Reactor
Filter
Showing 31–60 of 142 results
| Brand | Chemn |
|---|---|
| Origin | Anhui, China |
| Model | NS6-20D-SS1-P3-T2 |
| Vessel Capacity | 10 mL & 20 mL per station |
| Design Pressure | 10 MPa (100 bar) |
| Design Temperature | 200 °C |
| Construction Material | 316L Stainless Steel & Hastelloy C-276 |
| Heating Method | Embedded Aluminum Sleeve Heater |
| Stirring Mechanism | Magnetic Stirring |
| Speed Range | 100–1200 rpm |
| Control Interface | 7-inch HD Touchscreen with PID Temperature Control & Stepless Speed Regulation |
| Pressure Monitoring | Yaskawa (USA) Pressure Gauge (optional pressure transmitter) |
| Safety Valves | Fitok (USA) Relief Valve & Rupture Disc |
| Gas Inlet/Outlet Valves | Swagelok (USA) Needle Valves |
| Power Supply | 200–240 V AC, 50–60 Hz |
| Controller Dimensions | 260 × 470 × 260 mm (L×D×H) |
| Brand | CHEMn |
|---|---|
| Model | NSG |
| Origin | Anhui, China |
| Reactor Volume Options | 10, 25, 50, 100, 300, 500, 1000 mL |
| Design Temperature | 500 °C (Standard Heating up to 300 °C) |
| Maximum Working Pressure | 35 MPa (Optional) |
| Standard | 20 MPa (for 25–100 mL), 10 MPa (for 300–1000 mL) |
| Construction Material | 316L Stainless Steel or Hastelloy C-276 (Optional) |
| Stirring Speed Range | 100–1200 rpm |
| Heating Method | Embedded Stainless Steel Heating Module |
| Heating Power | 1 kW |
| Vacuum Capability | Up to 35 MPa (Note: This value reflects maximum rated pressure |
| assumed typo — corrected to “Rated Pressure | 35 MPa”) |
| Control Interface | 7-inch capacitive touchscreen |
| Data Export | USB-based real-time logging and report generation |
| Safety Systems | Dual-pressure protection (Fitok needle valves, certified safety valve + custom rupture disc), over-temperature cutoff, over-pressure audible alarm |
| Sealing | Tongue-and-groove main seal |
| Stirring Mechanism | Internal magnetic stir bar (PTFE-, glass-, or metal-core options available) |
| Brand | Brilliance |
|---|---|
| Model | Bri-PC-P |
| Type | Continuous-flow Photochemical Plate Reactor |
| Construction | Borosilicate Glass / Quartz Glass Plates |
| Channel Geometry | Planar Microchannel |
| Active Volume | 5–50 mL (configurable per module) |
| Light Source Range | 254–950 nm (quartz-compatible down to 254 nm |
| Max Irradiance | ≤700 mW/cm² (measured at channel surface) |
| Light Stability | <5% intensity decay/year |
| Light Power Control | Stepless electronic dimming per illumination panel |
| Thermal Management | External recirculating chiller interface (not included) |
| Pump Configuration | Integrated dual syringe pumps (standard), wetted parts: 316L stainless steel |
| Electrical Input | 100–240 VAC, 50/60 Hz |
| Compliance | Designed for GLP-compliant photochemical process development and scale-up |
| Brand | Corning |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Product Category | Imported Instrument |
| Model | G1 Photochemical |
| Instrument Type | Microchannel Reactor |
| Usable Volume | Small-scale |
| Construction Material | Borosilicate Glass |
| Operating Pressure | Low-pressure (up to 18 bar) |
| Flow Rate Range | 15–250 mL/min |
| LED Wavelength Options | 365 nm, 385 nm, 405 nm, 485 nm, 610 nm, and 4000 K White Light |
| Illumination Intensity | Up to 100 mW/cm² |
| Illumination Geometry | Dual-side transverse illumination through glass walls |
| Thermal Management | Integrated liquid-cooled LED array |
| Scalability Path | Direct process transfer to Corning G3 Photochemical Reactor |
| Brand | Corning |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Advanced-Flow® G1 |
| Pricing | Upon Request |
| Brand | Corning |
|---|---|
| Origin | USA |
| Model | Advanced-Flow® G1 |
| Reactor Type | Continuous Flow Microreactor |
| Construction Material | Silicon Carbide (SiC) with Aluminum Heat Exchange Module, PFA Tubing, and Perfluoroelastomer (FFKM) Seals |
| Operating Temperature Range | –60 °C to 200 °C |
| Maximum Operating Pressure | 18 barg (reaction channel), 6 barg (heat exchange layer) |
| Volumetric Flow Rate | 15–250 mL/min |
| Internal Hold-up Volume per Module | ~10 mL |
| Chemical Resistance | HF-compatible, caustic-resistant up to 200 °C |
| Modular Compatibility | Interchangeable with Corning Advanced-Flow® G1 Glass Modules |
| Metal-Free Fluid Path | Yes |
| Scale-up Pathway | Seamless transition from G1 lab-scale to G4 production-scale with no scale-up effect |
| Origin | USA |
|---|---|
| Manufacturer Type | Distributor |
| Origin Category | Imported |
| Model | AFR Lab |
| Quotation | Upon Request |
| Usable Volume | Medium-Scale |
| Construction Material | Specialty Glass / PFA / PETE / Perfluoroelastomer |
| Operating Pressure | High-Pressure (0–18 bar(g)) |
| Capacity | 2.7 mL per reactor module |
| Vacuum Capability | Not Specified |
| Brand | Corning |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Product Category | Imported |
| Model | G1 SiC |
| Pricing | Upon Request |
| Instrument Type | Microchannel Reactor |
| Sample Volume Capacity | Trace (≤2.5 mL) |
| Construction Material | Silicon Carbide (SiC) |
| Operating Pressure Range | Medium Pressure (up to 18 bar) |
| Total Internal Volume | 1.7 mL (per reactor unit, configurable) |
| Brand | Corning |
|---|---|
| Origin | USA |
| Model | G3 / G3 Photochemical |
| Instrument Type | Microchannel Reactor |
| Construction Material | Borosilicate Glass |
| Operating Pressure | ≤1.8 MPa (260 psi) |
| Temperature Range | −25 °C to 200 °C |
| Fluid Throughput Capacity | Up to 1000 m³/year |
| Illumination Compatibility | LED-based, six discrete wavelengths (365 nm–455 nm), dual-side irradiation |
| Scalability | Direct process transfer from Corning G1 to G3 platform |
| Regulatory Alignment | Designed for GLP-compliant continuous manufacturing environments |
| Brand | Corning |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | G4 |
| Pricing | Upon Request |
| Instrument Classification | Microchannel Reactor |
| Usable Volume | Small-Scale |
| Construction Material | Silicon Carbide (SiC) Ceramic with PFA Tubing and Perlast® Seals |
| Operating Pressure | Low-Pressure (≤10 bar typical, compatible with atmospheric to moderate pressurized operation) |
| Fluid Throughput Capacity | Up to 2000 m³/year |
| Regulatory Compliance | Designed for GLP/GMP-aligned continuous manufacturing environments |
| Brand | Corning |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | Microchannel Reactor |
| Quotation | Upon Request |
| Instrument Classification | Microchannel Reactor |
| Sample Volume Capacity | Microliter-to-milliliter scale (microfluidic regime) |
| Construction Material | Chemically resistant glass-ceramic composite |
| Total System Volume | 10 L (modular stack configuration) |
| Maximum Operating Pressure | ≤20 bar (2.0 MPa) |
| Maximum Operating Temperature | 200 °C |
| Vacuum Capability | Not applicable (designed for pressurized operation) |
| Brand | Corning |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | Lab |
| Instrument Classification | Microchannel Reactor |
| Usable Volume | Small-Scale |
| Instrument Material | Specialty Glass |
| Operating Pressure | Low to Medium Pressure (0–18 bar g) |
| Capacity | 10 mL |
| Flow Rate Range | 0–10 mL/min |
| Operating Temperature Range | −40 °C to 200 °C |
| Reactor Module Internal Volume | 2.7 mL per module |
| Light Sources | 365 nm, 385 nm, 405 nm, 475 nm, 610 nm, and 4000 K white LED |
| LED Irradiance | >100 mW/cm² (adjustable) |
| Cooling | Liquid-cooled LED modules |
| Control Interface | Wireless wavelength & intensity selection |
| Sealing Materials | PFA, PETE, Perfluoroelastomer |
| Brand | Corning |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | LFR |
| Flow Rate Range | 0–10 mL/min |
| Operating Temperature Range | −25 °C to 200 °C |
| Maximum Operating Pressure | 18 bar |
| Material | Chemically Resistant Borosilicate Glass |
| Pressure Class | Medium-Pressure |
| Volume Class | Medium-Scale |
| Metal-Free Fluid Path | Yes |
| Scalability | Linear Scale-Up Without Process Deviation |
| Optical Transparency | Full Visual Access for Reaction Monitoring and Photochemistry |
| Brand | Corning |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Nebula |
| Pricing | Upon Request |
| Instrument Classification | Microchannel Reactor |
| Usable Volume | Small-scale |
| Material | Specialty Glass |
| Operating Pressure | Low-pressure |
| Capacity | 0.5 mL |
| Additional Application Fields | Food Science, Biotechnology, Agriculture, Petrochemicals |
| Vacuum Capability | 0.6 MPa |
| Brand | Deleite |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | DLT-EPR-2L |
| Capacity | 2 L |
| Vessel Material | Borosilicate Glass 3.3 (Duran®/Pyrex® grade) |
| Operating Pressure Range | Ambient to –0.095 MPa (absolute) |
| Temperature Range | –60 °C to +200 °C |
| Stirring Speed | 0–800 rpm (digital speed control, explosion-proof motor) |
| Motor Power | 120 W |
| Sealing System | Mechanical seal with ceramic–PTFE hybrid components |
| Stirrer Type | Single-layer anchor impeller (PTFE-coated stainless steel shaft, Ø8 mm) |
| Lid Configuration | 5-port standard ground-glass interface (1× 19# for temperature probe |
| Cooling/Heating Jacket | Dual-layer borosilicate glass with Φ12 mm jacket inlet/outlet (PTFE tubing compatible) |
| Base Frame | 304 stainless steel |
| Bottom Discharge Valve | Glass–PTFE composite plug valve |
| Electrical Supply | 220 V AC, 50 Hz |
| Compliance | Designed for GLP-compliant laboratory synthesis under vacuum or atmospheric conditions |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | CCR-1000G |
| Reactor Type | Flow-through Catalytic Hydrogenation System |
| Max Operating Pressure | 0.4 MPa |
| Temperature Range | Ambient +15°C to 200°C (Aluminum Block Heating Block) |
| Liquid Flow Rate | Up to 0.9 mL/min |
| Gas Flow Rate | Up to 100 mL/min (H₂) |
| Catalyst Cartridge | Stainless Steel Column (Ø5 × 50 mm, replaceable) |
| Wetted Materials | PP (reaction reservoir), Fluoropolymer (fluidic pathways), Perfluoroelastomer (O-rings), SUS316 (glass support components) |
| Power Supply | AC 100 V, 50/60 Hz, 2.5 A, 250 VA |
| Dimensions (W×D×H) | 356 × 461 × 389 mm |
| Safety Features | Pressure-sensor-triggered emergency shutdown, independent overtemperature protection for heating block, heater overload protection, leakage and overcurrent protection, self-diagnostic system, communication failure detection |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | DDL-1000 / DDL-2000 |
| Reactor Type | Jacketed Laboratory Reactor System |
| Temperature Control Modes | Reaction Mass Control, Jacket Control, Isothermal Mode, Gradient Ramp Mode |
| Stirring | Mechanical Agitation (PTFE or SUS304 Impeller) |
| Temp. Range | 10–80 °C (Jacket) |
| Temp. Stability | ±0.1 °C |
| Stirring Speed | 10–1059 rpm |
| Max. Torque | 19.6 N·m (DDL-1000), 0.49 N·m (DDL-2000) |
| Cooling Rate (Jacket) | up to 30 K/min |
| Heating Rate (Jacket) | up to 7.0 K/min |
| Safety Systems | Independent Over-Temperature Protection, Leakage Current Breaker, Low-Coolant-Level Alarm, Emergency Rapid-Cooling Function, SSR Failure Detection, Dual Temperature Limit Alarms |
| Power Supply | AC 100 V, 50/60 Hz (7 A / 700 VA for DDL-1000 |
| Dimensions & Weight | 290×380×790 mm, 20 kg (DDL-1000) |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | DDS |
| Reactor Capacity | 4 × (50 / 100 / 250 mL, independent) |
| Temperature Control Range | −50 to 250 °C (requires external chiller) |
| Temperature Accuracy | ±0.5 K (−20–100 °C, aluminum block), ±1 K (100–180 °C, aluminum block) |
| Stirring Speed | 125–1000 rpm |
| Max. Heating Rate | Tr < 5.3 K/min, Tj < 19.3 K/min (250 mL water in glass reactor) |
| Max. Cooling Rate | Tr < 7.2 K/min, Tj < 29.6 K/min (250 mL water) |
| Max. Heat Removal Capacity | 0.74–1.1 W/g (200 mL water) |
| Heat Flow Measurement Resolution | 0.1 W, ±5% error (standard conditions) |
| Control Modes | Reactor temperature, aluminum block temperature, gradient, isothermal |
| Control Method | PID heating/cooling + cascade control |
| Liquid Addition | 8-channel volumetric dosing |
| Agitation Type | Propeller stirring |
| Optional pH Control | 0–14, acid/base titration |
| Heat Measurement Principle | Thermal conductivity-based calorimetry with calibration |
| Data Visualization | Real-time & historical trend graphs |
| Safety Systems | Leakage current protection, independent overtemperature cutoff, motor overload protection, software self-diagnosis |
| Flask Ports | Rodaviss 24, NS 14/23 (×3), GL 14 (×1) |
| Vessels | Borosilicate glass, round-bottom, graduated (50 mL or 250 mL) |
| Wetted Materials | Glass, PTFE, PPS, Karlez®, SUS316 |
| Dimensions (W×D×H) | 650 × 490 × 380 mm |
| Weight | ~59 kg |
| Power Supply | AC 100 V, 50 Hz, 2000 VA, 20 A |
| Brand | Gongyi Yuyi Instrument |
|---|---|
| Origin | Henan, China |
| Model | MCR-3 |
| Microwave Frequency | 2450 MHz ±15 Hz |
| Microwave Output | Continuous wave, adjustable up to 800 W |
| Total Input Power | ≤1300 W |
| Temperature Control Range | Ambient to 250 °C |
| Temperature Control Accuracy | ±1 °C |
| Temperature Measurement Method | Contact-type PTFE-coated platinum resistance sensor (Class 0.2 accuracy) |
| Maximum Operating Pressure | Medium-pressure compatible (with optional vacuum accessory: –0.098 MPa) |
| Reaction Vessel Compatibility | 50–500 mL standard ground-glass joints (open-system configuration) |
| Construction Material | Stainless steel cavity and housing |
| Integrated Features | Built-in magnetic stirrer (stepless speed control), inert gas inlet port, ventilation/exhaust ducting, safety interlock door switch, magnetron overheat protection, multi-segment programmable operation (up to 5 segments), real-time temperature curve display, Flash memory parameter retention |
| Brand | Great Wall |
|---|---|
| Origin | Henan, China |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | GR-3L |
| Instrument Classification | Jacketed Glass Reactor |
| Usable Volume | 3 L |
| Vessel Material | Borosilicate Glass 3.3 |
| Operating Pressure Range | –0.1 to 0.0 MPa (gauge) |
| Vacuum Level | ≤ –0.098 MPa (absolute) |
| Jacket Pressure Rating | ≤ +0.03 MPa |
| Temperature Range | –80 °C to +200 °C |
| Stirring Speed | 50–500 rpm |
| Stirring Power | 70 W |
| Torque | 70 N·cm |
| Temperature Sensor | Pt100 (±0.1 °C accuracy) |
| Condenser Surface Area | ~0.025 m² |
| Constant-Pressure Funnel Capacity | 200 mL |
| Frame Material | SUS304 Stainless Steel |
| Sealing Material | PTFE |
| Electrical Supply | 110 V / 60 Hz or 220–240 V / 50–60 Hz |
| Dimensions (W×D×H) | ~480 × 420 × 1200 mm |
| Weight | Approx. 45 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | 1L Double-Jacketed Glass Reactor with Baffle Plate |
| Capacity | 1 L |
| Jacket Type | Dual vacuum-insulated jacket |
| Operating Temperature Range | −90 °C to +230 °C |
| Thermal Shock Limit (ΔT) | 60 °C |
| Pressure Range | 666 Pa (vacuum) to ambient pressure |
| Wetted Materials | Borosilicate glass 3.3, PTFE, FFKM, FKM |
| Lid Ports | 6 (SQG 29/42 × 1, TS 29/42 × 1, TS 24/40 × 4) |
| Max Stirring Speed | 800 rpm |
| Dimensions (W×D×H) | 380 mm × 380 mm × 1206 mm |
| Weight | 22 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | 1L Dual-Jacketed Reactor |
| Capacity | 1 L |
| Jacket Type | Dual (inner & outer thermal isolation) |
| Operating Temperature Range | −90 °C to +230 °C |
| Thermal Shock ΔT | 60 °C |
| Pressure Range | 666 Pa (vacuum) to ambient |
| Wetted Materials | Borosilicate Glass 3.3, PTFE, FFKM, FKM |
| Lid Ports | 6 (SQG 29/42 × 1, TS 29/42 × 1, TS 24/40 × 4) |
| Max Stirring Speed | 800 rpm |
| Dimensions (W×D×H) | 380 mm × 380 mm × 1206 mm |
| Weight | 21 kg |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | 1L Filtration Reactor |
| Vessel Capacity | 1 L |
| Jacketed Design | Yes |
| Operating Temperature Range | −90 °C to +200 °C |
| Thermal Shock Resistance (ΔT) | 110 °C |
| Operating Pressure Range | 666 Pa to ambient pressure |
| Wetted Materials | Borosilicate Glass 3.3, PTFE, FFKM, FKM |
| Lid Ports | 6 (SQG 29/42 × 1, TS 29/42 × 1, TS 24/40 × 4) |
| Maximum Agitator Speed | 800 rpm |
| Dimensions (W×D×H) | 380 mm × 380 mm × 1206 mm |
| Weight | 28 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | 5L Dual-Jacketed Baffle-Equipped Reactor |
| Capacity | 5 L |
| Jacket Type | Dual (inner heating/cooling jacket + outer vacuum insulation layer) |
| Operating Temperature Range | −90 °C to +230 °C |
| Thermal Shock Limit (ΔT) | 60 °C |
| Pressure Range | 666 Pa (0.5 mbar) to atmospheric pressure |
| Wetted Materials | Borosilicate Glass 3.3, PTFE, FFKM, FKM |
| Lid Ports | 6 (SQG 29/42 ×1, TS 29/42 ×1, TS 24/40 ×4) |
| Max Stirring Speed | 800 rpm |
| Dimensions (W×D×H) | 380 mm × 380 mm × 1206 mm |
| Weight | 28 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | 5L Dual-Jacketed Reactor |
| Capacity | 5 L |
| Jacket Configuration | Dual (inner heating/cooling jacket + outer vacuum insulation jacket) |
| Operating Temperature Range | −90 °C to +230 °C |
| Maximum Thermal Shock ΔT | 60 °C |
| Operating Pressure Range | 666 Pa (0.5 mbar) to ambient |
| Wetted Materials | Borosilicate Glass 3.3, PTFE, FFKM, FKM |
| Lid Ports | 6 × standardized ground joints (SQG 29/42 ×1, TS 29/42 ×1, TS 24/40 ×4) |
| Max Stirring Speed | 800 rpm |
| Footprint | 380 mm × 380 mm |
| Height | 1206 mm |
| Net Weight | 28 kg |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | 5L Filter Reactor |
| Vessel Capacity | 5 L |
| Jacketed Design | Yes |
| Operating Temperature Range | −90 °C to +200 °C |
| Thermal Shock Resistance (ΔT) | 110 °C |
| Operating Pressure Range | 666 Pa to atmospheric |
| Wetted Materials | Borosilicate Glass 3.3, PTFE, FFKM, FKM |
| Lid Ports | 6 (SQG 29/42 × 1, TS 29/42 × 1, TS 24/40 × 4) |
| Maximum Agitator Speed | 800 rpm |
| Dimensions (W×D×H) | 380 mm × 380 mm × 1206 mm |
| Weight | 33 kg |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | 5L Pressurized Filtration Reactor |
| Vessel Capacity | 5 L |
| Construction | Single-layer borosilicate glass 3.3 vessel |
| Operating Temperature Range | −90 °C to +200 °C |
| Thermal Shock Resistance (ΔT) | 110 °C |
| Pressure Rating | Full vacuum to 0.2 MPaG (2 barg) |
| Wetted Materials | Borosilicate glass 3.3, PTFE, FFKM, FKM |
| Lid Ports | 6 × standardized ground joints (SQG 29/42 × 2, SQG 24/40 × 4) |
| Maximum Stirring Speed | 200 rpm |
| Dimensions (W × D × H) | 455 mm × 432 mm × 1206 mm |
| Weight | 39 kg |
| Modular Configuration | Integrated filtration & drying capability |
| Sealing System | Reinforced magnetic or mechanical shaft seal with leak-proof base design |
| Filtration Base | Removable, pressure-rated sintered frit or filter plate assembly |
| Accessories Included | Pt100 temperature probe, analog pressure gauge, pressure relief valve, quick-connect fluid ports with integrated shut-off valves, PTFE/FFKM-sealed discharge valve |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | AG! 1L Pressure Filtration Reactor |
| Vessel Capacity | 1 L (Note: corrected from misleading “5L” in description |
| Operating Temperature Range | −90 °C to +200 °C |
| Thermal Shock Resistance (ΔT) | 110 °C |
| Operating Pressure Range | Full Vacuum to 0.2 MPa (2 bar(g)) |
| Wetted Materials | Borosilicate Glass 3.3, PTFE, FFKM, FKM |
| Lid Ports | 6 × standardized ground joints (2 × SQG 29/42, 4 × SQG 24/40) |
| Max Stirring Speed | 200 rpm |
| Dimensions (W×D×H) | 455 mm × 432 mm × 1206 mm |
| Net Weight | 33 kg |
| Compliance | Designed per DIN 7080, EN ISO 15500-1, and CE Machinery Directive 2006/42/EC |
| Software Interface | None (standalone mechanical/electromechanical system) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported |
| Model | EasySyn 1000 Advanced |
| Reactor Type | Jacketed Glass Reactor |
| Usable Volume | 1 L |
| Operating Pressure Range | Low-pressure / Vacuum-compatible |
| Vacuum Level | 3 mbar |
| Construction Material | Borosilicate Glass 3.3 |
| Temperature Range | –50 °C to +200 °C |
| Stirrer Motor | EUROSTAR 100 control (Max. Torque: 100 N·cm) |
| Stirring Shaft Seal | High-integrity vacuum-rated mechanical seal |
| Vessel Fixation | DN 100 flange with FEP-coated O-ring |
| Lid Ports | 1 × NS 29/32 central, 2 × NS 29/32 lateral, 1 × NS 14/23 auxiliary |
| Drain System | LT 5.40 quick-drain module with valved thermal bath fluid lines |
| Control Interface | RS232 and USB |
| Software Integration | labworldsoft® 6 (optional external automation) |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | EasySyn 1000 Advanced Reactor System |
| Rated Volume | 1 L |
| Minimum Usable Volume | 120 mL |
| Minimum Sample Volume with Temperature Sensor | 260 mL |
| Operating Temperature Range | −50 to 200 °C |
| Maximum Vacuum | 3 mbar (process), 25 mbar (seal rating) |
| Stirring Shaft Max Torque | 100 N·cm |
| Flange Size | DN 100 |
| Dimensions (W × H × D) | 500 × 950 × 580 mm |
| Interfaces | RS-232, Micro-USB |
| Jacket Drain System | LT 5.40 Quick-Drain Unit |
| Vessel Material | DIN 3.3 borosilicate glass |
| Bottom Valve | Spring-loaded PTFE-coated glass valve |
| Lid Ports | 1 × NS 29/32 central, 2 × NS 29/32 side, 1 × NS 14/23 |
| Stirrer | EUROSTAR 100 control with keyless chuck, integrated timer, overload protection & temperature input |
| Agitator Blade | PTFE-coated helical impeller |
| Seal Type | High-vacuum mechanical seal rated to 25 mbar |
| Software Control | labworldsoft® 6 (RS-232 optional) |