IKA MVP 10 basic Diaphragm Vacuum Pump

Overview

The IKA MVP 10 basic is a compact, oil-free diaphragm vacuum pump engineered for reliable, maintenance-light operation in routine laboratory applications requiring dry, chemically inert vacuum generation. Utilizing a dual-head diaphragm mechanism driven by a brushless AC motor, the pump achieves stable evacuation without lubricants—eliminating risk of oil backstreaming, contamination, or hydrocarbon residue in sensitive processes such as solvent evaporation, filtration, freeze drying, and vacuum distillation. Its sealed, corrosion-resistant architecture—featuring all gas-path components fabricated from PTFE or PTFE-reinforced polymers—ensures compatibility with aggressive vapors including organic solvents, acids, and halogenated compounds. Designed to meet the operational demands of modern teaching labs, QC environments, and R&D workstations, the MVP 10 basic delivers consistent performance across variable load conditions while adhering to international safety and electromagnetic compatibility standards (CE, RoHS) and mechanical protection class IP54.

Key Features

• Oil-free diaphragm technology ensures contamination-free vacuum, critical for analytical sample preparation and pharmaceutical process support.
• PTFE-lined gas path provides broad chemical resistance—validated for continuous exposure to acetone, methanol, HCl vapor, and ethyl acetate under standard operating conditions.
• Integrated gas ballast valve enables controlled admission of ambient air to prevent condensable vapor lock; selectable for either low ultimate pressure (8 mbar, valve closed) or enhanced vapor handling capacity (15 mbar, valve open).
• Compact footprint (245 × 155 × 320 mm) and lightweight construction (11.5 kg) facilitate benchtop integration, mobile cart mounting, or installation beneath fume hoods.
• Brushless AC motor delivers high torque at low speed (1380 rpm nominal), minimizing mechanical wear and extending service intervals beyond 10,000 hours under typical duty cycles.
• Robust housing with IP54 ingress protection safeguards internal components against dust and low-pressure water splashes—suitable for shared lab environments with variable ambient conditions.

Sample Compatibility & Compliance

The MVP 10 basic is compatible with standard laboratory vacuum interfaces, including 10 mm ID tubing, B-14 and B-19 ground glass joints via appropriate adapters, and common rotary evaporator manifolds. It is not intended for use with particulate-laden gases, explosive atmospheres (ATEX), or high-vapor-pressure inorganic acids above 60 °C without external cold traps. The pump conforms to DIN EN 60529 (IP54), EU Directive 2014/30/EU (EMC), 2014/35/EU (LVD), and Regulation (EC) No. 1907/2006 (REACH). While it does not incorporate FDA 21 CFR Part 11–compliant audit trails or electronic signatures, its mechanical design supports GLP-aligned documentation when paired with external pressure loggers or validated vacuum controllers.

Software & Data Management

The MVP 10 basic operates as a standalone analog device with no digital interface: it lacks USB, RS232, analog output, or embedded vacuum sensing. All operational parameters—including inlet pressure, flow rate, and vacuum level—are monitored externally using calibrated gauges or third-party vacuum controllers. This design prioritizes reliability and electromagnetic noise immunity over connectivity, making it suitable for environments where EMI-sensitive instrumentation (e.g., NMR, mass spectrometers) is co-located. Users seeking automated pressure regulation may integrate the pump with commercially available PID-based vacuum controllers via its gas ballast actuation port (mechanical linkage only).

Applications

• Routine solvent removal in rotary evaporation systems (up to 2 L flask capacity under optimized condenser conditions).
• Vacuum filtration of aqueous and organic suspensions using Buchner or Hirsch funnels.
• Desiccation of hygroscopic samples in vacuum desiccators equipped with PTFE-coated valves.
• Support vacuum for lyophilizer shelf pre-cooling stages where deep vacuum is non-critical (≥8 mbar acceptable).
• Gas evacuation prior to Schlenk line purging or inert-atmosphere glovebox transfer protocols.
• Low-vacuum degassing of polymer precursors and resin formulations in materials science labs.

FAQ

Is the MVP 10 basic suitable for pumping corrosive gases such as chlorine or hydrogen sulfide?
While PTFE wetted parts provide excellent resistance to many acids and solvents, prolonged exposure to oxidizing gases like Cl₂ or reducing species like H₂S is not recommended without supplemental scrubbing or condensation trapping. Consult IKA’s chemical compatibility chart for specific exposure limits.
Can this pump be used continuously for 24/7 operation?
Yes—its brushless motor and sealed diaphragm assembly are rated for uninterrupted duty under ambient temperatures ≤35 °C and relative humidity ≤70 %. Continuous operation at upper environmental limits requires periodic inspection of diaphragm elasticity and valve seating integrity.
Does the pump include an exhaust filter or muffler?
No. Exhaust is vented directly through the rear port. For noise-sensitive areas or vapor containment, users must install an inline activated carbon filter or connect the exhaust to a dedicated lab ventilation duct.
What maintenance is required?
Annual inspection of diaphragms and check valves is advised. Replacement kits (diaphragm set, valve plates, and gaskets) are available as genuine IKA spare parts (Order No. 3052000). No lubrication or oil changes are necessary.
Is the MVP 10 basic compatible with vacuum ovens?
Yes—provided the oven’s maximum operating temperature does not exceed 40 °C at the pump inlet connection point and condensable vapors are trapped upstream. Avoid direct coupling to ovens lacking integrated cold traps.