QJSCY-1215 IP Ingress Protection Water Resistance Test Chamber
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | QJSCY-1215 |
| Price | USD 7,700 (FOB Shanghai) |
| Temperature Range | Ambient to +60 °C (optional ambient-controlled enclosure available) |
| Rainfall Intensity | Adjustable 0.5–10 L/min/m² (calibrated per IEC 60529 Annex B) |
| Droplet Diameter | 0.1–0.4 mm (monodisperse nozzle array, certified per ISO 16750-4) |
| Wind Speed Range | 0–12 m/s (optional integrated axial fan system) |
| Test Duration | 0–99 h 99 min 99 s (programmable timer with non-volatile memory) |
Overview
The QJSCY-1215 IP Ingress Protection Water Resistance Test Chamber is an engineered environmental simulation system designed to perform standardized ingress protection (IP) rating verification—specifically IPX1 through IPX6—according to IEC 60529, GB/T 4208–2017 (equivalent to IEC 60529:2013), and ISO 20653 for road vehicles. It utilizes a precisely controlled oscillating spray arm mechanism combined with calibrated nozzles to replicate defined rain exposure conditions, including vertical dripping (IPX1–IPX2), splashing (IPX3–IPX4), and powerful water jets (IPX5–IPX6). The chamber’s architecture supports repeatable, traceable, and auditable testing of enclosures for lighting systems, automotive lamps, outdoor electrical cabinets, signaling devices, and industrial control housings under rigorously documented environmental stress.
Key Features
- Oscillating spray arm assembly with ±60° swing angle (total 120° arc), driven by precision stepper motor and optical position feedback for cycle repeatability ≤ ±0.2°
- Stainless steel (SUS304 2B finish) interior chamber (800 × 800 × 800 mm W×D×H) and powder-coated cold-rolled steel exterior (1100 × 1300 × 1700 mm)
- 25 calibrated stainless steel nozzles (φ0.1–0.4 mm orifice), spaced at 50 mm intervals on a 400 mm radius ring; each nozzle delivers 0.07 L/min at nominal pressure (total flow ≈ 1.75 L/min, adjustable via inline rotameter)
- Programmable test timer with 0–99 h 99 min 99 s resolution, EEPROM-backed retention, and real-time clock synchronization
- Integrated stainless steel sample turntable (customizable load capacity up to 50 kg) with laser-etched drainage grooves and centering alignment pins
- Compliance-ready hardware architecture: CE-marked power supply (AC 220 V ±10%, 50 Hz), grounded chassis, IP54-rated control panel, and overpressure/overheat safety interlocks
Sample Compatibility & Compliance
The QJSCY-1215 accommodates samples up to 600 mm in maximum dimension (height or width), with unrestricted depth when mounted on the supplied stainless steel tray. It supports static and dynamic mounting configurations—including tilt-angle fixtures for angled exposure per IEC 60529 Clause B.2. The system is validated against national and international standards including GB/T 4208–2017, GB/T 4942.2–1993, ISO 16750-4:2018 (road vehicles), and EN 60529:2014. Calibration documentation includes nozzle flow rate verification reports (traceable to NIM-certified flow standards), angular displacement validation, and timer accuracy certification (±0.1 s/h). Optional third-party calibration services are available upon request to support ISO/IEC 17025-accredited laboratories.
Software & Data Management
While the base unit operates via intuitive front-panel membrane keypad and LED display, optional RS-485 Modbus RTU interface enables integration into centralized lab management systems (LIMS) or SCADA environments. All test parameters—including start time, duration, arm oscillation count, and manual override logs—are stored in non-volatile memory with timestamping. Audit trail functionality meets GLP and GMP documentation requirements: user ID tagging, parameter change history, and event logging (e.g., door open/closed, power interruption, timeout termination) are retained for ≥10,000 cycles. Firmware updates are delivered via USB port with cryptographic signature verification.
Applications
- Validation of IPX3–IPX6 ratings for LED streetlights, traffic signal housings, and marine navigation lamps
- Pre-certification testing of automotive headlamps, fog lamps, and EV battery enclosures per ISO 16750-4 and SAE J2344
- Quality assurance for industrial HMIs, junction boxes, and outdoor telecom cabinets prior to UL 50E or EN 60529 submission
- R&D evaluation of gasket integrity, sealant performance, and housing material hydrophobicity under cyclic wetting
- Environmental stress screening for MIL-STD-810G Method 512.5 (rain) compliance readiness
FAQ
Does the QJSCY-1215 meet IEC 60529 requirements for IPX5 and IPX6 testing?
Yes—the nozzle configuration, flow rate distribution, and oscillation dynamics comply fully with IEC 60529 Annex B for both low-pressure (IPX5) and high-pressure (IPX6) water jet testing when operated within specified pressure and distance parameters.
Can the chamber be configured for continuous rain (IPX1–IPX2) without oscillation?
Yes—oscillation can be disabled via control panel menu; the spray ring remains active for vertical drip or tilted-drip exposure per Clauses 13.2.1 and 13.2.2 of IEC 60529.
Is temperature control integrated into the standard model?
No—ambient-temperature operation is standard. A thermostatically regulated air-circulation module (−10 °C to +60 °C) is available as an optional retrofit with independent PID controller and Class II insulation.
What maintenance is required to ensure long-term calibration stability?
Monthly visual inspection of nozzles for clogging, quarterly flow rate verification using certified rotameter, and annual angular encoder recalibration are recommended. Stainless steel components require only deionized water rinse after saline or detergent-based tests.
Is technical support available outside mainland China?
Yes—remote diagnostics, firmware updates, and application engineering consultation are provided globally via secure TeamViewer sessions and English-language documentation (IEC/ISO/GB bilingual manuals included).
