METTLER TOLEDO HA-D90 Aluminum Foil Sample Pans (80 pcs/box, Part No. 13865)

Overview

The METTLER TOLEDO HA-D90 Aluminum Foil Sample Pans (Part No. 13865) are precision-engineered consumables designed exclusively for use with METTLER TOLEDO halogen and infrared moisture analyzers—including the HG63, HR83, and HC103 series—as well as compatible third-party thermogravimetric instruments. These disposable pans are manufactured from high-purity, low-residue aluminum foil to ensure minimal background interference during rapid thermal drying cycles. Each pan features a consistent 90 mm nominal diameter and optimized sidewall geometry to promote uniform heat transfer and sample exposure under the heating element, directly supporting reproducible mass-loss measurements per ASTM D4442, ISO 712, and USP <921> guidelines for loss-on-drying (LOD) analysis. As a certified OEM component, the HA-D90 meets stringent dimensional tolerances and surface cleanliness standards required for GLP/GMP-compliant moisture testing workflows in pharmaceutical, food, chemical, and materials laboratories.

Key Features

• Manufactured in Switzerland to METTLER TOLEDO’s exacting quality specifications for dimensional consistency and thermal stability
• Low-mass aluminum construction minimizes thermal inertia—enabling faster equilibration and reduced cycle times without compromising measurement fidelity
• Non-reactive surface prevents catalytic degradation or adsorption artifacts in sensitive samples (e.g., polymers, APIs, hygroscopic powders)
• Pre-sterilized and individually sealed in blister packaging to eliminate particulate contamination and moisture uptake prior to use
• Compatible with automated sample handling accessories, including robotic pan loaders and barcode-scanned workflow modules on SmartCal-enabled instruments
• Traceable lot documentation provided upon request for audit-ready compliance with FDA 21 CFR Part 11 data integrity requirements

Sample Compatibility & Compliance

The HA-D90 pans support a broad range of solid, semi-solid, and granular matrices—including active pharmaceutical ingredients (APIs), excipients, dairy powders, cereal flours, catalysts, and ceramic precursors. Their shallow depth and wide aperture optimize surface-area-to-volume ratio for efficient water evaporation, particularly critical for heterogeneous or low-permeability samples. When used in conjunction with METTLER TOLEDO’s SmartCal validation kits (e.g., SmartCal 12/24, cSmartCal series), the HA-D90 contributes to documented instrument performance verification per ISO/IEC 17025 and internal SOPs. All batches undergo routine testing for residual hydrocarbons and metallic impurities per ICH Q3D elemental impurity thresholds. The pans are non-sterile but meet ISO 14644-1 Class 8 cleanroom handling standards at time of packaging.

Software & Data Management

While the HA-D90 itself is a passive consumable, its part number (13865) is fully integrated into METTLER TOLEDO’s LabX software database. Users can assign the HA-D90 to specific method templates, track inventory consumption via barcode scanning, and auto-populate audit trails with lot-specific metadata—including manufacturing date, expiry window (36 months from production), and certificate-of-conformance reference numbers. LabX supports electronic signature capture for consumable change logs, fulfilling ALCOA+ principles (Attributable, Legible, Contemporaneous, Original, Accurate, Complete, Consistent, Enduring, Available). Integration with ERP systems (e.g., SAP, Oracle) is enabled via standard ODBC drivers and XML-based batch reporting.

Applications

• Pharmaceutical QC release testing of raw materials and finished dosage forms per USP <921> and Ph. Eur. 2.2.32
• Moisture content verification in lithium-ion battery cathode/anode powders prior to slurry preparation
• Quality control of hygroscopic food ingredients (e.g., whey protein isolate, maltodextrin) across ambient and accelerated storage conditions
• Process validation support for fluid bed dryers and spray dryers in continuous manufacturing environments
• Research-grade LOD profiling of nanomaterials and metal-organic frameworks (MOFs) where pan-induced variability must be excluded

FAQ

Are HA-D90 pans suitable for volatile organic solvent residues testing?
No—aluminum foil may interact with aggressive solvents (e.g., chloroform, THF). For such applications, use glass fiber filters (HA-F) or stainless steel dishes (HA-DR or STAINLESS DISH).
Can HA-D90 pans be reused after cleaning?
Not recommended. Residual sample matrix or thermal oxidation alters mass baseline and compromises repeatability. METTLER TOLEDO specifies single-use only.
What is the maximum operating temperature limit for HA-D90 pans?
Designed for continuous use up to 200 °C; short-term exposure to 250 °C is permissible but may induce slight warping affecting pan-level detection in automated systems.
Is there a difference between HA-D90 (13865) and HA-D90/C (12200527)?
Yes—13865 contains 80 pans per box in blister packaging; 12200527 contains 50 pans per box with alternative sealing configuration. Both share identical dimensions and material specs.
Do HA-D90 pans require calibration or certification before first use?
No—each lot is pre-certified for mass uniformity (±0.2 mg tolerance) and supplied with a Certificate of Conformance. Optional BAM or MT traceable certificates are available through SmartCal kit variants.