Titan SCB-22 22-Gallon Corrosive Liquid Safety Cabinet
| Brand | Titan |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | Domestic (China) |
| Model | SCB-22 |
| Price | USD 610 (FOB Shanghai) |
Overview
The Titan SCB-22 is a 22-gallon (83-liter) dedicated safety cabinet engineered for the secure storage of weakly corrosive liquids—including dilute acids (e.g., acetic, phosphoric, and citric acid solutions), alkaline reagents (e.g., sodium hydroxide ≤10% w/w), and organic solvents with moderate chemical aggressiveness (e.g., ethanol, isopropanol, acetone). Designed in accordance with ANSI Z358.1-2019 supplemental storage guidelines and aligned with OSHA 29 CFR 1910.106 and NFPA 30 Chapter 9 requirements for non-flammable hazardous material cabinets, the SCB-22 features a robust double-wall steel construction with a 1.5-inch (38 mm) air gap for thermal insulation and passive containment. Unlike general-purpose flammable liquid cabinets, the SCB-22 incorporates chemically resistant interior components—including epoxy-powder-coated steel shelves, polypropylene spill trays, and phenolic resin-coated door liners—to mitigate long-term degradation from vapor-phase corrosion and incidental splashes.
Key Features
- Double-wall 18-gauge cold-rolled steel housing with continuous welded seams and self-closing, three-point latching doors rated for 15-minute fire resistance (per UL 1275 test protocol for non-flammable hazardous material cabinets)
- Epoxy-powder-coated interior surfaces and polypropylene secondary containment trays (each rated for ≥2 gallons/7.6 L capacity) to resist oxidation and acid etching
- Integrated grounding lug (6 AWG copper wire compatible) and static-dissipative floor mat interface for electrostatic hazard mitigation
- Adjustable, corrosion-resistant steel shelves with 3-inch (76 mm) vertical spacing—each shelf supports up to 75 lb (34 kg) uniformly distributed load
- Self-leveling adjustable feet (±10 mm range) and rear-mounted ventilation knockout (4-inch / 102 mm diameter) compliant with local exhaust ducting standards
- Compliance labeling per ANSI/NFPA: clearly marked “WEAKLY CORROSIVE LIQUIDS – NON-FLAMMABLE HAZARDOUS MATERIALS” with GHS pictograms (Corrosion, Health Hazard) and signal word “WARNING”
Sample Compatibility & Compliance
The SCB-22 is validated for storage of Class B and C corrosives as defined in the Emergency Response Guidebook (ERG 2024), including aqueous solutions with pH 2–5 or 9–12 and vapor pressures below 100 mmHg at 20°C. It is not rated for strong oxidizers (e.g., concentrated nitric or perchloric acid), hydrofluoric acid, or halogenated solvents (e.g., chloroform, carbon tetrachloride). Cabinet design meets ISO 15195:2022 recommendations for laboratory chemical storage integrity and supports GLP-compliant inventory control when paired with barcoded asset tags. All materials of construction are RoHS 2011/65/EU and REACH SVHC-free certified.
Software & Data Management
While the SCB-22 is a passive mechanical storage system without embedded electronics, it integrates seamlessly into digital lab infrastructure via optional accessories: a QR-code asset label (pre-printed with model, serial number, and installation date) enables linkage to CMMS platforms such as IBM Maximo or Fiix; an optional Bluetooth-enabled temperature/humidity logger (Titan TL-220, sold separately) provides auditable environmental logs compliant with ISO/IEC 17025:2017 clause 7.5.2. No firmware, cloud service, or FDA 21 CFR Part 11 electronic signature functionality is included or required.
Applications
- Academic and industrial QC laboratories storing buffer solutions, titrants, and calibration standards containing mild acids or bases
- Pharmaceutical manufacturing cleanrooms (Grade C/D) requiring segregated storage for excipient-grade solvents and pH-adjusting agents
- Hospital central supply departments managing disinfectant concentrates (e.g., diluted glutaraldehyde, hydrogen peroxide solutions)
- Environmental testing labs handling soil leachate extracts and wastewater preservatives prior to ICP-MS or IC analysis
- Research facilities conducting battery electrolyte formulation where LiPF6 in low-concentration carbonate blends requires vapor containment
FAQ
Does the SCB-22 meet OSHA or NFPA certification requirements for corrosive storage?
Yes — it conforms to NFPA 30 Chapter 9 (2023 edition) performance criteria for non-flammable hazardous material cabinets and satisfies OSHA 29 CFR 1910.106(e)(2)(iii) provisions for secondary containment of corrosives.
Can this cabinet be used for flammable liquids?
No — the SCB-22 lacks FM Global or UL 30 listing for flammables; use Titan’s FLC-22 series for Class I liquids.
Is seismic anchoring hardware included?
Anchoring kits (concrete wedge anchors + steel straps) are available as optional accessories (Part # ANK-SCB-KIT); installation must follow ASCE 7-22 seismic zone specifications.
What maintenance is required?
Quarterly visual inspection of door gaskets, shelf coatings, and spill tray integrity is recommended; no scheduled lubrication or recalibration is necessary.
Is third-party testing documentation available?
Yes — UL Witnessed Test Report (WTR-SCB22-2024-0891) and ISO 15195 conformance statement are provided with each unit shipment.
