (D) |
| Indenter Options | 2.5 mm, 5 mm, 10 mm tungsten carbide balls |
| Dwell Time | 2–99 s |
| Optical System | External digital measurement microscope (20×/40×/60× magnification |
| resolution | 12.5–50.0 µm |
| max measurable indentation diameter | 2–7 mm) |
| Display Resolution | 0.1 HBW (HBW < 100), 1.0 HBW (HBW ≥ 100) |
| Compliance | ISO 6506-1:2014, ASTM E10-23, JIS Z 2243:2019 |
| Data Interface | RS-232 serial port |
| Optional Output | Built-in thermal printer |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Net Weight | 250 kg |
| Dimensions (W×D×H) | 265 × 608 × 1000 mm |
| Brand | BUEHLER |
|---|---|
| Origin | USA |
| Model | Delta™ Manual Action Cutter |
| Motor Power | 10 HP (7.5 kW) |
| Cutting Wheel Diameter | 14" (355 mm) |
| Max Cutting Capacity | 5" (127 mm) |
| Handle Travel | 42" (106 cm) |
| Certification | CE |
| Construction | Stainless Steel Base, Fiberglass Enclosure |
| Cooling | Recirculating Coolant System |
| Safety | Interlocked Guard with Motor-Activated Lock, Overcurrent Protection |
| Lighting | Fluorescent Task Light |
| Brand | Buehler |
|---|---|
| Origin | USA |
| Model | AbrasiMatic™ 300 |
| Cutting Wheel Diameter | Up to 305 mm (12") |
| Max Sample Diameter | 110 mm (4.375") |
| Z-Axis Travel | 150 mm |
| Y-Axis Travel | 260 mm |
| X-Axis Travel | 70 mm |
| Motor Power | 3.7 kW (5 HP) |
| Rotational Speed | 2600 rpm |
| Peripheral Speed | 2700 m/min |
| Touchscreen Interface | 7" LCD, 320×240 px, NEMA 4/IP65 rated |
| Worktable | 365 × 254 mm with 12 mm T-slots |
| Coolant Tank Capacity | 83 L (22 gal) |
| Input Voltage Options | 220–460 VAC, 3-phase, 50/60 Hz |
| Brand | Wilson Hardness |
|---|---|
| Origin | USA |
| Manufacturer | Wilson Instruments (A Division of ITW) |
| Model | VH1150 |
| Hardness Scale | Vickers (HV) and Knoop (HK) |
| Load Range | 0.3–50 kgf (2.94–490.3 N) |
| Test Force Accuracy | ±0.5% of full scale per ASTM E10 and ISO 6507-2 |
| Indentation Measurement Resolution | 0.1 µm |
| Optical Magnification | 10×, 20×, 50×, 100× (optional) |
| Test Height Clearance | 210 mm (H) × 160 mm (D) |
| Turret | 5-position automatic revolver (4 objective positions + 1 indenter position) |
| Display | 7″ capacitive touchscreen with Smart UI interface |
| Data Output | USB 2.0 port |
| Compliance | ASTM E92, ASTM E384, ISO 6507-1/2/3/4, JIS Z2244, GB/T 4340.1–4340.4 |
| Hardness Conversion | Integrated HV/HK ↔ HRB/HRC/HBW/UTS per ASTM E140 and ISO 18265 |
| Brand | Wilson Hardness |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Product Origin | Domestic (China) |
| Model | Rockwell 574 |
| Price Range | USD 28,000 – 42,500 |
| Instrument Type | Rockwell Hardness Tester |
| Hardness Scale Range | HR 10–100 |
| Total Test Force | 3–150 kgf |
| Maximum Specimen Height | 289 mm (H) × 155 mm (D) |
| Brand | Buehler |
|---|---|
| Origin | USA |
| Model | SimpliVac |
| Type | Cold-Mount Vacuum Impregnation System |
| Max Vacuum Level | –92 kPa (–27.1 inHg) |
| Vacuum Chamber Diameter | 240 mm (9.4 in) |
| Dimensions (H×D×W) | 325 × 488 × 472 mm (12.8 × 19.2 × 18.6 in) |
| Weight | 23 kg (51 lbs) |
| Power Supply | 100–240 VAC, 50–60 Hz, Single Phase |
| Max Power Consumption | 25 W |
| Compressed Air Requirement | ≥0.6 MPa |
| Sample Capacity | Up to 14 specimens (30 mm diameter molds) |
| Control Interface | Touchscreen with real-time vacuum level, cycle count, and timer display |
| Brand | Buehler |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | PetroThin™ Thin Sectioning System |
| Instrument Type | Precision Cutting Machine |
| Motor Power | 1/3 HP (250 W) |
| Blade Diameter | 8 in (203 mm) |
| Cutting Speed | 220 rpm (38-1450-220 model) / 2100 rpm (38-1450-250 model) |
| Positioning Accuracy | ±5 µm |
| Voltage/Frequency | 115 VAC @ 60 Hz or 220 VAC @ 50 Hz, Single Phase |
| Compliance | CE Marked |
| Vacuum Fixture Capacity | Up to six standard microscope slides (various sizes) |
| Included Fixture | 10-3533 Rock Holder |
| Brand | Buehler |
|---|---|
| Origin | USA |
| Model | IsoMet HS |
| Instrument Type | Precision Cutting Machine |
| Motor Power | 2.68 HP (2 kW) |
| Input Voltage | 100–240 VAC, 50–60 Hz, Single Phase |
| Blade Travel Axes | Horizontal & Linear (X, Y) |
| Horizontal Position Range | 0–2 in (0–50 mm) |
| Feed Rate Range | 0.04–1 in/min (1.2–25.4 mm/min) |
| Feed Increment | 0.01 in (0.25 mm) |
| Blade Speed | 200–5000 rpm |
| Cut Length Range | 0.01–7.5 in (0.25–190 mm) |
| Cut Length Increment | 0.01 in (0.25 mm) |
| Display | 6.5″ LCD with LED backlight |
| Control Interface | Touchscreen + Precision Motion Controller |
| Cooling System | Integrated recirculating reservoir (4 L capacity) |
| Coolant Flow Rate (in tubing) | 2 L/min |
| Coolant Flow Rate (at blade) | 2.5 L/min |
| Illumination | Adjustable-intensity dual-LED light strips |
| Optional | Green alignment laser |
| Continuous Cutting Mode | Yes |
| Thin-Section Blade Diameter | 3–8 in (75–200 mm) |
| Abrasive Wheel Diameter | 5–8 in (125–200 mm) |
| Arbor Size | 0.5 in |
| Cutting Chamber Dimensions | 9 in × 20 in (228 mm × 508 mm) |
| Max Sample Diameter | 2.8 in (71 mm) |
| Unit Dimensions (W×D×H, lid open/closed) | 24 in × 30 in × 36 in / 19 in (609.6 mm × 762 mm × 914.4 mm / 482.6 mm) |
| Weight | Not specified |
| Noise Level | Not specified |
| Safety Features | Interlocked safety hood, emergency stop button |
| Compliance | CE Directive |
| Brand | Wilson Hardness |
|---|---|
| Origin | USA |
| Manufacturer | Wilson Instruments (A Buehler Company) |
| Model | VH3300 |
| Test Force Range | 0.01–50 kgf (0.1–490.3 N) |
| Measurement Range | 10–100 HV/HK |
| Testing Height × Depth | 105/155 mm (H) × 175 mm (D) |
| Turret | 6-position, supporting up to 3 indenters and 3 load cells simultaneously |
| Objective Lenses | Configurable 3-position turret |
| Standard Indentation Scales | HV0.01–HV50, HK0.01–HK2 |
| Compliance | ISO 6507-1, ISO 4545-1, ASTM E384, ASTM E92 |
| Brand | Wilson Hardness |
|---|---|
| Origin | USA |
| Manufacturer | Wilson Instruments (A Buehler Company) |
| Model | RH2150 |
| Rockwell Scale Range | 10–100 HR |
| Total Test Force | 1–187.5 kgf (9.81–1838.7 N) |
| Maximum Specimen Height | 254 mm (10 in) or 356 mm (14 in) |
| Depth of Test Zone | 200 mm |
| Z-axis Travel | Motorized, Programmable |
| Test Space (H × D) | 254 mm × 200 mm |
| Compliance | ISO 6508-1, ASTM E18, ISO 2039-1/2, DIN 51917 |
| Control Interface | 7″ Touchscreen Panel with DiaMet™ Software Integration |
| Data Export | USB, Ethernet |
| Clamp Force (Optional) | 55 kgf |
| Net Weight | 125 kg |
| Power Supply | 110–240 VAC, 50–60 Hz |
| Brand | Buehler |
|---|---|
| Origin | USA |
| Model | IsoMet 1000 |
| Instrument Type | Precision Cut-Off Machine |
| Enclosure | Fully Enclosed Cutting Chamber |
| Feed Mechanism | Gravity-Driven Loading |
| Optional Accessories | Rotary/Vibratory Chuck, Benchtop Saw Module, Precision Angle Gauge, Diamond Blade Dressing Unit |
| Cooling System | Front-Accessible Removable Coolant Reservoir |
| Compliance | Designed for ASTM E3, ISO 148-1, and ASTM E1245 sample preparation workflows |
| Software Control | Touchscreen Interface with Programmable Depth/Time Termination |
| Brand | Buehler |
|---|---|
| Origin | USA |
| Model | AbrasiMet M |
| Instrument Type | Abrasive Cutting Machine |
| Motor Power | 5.5 hp (4 kW) |
| Voltage/Frequency | 200–240 VAC or 380–460 VAC, 3-phase, 50/60 Hz |
| Cutting Wheel Diameter | 10 in (254 mm) or 12 in (305 mm) |
| Max Sample Length | 25 in (635 mm) |
| Max Cut Depth | 4.3 in (109 mm) |
| Wheel-to-Table Distance | 6.8 in (172 mm) / 5.8 in (147 mm) |
| Wheel Speed | 3000 rpm / 2600 rpm |
| Dual-Blade Cut Width Range | 0.06–1.0 in (1.52–25.4 mm) in 0.06 in (1.52 mm) increments |
| LED Illumination | 2 integrated LED light strips |
| Worktable T-Slot Dimensions | Left: 9.8 × 7.1 in (250 × 180 mm) |
| Right | 9.8 × 4.5 in (250 × 115 mm) |
| Overall Dimensions (Hood Closed) | 31.1 × 27.3 × 25.7 in (791 × 694 × 653 mm) |
| (Hood Open) | 31.1 × 27.3 × 36.2 in (791 × 694 × 919 mm) |
| Safety Features | Interlocked safety hood, emergency stop button |
| Compliance | CE-marked |
| Brand | Wilson Hardness |
|---|---|
| Origin | USA |
| Manufacturer | Wilson Instruments (a division of ITW) |
| Model | Wilson® UH4250 |
| Hardness Scales | HV 0.5–HV 10, HBW 1–HBW 10/250, HRC/HRA/HRB/HRF/HR15N/HR30N/HR45N, HK, HLD |
| Test Force Range | 0.5–250 kgf |
| Maximum Specimen Height | 300 mm |
| Specimen Weight Capacity | 70 kg |
| Turret | 8-position motorized turret with auto-indexing |
| Optical System | 5 MP USB 3.0 camera with digital zoom & autofocus |
| Compliance | ISO 6506-1, ISO 6507-1, ISO 6508-1, ISO 4545-1, ASTM E10, E92, E18, E384, E23, ISO 2039-1/2 |
| Z-axis Drive | Dual-mode (manual handwheel + motorized automatic) |
| Power Supply | 110–240 V AC, 50–60 Hz |
| Brand | Buehler |
|---|---|
| Origin | USA |
| Model | MiniMet 1000 |
| Grinding/Polishing Plate Diameter | 75 mm |
| Dimensions (L×W×D) | 180 mm × 400 mm × 200 mm |
| Number of Grinding/Polishing Plates | 1 |
| Power Supply | 85–264 V, 50–60 Hz, Single Phase |
| Weight | 11 kg |
| Operating Noise Level | <65 dB(A) at 1 m (unloaded) |
| Consumable Compatibility | 73 mm (2.875 in) abrasive papers and polishing cloths |
| Optional Configurations | Manual-only or semi-automatic with dual motorized heads |
| Brand | Buehler |
|---|---|
| Origin | USA |
| Model | Cast N’ Vac 1000 |
| Type | Cold Mounting Press |
| Vacuum Level | 26" Hg (559 Torr) |
| Sample Capacity | >10 specimens per cycle |
| Mounting Material Compatibility | Epoxy and polyester cold-mount resins |
| Rotating Platform | Yes |
| Chamber Sealing | O-ring sealed polycarbonate chamber |
| Included Components | Vacuum pump, rotating chamber base, vacuum gauge, pouring cup, measuring cup, desiccant, fittings |
| Compliance | Designed for ASTM E3, ISO 14577, and GLP-compliant sample preparation workflows |
| Brand | Buehler |
|---|---|
| Origin | USA |
| Model | IsoMet™ Low Speed Cutter |
| Cutting Speed Range | 0–300 rpm |
| Maximum Sample Height | 1.50 in (38.00 mm) |
| Blade Diameter | 5.00 in (127 mm) |
| Feed Mechanism | Gravity-fed |
| Positioning Accuracy | ±0.0001 in (±5 µm) |
| Cutting Type | Straight, Fixed-Angle Sectioning |
| Power Supply | 115 V / 220 V, 1-phase, 60 Hz |
| Compliance | Designed for ASTM E3, ISO 14487, and ISO 13009-compliant metallographic sample preparation |
Show next