IKA T10 Battery ULTRA-TURRAX® Portable Disperser Kit

Overview

The IKA T10 Battery ULTRA-TURRAX® Portable Disperser Kit is an engineered solution for life science laboratories requiring high-performance, cordless sample homogenization and dispersion under variable or field-deployable conditions. Designed around the proven ULTRA-TURRAX® shear principle—based on controlled rotor-stator geometry—the instrument delivers reproducible mechanical energy transfer to biological tissues, suspensions, emulsions, and colloidal systems. Unlike conventional fixed-base dispersers, the T10 Battery integrates a brushless DC motor with a high-density lithium-ion battery, enabling operation independent of mains power while maintaining full speed control, real-time digital feedback, and thermal stability across batch processing cycles. Its compact form factor (239 mm height, 0.5 kg mass), combined with IP-rated electronics and low-noise operation (65 dB[A] at idle), ensures compatibility with biosafety cabinets, mobile diagnostic units, and outdoor field labs where electrical infrastructure is limited or unavailable.

Key Features

• True Cordless Operation: Integrated rechargeable Li-ion battery supports up to 60 minutes of continuous dispersion at typical loads (e.g., tissue homogenization in RIPA buffer), eliminating tethering constraints without compromising torque delivery or speed fidelity.
• Digital Precision Interface: Dual-line LCD display shows real-time rpm and countdown timer (forward/reverse modes), enabling strict adherence to SOP-defined dispersion protocols—critical for GLP-compliant tissue lysis workflows.
• Brushless DC Motor Architecture: Eliminates carbon dust generation and commutator wear, ensuring long-term calibration stability, reduced maintenance intervals, and contamination-free operation essential for nucleic acid or protein extraction applications.
• Flexible Charging Ecosystem: Supports direct USB-C charging (45 W max input) and optional docked charging via R200 C stand—facilitating seamless integration into existing IKA lab furniture and workflow stations.
• Cross-Compatible Tooling: Accepts the full range of ULTRA-TURRAX® S-series dispersion tools, including the included S10 D-7G-KS-65 (24 pcs), optimized for gentle yet effective tissue disruption with minimal foaming or heat-induced denaturation.
• Thermally Managed Duty Cycle: Engineered for 10-minute active operation followed by mandatory 5-minute cooling pause—preventing motor overheating and preserving dispersion consistency across replicate samples.

Sample Compatibility & Compliance

The T10 Battery is validated for use with aqueous-based biological matrices including soft animal tissues (liver, spleen, brain), cultured cells, bacterial pellets, plant leaf homogenates, and viscous lysates (≤200 mPa·s). Its rotor-stator geometry conforms to ISO 8504-2:2000 (mixing equipment performance criteria) and supports method transfer from legacy T10 Basic platforms without revalidation. All electronic components comply with IEC 61010-1:2012 (safety requirements for laboratory equipment), and firmware supports audit-trail-ready operation when paired with IKA LabWorld software (optional). While not intrinsically rated for hazardous environments, its low-voltage DC architecture (<15 V) meets SELV (Safety Extra-Low Voltage) classification per EN 60335-1.

Software & Data Management

Although the T10 Battery operates as a standalone instrument, it interfaces seamlessly with IKA LabWorld PC software via USB-C connection for firmware updates, parameter logging, and export of time-stamped dispersion records (rpm, duration, cycle count). When deployed in regulated environments (e.g., clinical research labs compliant with FDA 21 CFR Part 11), LabWorld enables electronic signature capture, user access levels, and immutable data archiving—supporting traceability requirements for tissue banking, biobanking, and preclinical assay development. The device itself maintains no internal storage; all operational metadata resides exclusively on the host system, aligning with data integrity best practices outlined in ALCOA+ principles.

Applications

• Routine tissue homogenization for RNA/DNA/protein isolation in molecular biology workflows
• Preparation of uniform cell suspensions for flow cytometry and single-cell sequencing
• Dispersion of nanoparticle suspensions and liposomal formulations in pharmaceutical development
• Field-based pathogen lysis during outbreak response or veterinary diagnostics
• Quality control dispersion of cosmetic emulsions and food-grade colloids under non-GMP pilot conditions
• Teaching labs requiring safe, portable instrumentation for hands-on rheological demonstration

FAQ

Is the T10 Battery compatible with existing IKA dispersion tools?
Yes—the T10 Battery accepts all ULTRA-TURRAX® S-series tools designed for the T10 platform, including S10, S18, and S25 geometries. No adapter is required.
Can the battery be replaced by the end user?
Yes—battery replacement is supported via authorized IKA service centers; the sealed module is not user-serviceable but is designated as a field-replaceable unit (FRU) under warranty terms.
Does the device meet regulatory requirements for GMP environments?
The hardware complies with IEC 61010-1 safety standards and supports 21 CFR Part 11–compliant data handling when used with LabWorld software and appropriate IT governance controls. Formal GMP qualification remains site-specific and requires IQ/OQ documentation.
What is the expected service life of the Li-ion battery?
Under normal usage (1–2 cycles/day), the battery retains ≥80 % capacity after 300 full charge/discharge cycles, equivalent to approximately 18–24 months of routine lab use.
Is the LCD display readable under bright ambient light?
Yes—the monochrome transflective LCD features high contrast and wide viewing angles, optimized for visibility in both laminar flow hoods and outdoor daylight conditions.