Titan SUC-15H Heated Multifunctional Ultrasonic Cleaner

Overview

The Titan SUC-15H Heated Multifunctional Ultrasonic Cleaner is an engineered solution for routine laboratory cleaning, degassing, and surface decontamination tasks requiring both cavitation-based cleaning efficacy and precise thermal control. Operating on the principle of piezoelectrically generated ultrasonic waves at a fixed frequency of 37 kHz, the unit induces controlled acoustic cavitation in aqueous or compatible solvent media—producing microjet implosions that dislodge particulate matter, organic residues, and biofilm from complex geometries including pipette tips, glassware, surgical instruments, and precision components. Integrated heating (20–60 °C) enhances solubilization kinetics and accelerates removal of waxy, lipidic, or proteinaceous contaminants without compromising structural integrity of sensitive substrates. Designed for continuous operation in QC labs, R&D facilities, and clinical support environments, the SUC-15H complies with fundamental safety and performance expectations aligned with IEC 61000-6-3 (EMC) and IEC 61010-1 (safety for laboratory equipment).

Key Features

• 15-liter stainless steel tank (304 grade) with rounded corners for uniform energy distribution and ease of cleaning
• Fixed-frequency 37 kHz transducer array delivering consistent cavitation intensity across full load conditions
• 240 W nominal ultrasonic power output optimized for balance between cleaning efficiency and component longevity
• Digital PID temperature controller enabling stable ±1.5 °C regulation within 20–60 °C range; heater located beneath tank base for uniform thermal profile
• Programmable digital timer (1–99 minutes) with automatic shutdown and audible end-of-cycle alert
• Integrated sound-dampening lid with ergonomic handle and transparent viewing window—reduces ambient noise to ≤55 dB(A) at 1 m distance
• Front-panel mounted quick-connect drain and fill ports compatible with standard 8 mm ID tubing for hands-free fluid exchange
• Over-temperature and dry-run protection circuits prevent heater activation without sufficient liquid level

Sample Compatibility & Compliance

The SUC-15H accommodates a broad spectrum of sample types—including borosilicate glassware, stainless steel tools, aluminum fixtures, ceramic substrates, and polymer-based labware—provided compatibility with aqueous or low-volatility cleaning solutions (e.g., diluted alkaline detergents, ethanol/water mixtures, or enzymatic formulations). It is not intended for use with flammable solvents above flash point thresholds or highly corrosive media (e.g., concentrated HNO₃ or HF). While not certified to ISO 13485 or FDA 21 CFR Part 11 out-of-the-box, its operational repeatability, traceable temperature calibration points, and audit-ready timer logs support integration into GLP/GMP-aligned workflows where instrument qualification (IQ/OQ/PQ) is performed per internal SOPs. The unit meets CE marking requirements for laboratory equipment under the Low Voltage Directive (2014/35/EU) and EMC Directive (2014/30/EU).

Software & Data Management

The SUC-15H operates via embedded firmware without external PC dependency. All operational parameters—including set temperature, elapsed time, and cycle completion status—are displayed on a dual-line LCD interface with LED backlighting. Temperature calibration offsets can be adjusted via service mode (accessed using manufacturer-provided procedure), supporting periodic verification against NIST-traceable thermometers. Though lacking network connectivity or data export functionality, the device maintains non-volatile memory for last-used settings and supports manual logbook documentation of cleaning cycles for internal quality records. For laboratories requiring electronic record retention, integration with facility-wide LIMS or ELN systems may be achieved through external environmental monitoring modules interfaced via analog 4–20 mA outputs (optional accessory).

Applications

• Routine cleaning of volumetric flasks, burettes, cuvettes, and chromatography vials prior to analytical use
• Preparation of metal and ceramic substrates for SEM/EDS analysis by removing polishing residues and adsorbed hydrocarbons
• Decontamination of reusable surgical instruments in low-resource clinical labs meeting WHO-recommended cleaning benchmarks
• Removal of flux residues from PCB assemblies during electronics prototyping and failure analysis
• Accelerated extraction of plant metabolites from ground tissue in phytochemical screening workflows
• Disaggregation of nanoparticle agglomerates in colloidal suspension preparation for DLS or TEM characterization

FAQ

Is the ultrasonic power adjustable?
No—the SUC-15H delivers a fixed 240 W output at 37 kHz to ensure consistent cavitation intensity and simplify operational validation.
Can this unit be used with organic solvents?
Only with low-flashpoint, non-flammable solvents such as isopropanol/water blends (<30% v/v) and under strict ventilation and spark-proof conditions. Pure acetone, ether, or benzene are prohibited.
Does the unit include a basket or accessories?
A perforated stainless steel mesh basket (200 × 120 × 80 mm) and a removable lid-mounted thermometer holder are included standard.
What maintenance is required?
Weekly tank descaling using 5% citric acid solution; biannual inspection of transducer mounting integrity and seal condition around drain fittings.
Is technical support available outside China?
Yes—Titan provides remote diagnostics and English-language documentation; regional distributors in EU, North America, and Southeast Asia offer local calibration and repair services under warranty terms.